Used tool grinders for sale (178)

Condition: excellent (used), Universal tool grinder Michael Deckel S11 with accessories and tool cabinet in very good condition !!! Technical data: >> Year of construction 1986 >> serial no. 759 Clamping range : >> Clamping area of the tool slide 500 x 180mm >> Max. Tool diameter between the centers 130mm >> Max. Max. tool diameter with flying clamping in the universal dividing head 620mm >> Max. Tool lengths between centers 270mm >> T-slot machine stand 12mm >> T-slot grinding head, tool slide and accessories 8mm Movement range: >> Working paths Sanding stroke 190mm Grinding stroke for swirl grinding 190mm Cross adjustment of tool slide 100mm Vertical adjustment of grinding head 325mm Longitudinal adjustment of grinding spindle 5mm >> Rough adjustment travel Tool carrier 220mm Grinding head support 800mm Universal dividing head on tool slide 330mm >> Swivel angle Grinding head support 360 degrees Grinding head 360 degrees Tool carrier 360 degrees Grinding spindle: Three-phase drive motor 1.1KW at 2800 rpm Spindle speeds, infinitely variable 2000 to 12000 rpm Max. Grinding wheel diameter 125mm Max. Cutting wheel diameter 200mm Dimensions: Weight 520 kg Dimensions ( depth x width x height ) 800 x 1100 x 1760mm Hodpfx Anjqd N S Dodenr Space requirement ( including operation ) 2.5 x 2.3 m Accessories and equipment: 1 tool cabinet with the following contents: >> Universal dividing head SK40 >> Twist and relief grinding device >> SK40 radius grinding device >> Tailstock >> Swivel support finger >> Machine vice >> Sk 40 tool holders >> Measuring holder >> Intermediate bearing >> Setting gauge >> Support finger for radius cutter >> Tooth supports >> Indexing head >> Protective covers >> 1 set of collets as good as new from 1 to 17.5 mm 0.5 mm increasing >> Grinding wheel holders >> various grinding wheels >> dividing wheels >> suction device with vacuum cleaner >> various holders and much more (as shown in the pictures) About the machine : We are offering a Michael Deckel S11 universal tool grinding machine. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches can be ground amazingly quickly, economically and flexibly with maximum ease of use. The Deckel S11 is in very good condition and equipped with many accessories. Mechanically and electrically tested. Take the opportunity to view and try out this machine under power on site.

Condition: excellent (used), Year of construction: 1995, Tool grinding machine Michael Deckel S5 in very good condition Technical data: Hedpspr U Etsfx Andjnr >> year of construction 03/1995 >> grinding wheel diameter max.100mm >> spindle speed 5600 1/min >> power consumption 1,5KW >> weight 450KG Accessories: >> Swiveling dividing head SK40 >> div. mountings SK40 To the machine : Offered is a tool grinding machine of the brand Michael Deckel S5. The machine is suitable for grinding high precision parts. The Deckel S5 is in a very good condition. Mechanically and electrically tested. Take the opportunity to inspect and try this machine on site under power.

Condition: excellent (used), Year of construction: 1992, Universal tool grinder Michael Deckel S11 very good condition !!! Technical data: >> Year of manufacture 1992 >> serial no. 1651 Clamping range : >> Clamping area of the tool slide 500 x 180mm >> Max. tool diameter between centers 130mm >> Max. Max. tool diameter with flying clamping in universal dividing head 620mm >> Max. Tool length between centers 270mm >> T-slots machine stand 12mm >> T-slots grinding head, tool slide and accessories 8mm Range of motion: >> Working paths grinding stroke 190mm grinding stroke during swirl grinding 190mm Hnodpfx Anem E T Ansdor cross adjustment tool slide 100mm vertical adjustment grinding head 325mm longitudinal adjustment grinding spindle 5mm >> Coarse adjustment travel tool carrier 220mm Grinding head carrier 800mm Universal dividing head on tool slide 330mm >> Swivel angle Grinding head carrier 360 degrees Grinding head 360 degrees Tool carrier 360 degrees grinding spindle: Three-phase drive motor 1.1KW at 2800 rpm Spindle speed, stepless 2000 to 10000 rpm Max. Grinding wheel diameter 125mm Max. Cutting disc diameter 200mm Djduu2 Dimensions: Weight 520 Kg Dimensions ( depth x width x height ) 800 x 1100 x 1760mm Space requirement ( including operation ) 2,5 x 2,3 m Accessories and equipment: >> Opto-electronic measuring device with microscope and digital display >> Radius grinding device SK40 >> Handwheel device for tool slide >> Suction device >> Machine lamp To the machine : Offered is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches are ground amazingly fast, economical and flexible and with the highest ease of use. The Deckel S11 is in very good condition. Mechanically and electrically tested. Take the opportunity to inspect and try out this machine on site under power.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Universal tool grinding machine Michael Deckel S11 speed, year of manufacture 2002, in very good condition!! Technical Data: >> Year of manufacture: 2002 >> Serial No.: 2197 Clamping range: >> Clamping surface of tool slide 500 x 180 mm >> Max. tool diameter between centers 130 mm >> Max. tool length between centers 270 mm >> T-slots machine stand 12 mm Movement range: >> Working travel Grinding stroke 190 mm Grinding stroke during thread grinding 190 mm Transversal adjustment tool slide 100 mm Vertical adjustment grinding head 325 mm Longitudinal adjustment grinding spindle 5 mm >> Coarse adjustment travel Tool holder 220 mm Grinding head carrier 800 mm >> Swivel angle Grinding head carrier 360 degrees Grinding head 360 degrees Hodpewrnf Eefx Andjnr Tool holder 360 degrees Grinding spindle: Three-phase drive motor 1.1 KW at 2800 rpm Spindle speeds, stepless 2000 to 12000 rpm Max. grinding wheel diameter 125 mm Max. cutting wheel diameter 200 mm Dimensions: Weight 520 kg Dimensions (D x W x H) 800 x 1100 x 1760 mm Space requirement (including operation) 2.5 x 2.3 m Accessories and equipment: >> See pictures About the machine: Offered is a universal tool grinding machine of the brand Michael Deckel S11 speed. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches can be ground amazingly fast, economically, and flexibly, with the highest operating comfort. The Deckel S11speed is in very good condition. Mechanically and electrically tested. Take the opportunity to visit and test this machine on site under power.

Condition: good (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: FAF19SCULPTOR, grinding spindle motor power: 1,500 W, input current: 4 A, The Schneeberger Sculptor is a Swiss high-precision profile grinding machine, specifically designed for the sharpening and manufacturing of tools. The machine is fully operational and available for testing. It comes with a comprehensive set of accessories and parts. Hnjdpjyk S Rnofx Andor

Condition: excellent (used), Year of construction: 2009, CNC control : FANUC 160i Hsdsr Ha Dvspfx Andsnr - Accessories available. - Fanuc loading robot - Coolant system (Edge 2 tower from ARO-Technologies) - Oil mist separator (ELBARON SA) Travels: X-axis 650 mm Y-axis 300 mm Z-axis 300 mm C-axis swivel angle +150°/ -60° C' axis swivel angle +/- 180° Grinding spindle: Wheel dimensions up to 250 mm Speed 0 - 10,000 rpm. Max. spindle power 26 kW HSK 80 holder Max. Number of disks 6 Workpiece headstock Vmax 180°/s Drive power 1.6 kW ISO 50 mounting Precision (resolution) Resolution linear axes 0.001 mm C-axis 0.001° Dimensions: Length 3100 mm Width 1915 mm height 2190 mm Weight 8'500 kg

Condition: excellent (used), grinding wheel (ØxWxd): 125 x 20 x 20 mm Speed: 2800 rpm longitudinal adjustment: 130 mm cross adjustment: 80 mm height adjustment: 65 mm rake angle: +25° to -10 Dimensions WxDxH: approx. 550 450 450 x 650 mm Hnjdpfx Aofqicxendor Weight: approx. 70 kg

Condition: used, Year of construction: 2003, CNC Tool Grinding Machine Schneeberger NORMA CFG Year of manufacture: 2003 Center height: 210 mm Table length: 950 mm Table width: 310 mm Travel X-axis: 380 mm Travel Y-axis: 280 mm Travel Z-axis: 280 mm Grinding wheel diameter: 50–200 mm A-axis grinding head rotation: 360° C-axis tool rotation: 340° C-axis spindle resolution: 0.001° Tool holder: HSK 50 Grinding spindle speed, stepless: 0–9000 rpm Hydraulic unit: 6 bar Connection: 3×400 V / 50 Hz Spindle power: 7.5 kW Total power requirement: 33 kVA Machine weight: approx. 5,500 kg Machine dimensions Length: 1,930 mm Width: 1,590 mm Height: 2,250 mm Control system: GE Fanuc Series 16-M Accessories: various grinding wheel mounts and tool holders Max. operating current: 3×40 A Hnjdpfx Asxz R T Usndjr No guarantee is given for the accuracy, completeness, or timeliness of the information.

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 7063234, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 550 kg Customs tariff number: 8460.2930 Dimensions: 150/60/120 cm Hnjdpew T Tqnjfx Andor TECHNICAL SPECIFICATIONS Minimum diameter: 0.1 mm Maximum diameter: 12 mm Maximum plunge grinding length: 50 mm Work wheel diameter: 150 mm Work wheel length: 50 mm Regulating wheel diameter: 100 mm Grinding motor: 1.5 kW Work wheel speed: 4,500 rpm Regulating motor: 0.35 kW Regulating wheel speed (variable): 20–150 rpm For diamond dressing: 455 rpm Technical specifications are provided without obligation and subject to errors or omissions.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 6114676, Country of manufacture: Switzerland Voltage: 380 / 50 / 3 Net weight: 180 kg Dimensions: 850/620/1600 mm Installed power: 0.7 kVA Customs tariff code: 8460.3930 TECHNICAL CHARACTERISTICS DOUBLE CUP PRE-GRINDING AND SUPER-FINISHING WHEEL (FOR HARD METAL) - Abrasive: diamond - Diameter: 175 mm - Bore: 20 mm Spindle speed: 2500 rpm Cutting speed: 23 m/sec Spindle bearing: precision plain bearing Micrometric infeed of the workpiece by means of a fine-pitch threaded spindle, division: 0.01 mm Adjustment of approach and clearance angle: max 26° Hnedpfx Answ T S Tbsdjr TOOL HOLDER CLAMPING CAPACITY: - Prism-shaped tool bodies: max 40x40 mm - Cylindrical tool bodies: max 16 mm - Circular cutting tools: max 85 mm MOTOR POWER: - Drive motor: 0.55 kVA - Pump motor: 0.1 kVA Coolant tank capacity: 10 l. All technical specifications are provided without obligation and subject to error or omission.

Condition: ready for operation (used), Year of construction: 1986, operating hours: 1,200 h, functionality: fully functional, total height: 1,520 mm, total length: 2,580 mm, total width: 1,440 mm, workpiece weight (max.): 200 kg, spindle speed (max.): 2,600 rpm, spindle speed (min.): 1,500 rpm, feed length X-axis: 2,120 mm, feed length Y-axis: 250 mm, feed length Z-axis: 150 mm, type of input current: AC, grinding wheel diameter: 250 mm, overall weight: 3,730 kg, grinding length: 280 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 2,600 rpm, center height in crank: 115 mm, center height: 115 mm, collet bore: 55 mm, grinding spindle speed: 2,600 rpm, feed rate X-axis: 12 m/min, pivoting range: 45 °, travel distance X-axis: 2,120 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 150 mm, center width: 280 mm, grinding spindle motor power: 3,000 W, table length: 2,800 mm, table width: 250 mm, power: 6.5 kW (8.84 HP), height adjustment type: mechanical, workpiece diameter (max.): 235 mm, grinding diameter: 250 mm, input frequency: 50 Hz, disc diameter: 250 mm, input voltage: 380 V, space requirement width: 1,440 mm, space requirement length: 2,580 mm, space requirement height: 1,520 mm, grinding wheel speed: 2,100 rpm, distance table to spindle center: 362 mm, tool diameter: 235 mm, workpiece length between centers: 280 mm, distance between centers: 280 mm, Hob Sharpening Machine 33C (ZZS) 3A662 (Gear hobbing cutter grinding machine) The 33C (ZZS) model 3A662 is a specialized hob sharpening machine designed for precise sharpening and regrinding of gear hobs and gear cutting tools. Manufactured by 33C (Soviet Union), this machine is intended for industrial tool rooms and gear manufacturing facilities requiring reliable accuracy and repeatable grinding quality. The machine is suitable for sharpening hobs with a maximum diameter of 235 mm and a maximum length of 280 mm. It supports hobs with 4 to 30 flutes and allows grinding of straight and helical flutes with a helix angle range from 0° to 45°, covering a wide range of gear cutting applications. Hedpfxjx Nprbs Andjnr The grinding spindle is designed for grinding wheels with diameters from 200 to 250 mm. Spindle speed is adjusted via step pulleys and offers four speed stages: 1500 / 1900 / 2100 / 2600 rpm, ensuring flexibility for different tool sizes and materials. The machine is equipped with a dividing mechanism and supplied with a complete set of change gears, allowing accurate indexing during the sharpening process. A hydraulically driven table provides smooth longitudinal movement and stable grinding conditions. With overall dimensions of approximately 2580 × 1440 × 1520 mm and a machine weight of about 3730 kg, the 3A662 features a rigid and robust construction, providing excellent vibration damping and long-term operational stability. The machine operates on three-phase AC power (380 V / 50 Hz) and is supplied with original factory documentation. Key Features: *Specialized hob sharpening machine *Max. hob diameter: 235 mm *Max. hob length: 280 mm *Number of flutes: 4 – 30 *Helix angle range: 0° – 45° *Grinding wheel diameter: 200 – 250 mm *Grinding spindle speeds: 1500 / 1900 / 2100 / 2600 rpm *Hydraulically driven table *Dividing mechanism with full set of change gears *Rigid industrial construction (approx. 3730 kg) *Original technical passport and manual (Russian) Typical Applications: *Sharpening and regrinding of gear hobs *Maintenance of gear cutting tools *Tool room operations in gear manufacturing *Repair and refurbishment of worn hobs *Small- and medium-series gear production support

Condition: used, Year of construction: 1954, functionality: fully functional, machine/vehicle number: 541000, total height: 1,700 mm, total length: 1,200 mm, total width: 1,200 mm, overall weight: 815 kg, table length: 700 mm, table width: 70 mm, disc diameter: 150 mm, - Year of manufacture: 1954 - Fully functional, powered, ready for demonstration - Grinding wheels Ø150 mm - Cross travel: 300 mm Hnedpfx Ajxnimtjndjr - Longitudinal travel: 450 mm - Table size: 700 x 70 mm / tiltable - Grinding spindle tiltable in Z, X, Y axes - Machine dimensions: 1700 x 1200 x 1200 mm - Weight: 815 kg - Factory No.: 541000 Accessories: - Swiveling dividing head - Swiveling vice - 2x dressing diamonds - Grinding wheel holders - Approx. 15 diamond/CBN grinding wheels - Various grinding wheels - Collets Ø1 – Ø20 mm

Condition: like new (used), Year of construction: 2020, operating hours: 4,000 h, functionality: fully functional, EQUIPMENT - ELBARON grinding mist extraction Hnjdpfxjxam Ths Andsr - Collets for all common diameters up to 20 mm - Complete description and installation manual - Original spare spindle available upon request

Condition: used, used Michael Deckel S11 - fully functional Hsdpfx Ansx Hyn Isdonr

Year of construction: 1984, condition: used, Large grinding wheel diameter: 40 mm Small grinding wheel diameter: 5 mm Weight: 0.9 t 2 grinding wheels with flange 8 collets 1 coolant tank Mechanical feed with fixed stop Hodpfxjcq Rv Uo Andjnr The universal joint for the workpiece drive is worn.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, total height: 245 mm, total length: 211 mm, total width: 212 mm, spindle speed (max.): 5,000 rpm, feed length X-axis: 650 mm, feed length Y-axis: 350 mm, feed length Z-axis: 720 mm, grinding wheel diameter: 250 mm, overall weight: 5,000 kg, Machine has only run with oil cooling, machine is equipped with dressing roller, measuring probe, pneumatic workpiece clamping, -- New linear guides and control conversion in 2014 Hedpfx Aneug H R Sodjnr

Condition: good (used), Year of construction: 1987, functionality: fully functional, 1 x optical profile sanding machine Doebelie OP 125 X year of construction:1987 with dust extractor Esta Hnodpfxjqu Rh Ne Andor KK 5 S in good condition. The machine can be inspected under power.

Condition: good (used), Year of construction: 1990, 1 x tool grinding machine Doebelie D 175 combination grinding Year of manufacture: 1990 with coolant system. Hedpfx Anexza Nxedsnr + machine lamp The machine can be inspected under power.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 605, rotational speed (max.): 3,000 rpm, grinding diameter: 12 mm, controller model: Robot CNC, workpiece height (max.): 100 mm, table diameter: 200 mm, TECHNICAL DETAILS Grinding capacity (diameter): Ø 0.025 – 12.7 mm Bar diameter: Ø 1.0 – 12.7 mm Grinding length: W15 (optionally W20) Number of wheels: 1 Table diameter: 200 mm Workpiece height: 100 mm Control system: Robot CNC Axes: 4 axes + 2 programmable robot axes Z-axis: 35 mm, resolution: 0.5 µm X-axis: 25 mm, resolution: 0.1 µm Y-axis: 286 mm, resolution: 0.5 µm U-axis: 15 mm, resolution: 0.1 µm Hodpfx Anexnzd Dsdonr Interpolation: Simultaneous linear interpolation of 4 axes, cylindrical interpolation of 2 robot axes Head Motor Power: 0.70 kW Speed: 300 – 3,000 rpm Rough Grinding Power: 1.5 kW Spindle diameter: Ø 60 mm Grinding wheel diameter: Ø 200 mm Cutting speed: 30 m/s Finishing Power: 0.75 kW Spindle diameter: Ø 100 mm Grinding wheel diameter: Ø 150 mm Cutting speed: adjustable MACHINE DETAILS Total power requirement: 6 kW Machine weight: approx. 1.8 t Space requirements (L x W x H): approx. 1.83 x 2.04 x 2.1 m EQUIPMENT - Robot for loading and unloading - Fire protection system

Year of construction: 2023, condition: new, ATTENTION: No machine is sold, only GRINDING WHEELS for these machine types: SCHNEEBERGER LEPUS, SCHNEEBERGER WSL and LAMELLO Lepus. Image 1 + 2 Pictures 3 - 5 are sample pictures for these machines dry & wet chisels u. Hand planer knife grinding machines Price per piece: Grinding wheel COARSE orange: EUR 75.- excl. VAT. & Shipment CHF 75.- excl. VAT. & Shipment Grinding wheel FEIN white: EUR 115.- excl. VAT. & Shipment CHF 115.- excl. VAT. & Shipment Z.K .: Minimum purchase quantity 2 pieces per order. Hjdjfvzmyjpfx Andonr Your direct contact: Marc Brönnimann We sell grinding wheels for the following chisels and hand planer knives / sharpening machines: LEPUS, SCHNEEBERGER, LAMELLO, WSL, can be used wet & dry!

Condition: good (used), Year of construction: 1992, Schütte WU 405, CNC(NUM) controled tool grinding machine with five axles. Fully functioning and partly revised. Serveral working grinding programms. Electrostatic filter is included. X-axle 540 mm Y-axle 280 mm Z-axle 260 mm W-axle 355° pivotable A-axle Engine capacity 4.6 Kw The Machine is not used for over three years after a fire, the damage is fully repaired and the machine is completely functional. It is possible to see it working under airpressure and electricity. Availabel programs on the machine: Ballnose cutters Conical cutters Hnjdpfx Aefxz A Asnder Cylindrical cutters Shell end mill Drills (10 different type of noses) Tap Step tools

Condition: ready for operation (used), Year of construction: 1978, operating hours: 300 h, functionality: fully functional, machine/vehicle number: UWII/2567/78, Tool grinding machine Hnjdpsv Hcblefx Ander Motorized height adjustment has been repaired Spare parts supply secured by repair shop >Grinding table 835 x 145 mm< Longitudinal travel by hand 500 mm Pivotability 90 degrees >Grinding head< Transverse movement 220 mm Height adjustment 250 mm Pivotability horizontally and vertically - 360 degrees Extension of the working range via eccentric plate Grinding spindle D60x240 mm Speeds - 2 belt speeds 3300/5400 rpm Weight approx. 700 kg Space requirement 1800 x 1300 x 1600 mm The machine is functional; all movements can be controlled by handwheel.

Condition: good (used), functionality: fully functional, machine/vehicle number: S11-016, We are selling our Deckel S11. The machine is operational, and a digital readout can optionally be purchased as well. Hnodpfx Anew A Rrvedjr

Condition: good (used), Year of construction: 1981, functionality: fully functional, We are selling our Walter UWS 20 AY. Hnodpew A Rtyjfx Ander

Condition: used, Year of construction: 1972, functionality: fully functional, machine/vehicle number: 1307-62, total height: 1,600 mm, total length: 1,360 mm, total width: 610 mm, grinding wheel diameter: 175 mm, overall weight: 670 kg, grinding length: 500 mm, grinding spindle speed: 4,350 rpm, travel distance X-axis: 500 mm, travel distance Y-axis: 225 mm, travel distance Z-axis: 230 mm, grinding spindle motor power: 550 W, table length: 800 mm, table width: 165 mm, power: 0.55 kW (0.75 HP), disc diameter: 175 mm, Semi-automatic tool grinding machine with infinitely variable table drive. Machine inspected, grinding motor newly fitted with bearings. Grinding spindle of newer design without disturbing noises (repairable). Bellows in good condition, cross bellow new. Clamping surface undamaged. Electrical system inspected. For further details, see operating manual. Hjdpfx Aneytq Abjdenr