Condition: good (used), total length: 1,030 mm, total width: 900 mm, total height: 1,400 mm, table length: 900 mm, table width: 720 mm, power: 1.47 kW (2.00 HP), rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, The machine is cleaned and working. Motor 2 HP 380V 1500 rpm Debst Sr H Re Etwq Tokl

Condition: used, Double belt horizontal sander (rough and fine) Dkjb Etwqsq Rkuwo Tel

Condition: excellent (used), 1100 Dsb Etet Hgmzewq Tokl

Condition: reconditioned (used), Year of construction: 1991, Functionality: fully functional, grinding width: 1,100 mm, "M.-No. 2679, built 1991, Technical data: max. working width: 1100 mm, min./max. workpiece thickness: 3 / 160 mm, sanding belt dimensions: 2150 x 1120 mm, sanding belt speed: 18 m/sec., feed speeds: 4 + 8 m/min, Motor power sanding unit: 11 kW, power setting: 0.55 kW, feed carpet: 1.3/1.8 kW, operating pressure: 6 bar, air requirement: 10 l/min., extraction sockets: 1 x 150 + 1 x 120 mm, WxDxH: 1800 x 2000 x 2100 mm, weight approx. 2400 kg, Deb Etetppz Iowq Tokl Standard equipment: - Contact roller D=150 mm, hardness 90° Shore - Air sanding pad with automatic insertion and removal - Rigid sanding pad for solid wood frame sanding - Brush roller driven by the sanding unit - Automatic centering of the feed carpet - Feed carpet with high-quality rubber circular hole carpet and auto. Carpet centering - pneumatic sanding belt tensioning with length compensation - non-contact sanding belt oscillation, electronic - low-wear disc brake system for immediate stop of the sanding belt drive with pressure monitor - motorized thickness adjustment with digital display - workpiece thickness limiter at the infeed - semi-automatic workpiece thickness adjustment - grit thickness compensation for contact roller 4-fold, special accessory: workpiece thickness gauge".

Condition: used, Year of construction: 2004, - Cutting width (mm): 1300 - Workpiece thickness max. (mm): 3 -140 - Brushing device: Brush roller diameter 150 mm - Drive for brush-off device (kW): 1.5 - Transport bed: 3.0 kW FU 4.0 kW - Feed speed (m/min.): 5 - 25 - Workpiece conveyor belt suction clamping system (kW): 7.5 - Total weight (kg): approx. 7500 - Total power connection (kW): approx. 73 Dkob Etwqott Slco Tel

Condition: good (used), Year of construction: 1995, table height: 1,000 mm, Calibration Machine / Wide Belt Sander make Costa type 71 CCT 1350 working width 1300 mm equipped with: 1x calibration roller (hard rubber approx. 80 Shore), 22 kW, sanding belt dimensions 1380 x 2620 mm 1x calibration roller - newly rubberized (hard rubber 60 Shore), 18,5 kW, sanding belt dimensions 1380 x 2620 mm 1x sanding shoe / pad, 15 kW Dkjb Etop R Rnhjwq Tjl 1x dust removal brush 1x blast unit feed speed adjustable, 4 - 24 m/min. conveyor belt with vacuum vacuum blower with silencer working height 1000 mm Height adjustment of the machine head (easy integration into existing machine line) connection: 380 V 50 Hz, 200 A total connected load approx. 65 kW dimensions approx. 3000 x 2500 x 2400 mm (LxWxH) weight approx. 4000 kg

Year of construction: 1977, Condition: ready for operation (used), Wide belt sander Bütfering see pictures Machine is immediately available Machine ran until a few days ago without problems in production but was very rarely used Dkebendccto Etwq Tel

Condition: used, Year of construction: 1998, Brushing machine for elements brand Camam model C/1N/1S serial number 98001 year of construction 1998 branded CE powered 380V 4.5 Kw 13 A ground 530 Kg. complete with declaration of conformity and manual of installation and d. Dkjb Etelagc Sewq Tsl

Year of construction: 1990, Condition: used, Table dimensions 1200 x 500 mm Dkeb Etsh Tvf Dswq Tjl sanding belt measurements 90 mm Weight 150 kg

Condition: used, Functionality: fully functional, 0,75 kW Spraying device Lamella star 150/70/25 mm sisal/leather/plastic fabric Lamellar star 150/70/25 mm sisal/plastic fabric Flanges 70 mm reduced to 11 mm (2 pcs.) Metal Control panel top 4 motors à 0,18 kW for brushes Dsb Etwqjigaf Rj Tekl

Condition: used, Year of construction: 2004, - Cutting width (mm): 1300 - Workpiece thickness max. (mm): 3 -140 Longitudinal sanding units: - Longitudinal sanding unit 1: Sanding belt speed 24 m/s - Longitudinal sanding unit 2: Sanding belt speed 24 m/s - Longitudinal sanding unit 3: Sanding belt speed 24 m/s - Longitudinal sanding unit 4: Sanding belt speed 10 + 20 m/s - Longitudinal sanding unit 5: Sanding belt speed 10 + 20 m/s - Longitudinal sanding unit 1: Motor power 55 kW - Longitudinal sanding unit 2: Motor power 55 kW - Longitudinal sanding unit 3: Motor power 45 kW - Longitudinal sanding unit 4: Motor power 18 / 21.5 kW - Longitudinal sanding unit 5: Motor power 18 / 21.5 kW - Brushing unit: Brush roller diameter 150 mm - Drive for brushing unit (kW): 1.5 - Transport bed: 11 kW FU 22 kW - Feed speed (m/min.): 5 - 25 - Workpiece suction unit (kW): 15 - Total weight (kg): 12800 Dkeb Ejtt Sb Tjtwq Tol - Total power connection (kW): approx. 245

Year of construction: 1988, Condition: excellent (used), utomatic wide belt sander with 2 belts for varnish, wood, veneer, composite materials and various materials Technical data: Working width mm 1350 Max useful height mm 130 Belt size mm 2450 x 1350 Composition: 1° Group: Sanding roller diameter mm 320 - sh. 60 - Blowers cleaning belts - Motor Kw 11 with speed variator 2° Group: Sanding roller diameter mm 320 - sh. 40 - Blowers cleaning belts - Motor Kw 11 with speed variator Scotch brite - Motor Kw 1,5 Vacuum table - Motor Kw 5,5 Feed belt speed variator 4/19 mt/min Operating pressure 7 Bar equipped with Abrasive belts series Djbegmbu Ij Etwq Tokl Overall dimensions: machine mm 2000 x 2700 x 2500 vacuum pump mm 800 x 700 x 900 h

Condition: used, Chair seat sander Dkob Ejqgtbletwq Tol

Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 9958, Power supply 380V 7,3kW suction 1x120 mm 1x180 mm grinding table 2850 x 1550 mm sanding belt dimensions 7820 x 150 mm table height adjustment via hand wheel Djbeiau Tle Etwq Tekl LxDxH: 4400 x 1700 x 1450 mm weight approx. 1100 kg

Year of construction: 1997, Condition: good (used), - Working width (mm): 1300 Dob Ejidi Ivetwq Tjkl - CSD system - Cross sanding unit - Longitudinal sanding unit - Shoe - Brush unit - Ionization

Year of construction: 1999, Condition: used, Vertical sander with loader, automatic Dksb Eep Acdwetwq Tol

Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 3898 77/2, Oscillation 3 feed speeds Belt blow-out missing: frame support rear stop bar (metal) ATTENTION: front door was cut through at the top (2 parts) The carpet is fine!!! Deb Etwoigab Usq Tskl

Condition: used, - engine (hp): 1/1.9 - engine (rpm): 710/1420 Dksb Etwqsm R Ils Tel - Motor (V): 380 - Motor (A): 3.7/3.8

Condition: as good as new (ex-display), Year of construction: 2021, Functionality: fully functional, grinding width: 1,350 mm, SCM wide-belt calibrating and fine sanding machine Model dmc sd 60 RCS 135 Technical data: Working width 1,350 mm min./max. working height 4-170 Sanding belt width 1,370 mm Sanding belt length 2,150 mm Main motor power 11 (15) kW (HP) Gear motor 0.45/0.8 (0.6/1.1) kW (hp) Feed speed 4.5/9 4.5/9 m/min. Standard equipment: - R140/85 rubber-coated calibrating roller diameter 140 mm 85 SH - 1st pos. - R160/45 rubber-coated sanding drum diameter 160 mm 45 Sh - 2nd pos. - Hard sanding pad with manual adjustment of the working height - Motor power 1 unit 11 kW (15 HP) Dksb Etotwqn Sjwq Tel - Electronic ammeter for the main motor to display the power consumption - Electronic display of the working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - anti-kickback device in the infeed before the first unit - Rubber feed carpet 60 SH - Roller table with two rollers in the infeed and outfeed of the work table - Carpet feed with two speeds 4.5 / 9 m/min with gear motor - Automatic carpet centering incl. the following special accessories: 1 pc. Version "B" for RCS with: pneumatic activation and deactivation of the roller 1. unit "R" + pneumatic activation and deactivation of the roller 2. unit "CS" + "MESAR" elastic link sanding shoe + pneumatic activation and deactivation of the sanding shoe unit + electronic programming unit "LOGIC 50 + electronic adjustment of the working height 1 pc. CE safety regulations 1 pc. roller table in infeed and outfeed for long workpieces, equipped with 5 non-driven rollers 1 "RA" inclined ribbed steel contact roller 1st unit 1 pc. Main motor 18.5 kW (PS 25)

Condition: used, - Sanding belt: oscillating - Pivotable - Driven roller: in table Dksbom Sf Do Etwq Tjl - Fields of application: Mouldings, round arches etc.

Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 10728, Table size 2300 x 900 mm Deb Esiyp Rfstwq Tekl

Condition: new, 1. steel roller diameter (mm) 120 2. Rubberized working roller diameter (mm) 160, 455h Sanding belt (mm) 1120 x 2200, 1 piece per sanding unit Main engines (kW) 2 x 11 (15 HP) Motorized table stroke - Work piece height (mm) 3 - 160 Automatic star/delta starting of the motor Sanding roller lifting for 1st unit from the front control panel - Dsb Etwjfhmgceq Tjkl pneumatic Sanding roller lifting for 2nd unit from the front control panel - pneumatic Pneumatic grinding shoe PL 2 Amperemeter - for measuring the current of the motors of the grinding units Sanding belt oscillation control - with the help of an optoelectronic reader with infrared beam Automatic feed belt centering Table Positioner Electronic measurement of the table position with digital display Frequency converter of the feed belt speed (m/min) 3 - 15 Rubberised pressure rollers Emergency-off pneumatic disc brake of the main engine Mechanical limitation of the maximum chip removal of the workpiece Noise protection Power supply 400 V/50 Hz Machine built to CE power and safety standards Additional equipment on request

Condition: reconditioned (used), Year of construction: 1987, Functionality: fully functional, machine/vehicle number: 9673240, grinding width: 1,100 mm, power: 15 kW (20.39 HP), height adjustment type: electric, grinding belt length: 1,900 mm, compressed air connection: 6 bar, grinding belt width: 1,120 mm, Combination sanding unit with contact roller and air sanding pad Brush roller Pneumatic sanding belt tensioning Motorized thickness adjustment Technical data max. working width 1100 mm Dksb Eotppzvotwq Tel max. workpiece thickness 150 mm min. workpiece thickness 3 mm Sanding belt dimensions 1900 x 1120 mm Feed speed 5/10 m/min. Motor power sanding unit 15 kW Motor power height adjustment 0.50 kW Motor power feed carpet 0.5/1.0 kW Operating pressure 6 bar Air consumption approx. 20 l/min Suction nozzle 2 x 200 mm Weight approx. 2100 kg Machine width approx. 1750 mm Machine depth approx. 1700 mm Machine height approx. 1900 mm

Condition: used, - For grinding curves and inner radii Djbsghrz Sj Etwq Tjkl