Used thickness planer for sale (201)

Condition: used, Thickness planer SAC 530 Max. planing width: 530 mm Ibedpfoyt Hpwox Ahyjc Max. planing height: 300 mm 4 classic knives clamped with wedges Electric height adjustment Feed speed adjustable via inverter from 4 to 16 m/min Segmented metal infeed roller 2 outfeed rollers after the planing shaft Digital height display 5.5 kW motor Quiet operation, works smoothly and efficiently

Condition: excellent (used), SCM S52 thickness planer Max. planing width: 520 mm, Max. planing height: 240 mm, 4 classic knives (wedge-type), electric lifting + manual lifting, feed speed infinitely adjustable, metal infeed roller, 2 rollers in the table, adjustable, Ijdpfx Aheza Dg Hjyebc digital height display, 160mm dust extraction port, 5.5KW motor, quiet operation, machine in good condition.

Condition: excellent (used), Catalog number: 7695 TECHNICAL DATA - Shaft width: 640mm - Number of knives: 4 - Max. thickness of the workpiece: 200mm *From above: - Ratchets - Toothed, sequential (divided, segmented) feed shaft - Pressure rollers - Planing shaft - Pressure rollers - Smooth feed-out shaft *From below: - Smooth sliding shaft (at the inlet) - Smooth feed shaft (at the outlet) Iodpfx Ahezu Saceysbc - Adjustable rollers in the lower bed - Electric bed lifting - Main motor: 7.5kW - Infinitely variable feed speed adjustment: 8-24m/min - Diameter of the dust extraction nozzle: 180mm - Dimensions (L/W/H): 1400x1100x1650mm - Weight: 1650kg Net price: 17900 PLN Net price: 4163 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to currency fluctuations)

Condition: used, Year of construction: 2026, New exhibition machine! General technical features: Planing width: max. 630 mm Planing height: 2.8 - 300 mm Maximum planing removal: 12 mm Workpiece length min.: 270 mm Weight: approx. 1,200 - 1,400 kg Table length: 1,260 mm Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; buttons for manual quick and fine adjustment of the planing thickness according to digital display, push buttons for starting and stopping the cutterhead, integrated operating hour counter - Cutterhead: Tersa full steel cutterhead with Z 4 - Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles for tilt stability, table surface finely planed - Feed: 2 speeds 6 / 12 m/min - Extraction: Hinged, split hood with chip extraction connection Ø 160 mm, can be connected on the left / right (in special cases on both sides); minimum extraction air volume: 24 m³/min at 20 m/s, negative pressure 1,050 Pa Planing width: split hood with chip extraction connection - Maintenance device: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease fittings Accessories: 1 grease gun, filled with long-life grease 1 oil can 1 adjustable wrench 1 tool for cutter replacement 1 pair of blank cutters 640 mm 2 pairs of TERSA reversible cutters 640 mm CV - Electrical equipment: Electronic soft start/brake device; contact for controlling the extraction; motor circuit breaker and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (infeed / outfeed); required voltage supply: 3 ~, 400 V - 50Hz - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idling noise (without extraction) P1 65 Working noise (with extraction) P1 77 Idling noise (without extraction) P2 65 Working noise (with extraction) P2 77 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idling noise (without extraction) 84 Working noise (with extraction) 90 - Dust emission DGUV test "tested for wood dust" according to DGUV 209-044 / BGI 739-1 Special equipment: -Drive power 7.5 kW (10 hp) -2nd rubber feed roller, ø 85 mm, complete -Thickness table extension, foldable, 630 x 450 mm -Special speed 6,000 rpm Location: Rieth Ijdpfxez A Hhus Ahysbc

Condition: excellent (used), CATALOGUE NUMBER 8063 Technical data: - roller width 640mm - number of knives 4 pcs - max. thickness of workpiece 300mm – from top to bottom: - pawls - toothed, pulling, twisting infeed roller - pressure roller - planing roller - pressure roller - smooth, pulling, rubber outfeed roller - digital thickness display - motor 7.5kW - electric brake - electric table lifting - 4 types of rotational speeds 5000/8000/12000/19000m/min - diameter of dust extraction nozzle 160mm - dimensions L/W/H 1400x1100x1250mm - weight 955kg Ibodpfjzrwdnex Ahyec Advantages: - made in Italy - electric thickness display - electric table lifting - unpainted - used thicknesser, very good condition, original DTR documentation Net price: 32900 PLN Net price: 7651 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: excellent (used), working width 530mm working height 300mm 4-knives shaft electric table regulation Ibjdpfx Asy N N I Nohyjc electronic display of table position main motor power 4kW feeding speed 5/8/12/19 m/min year 2002

Condition: used, Technical specifications: Max. planing width: 500 mm Max. planing height: 250 mm Cutterhead diameter: 110 mm Number of knives: 3 2 feed speeds Manual lifting Power supply: 380 V Motor power: 4 kW Overall dimensions: Length: 1000 mm Width: 1100 mm Height: 1400 mm Iedpfxozd Evvo Ahysbc

Condition: used, Thickness planer, planer 5/26 Iedezkh D Nepfx Ahyjbc

Condition: good (used), Year of construction: 1974, KAMRO thickness planer machine Model CONCORD DH5 Year of manufacture 1974 Ijdpfowlfibsx Ahysbc Motor 5.5 HP / 400 Volt 4-knife shaft (strip knives) Planing width 510 mm Planing height approx. 250 mm Feed speed 9 and 18 m/min. 2 table rollers Knife setting gauge Operating manual

Condition: used, Year of construction: 1998, machine/vehicle number: 531007, functionality: fully functional, SECOND-HAND THICKNESSER PLANER CMC MOD. SP530 - CE RULES - S/N 531007 Ibsdpfex Rqmcjx Ahyec - Year 1998

Condition: excellent (used), Thickness planer SCM S520 Max. planing width: 520 mm, Ibsdpfx Ahey N Uc Eeyjc Max. planing height: 250 mm, 4 classic knives (so-called wedge type), electric height adjustment, 4 feed speeds, 2 adjustable table rollers, electronic height readout, Extraction port: 150 mm, Motor: 5.5 kW, quiet operation, machine in very good condition.

Condition: used, Year of construction: 1998, functionality: fully functional, SECOND-HAND THICKNESSER PLANER GRIGGIO PSA 520 - CE RULES Ijdpfx Aex Ridmehyebc - Year 1998

Condition: as good as new (ex-display), Code: N0485 Brand: FELDER - AUSTRIA Model: D 951 - CE Standard Isdjzqdz Ropfx Ahyjbc Automatic thickness planer – CE Standard Technical data: Shaft with 4 Tersa replaceable blades Diameter 120 mm Working width 504 mm Working height 3/254 mm Table length 900 mm Max chip removal 8 mm Automatic table lift Electronic depth display Variable feed speed from 4 to 16 metres/min N° 2 rollers on the table Motor power Hp 10YT Dust extraction connection diameter 140 mm Overall dimensions mm 1050 x 1050 x 1100 h Weight kg 650

Condition: excellent (used), Planing width 520 mm Min./Max. working height 3 – 240 mm Motor power 5.5 kW, 400 V, 50 Hz Speed of planing shaft 4500 rpm Diameter of planing shaft 120 mm Planing knives 4 pcs Dimensions of thickness table 520 x 850 mm Feed rate 6.5 / 10 / 13 / 17 m/min Dust extraction diameter 150 mm Electric height adjustment Handwheel for fine adjustment of thickness table height Spiral-toothed steel feed roller Ibodpsy Egmuefx Ahyec Segmented pressure bar 2 steel extraction rollers Table roller Low voltage release Emergency stop switch Knife setting gauge Test report for conformity with Section 4 of the AM-VO NEW V-belts NEW BALL BEARINGS NEW PLANING KNIVES Dimensions approx. L x W x H = 1120 x 990 x 1000 mm Weight approx. 600 kg Note on used machines: • Subject to errors in technical specifications and prior sale. • Prices quoted are ex-works, pick-up only – free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at our location. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address and telephone number!)

Condition: used, Year of construction: 1992, with Centrofix - cutterhead variable feed speed 2 x outfeed rollers Cleaned, lubricated, partially overhauled Ibsdexuv N Ijpfx Ahysc Fully set up, test planed, New parts: digital display, distance rings, infeed mat, connection box Used, good condition, top features Manufacturer: Maka Model: DH 630 A Year of construction: 1992 Machine no.: 9201891 GS-certified for wood dust Motor: 6.7 kW Planing width: approx. 630 mm Planing height: approx. 300 mm Table roller: 1 pc, adjustable Segmented pressure beam Segmented infeed roller 2 steel outfeed rollers Feed rate: 0-21 m/min, stepless Number of knives: 4 Knife system: Centro-Fix reversible knives Digital height display Electrical height adjustment with handwheel for fine-tuning Extraction port D 150 mm Space required: approx. 1200 x 1200 x 1400 mm Weight: approx. 1000 kg Location: 97447 Gerolzhofen, ex stock, unpacked Transfer as is, as inspected, without warranty or guarantee

Condition: excellent (used), functionality: fully functional, thickness planer SCM S 63 + surface planer SCM F52 + spindle moulder SCM T160 Isdpfx Asvamvyshysbc second hand machines in Excellent working conditions NOT separate sale thickness planer model SCM S 63 L'Invincibile useful working width mm. 630 maximum (minimum) working height mm. 240 (3) maximum removal mm. 8 variable feed speed mt./min. 6 ÷ 18 motorized table positioning with reading n.4 knives "Tersa" main motor power Hp 7,5 volt. 380/50 spindle moulder with tilting spindle model SCM T160 L’Invincibile spindle tilting by electric -5 ° / + 45 ° spindle lifting by electric motor power Hp 5,5 shaft diameter mm. 50 volt. 380/50 net weigth kgs. 1000 surface planer model SCM F 52 L'Invincibile working width mm. 520 tables length mm. 3000 ground cast iron tops n.4 knives tilting guide up to 45° motor power Hp 5,5 volt. 380/50

Condition: excellent (used), working width 520mm 4-knives shaft delta/star start mechanical table regulation variable regulated feeder shaft speed 4500 RPM Ijdpfjy N N I Asx Ahyebc roll in the table

Condition: used, SAC RS/530 Thicknesser width mm. 530 Ibsdeyzfvgspfx Ahyjc

Condition: reconditioned (used), Year of construction: 1981, machine/vehicle number: 116680, functionality: fully functional, Rated power: 380 V, 11 A Planing width: 630 mm Planing height: 250 mm Feed rate: 8-20 m/min Dust extraction port: 160 mm Weight: approx. 870 kg Rubber-coated infeed and outfeed rollers Iodpfeh U A Evsx Ahyjbc Two-knife cutterhead with strip planing knives Central lubrication Planing height adjustable via handwheel Star-delta switch

Condition: used, Year of construction: 1990, with Tersa cutter shaft Machine in working order completely set up used good condition cleaned functionality tested partially refurbished Manufacturer: Martin Type: T43 Year of manufacture: 1990 Machine no.: V 177666 GS-tested GS-tested for wood dust Iodjzg Nl Tjpfx Ahyobc Segmented pressure beam Rubber feed roller Rubber extraction roller Feed rate m/min: 6 9 12 18 m/min Number of cutters: 4 automatic motor brake Tersa reversible cutters Digital display for planing height electric height adjustment with tip fine adjustment Motor kW: 5.5 Planing width approx. mm: 630 Planing height approx. mm: 250 Dust extraction connection mm: 160 Space requirement approx. L x W x H mm: 1200x1250x1200 mm Weight approx. kg: 1000 Location: 97447 Gerolzhofen, free loading, unpacked Handover in current condition as inspected, without warranty

Condition: good (used), Code: 0299 Brand: SCM Model: S 630/E - CE Standard Iodpfx Aeyi E T Tehyobc Automatic thickness planer for carpentry workshops, custom furniture, wooden window frames, wooden carpentry, sawmills, plastics, composite materials, and various - CE Standard Technical data: Electronic table positioning Pneumatic roller pressure adjustment Drive system with 3 large-diameter motorized upper rollers - Easily interchangeable Electronic feed speed variator 4/20 mt/min Work table dimensions 630 x 1000 mm Max working width 630 mm Min/max working height 3/300 mm Min working length 260 mm N° 4 knives Motor Hp 7,5 Feed motor Hp 2 Suction mouth diameter 150 mm Overall dimensions mm 1360 x 1080 x 1220 h Weight kg 1000

Condition: good (used), functionality: fully functional, power: 5.5 kW (7.48 HP), Table milling machine KAMRO, spindle D=30mm, Ibsdpfoyxwwkjx Ahyjc

Condition: used, Year of construction: 1994, Used, good condition, top equipment, low operating hours. Equipped with 2 rubber outfeed rollers, segmented infeed roller, electric adjustment. Machine cleaned and lubricated. Planer knives replaced. Test planing completed. Machine is complete with all settings. Manufacturer: Hofmann Model: DH 510-2 Year of manufacture: 1994 Machine no.: 51/2-490-3452 GS wood dust tested Motor: 4 kW Planing width: approx. 510 mm Planing height: approx. 260 mm Ijdeythclepfx Ahyjbc Segmented pressure bar Segmented infeed roller 2 rubber outfeed rollers Feed rate: 7/14 m/min Number of knives: 2 Knife system: strip planer knives Brück reversible knives Digital height display for planing height Electric height adjustment with handwheel fine adjustment Extraction connection: D 160 mm Space requirement approx. 1000 x 1000 x 1500 mm Weight: approx. 800 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in current condition as inspected, without warranty or guarantee.

Condition: used, top machine with adjustable feed roller suspension infinitely variable feed electric height adjustment used, top equipment make Brugg type HDA-85 machine no. 8527 planing width approx. 850 mm planing height approx. 250 mm Isdpfx Ahsvwghqjyjbc table sliding rollers 2 adjustable articulated pressure beam feed approx. 6-24 m/min. number of knives 4 knife system strip planing knife digital display for planing height analogue electric height adjustment with handwheel fine adjustment extraction connection D 180 mm space requirement approx. 1500 mm x 1400 mm x 1900 mm weight approx. 2000 kg storage location 97447 Gerolzhofen, free loading, unpacked handed over in the current condition as seen, without guarantee and warranty

Condition: used, Technical data: Max planing width: 630 mm Max planing height: 250 mm Ijdpfx Aslp N Tyjhyjbc Knife shaft diameter: 120 mm Number of knives: 4 1 roll in the countertop Feed speed: 6-18m/min Electric lifting Power: 400V Motor power: 5.5 kW Overall dimensions: Length: 1300mm Width: 980mm Height: 1120mm