Condition: refurbished (used), Year of construction: 2001, Balz Debarking Machine BG 90 6W-GR Year of manufacture: 2001 Ijdjy Iabdspfx Aqusau Completely overhauled in 2022 and not reassembled afterwards Minimum diameter: 14 cm Maximum diameter: 90 cm With conveyor systems for infeed and outfeed Immediately available – Fully overhauled Location: Austria, near Linz

Condition: used, Year of construction: 1999, functionality: fully functional, feed rate X-axis: 75 m/min, Min. log diameter: 11 cm Max. log diameter: 75 cm Iasdpfx Aqew Emhfjuju Feed speed: 75 m/min Rotor speed: 222 rpm Rotor motor: 75 kW Feed motor: 2.2 kW Hydraulic unit: 1.5 kW Infeed (to conveyor) and outfeed (wheel set) are included. In 2021, the rotor was completely replaced with a factory-overhauled rotor (invoice available). Control cabinets are not included! Year of manufacture is estimated to be the late 1990s. Videos of the machine can be sent.

Year of construction: 1994, condition: good (used), Baljer Zembrod root reducer Iaodpfxen Skz Ts Aqusu with radio remote control

Condition: excellent (used), Year of construction: 2016, We offer this very good WRAVOR WRC 1150 AC complete sawmill (stationary), year of construction 2016. Manufacturer: WRAVOR Model: WRC 1150 AC Year of construction: 2016 Iasdpfx Ajy Hx I Tjquju Condition: very good Category ID: 1389 Type ID: 415 Type: complete sawmill (stationary) If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, No. 3264 Complete sawmill Möhringer / Paul Used, still connected to power until 30.06.26 Consisting of: - Log crosscut table with driven tapered rollers Length measurement Hecht with remote-controlled photoelectric sensors - 1 cross conveyor to the frame saw, 7000 x 5500 mm LW Cam chains in mint condition - 1 cross conveyor, 3800 x 4000 mm LW - 1 roller conveyor in front of the frame saw, length 12400 mm, roller width 1400 mm With hydraulic lowering and lifting for sawn timber, cross-discharge with 2 flap gates - Quick-clamping frame carriage EWD with auxiliary carriage - 1 auxiliary conveyor for log feeding in front of the frame - Root reducer Möhringer - Frame saw Möhringer B 75-55 Multi-BV, year of construction 1994 Passage 700 mm, stroke 550 mm, saw blades hydraulically adjustable, conveyor belt, log loading device with adjustable laser, round timber measurement Hecht, clamps Jansen, hooks, 60 saw blades, adjustment gauge - Powered splitting wedge with chain bed Möhringer 230-292, year of construction 1994 With pre-cutting, photoelectric sensors, and laser for adjustment - 1 roller conveyor 4000 x 1400 mm LW, with grooved rollers, cross-feed with pneumatic cylinders - 1 S-conveyor with storage 3500 x 4000 mm LW, flights Albert made of square tube - 1 S-conveyor 3000 x 5500 mm LW, motor with adjustable slip clutch, function monitoring, drive elements made of angle iron - 1 under-table cross-cut saw Paul 15 AO, year of construction 1992 - 1 double edger Paul KME 2 / 750 R, year of construction 1988 With splinter separator, right-hand side unit electrically adjustable, through-feed cross-cut unit, length sorting system, preselection programs Österle - 1 conveyor belt 7400 x 400 mm LW - 1 conveyor belt 4000 x 400 mm LW - 1 conveyor belt 3000 x 500 mm LW - 1 trough conveyor approx. 6500 x 500 mm LW, ascending, for sawdust - 1 trough conveyor HOLTEC approx. 6500 x 500 mm LW, ascending, for wood chips - 1 trough conveyor HOLTEC, horizontal, with left and right rotation as a distributor over the boxes Ijdpfx Asyzr Tfequoau - Drum chipper HAAS, feed width 600 mm, feed height 150 mm, with vibrating chute - Frame saw sharpening machine OPL - Saw blade tooth setting machine VOLLMER GSA, year of construction 1996 - Frame saw sharpening machine VOLLMER (needs minor repairs, push cylinder bent) Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Year of construction: 2018, condition: ready for operation (used), travel distance X-axis: 3,700 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 120 mm, total width: 4,600 mm, total height: 2,500 mm, spindle motor power: 10,000 W, product length (max.): 13,500 mm, spindle speed (max.): 24,000 rpm, number of axes: 5, This 5-axis HOLZHER Dynestic 7535 was manufactured in 2018. It features a working area of 3700 x 2100 x 120 mm and a powerful 10 kW spindle with a speed of 24,000 rpm. The machine includes an 18-position tool changer and a complete CNC nesting solution for high-performance cutting and drilling capabilities. If you are looking to get high-quality woodworking capabilities, consider the HOLZHER Dynestic 7535 wood mill we have for sale. Contact us for further details. • Control: Beckhoff TwinCAT 2 (PC-based) • Software: WorkCentre, NC-Hops, Cabinet Control, CAMPUS v7 • Tool holder: HSK-F63 • Tool changer: 18 positions (gantry-mounted) • Drilling unit: 10 vertical, 3 horizontal (4 X, 2 Y) • Saw unit: Groove saw integrated in X direction • Table type: Matrix table (gantry construction) • Automatic tool measurement: up to Ø20 mm • Power: 22 kW • CE marked • Key features: Complete CNC nesting solution; high-performance cutting and drilling; advanced control with DXF compatibility; auto lubrication and cooling system; offline programming capability included • Additional services available upon request: • Mechanical and electrical decommissioning, as well as installation support Iajdoyzp H Nspfx Aqusu • Basic application training (HOPS), depending on the operator’s experience • After-sales service, including warranty and potential service interventions handled by the seller (T&Cs apply)Please feel free to ask us for detailed pricing regarding these additional services. Additional equipment • Vacuum system: Becker, 250 m³/h • Air cushion table for easy material handling • Zoned safety mats for safe loading during operation • Additional saw blade holder (up to Ø350 mm)

Condition: excellent (used), Year of construction: 2010, The following components of a Linck VM50 saw line are available: Condition of the machines is very good! Iaodpfx Aey Hbxhoquju Infeed device ZV21, model EV 50 (in stock) Profiling chipper ZD31, model VM50, 2 × 200 kW (in stock) Outfeed device AV31, model VZM (in stock) Centering device VZ21, model VZV (in stock) Log rotator DV21, model DV70-2 (in stock) Additional components: Infeed and centering device EVP – available from September 2026 Profiling chipper VM50, 2 × 200 kW – available from September 2026 Profiling aggregate VMP450 F61, 4 × 110 kW – available from September 2026

Year of construction: 1992, condition: good (used), Machining for cut-off band saw in concentricity Iaodpfsfd Ibvox Aquou

Condition: ready for operation (used), Year of construction: 2013, For sale is a Baljer Zembrod OBX V-24 with up to 200m of rail. Iaedpfxswxndnj Aquju

Condition: used, We offer this used ARI Ds-73+1 Ari ds-73 ks-12. Söderhamn / Ake, year of manufacture unknown. If you have any questions or need more information, feel free to send us a message or call us. Iasdpfey Er T Hsx Aquju

Year of construction: 2014, condition: refurbished (used), functionality: fully functional, UHM120_H_T TANDEM BAND SAW Diameter of Wheels Ø 1200 mm Width of Wheels 140 mm Max. Cutting Height 1090 mm Max. Cutting Width 620 mm Upper Wheel Tilting 2×0.37 kW Movement of the Tandem 0.75 kW Hydraulic Unit Motor 2.2 kW Main Motor 2×45 kW - 1450 rpm Weight without Motor ~9000 kg - Capability to saw two timbers in one pass by tandem lined two band saws - Timber thickness is adjusted by two axes control system on band saw and log carriage system UTA_Z4 HYDRAULIC LOG CARRIAGE Max opening of headblocks :1000 mm Max opening of hooks : 1070 mm Forwarding speed :160 m/min Speed of headblocks :320 mm/sec Hydraulic unit of forwarding :22 kW Headblocks : 4 pcs Width of rails : 1220 mm - Fixed fence-horizontol movable hooks. The distance between fence and hooks can be adjusted to desired position min: 35 mm- max: 145 m - Independent horizontal move hooks, log is able to be easily aligned according to to cut axis while clamped and is able to be adjusted to a fix distance of the hook and the fence -min:15mm - max:145mm - Two sets of joysticks with six buttons each to control head blocks, hooks and turning arms and 1 set of hydraulic pedal for carriage forward backward movement Iodju Rmqiepfx Aquoau Conveyors 1. 14 mt longitudinal log conveyor 2. 6 mt Trasnversal Log Decking 3. 7 mt Longitudinal Timber Conveyor

Condition: used, total length: 12,500 mm, total width: 1,480 mm, No. 3263 Impregnation system DEILMANN Used Impregnation tank / impregnation tub for impregnating timber / lumber or wood components Hydraulic immersion and lifting mechanism with hold-down device Length of the tank 12500 mm Width of the tank 1480 mm Height of the tank 1500 mm Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Iodpfx Aqjyy R Hneuoau Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Impregnation tank Iaedpfxoy D Hkkj Aquou Designed for packages: Height: 1.2 m Width: 1.2 m Length: 6 m Capacity: 2 packages

Condition: good (used), functionality: fully functional, High-Performance Frame Saw / HIGH SPEED FRAME SAW EWD HDN 600 TECHNICAL DATA: Ijdey D Hitjpfx Aqueau Well-maintained high-performance full frame saw Frame clearance: 710 x 735 mm Stroke: 600 mm Speed: 310 rpm Fully hydraulic with automatic overhang adjustment Hydraulic saw tensioner and blade suspension Drive motor and gear unit Electrical control cabinet with control system Splitter wedge type AVER, hydraulically driven In very good condition (optionally COMPLETELY REFURBISHED!) Top condition with remote-controlled tensioning carriage

Condition: ready for operation (used), Packing and stacking machine for sawn wood. Iasdpfxek T Aqwo Aqusu

Condition: new, Year of construction: 2024, WRAVOR Horizontal bandsaws WRC 1050,1150,1225,1250,1550,2000 Iajdstpwgxspfx Aqueu edgers, multirip saws, mechanization etc. We are your contact for the company Wravor in Germany. We are happy to offer you the right machines.

Condition: like new (used), Log circular saw, for diameter until 1100mm Iaedpfxei Ek Hpe Aquju

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 03013, BERCAR plank cutter, maximum cutting length 1100mm, maximum cutting height 170mm. 10 hp engine. Iajdpovvpb Refx Aqueu

Condition: excellent (used), The 21-blade trimmer saw very little use. Iasdpfxjy Drnbo Aqusu

Condition: good (used), Jartek with 38 pockets, trimmer for 21 saws, Finnscan, servo support Iasdpfxoy Dqdnj Aquju

Year of construction: 2003, condition: good (used), Sorting line with 11 pockets Ijdsxuh Sbjpfx Aqueau

Condition: excellent (used), HewSaw SRC200/250 complete machine set Iaedey Dpxqopfx Aqueu

Condition: ready for operation (used), Year of construction: 2005, Log turner Tähkä, infeed-outfeed conveyors, log correction hydraulic crane Loglift 105 Iedpoy Dpmhefx Aqueau

Condition: new, The new Heinola SM chipper canter is now available for sale. It features two 160 kW motors and two chipper heads, each equipped with five straight chipper knives. The total weight of the unit is approximately 14,000 kg. Iaedpfx Aowfr Nuequju

Condition: refurbished (used), Debarking machine Valon Kone VK - 450 2RE Debarker with infeed conveyor, for log size either up to 450 mm, reducer rotor and debarking rotor. The debarking rotor bearing is new.. The machine has been overhauled. Ijdpsxhdtzefx Aqujau 6-month warranty