Used Turning automatic lathes for sale (252)

Condition: new, Year of construction: 2022, Functionality: fully functional, TAKAMAZ CNC Compact loader FC60 Lathe with automatic loader unloader quickest loading system in the world loading time new part 2,8 sec. loading cap. till 60 mm diameter. loading lenght max 50 mm max weight 1 kg per side loading feed 120 m min include part turning for loading Fanuc Control full warranty 2 year Lathe spec. Spindle motor 7,5/5,5 kw turning diameter max 180 mm turning lenght 240 mm bar cap. 35 mm collet chuck 173E till 40 mm diameter spindle nose A2-5 spindle speed 4500 rpm tool pos 8 stations tool shank 20x20 mm boring holder 25 mm diameter rapid speed X/Z 18/24 meter Bwsljm E I D Hsn Uf Rrol machine dimension 1,36 x 1,37 meter height 1,7 meter weight 2,7 ton total power 14 KVA installation and training not included. ( price depend on loacation and on request)

Condition: new, Year of construction: 2024, -10 linear axes - Ultra-powerful clamping - Rework spindle and its dedicated 9-position carriage (X4) enable you to carry out complex operations in masked time. Beln Uf Reu Ik Tisrewl - Spindle capacity: 8000 rpm - Oil-cooled electro-spindle - Latest-generation FANUC 31i numerical control - Compact cast-iron structure

Condition: good (used), Year of construction: 2018, KSI TCM 38 CNC sliding headstock lathe, Year of manufacture 2018, Fanuc Oi-TF control system, Bar machining up to 38 mm, LNS XH 552 loading magazine, Counter spindle up to 6,000 rpm, spindle speed main spindle up to 8,000 rpm, 2 x C axis, tools attached, Bsln Uouixvfef Rrswl 16 tools, max. turning length 300 mm,

Condition: new, turning diameter over bed 360 mm turning diameter over slide rest 220 mm turning length 1000 mm turning diameter in the gap 380 mm turning speeds 70 - 2000 U/min centre height 180 mm spindle bore 50 mm tailstock quill taper MT 3 MK connected load frequency 230 oder 400 V total power requirement 1,8 kW weight of the machine ca. 0.65 t dimensions of the machine ca. 2,0 x 0,8 x 1,56 m Professional industrial machine 3-axis digital display 3-jaw chuck 180 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bslnoupxucj Uf Rrowl Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine tools

Condition: good (used), Year of construction: 2014, STAR MICRONICS SB-20R Type G sliding headstock automatic lathe, no. 0174 (008), year of manufacture 2014, FANUC Series 0I-T control, together with IEMCA Elite 220 Evo bar feeder, type 32 XL, no. 021510VA04, year of manufacture 2015 Bwjln Uf Roun N Nhjrsl

Condition: ready for operation (used), Year of construction: 2011, Functionality: fully functional, machine/vehicle number: 8086010645B, turning length: 320 mm, spindle speed (max.): 6,500 rpm, turning diameter: 42 mm, travel distance X-axis: 50 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 120 mm, TECHNICAL DETAILS Control: Fanuc 160i Workpiece diameter: max. 42 mm Workpiece length: max. 320 mm Bar passage: max. 42 mm X-axis travel: max. 50 mm Y-axis travel: max. 350 mm Z-axis travel: max. 120 mm Main spindle Spindle speed: 6,500 rpm Counter spindle spindle speed: 6,500 rpm Bweln Uf Reunrqhjrol Axes Number of linear axes: 6 Number of C-axes: 2 MACHINE DETAILS Weight: 4,700 kg Connected load: 40 kVA EQUIPMENT - Loading magazine Iemca Boss 545E 32 LL, 2011 - High-pressure system with integrated oil cooling - Kraft and Bauer extinguishing system - Chip conveyor system - Parts conveyor belt - Machine documentation

Condition: excellent (used), Year of construction: 2011, operating hours: 2,132 h, Functionality: fully functional, machine/vehicle number: 501, spindle motor power: 3,700 W, turning diameter: 20 mm, rotational speed (max.): 10,000 rpm, machining length: 250 mm, TECHNICAL DETAILS Main spindle Control: FANUC 31I - model A turning diameter: 20 mm Machining length: 250 mm Speed: 10,000 rpm Spindle power: 3.7 kW Counter spindle Speed: 10,000 rpm Spindle power: 2.2 kW Bweloum T Hhsn Uf Rrsl B-axis Max. Drilling diameter: diam. 6 Max. Thread diameter: M5 Max. Spindle speed: 5,000 rpm MACHINE DETAILS Weight: 3.3 tons Dimensions: 2200 x 1400 x 1900 mm Switch-on time: 25,139 h or 1,508,330 min Processing time: 2,132 h or 127,879 min Cutting time: 979 h or 58,736 min EQUIPMENT - Bar loader IEMCA BOSS 332 - Chip conveyor

Condition: new, K’MX EVO with 7 axes has been designed for machining of parts from Ø 3 to Ø 32 mm. The highlight of this series is 2 oil-cooled electrospindles (built-in motor), with a power output of 10.5 kW on the main spindle. The stroke of the spindle is up to 400 mm. The two separate tools racks can simultaneously machining (ex roughing and finishing). The two separate tools racks can simultaneously machining (ex roughing and finishing). Optionally, both linear slides are equipped with driven tools to perform simultaneous drilling and milling. These 2 tools racks are complemented by end working attachment for internal operations with the possibility to turn simultaneously on the main and sub-spindle. In optional, possibility to mill thanks to ddriven tools. The large space permits better chip evacuation and maximum accessibility. - Rigid - Large working space Beln Ufouq A D Rj Rrowl - Up to 4 simultaneous cutting tools in contact - 2 independent racks with 5 positions

Condition: excellent (used), Year of construction: 2021, operating hours: 3,145 h, Functionality: fully functional, operating hours of spindle: 3,144 h, Equipment: chip conveyor, CNC control FANUC 0i-TD with 7 axes - C-axis on main spindle and counter spindle - convertible from sliding headstock to fixed headstock turning In very good condition and with extensive equipment HFT - High-Frequency-Turning: With this revolutionary technology, you now have chip formation under control. Thanks to HFT, chip problems are a thing of the past. Can theoretically be used with all known materials. Delivery / removal: in week 35 or week 39 or by arrangement TECHNICAL DETAILS Main and counter spindle collet type: E145 Guide bush unit: T223, synchronously driven Standard equipment: Tool holder Slide: Linear slide Tool holder: 6-fold - shank 12x12mm Cross drilling attachments: 2x ER11 + 2x ER16 (331-50) Drilling device for front/rear face machining: 4 drilling quills (2x ER16 single (301-24), 2x ER16 double (421-22)) If the 4-fold drilling unit is not used, 5 cross drilling units can be used Drive unit: for tools for main side machining Counter spindle: for back machining Back machining: 4x ER16 (541-21) Drive unit: for tools for rear side machining on 4 stations Workpiece ejection device: mechanical MACHINE DETAILS Machine dimensions: approx. 2,070 x 1,177 x 1,760 mm Machine weight: approx. 1,800 kg Control switch-on time: 18,492 h Beln Uf Rsuglwksrswl Workpiece counter: 887,105 pieces Coolant pump: 2.2 bar, approx. 50-75 l/min Coolant application: Oil Loading magazine: FMB micromag 20 / 3200 attachment variant "A" Bar diameter: 0.8 - 20 mm Loading magazine dimensions: approx. 5015 x 720 x 1700 mm Loading magazine weight: approx. 600 kg Hinged belt conveyor: MAYFRAN type MT 10 High-pressure system: SFB-200eco Capacity: 100 bar at 20 l/min / 200 liter tank / 40 µm spin-on filter / 4-fold valve Medium: Cutting oil Peripheral HP system dimensions: approx. 1500 x 500 x1000 mm Weight of peripheral HP system: approx. 250 kg Dimensions periphery & accessories: approx. 1900 x 700 x 800 mm Weight of peripherals & accessories: approx. 200 kg EQUIPMENT - CE declaration of conformity - Part ejection control - Workpiece collector - Blow-out device for counter spindle - Workpiece conveyor for ejecting the workpieces - Separate coolant tank with level and flow monitoring - Automatic central lubrication with level monitoring - Tool box with special tools - PCMCIA card slot - USB interface - RJ-45 LAN interface - RS 232 C interface - Control functions included as standard - Program sequence can be controlled via handwheel - High-speed skip function for the use of touch probes - Spindle speed monitoring - Thread chasing with variable pitch - Cutting edge radius compensation - Macro programming - Multiple repeat cycles - Drilling cycles - Constant cutting speed for main spindle and counter spindle - Cylindrical interpolation - Polar coordinate interpolation - Polygon turning - Rigid tapping - Z1 - Z2 Synchronous control - C1 - C2 Synchronous control - Synchronous rotation/phase control of the main and counter spindles There is the possibility of acquiring further objects such as clamping devices, tool holders, carbide tools, measuring devices, measuring machines, cooling medium etc. in high quality at a favorable price due to the discontinuation of the trade. Shipping, dismantling and loading costs can be reduced when purchasing several auction machines from the same seller.

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, CNC turning and milling center | INDEX - ABC equipped with bar loader. TECHNICAL DETAILS Control: INDEX C200 - 4D Rated power: 33kW Operating voltage: 400 V, 50 Hz Bwolsuf Tbuon Uf Rrol Machine mass: 2500 kg Weight of cabinet: 460 kg

Condition: good (used), Year of construction: 1999, STAR MICRONICS SR-20 sliding headstock automatic lathe, type 530 G, no. 010947, year of manufacture 1999, FANUC Series 16-T control, chip conveyor, together with FMB Turbo 3-26 bar loader Bwslnjunvy Ho Uf Rrel

Condition: new, turning diameter over bed 400 mm turning diameter over slide rest 280 mm turning length 1000 mm turning diameter in the gap mm turning speeds 70 - 2000 U/min centre height 195 mm spindle bore 54 mm tailstock quill taper MT 3 MK connected load frequency 400 V total power requirement 2,2 kW weight of the machine ca. 0.85 t dimensions of the machine ca. 1,95 x 1,0 x 1,75 m Professional industrial machine 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Boln Uf Rsp U Ut Asrswl Feed protection Machine feet Machine tool

Condition: good (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: XD20BB0393, turning length: 210 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, equipped with Iemca Boss 332E-r/32 barfeed new in 2008 with 12 mm guide channels - chip conveyor - Fanuc 18i-TB Control Bslnor Arwuj Uf Rrewl

Condition: new, K’MX EVO with 7 axes has been designed for machining of parts from Ø 3 to Ø 32 mm. The highlight of this series is 2 oil-cooled electrospindles (built-in motor), with a power output of 10.5 kW on the main spindle. The stroke of the spindle is up to 400 mm. The two separate tools racks can simultaneously machining (ex roughing and finishing). The two separate tools racks can simultaneously machining (ex roughing and finishing). Optionally, both linear slides are equipped with driven tools to perform simultaneous drilling and milling. Bwslounr H Asn Uf Rrsl These 2 tools racks are complemented by end working attachment for internal operations with the possibility to turn simultaneously on the main and sub-spindle. In optional, possibility to mill thanks to ddriven tools. The large space permits better chip evacuation and maximum accessibility. - Rigid - Large working space - Up to 4 simultaneous cutting tools in contact - 2 independent racks with 5 positions

Condition: excellent (used), Year of construction: 2013, operating hours: 26,897 h, Functionality: fully functional, Star SR 20J Type C sliding headstock automatic lathe in very good condition and with extensive equipment Delivery / removal: in week 35 or week 39 or by arrangement TECHNICAL DETAILS Control: Fanuc series 31i-B Axes: 7 pieces Main and counter spindle collet type: E145 Guide bush unit: synchronously driven Guide bush type: T223 Slide: Linear slide Tool holder: 6-fold, shank 12x12 mm Cross drilling attachments: 3 x ER16 + 2 x ER16 (331-50) Drilling device for front/rear face machining: 4 ER16 drilling quills (301-25) Deep-hole drilling device: 2 ER16 drilling quills (681-21) Drive unit: for tools for main side machining Counter spindle: for rear end machining Rear end machining: 4 x ER16 (541-21) Drive unit for tools for rear end machining: 4 stations MACHINE DETAILS Machine dimensions: approx. 2,200 x 1,102 x 1,700 mm Machine weight: approx. 2,200 kg Control switch-on time: 77,328 h Processing time: 26,897 h Workpiece counter: 3,698,812 pieces Bar loading magazine: FMB TURBO 3-36 / 3200 Bar capacity: 3-36 mm attachment variant "A" Loading magazine dimensions: approx. 4,400 x 800 x 1,800 mm Loading magazine weight: approx. 800 kg HP high-pressure system: SFB / 100 bar / 4 valves / 40 µm Tank volume: approx. 80 - 100 l HD system dimensions: approx. 800 x 700 x 900 mm Weight of peripherals & accessories: approx. 150 kg Hinged belt conveyor: MAYFRAN Dimensions peripherals & accessories: approx. 1,900 x 700 x 800 mm Weight of peripherals & accessories: approx. 200 kg EQUIPMENT - Cut-off steel breakage protection - Mechanical workpiece ejection device - Part ejection control - Blow-out device for counter spindle - Workpiece collector - Workpiece conveyor for discharging the workpieces - Separate coolant tank with level and flow monitoring Bjln Ufjuglvgj Rrjwl - Automatic central lubrication with level monitoring - PCMCIA card slot - USB interface - RJ-45 LAN interface - RS 232 C interface - 128 KB program memory - 98 tool wear corrections per channel - Program sequence controllable via handwheel - High speed skip function for the use of touch probes - Spindle speed monitoring (G25 - G26) - Cutting edge radius compensation (G40 - G42) - Macro programming (G65 - G67) - Multiple repeat cycles (G70 - G76) - Drilling cycles (G80 - G89) - Constant cutting speed for main spindle and counter spindle (G96 - G97) - Cylindrical interpolation (G107) - Polar coordinate interpolation (G112 - G113) - Helical interpolation (spiral milling) - Rigid tapping (M29) - Z1 - Z2 Synchronous control (M40 - M41) - C1 - C2 Synchronous control (M54 - M55) - Synchronous rotation/phase control of the main and counter spindles (M82 - M83) - Coolant used in the machine: Oil - HFT (High-Frequency-Turning) - Operating and maintenance manual - Operating tools - CE Declaration of Conformity - Small extinguishing system Kraft and Bauer and extinguishing agent container CO2 (10 kg) There is the possibility of acquiring further objects such as clamping devices, tool holders, HM tools, measuring devices, measuring machines, cooling medium etc. in high quality at a favorable price due to the discontinuation of the trade. Shipping, dismantling and loading costs can be reduced when buying several auction machines from the same seller.

Condition: excellent (used), Year of construction: 2004, operating hours: 43,000 h, Functionality: fully functional, turning length: 200 mm, rotational speed (max.): 10,000 rpm, bar passage: 16 mm, CNC sliding headstock lathe with 6 axes. TECHNICAL DETAILS 6 axes: X1 / Z1 / Y1 / C1 / X2 / Z2 Bars: max. 16 mm Turning length: max. 200 mm Main spindle speed: max. 10,000 rpm Counter spindle diameter: max. 16 mm Counter spindle speed: max. 10,000 rpm C-axis: 0.001° Tool holder: 17 tools (linear tool holder, front attachment, rear machining) EQUIPMENT Bjln Uf Rot N Srhorswl - Spindle indexing - Parts conveyor belt - Chip conveyor - Fire extinguishing system - Loading magazine IEMCA Genius 118/3200 Year of construction 2005

Condition: excellent (used), Citizen M32 Model M3 CNC Lathe (2002) y axes Platten, Bweln Uf Rotv Nkpsrel swarf, Absolent Ventilation System, Cool Blaster Chiller-high pressure, M-32 M22032/0622 2002, P13155, fire suppression device. Tooling. New 2002.

Condition: new, turning diameter over bed 320 mm turning diameter over slide rest 200 mm turning length 900 mm turning diameter in the gap mm turning speeds 75 - 2000 U/min centre height 160 mm spindle bore 50 mm tailstock quill taper MT 3 MK connected load frequency 230 V total power requirement 1,5 kW weight of the machine ca. 0,29 t dimensions of the machine ca. 2,0 x 0,8 x 1,56 m Professional lathe 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Bwoln Uf Ronq Sayorsl Hardened and ground bed tracks Complete coolant system feed protection machine tools

Year of construction: 2023, Condition: new, The K’MX 920 CLEVER sliding headstock automatic lathe is designed for machining complex workpieces up to Ø 20 mm. The lathe is equipped as standard with two electrospindles with a maximum speed of 12.000 rpm each. With its nine axes, comb + turret on three axes and independent end unit, this machine is capable of having four tools in the material for an optimised cycle time. Beljk Dz Disn Uf Rrjwl 9 linear axis 1 independent rack with 10 positions Cross-section of outer tools 12 x 12 mm Turret number of stations 12

Condition: excellent (used), Year of construction: 2001, operating hours: 56,758 h, Functionality: fully functional, machine/vehicle number: 0151(017), turning length: 310 mm, spindle speed (max.): 7,000 rpm, spindle bore: 32 mm, controller manufacturer: Fanuc, controller model: Serie 16i-T, number of slots in tool magazine: 10, Star SV 32 sliding headstock automatic lathe in very good condition and with extensive equipment HFT - High-Frequency-Turning: With this revolutionary technology, you now have chip formation under control. Thanks to HFT, chip problems are a thing of the past. Can theoretically be used with all known materials. Delivery / removal: in week 35 or week 39 or by arrangement TECHNICAL DETAILS Control: Fanuc series 16i-T Axes: 9 pieces Bar diameter: max. 32 mm Turning length: max. 310 mm Main spindle speed: max. 7,000 rpm Main and counter spindle collet type: F37 Counter spindle: for back machining Counter spindle diameter: max. 32 mm Counter spindle speed: max. 7,000 rpm Slide: linear slide Tool holder: 4-fold with shank 16x16 mm Cross drilling units: 3 x ER16 (machining stations) Turret: 10 stations MACHINE DETAILS Coolant used in the machine: Oil Machine dimensions: 2,645 x 1,405 x 1,700 mm Weight of the machine: 3,800 kg Connected load: 8.0 kVA Cutting time: 56,757 h Switch-on time: 83,338 h Parts counter: 3,306,721 pieces Bar loading magazine: FMB TURBO 3-36 / 3200 Bar capacity: 3 - 36 mm (attachment variant "A") HP high-pressure system: SFB type 510008 / 150 bar / 4 valves / 40 µm Tank volume: approx. 80 - 100 l Hinged belt conveyor: MAYFRAN Machine dimensions: approx. 1,700 x 2,512 x 1,700 mm Machine weight: approx. 3,800 kg Loading magazine dimensions: approx. 4,500 x 1,000 x 1,800 mm Weight of loading magazine: approx. 1,800 kg Dimensions of peripherals & accessories: approx. 1,900 x 700 x 800 mm Weight of peripherals & accessories: approx. 200 kg HD system dimensions: approx. 800 x 700 x 900 mm Weight of peripherals & accessories: approx. 150 kg Bwoln Ujuglu Nof Rrjl EQUIPMENT - Workpiece ejection device: available, mechanical - Workpiece conveyor for ejecting the workpieces - Automatic central lubrication with level monitoring - PCMCIA card slot - RS 232 C interface - Small extinguishing system Kraft and Bauer and CO2 extinguishing agent container (10 kg) - CE declaration of conformity - Operating and maintenance manual - Operating tools Due to the discontinuation of the business, it is possible to purchase additional objects such as clamping devices, tool holders, carbide tools, measuring devices, measuring machines, cooling medium etc. in high quality at a favorable price. Shipping, dismantling and loading costs can be reduced when purchasing several auction machines from the same seller.

Year of construction: 2004, Condition: excellent (used), Swiss type lathes MANURHIN K'MX overhauled with : – Spindle, counter spindle, geometry and changes of all non-conforming parts. Rotating tool on: rear comb, front comb, end unit, radial and axial counter operation C-axis on: main spindle and counter spindle Bwjlnsir Id Us Uf Rrel Rigid tapping on: main spindle and backworking spindle High-pressure Predispo Year of construction 2004 – approx. 22 000 h

Condition: excellent (used), Year of construction: 2016, operating hours: 17,307 h, Functionality: fully functional, spindle motor power: 3,700 W, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, spindle bore: 24 mm, axle configuration: 4x2, Hanwha XD-20V sliding headstock automatic lathe in very good condition and with extensive equipment Delivery / removal: in week 35 or week 39 or by arrangement TECHNICAL DETAILS CNC control: FANUC 32i-B with 8 axes MAIN SPINDLE Bjln Ujuglupef Rrswl Turning diameter: max. 20 mm Spindle bore diameter: max. 24 mm Maximum speed: 10,000 rpm Maximum power: 3.7 kW C-axis indexing: 0.001° Stroke Z1: 210 mm Guide bush unit: synchronously moving Guide bush type: 22.001 / T223 Type of collet chuck: 145E / F25 COUNTER SPINDLE Maximum speed: 8,000 rpm Maximum power: 3.7 kW Pick-up diameter: max. 20 mm Part length ejection to the front: 80 mm C-axis indexing: 0.001° Stroke Z2: 210 mm Type of collet chuck: 145E / F25 TOOLING OPTIONS Tool slide X1,Y1: Tool holder plate for 6 external turning tools 12 x 12 mm Number of cross drilling/milling units: 5 driven modular drilling/milling spindles Tools for cross drilling/milling unit: 2 x ER16 - 3 x ER11 Power: 1.0 kW (S6000) Capacity front drilling unit: 5 drilling quills Rear machining: with Y2 axis Tool carrier capacity: 8 tools Number of driven/fixed spindles: 4 / 4 ER16 modular Rapid traverse per axis: 40 m/min MACHINE DETAILS Connected load: 15 kVA Machine dimensions: approx. 2460 x 1380 x 1730 mm Machine weight: approx. 2900 kg Coolant used in the machine: oil Processing time: 17,307 h Control switch-on time: 44,683 h Parts counter: 1,992,363 pieces Bar loading magazine: FMB Turbo 2 - 20 Attachment variant "A": 2 - 23 / 3200 mm Loading magazine dimensions: approx. 4220 x 620 x 1800 mm Loading magazine weight: approx. 600 kg HP high-pressure system: SFB M60 eco / 150 bar Flow rate: 24 l/min Number of valves: 4 Changeover filter: 2 x 40 µm Tank size: approx. 280L HD system dimensions: approx. 1660 x 612 x 1500 mm Weight of peripherals & accessories: approx. 300 kg Dimensions peripherals & accessories: approx. 1900 x 700 x 800 mm Weight of peripherals & accessories: approx. 200 kg Dimensions peripherals & accessories: approx. 1900 x 700 x 800 mm Weight of peripherals & accessories: approx. 300 kg EQUIPMENT - Alignment shoes with leveling elements - Service tool set - Work area light - Signal lamp (3-color) - Safety door switch with interlock - Maintenance and central lubrication unit (1.8 liter lubricating oil volume) - Coolant flow monitoring - Pneumatic blow-out device for the pick-up spindle gripper - Manual and documentation - Maintenance and operating instructions incl. parameter list and test log - Hinged belt conveyor - Small extinguishing system Kraft and Bauer and CO2 extinguishing agent container - LCD/MDI color monitor - Automatic switch-off function PowerOff - Program check function (test run possible via handwheel) - Continuous thread cutting cycle - Runtime display / parts counter - CF card interface - Tool radius compensation - Absolute reference point - Self-diagnosis function - Interface for JBS - Parts conveyor belt with collecting tray - 1° indexing on pick-up spindle - Chip conveyor with coolant pump - CE declaration of conformity There is the possibility of acquiring further objects such as clamping devices, tool holders, carbide tools, measuring devices, measuring machines, cooling medium etc. in high quality at a favorable price due to the discontinuation of the trade. Shipping, dismantling and loading costs can be reduced when purchasing several auction machines from the same seller.

Condition: excellent (used), Year of construction: 2020, operating hours: 5,494 h, Functionality: fully functional, operating hours of spindle: 5,493 h, Equipment: chip conveyor, CNC control FANUC 0i-TD with 7 axes - C-axis on main spindle and counter spindle - convertible from sliding headstock to fixed headstock turning In very good condition and with extensive equipment HFT - High-Frequency-Turning: With this revolutionary technology, you now have chip formation under control. Thanks to HFT, chip problems are a thing of the past. Can theoretically be used with all known materials. Delivery / removal: in week 39 or by arrangement TECHNICAL DETAILS Main and counter spindle collet type: E145 Guide bush unit: T223, synchronously driven Standard equipment: Tool holder Slide: Linear slide Tool holder: 6-fold - shank 12x12mm Cross drilling units: 2xER11 + 2x ER16 (331-50) Drilling device for front/rear face machining: 4 drilling quills (2x ER16 single (301-24), 2x ER16 double (421-22)) If the 4-fold drilling unit is not used, 5 cross drilling units can be used Drive unit: for tools for main side machining Counter spindle: for back machining Back machining: 4x ER16 (541-21) Drive unit: for tools for rear side machining on 4 stations Workpiece ejection device: mechanical MACHINE DETAILS Machine dimensions: approx. 2,070 x 1,177 x 1,760 mm Machine weight: approx. 1,800 kg Operating hours / cutting time: 5,494 h Control switch-on time: 18,553 h Piece counter: 818,798 pieces Coolant pump: 2.2 bar, approx. 50-75 l/min Coolant application: oil Loading magazine: FMB micromag 20 / 3200 attachment variant "A" Bar diameter: 0.8 - 20 mm Loading magazine dimensions: approx. 5015 x 720 x 1700 mm Loading magazine weight: approx. 600 kg Hinged belt conveyor: MAYFRAN type MT 10 High-pressure system: SFB-200eco Capacity: 100 bar at 20 l/min / 200 liter tank / 40 µm spin-on filter / 4-fold valve Medium: Cutting oil Peripheral HP system dimensions: approx. 1500 x 500 x1000 mm Weight of peripheral HP system: approx. 250 kg Dimensions periphery & accessories: approx. 1900 x 700 x 800 mm Weight of peripherals & accessories: approx. 200 kg EQUIPMENT - CE declaration of conformity - Part ejection control - Workpiece collector - Blow-out device for counter spindle - Workpiece conveyor for ejecting the workpieces - Separate coolant tank with level and flow monitoring - Automatic central lubrication with level monitoring - Tool box with special tools - PCMCIA card slot - USB interface - RJ-45 LAN interface - RS 232 C interface - Control functions included as standard - Program sequence can be controlled via handwheel - High-speed skip function for the use of touch probes - Spindle speed monitoring - Thread chasing with variable pitch - Cutting edge radius compensation - Macro programming - Multiple repeat cycles - Drilling cycles - Constant cutting speed for main spindle and counter spindle - Cylindrical interpolation - Polar coordinate interpolation Bjln Ufjufh Tfj Rrjwl - Polygon turning - Rigid tapping - Z1 - Z2 Synchronous control - C1 - C2 Synchronous control - Synchronous rotation/phase control of the main and counter spindles There is the possibility of acquiring further objects such as clamping devices, tool holders, carbide tools, measuring devices, measuring machines, cooling medium etc. in high quality at a favorable price due to the discontinuation of the trade. Shipping, dismantling and loading costs can be reduced when purchasing several auction machines from the same seller.

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 0499(061), turning length: 310 mm, spindle speed (max.): 7,000 rpm, spindle bore: 32 mm, controller manufacturer: Fanuc, controller model: Serie 16i-T, number of slots in tool magazine: 10, Star SV 32 sliding headstock automatic lathe in very good condition and with extensive equipment HFT - High-Frequency-Turning: With this revolutionary technology, you now have chip formation under control. Thanks to HFT, chip problems are a thing of the past. Can theoretically be used with all known materials. Delivery / removal: in week 35 or week 39 or by arrangement TECHNICAL DETAILS Control: Fanuc series 16i-T Axes: 9 pieces Rod diameter: max. 32 mm Turning length: max. 310 mm Main spindle speed: max. 7,000 rpm Main and counter spindle collet type: F37 Counter spindle: for back machining Counter spindle diameter: max. 32 mm Counter spindle speed: max. 7,000 rpm Slide: linear slide Tool holder: 4-fold with shank 16x16 mm Cross drilling units: 3 x ER16 (machining stations) Turret: 10 stations MACHINE DETAILS Coolant used in the machine: Oil Machine dimensions: 2,645 x 1,405 x 1,700 mm Bwjlsufh Ayen Uf Rrjl Weight of the machine: 3,800 kg Connected load: 8.0 kVA Bar feeder: FMB TURBO 3-36 / 3200 Bar capacity: 3 - 36 mm (attachment variant "A") HP high-pressure system: SFB type 510008 / 150 bar / 4 valves / 40 µm Tank volume: approx. 80-100L Hinged belt conveyor: MAYFRAN Machine dimensions: approx. 1,700 x 2,512 x 1,700 mm Machine weight: approx. 3,800 kg Loading magazine dimensions: approx. 4,500 x 1,000 x 1,800 mm Weight of loading magazine: approx. 1,800 kg Dimensions of peripherals & accessories: approx. 1,900 x 700 x 800 mm Weight of peripherals & accessories: approx. 200 kg HD system dimensions: approx. 800 x 700 x 900 mm Weight of peripherals & accessories: approx. 150 kg EQUIPMENT - Workpiece ejection device: available, mechanical - Workpiece conveyor for ejecting the workpieces - Automatic central lubrication with level monitoring - PCMCIA card slot - RS 232 C interface - Small extinguishing system Kraft and Bauer and CO2 extinguishing agent container (10 kg) - CE declaration of conformity - Operating and maintenance manual - Operating tools Due to the discontinuation of the business, it is possible to purchase additional objects such as clamping devices, tool holders, carbide tools, measuring devices, measuring machines, cooling medium etc. in high quality at a favorable price. Shipping, dismantling and loading costs can be reduced when purchasing several auction machines from the same seller.

Condition: excellent (used), Year of construction: 2008, operating hours: 60,501 h, Functionality: limited functionality, turning length: 205 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, controller manufacturer: Fanuc, controller model: Serie 18i-TB, number of slots in tool magazine: 19, Star 20-R-II sliding headstock automatic lathe in very good condition and with extensive equipment HFT - High-Frequency-Turning: With this revolutionary technology, you now have chip formation under control. Thanks to HFT, chip problems are a thing of the past. Can theoretically be used with all known materials. Delivery / removal: in week 35 or week 39 or by arrangement Condition: Rear block AGWs motor defective and has been deactivated in the Star Micronics control system. - The Star SR-20RII is otherwise in very good used, production-ready condition. No other defects are known TECHNICAL DETAILS Control system: Fanuc, Series 18i-TB, axes: 7 pieces - X / Z / Y / C1 / X1 / Z1 (C2) Rod diameter: max. 20 mm Turning length: max. 205 mm Main spindle speed: max. 10,000 rpm Indexing C-axis: 0.001° Counter spindle: with collet chuck Counter spindle speed: max. 8,000 rpm C-axis: available Tool holder capacity: 19 tools Tool holder types: linear tool holder, front attachment, rear machining Bjljufh Agsn Uf Rrswl MACHINE DETAILS Machine dimensions: 2,645 x 1,405 x 1,700 mm Weight of the machine: 3,800 kg Coolant used in the machine: oil Cutting time: 60,501 h Switch-on time: 89,282 h Bar loading magazine: FMB TURBO 3-36 / 3200 Bar capacity: 3-36 mm (attachment variant "A") Hinged belt conveyor: MAYFRAN Machine dimensions: approx. 2,200 x 1,102 x 1,700 mm Machine weight: approx. 2,200 kg Loading magazine dimensions: approx. 4,500 x 1,000 x 1,800 mm Weight of loading magazine: approx. 1,800 kg Dimensions of peripherals & accessories: approx. 1,900 x 700 x 800 mm Weight of peripherals & accessories: approx. 200 kg EQUIPMENT - Parts conveyor belt, - Coolant pump with increased delivery capacity - Operating and maintenance manual - Operating tools - CE declaration of conformity - Small extinguishing system Kraft and Bauer and CO2 extinguishing agent container (10 kg) - Operating and maintenance manual - Operating tools Due to the discontinuation of the trade, there is the possibility of acquiring further objects such as clamping devices, tool holders, carbide tools, measuring equipment, measuring machines, cooling medium etc. in high quality at a favorable price. Shipping, dismantling and loading costs can be reduced when purchasing several auction machines from the same seller.