Swiss type lathes MANURHIN K'MX 732 EVO

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, operating hours: 23,390 h, pressing force: 85 t, overall weight: 8,600 kg, controller model: TASC 6000, operating pressure: 300 bar, TECHNICAL DETAILS Fpodpjz Hxtdjfx Akysn Pressing force: 85 t Pressing force: 850 kN Operating pressure: 300 bar MACHINE DETAILS Control system: TASC 6000 Control voltage: 24 V Follow-up time: 95 ms Follow-up distance at 220 mm/s: 10 mm Follow-up distance at 160 mm/s: 8.5 mm Safety distance: 190 mm Voltage: 3 × 400 V Rated current: 24.0 A Frequency: 50 Hz Connected power: 17.0 kVA Compressed air connection: 6 bar Dimensions & Weight Dimensions (L × W × H): 2,500 × 1,500 × 2,000 mm Machine weight: 8,600 kg Operating hours, hydraulics: 23,390 h

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06007153/001, total height: 6,050 mm, total width: 3,380 mm, total length: 3,074 mm, load capacity per storage section: 210 kg, construction height: 6,050 mm, input voltage: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial Number: 06007153/001 Year of manufacture: 2006 Total load capacity: 2 x 33,550 kg Load per tray: Medium: 205 kg (evenly distributed) Tray dimensions: 3050 x 864 mm Number of trays: 36 units (more or heavier trays available upon request) Shuttle dimensions (W x D x H): 3380 x 3074 x 6050 mm (Height adjustable to available space) Power supply: 3/N/PE400 V, 11 A, 50/60 Hz, 4.9 kVA This offer is valid as long as the system is unsold Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 36 trays, Medium: 210 kg each, evenly distributed; more or heavier trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions (W x D x H): 3380 x 3074 x 6050 mm - System footprint approx.: 10.39 m² - Storage capacity with 36 trays: approx. 95 m², each tray approx. 2.64 m² - Electronic volume measuring system with 25 mm grid on the display - Access opening with sliding doors for protection of personnel and stored goods - C2000 Control System, with B/W OP2000 display Fpsdpfx Ajxq Tbtokyon - LED anti-glare lighting above access point - Toothed-belt drive for minimal noise - Toothed-belt drive for fastest order picking - Shelf spacing adjustable in 25 mm increments by configuring support profiles, ideal for high-density storage - Weight management system monitors the load per tray - Includes light pointer Price: On request only by e-mail Price: excluding VAT, including transport and installation Delivery time: from stock Machinehandel De Leeuw BV specializes in used paternoster systems from brands such as Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, pressing force: 86 t, stroke length: 215 mm, overall weight: 7,300 kg, TECHNICAL DETAILS Pressing force: max. 850 kN Stroke: max. 215 mm Operating pressure: max. 300 bar Follow-up time: max. 95 ms Follow-up travel at 220 mm/s: max. 10 mm Follow-up travel at 160 mm/s: max. 8.5 mm Safety distance: min. 190 mm Fpsdpfx Aez Hvgzskysn MACHINE DETAILS Voltage: 3 × 400 V Rated current: 24.0 A Frequency: 50 Hz Connected power: 17.0 kVA Control voltage: 24 V DC Compressed air connection: 6 bar Weight of the press: 7,300 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 800 h, load capacity: 300 kg, arm reach: 21,000 mm, working height: 37,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working height: 37 m Lateral reach: 21 m MACHINE DETAILS Self-weight: 18 t Load capacity: 300 kg Fpsdpfez Hz Hgsx Akyjn Operating hours: approx. 800 h Mileage: approx. 5,000 km EQUIPMENT Vertical H+H stabilizers with additional lifting capability SPEED version with automatic stabilization at the touch of a button Proportional electro-hydraulic control with speed adjustment for all movements Boom/cabin protection device Manual emergency pump Emergency stop button Automatic stabilization Load moment limiter for double safety Automatic stabilization control from the basket and from the ground Internally routed cables for protection Safety bypass Maintenance and repair history: complete, including inspection records

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 25.4 [mm] - Max. machining length : 200 [mm] - Spindle speeds : 10000 [rpm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] - Number of guide bush holders : 2 GUIDE BUSH HOLDER 1 - Number of positions : 5 GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] SECONDARY OPERATION - Number of positions : 7 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 14 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2270 x 1650 [mm] Fpedpouhaycsfx Akyon - Machine height : 2200 [mm] - Machine weight : 3500 [kg] MACHINE HOURS - Number of hours under power : 46571 [h] EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2 - Rotating guide bush - Parts catcher - Ejection of workpiece - Chips conveyor : KNOLL - Coolant tank * with high-pressure pump : 100 [bars] - Bar loader : TORNOS ROBOBAR SSF - Oil mist extractor : Elbaron - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, operating hours: 766 h, load capacity: 500 kg, arm reach: 7,500 mm, working height: 15,900 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working height: 15.90 m Lateral reach: 7.50 m Basket rotation: 90° + 90° Dimensions of aluminum basket: 1,200 × 700 × 1,100 mm Power outlet in the basket: 230 V Power outlet in the basket: 12 V Turret rotation: 700° Number of base plates: 4 MACHINE DETAILS Fjdpjz Hz D Sefx Akyepn Payload: approx. 500 kg Carrier vehicle: Piaggio Porter Operating hours: 766 h EQUIPMENT Hydraulic basket rotation Front basket mounting Pipes and cables installed in the boom Automatic closing of the boom section Automatic stabilization Lateral outriggers H + H with extra lift Automatic stabilization control from the basket and from the ground Proportional electro-hydraulic control with speed regulation of all movements Automatic engine speed regulation Possibility of simultaneous operation Display for centering the boom section in the basket Electronic CAN-BUS management system Powder-coated cataphoresis treatment Coming-home function Outline lighting for boom and turret Socage Connect Painting of boom and column parts in white, RAL 9016 Frame painting in black, RAL 9005 Painting of head and hydraulic cylinder in blue, RAL 5015

Condition: used, Year of construction: 1989, table length: 2,240 mm, table width: 1,400 mm, workpiece weight (max.): 5,000 kg, controller model: Siemens 840D, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item on time, no later than October 31, 2026! TECHNICAL DETAILS Longitudinal adjustment of the table (X-axis): 2,000 mm Transverse adjustment of the intermediate slide (Y-axis): 1,600 mm (1,500 mm) Vertical adjustment of the crossbeam (W-axis): 900 mm Adjustment of the drilling spindle (Z-axis): 400 mm Distance between the table clamping surface and the spindle head: min. 100 mm Distance between the table clamping surface and the spindle head: max. 1,400 mm Passage between the columns: 1,600 mm Workpiece weight max.: 5,000 kg Tool holder: SK 50 Table Width of the clamping surface: 1,400 mm Length of the clamping surface: 2,240 mm Clamping surface: 3.14 m² Number of T-slots: 9 T-slot width: 22 H7 mm Distance between T-slots: 160 mm Adjustment speeds Axis X: 0.1–4,000 mm/min Axis Y: 0.1–4,000 mm/min Fedpfx Akoz Hvyzjyjpn Axis Z: 0.1–4,000 mm/min Difference between adjacent feeds: 0.1 mm/min Rapid traverse speeds Axis X: 12,000 mm/min Axis Y: 12,000 mm/min Axis Z: 8,000 mm/min Axis ZW: 1,600 mm/min MACHINE DETAILS Control system: Siemens 840D Dimensions & Weight Space requirement (L × W × H): 7,000 × 6,500 × 5,300 mm Weight: 22,500 kg EQUIPMENT Comprehensive documentation All fluids will be drained before collection. Data backup has been saved to a USB drive. A 10-ton bridge crane is available on-site to assist with disassembly and loading. A forklift can be used if arranged in advance.

Condition: excellent (used), Year of construction: 2011, TECHNICAL DATA Linear Axes (Slides X, Y, Z) Travel distances: Axis X: 250 mm Axis Y: 200 mm Axis Z: 300 mm Rapid traverse (X, Y, Z): 30 m/min Feed force (X, Y, Z): 3700 N Resolution (X, Y, Z): 0.0001 mm Rotary Motion of Motor Spindle – Axis B Rotary travel range: -15° to +100° Rotary travel range (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Maximum speed: 20 rpm Drive torque: 750 Nm Hydraulic clamping: 50 bar Holding torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Power at 100% duty cycle: 10 kW Power at 25% duty cycle: 15 kW Nominal torque (100%): 8 Nm Nominal torque (25%): 12 Nm Speed range: 50 – 30,000 rpm Axis A (Bar capacity Ø 40 mm) Spindle type: A4 Max. bar diameter: 40 mm Max. speed: 35 rpm Drive torque (nominal): 112 Nm Drive torque (max.): 238 Nm Resolution: 0.0001° Axis clamping (Axis A): Pressure: 70 bar Holding torque: 130 Nm Tool Changer Number of tool discs: 2 Positions per disc: 24 Max. tool weight: 1 kg Rotational speed: 60 rpm Max. tool diameter (adjacent positions occupied): 50 mm Max. tool diameter (adjacent positions free): 63 mm Max. tool length (from spindle nose): 95 mm Coulisse de Reprise Travel distance: 80 mm Feed force: 1700 N Tilting moment: 90 Nm Resolution: 0.0001° Hydraulic pressure for tilting motion: 100 bar Workpiece Manipulator Pneumatic vertical slide gate: Ø 25 mm Stroke: 710 mm Linear travel per motor revolution: 70.4 mm/rev Max. transfer speed: 60 m/min Max. workpiece weight: 5 kg Max. manipulator stroke: 1120 mm (2×560 mm) Max. vertical travel: 150 mm Part pick-up Ø/length: Ø 32 mm / 100 mm Part ejection Ø/length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip force: 45 N (at 6 bar) Max. gripper opening: 14 mm (2×7 mm) Pneumatic Equipment Operating pressure: 6 bar Hydraulic System Operating pressure: 95 – 105 bar Coolant System Coolant tank volume: 80 liters Chip pan volume: 30 liters Kinematic viscosity in operation: 10 – 15 cSt SCOPE OF DELIVERY Includes (not limited to): Fpsdpfjwv Hnmox Akyen Willemin Macodel W 408 B machining center Extraction unit Fire suppression system Probe Coolant system Oil chiller Data backup Complete operator documentation Exact scope of delivery as per photo gallery No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: used, Year of construction: 2007, operating hours: 21,999 h, turning length: 170 mm, turning diameter: 140 mm, spindle speed (max.): 8,000 rpm, controller model: Mitsubishi Meldas, TECHNICAL DETAILS Turning diameter: 42 / 140 mm Turning length: 170 mm Spindle speed: 80–8,000 rpm C-axis: 0.001° Number of turrets: 2 Tool positions per turret: 12 Tool holder: VDI 20 Spindle speed for driven tools: 45–4,500 rpm Sub-spindle distance: 42 mm Spindle power: 1 kW Spindle speed: 60–6,000 rpm C-axis: 0.001° MACHINE DETAILS Control system: Mitsubishi Meldas Number of controlled axes: 8 Simultaneously machinable axes: 7 Collet chuck: 48 DIN 6343 Dimensions & Weight Footprint: approx. 2.4 × 1.6 × 2.2 m Machine weight: approx. 3.3 t Fedpfx Asz Ia Rgjkyopn Operating hours: 21,999 h EQUIPMENT Various tool holders, see images 5 axial driven tool holders Collet chuck for pressure collets, type 173E 15 pressure collets, type 173E Additional coolant cooler Chip conveyor Knoll, year of manufacture 2018 Simultaneous operation with 7 axes on main and sub-spindle Note: Complete battery replacement on 22.12.2025

Condition: ready for operation (used), Year of construction: 2000, operating hours: 28,027 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain Mill Plus, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Vertical machining center with a virtually new spindle (the machine received a new spindle after 23,919 operating hours)! TECHNICAL DETAILS Travel in X-axis: 800 mm Travel in Y-axis: 700 mm Travel in Z-axis: 600 mm Spindle Spindle speed: 18,000 rpm Tool holder: HSK 63 MACHINE DETAILS Internal coolant supply: 40 bar Control system Control system manufacturer: Heidenhain Control system model: Mill Plus Spindle operating hours: 28,027 h Spindle replacement at: 23,919 h EQUIPMENT NC rotary table with C-axis NC swiveling head FD function (free-form machining) Pallet changer Fpodez Hu Siopfx Akysn Infrared measuring probe for workpiece measurement Additional magazine with 120 positions

Condition: excellent (used), Year of construction: 2009, Hwacheon Cutex 160, Year 2009 CNC Control Fanuc OT i 12-station turret LNS bar feeder (max. bar diameter 42 mm) Tool package (including driven tool holders) Chip conveyor Fsdpfx Aoyc Nryekyspn Tailstock Technical data: Swing diameter over bed: 550 mm Max. turning diameter: 300 mm Max. turning length: 300 mm X-axis travel: 170 mm Z-axis travel: 335 mm C-axis Max. bar capacity: 45 mm Spindle speed: 6000 rpm Turret: 12 stations Rapid traverse X: 36 m/min Rapid traverse Z: 36 m/min Drive power: 20 kW Machine weight approx.: 3200 kg

Condition: used, Year of construction: 2006, functionality: fully functional, turning diameter: 1,000 mm, controller model: Siemens 840 D, tool length: 500 mm, number of slots in tool magazine: 44, TECHNICAL DETAILS Working area Swing diameter: 1,000 mm Swinging diameter: 1,000 mm Z-axis travel: 900 mm MACHINE DETAILS Control system: Siemens 840 D Tool holders: SK 50, VDI 60 Fpsdez Hmc Tspfx Akysn Tool magazine: 44 positions Tool weight: max. 35 kg Tool length: max. 500 mm

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X393Z00745, Year of construction: 2009, operating hours: 32,592 h, load capacity: 3,000 kg, lifting height: 5,900 mm, free lift: 1,874 mm, fuel type: gas, mast type: triplex, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 5,900 mm Free lift: 1,874 mm Fpedpfx Aksz I I I Hjyjn Overall height: 2,641 mm Load capacity: 3,000 kg MACHINE DETAILS Mast type: Triplex ISO class: ISO Class 3 = 2,500–4,999 kg Unladen weight: 4,925 kg Operating hours: 32,592 h EQUIPMENT 3rd valve 4th valve Heater Full cabin External reference: SL16126SLO

Condition: used, TECHNICAL DETAILS Fpodpfxeuhauys Akyon - number of spindles : 6 independent - bar clearance : 32 [mm] - maxi spindle speed : 6 300 [rpm] - machine equipped with 28 numerical axes - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : X and Z axes controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : X and Z axes controlled by CNC - slide unity 5.1 : X and Z axes controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - synchronous unit, spindle position 6.1 EQUIPMENT - INDEX C200-4 control (Siemens SINUMERIK 840D) - Simple NCU - IEMCA SIR MS32/33/P bar feeder - Coolant tank: KNOLL AE 1076 * with high-pressure pump - KNOLL VRF 500 chips conveyor - Parts catcher with conveyor in position 6

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 836 h, machine/vehicle number: ME108831, load capacity: 200 kg, fuel type: electric, working height: 10,000 mm, No minimum price – guaranteed sale to the highest bidder! Fodpfxsz I I Iae Akyepn TECHNICAL DETAILS Load capacity: 200 kg Working height: 10,000 mm MACHINE DETAILS Drive type: Electric Weight: 2,735 kg Rated power: 1.2 kW Operating hours: 836 h External reference: SL16147SP