Condition: excellent (used), variable regulated feeder table dimensions 600x800mm Nsdoy N N Naopfx Ad Rslb screw band tension dimensions 1500x1100x2400mm

Condition: good (used), Year of construction: 1992, functionality: fully functional, total length: 5,700 mm, total width: 1,600 mm, total height: 1,600 mm, 3 sanding units with 60 mm sanding belt width Nlodpfey N Nxbox Ad Rsb 1 brushing unit

Condition: new, Year of construction: 2024, Working width: 950 mm Workpiece height min: 4 mm Workpiece height max: 170 mm Height adjustment: electronic Workpiece thickness display: digital Control system: Fox 500 KTR Units: 1 1st unit: Combination unit for calibration and sanding / Helically grooved steel roller Ø 120 mm with fine height adjustment / Hard sanding pad with graphite lining Deburring brush: no Motor power: 7.5 kW Extraction port: 140 mm Machine length: 1388 mm Machine width: 1545 mm Nsdsknyhlspfx Ad Rslb Machine height: 1668 mm Weight: 660 kg

Condition: new, Year of construction: 2023, Working width: 1100 mm Minimum workpiece height: 4 mm Maximum workpiece height: 170 mm Height adjustment: electronic Workpiece thickness display: digital Number of units: 2 1st unit: Helically grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off for the roller 2nd unit: Combination unit with finely adjustable working height for calibration and fine sanding: rubber-coated roller Ø 120 mm (45 Sh), hard sanding shoe with graphite coating on an interchangeable insert and pneumatic on/off of the roller Segmented sanding shoe: elastic, sector spacing 56 Control system: FOX 500 KTR Dust removal brush: no Motor power: 15 kW Njdpfx Adeirmg Uo Rslb Extraction connection: 2 x 140 mm Machine length: 1650 mm Machine width: 1820 mm Machine height: 1960 mm Weight: 1170 kg

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 4/3509, power: 2.2 kW (2.99 HP), Model: LZK 3/4. Machine No.: 4/3509. Belt dimensions: 150 x 2600 mm. Feed unit: Masterwood type MEC 8V. Main motor: 2.2 kW. Oscillation motor: 0.18 kW. Nlodpfx Aey Nz H Dsd Reb

Condition: good (used), Year of construction: 2002, functionality: fully functional, Veneer sanding unit, 4 kW, 400 Volt, oscillation, running gear, motor power 2.2 kW, 4-roller feed, Haffner infinitely variable feed, sanding belt 2640 x 150 mm, table 960 x 460 mm, tilting range 45°-90°, 2 x 100 mm diameter extraction, length 1800 x 1000 mm, weight 310 kg in good condition Nlsdpoyayutefx Ad Rsb available approx. mid/end of May 2026 – price ex location Transport available at extra cost! Due to the age of the used machine, warranty is excluded when selling to commercial customers.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: VO995, total length: 1,700 mm, total width: 1,000 mm, total height: 1,150 mm, table length: 880 mm, table width: 370 mm, overall weight: 260 kg, power: 2.2 kW (2.99 HP), grinding width: 150 mm, grinding length: 2,580 mm, Machine type: LVO 120, Machine number: VO995, Year of manufacture: 2009, Main motor: 2.2 kW, Oscillating motor: 0.11 kW Nedpfoy Nznujx Ad Rolb

Condition: excellent (used), Year of construction: 2013, operating hours: 1,395 h, Calibration and finishing machine, wide-belt sanding machine Kundig Brilliant with electronic segment sanding shoe, adjustable sanding head and lacquer finishing. A video of the machine in operation can be sent upon request. Ideal sanding machine for interior design companies, also suitable for lacquer intermediate sanding. Sanding machine with a combination unit and electronic segmented pressure bar. Edge segments can be switched on and off. Segment width of the pressure bar 22mm (ideal for lacquer intermediate sanding). Pneumatically adjustable calibration roller, grooved, rubberized roller with grit compensation. Nlodpfxeyxg N Ne Ad Rsb Drive motor 11kW. Infinitely variable sanding speed of 3 - 15 m/s via frequency inverter. Belt feed speed infinitely adjustable from approx. 3 to 15 m/min. Belt blowing device workpiece-controlled. Constant table height approx. 950mm by adjusting the machine upper part, thus also integratable in sanding lines. Feed belt still has good grip and is in very good condition. Carpet with adjustable vacuum blower, so small parts can also be held securely. Maximum sanding width approx. 1100mm. Workpiece height approx. 3.5 to 200mm. Sanding belt dimensions 1120 x 2000mm. Infeed roller table and outfeed roller table. Hood locking. Dust extraction connection 1 x 180mm, 1 x 125mm. Terminal control with 45 programmable sanding programs for automatic machine control. Parameters: belt speed, feed speed, workpiece height, belt blowing nozzle, vacuum blower, adjustment of the calibration roller and the parameters of the segment sanding shoe. Thickness measuring system with adjustable chip removal and Enormatic with automatic thickness setting and feed release, thus eliminating the need for constant re-measurement with the caliper. Programs for different sanding tasks can be stored and selected via smartselect. CE marking. Operating manual. 2 sanding inserts available. The four bellows have been renewed. Without the shown connection cable. Original paint, only a few spots have been touched up. Very good condition from a small company. Machine has approx. 1395 operating hours, i.e. approx. 2 hours per week. Dimensions approx. 1900 x 1650 x 2150mm (LxWxH). Weight approx. 2300kg. With a large, mobile storage table at the height of the belt, for storing the sanding belts. Table size approx. 1520 x 1360 x 950mm. Including various sanding belts from K80 to K400. The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: used, Year of construction: 1986, Max. working width: 1300 mm Number of belts: 3-belt 1st unit: Shoe unit 1st roller diameter: 100 1st unit design: steel roller/shoe 2nd unit: roller/shoe 2nd roller diameter: 100 2nd unit design: steel roller 3rd unit: roller/shoe 3rd roller diameter: 100 mm 3rd roller design: grooved steel roller 3rd unit sanding shoe: electronic individual elements Cleaning brushes: Yes Paint sanding possible: Yes Belt blow-off: Yes Vacuum carpet: Yes Nledpsvvki Nefx Ad Rob Storage location: Nattheim

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Nlsdpevvkipsfx Ad Reb

Condition: used, Year of construction: 1997, Number of belts: 1 belt, max. clearance height: 150 mm, max. working width: 1100 mm. 1st unit: Combination unit. 1st roller diameter: Steel roller. 1st unit design: Roller/shoe unit. 1st sanding shoe design: Electronic individual links. Segment width: 50 mm. 1st sanding belt length: 1900 mm. 1st sanding belt width: 1120 mm. Motor: 1 kW. Feed speed: 4 and 8 m/min. 2nd unit: Dust brush. Approx. weight: 2000 kg. Dimensions: 1800 x 1450 x 2120 mm. Nlodpfsvvkkajx Ad Rjb Storage location: Nattheim

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Nodjwhqprepfx Ad Rjlb

Condition: used, Year of construction: 2022, Oscillating cylinder sanding machine, technical specifications: A possible screw variant for spindle sleeve clamping. Something similar to a ProLoc device is used. Storage location: Nattheim Nlodpfx Adswhqplj Rob

Condition: used, Year of construction: 1993, used good condition cleaned function tested partially overhauled With 1 / 2 / 3 sanding units: 3 Number of calibration rollers: 2 Roller table at outfeed mm: 350 Automatic workpiece thickness adjustment / scanning Make: Viet Model: Target 321 Year of manufacture: 1993 Machine no.: 371293333 Working width approx. mm: 1100 Passage height approx. mm: 160 Calibration roller units: 1 with air shoe Calibration roller power kW: 11 + 11 incl. shoe unit Calibration roller, grooved: 2x Calibration roller, rubber-coated: 2x Diameter mm: 150+220 Combo unit: 1 with air shoe Combo unit power kW: with 2nd calibration roller 11 kW Extraction connection mm: 3 x 160 Space requirement approx. L x W x H mm: 2200 x 2000 x 2200 Nlsdoy Nn Axepfx Ad Reb Weight approx. kg: 2300 Total connected load approx. kW: 23.5 Location: 97447 Gerolzhofen, free loaded, unpacked Handover: Handover in current condition as inspected without guarantee or warranty.

Condition: used, Year of construction: 1995, used good condition cleaned function tested partially overhauled fully adjusted With 1 / 2 / 3 pcs sanding units: 2 pcs calibration roller: 1 pcs combination unit with air shoe / electronic shoe: 1 x air shoe Constant table – consistent infeed height Automatic workpiece thickness adjustment / sensing Programmable control Brand: Kündig - Enorm Model: Duplex 1100 Year of manufacture: 1995 Machine no.: ESG-24384 Working width approx. mm: 1100 Pass-through height approx. mm: 3 - 160 Number of units pcs: 2 Units from above pcs: 2 Belt dimensions l x w mm: 1120 x 2000 Feed speed m/min: 2 - 15 pcs calibration roller: 1 Calibration roller grooved: yes pcs shoe unit: 1 Shoe unit (air shoe): yes Thickness adjustment electric / automatic / with sensing: yes Constant table, consistent infeed height: yes Nledpfx Aoy Nn Arod Rsb Required space approx. L x W x H mm: 1500 x 1700 x 2000 Weight approx. kg: 2000 Total connected load approx. kW: 20 Location: 97447 Gerolzhofen, free loaded, unpacked Handover: Handover in as-inspected condition, as seen, without any warranty or guarantee.

Condition: used, Year of construction: 1996, MACHINING CAPACITIES: - Height (thickness): 3 to 160 mm Nledpfxjy I Srzs Ad Reb - Maximum workpiece width: 1100 mm - Minimum workpiece length: 390 mm - Abrasive belt speed: 18 m/s - Conveyor feed speed: 4.5 – 9 m/min - Suitable belt dimensions: 2150 x 1115 mm MACHINE CONFIGURATION: - 4 infeed rollers and 4 outfeed rollers - Table positioning with sensor - Vacuum conveyor system (perforated belt and motorized fan) - Pneumatic foot switch 1) Calibration 2) Calibration / sanding 3) Finishing sanding MACHINE SPECIFICATIONS: - Main power supply: 400V, three-phase, 50Hz - Automatic star-delta starter - Ammeter(s) for power consumption monitoring - Pneumatic tensioning, oscillation, and retraction of rollers - Pneumatic supply, working pressure: 6 bar - Dust extraction, 3 upper ports, Ø mm Recommended air flow: 2500 m³/h per hood Note: For optimal performance, please ensure that sanding belts are released when the machine is not in use, and avoid any moisture, including condensation, inside your facility during winter. Machine dimensions: 1920 x 2050 x h.2240 mm

Condition: excellent (used), Catalogue number 7976 TECHNICAL SPECIFICATIONS - Max working width: 1100mm - Max working height: 160mm Nledpfx Aey E Iycsd Reb 2 units: 1) Grooved rubber roller for calibration 2) Pneumatic shoe + 2 metal rollers – From above: - 2 slip metal rollers - Pressure device - Working unit - 2 slip metal rollers - Working unit - 2 slip metal rollers - Cleaning brush – From below: - 2 slip rubber rollers - Feed belt - Pneumatic belt oscillation with photocells - Electric table lifting - 2 feed speed options - Operating pressure: 8-10bar - Extraction port diameter: 2x200mm - Total power: 30kW - Overall dimensions (L/W/H): 2230x2020x2050mm - Weight: approx. 3000kg ADVANTAGES – German-made – 2 working units – Used sander, in very good condition Net price: 16,900 PLN Net price: 4,000 EUR depending on the 4.2 EUR exchange rate (Prices may change with major fluctuations)

Condition: excellent (used), OMAB/Comec curved part grinder Working width 200mm Sanding belt oscillation Pneumatic material clamping Main motor 5.5kw Feed motor 0.25kw Extraction stubs 2x100mm Nlodotvfmhepfx Ad Rsb Dimensions of the machine 210x80x150cmH Weight 450kg

Condition: excellent (used), functionality: fully functional, Double-sided grinder Grützmacher GSP10 Working width: 200-1000 mm Working height: 230 mm Number of units: 2 Mechanical oscillation of sanding belts Pneumatic head approach Grinding motor power: 2×7.5 kW Oscillation motor power: 2×0.15 kW Sanding belt: 2500x250 mm Exhaust ports: 2x140 mm Nlodexmgrqjpfx Ad Rsb

Condition: good (used), Working width: 960 mm 1 combined unit Shaft diameter: 160 mm Processed material height: 160 mm Nledpfx Aey Izlqjd Rob Abrasive belt dimensions: 990x1800 mm Extraction port diameter: 140 mm Electric lift Digital display Safety switch Main motor power: 11 kW Voltage: 380V Overall dimensions: Length: 1550 mm Width: 1680 mm Height: 2200 mm

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Selling on behalf of a customer: OTT OMEGA wide belt sanding machine – with polishing brush. Year of manufacture: 2000 Sanding belt width: 1,350 mm Equipped with 2 sanding units With vacuum sanding system With polishing brush and additional cleaning brush The machine can be inspected while running at the customer's location. Nsdpfx Ajy Iyvzjd Rolb

Condition: excellent (used), Year of construction: 1992, Wide Belt Sander VIET Target 211 A Calibration and fine sanding machine with 2 sanding units and one motor, sanding from above Nlodpfx Aey Exhwod Rjb Working width: 1100 mm Abrasive belt dimensions: 2200 x 1130 mm Workpiece dimensions: 4 – 160 mm Motor for table height adjustment: 0.18 kW, 400 V, 50 Hz Main motor: 8.0 kW, 400 V, 50 Hz 2 feed speeds 1st unit: Rubber-coated sanding roller, 90 Sh, 2nd unit: Fixed sanding pad & air cushion sanding pad, timer controlled Compressed air requirement: approx. 6 bar Extraction connection diameter: 2 x 150 mm Approx. dimensions (L x W x H): 1700 x 1750 x 1800 mm Weight: approx. 1,400 kg Automatic workpiece thickness adjustment with digital display Workpiece thickness adjustment via foot pedal Automatic conveyor belt centering Abrasive belt oscillation Abrasive belt (emergency) stop with disc brakes Table extension with 2 rollers at infeed and outfeed Emergency stop Main switch CE compliant INCLUDES many sanding belts INCLUDES 2 pcs newly covered graphite sanding pad inserts NEW bearings for return rollers NEW drive belts for the motor Note on used machinery: • Errors in technical specifications and prior sale excepted. • Stated prices are ex works - free loading! • Machines have been cleaned and tested for functionality. • All machines are sold as inspected, without any claim to warranty. Buyers are welcome to inspect the machines on site. • Special arrangements are only possible in writing. (Enquiries are only answered if you provide your address and telephone number!)

Condition: good (used), Code: 0026 Brand: GNT - ITALY Model: S 1300/2 Automatic cleaning machine for top and bottom surface cleaning of melamine covered panels, laminate, pvc, etc. Composition: Steel base Top and bottom cleaning unit composed of : dusting brush of special wire for dust elimination, wiping blade for residue cleaning, humidifyng group with one rubber and one milled metal roll, two brushes for finishing - reservoir for the cleasing liquid, recirculation pump made of stainless material Independent brush and felt rolls control to get back wearing down Nlsdpfx Ajvw Uf Ded Rob Motorvariator with continuous adjustment for advancement Motorvariator with continuous adjustment for humidifyng unit Brushes to clean the finishing felt rollers Residue collection tanks Emergency device to check thickness Technical data Working width mm 1300 Working height mm 6/80 Feed speed from 5 to 20 mt/min Working height mm 800 N° 3 dust hoods mm 150 Installed power: Motorvariator for advancement Kw 0,37 - Motorvariator for humidifying group rollers each Kw 0,37 - Brush motor 1 Kw 0,75 - Absorbed power consumption Kw 17 Overall dimensions mm 2600 x 2280 x 1360 h Weight kg 2250

Condition: good (used), Code: 0217 Brand: SAMCO Model: F 3000 Nlsdpexivycjfx Ad Rjb Belt sanding machine with double gooseneck and 3 motors, for wood, carpentry, metals, aluminum, composite materials, and various other materials Technical data: Table length mm 3000 Table width mm 800 Vertical adjustment of table mm 850 2-speed belt motor rpm 1400/2800 - Hp 3/4 Automatic table lifting Sanding belt length mm 8000 Sanding belt width mm 120 Gooseneck useful depth mm 600 Gooseneck height mm 200 Overall dimensions mm 4300 x 1500 x 1800 h Weight kg 740

Condition: good (used), Code: 0424 Brand: DMC - ITALY Model: EUROPA 120 Automatic 2-belt calibrating sanding machine for wood, furniture, furnishings, wooden frames, doors, panels, composite materials and various Technical data: Nledsv A Ta Depfx Ad Rjb Sturdy construction Max working width mm 1200 Max working height mm 170 Abrasive belt size mm 2200 x 1250 1° Group Rubber Calibrating Roller - Diameter mm 220 - Adjustable workpiece holding pressure brackets - Motor Hp 20 2° Group Finishing Pad with adjustable pressure - Motor Hp 10 Abrasive belt cleaning blowers Belt feed speed variator from 3,5 to 17,5 mt/min Vacuum table - Motor Hp 7,5 Automatic table lifting Automatic table positioning N° 2 suction inlets diameter mm 200 Working pressure 7 bar Overall dimensions mm 1900 x 1800 x 2100 h Weight kg 2500