Condition: like new (used), Working width: 300 mm Delip T Dev Ai D Eetokl Working height: 200 mm Mechanical oscillation Rubber roller + shoe Two-stage feed speed Weight: 800 kg Star-delta motor start

Condition: like new (used), Year of construction: 2011, DMC USK 1350 M3 wide-belt sander - Italian production Dslip T Dsgr Er Sotekl - transverse aggregate so-called sergeant - year of production 2011 - electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum workpiece length 365 mm vacum table 1 aggregate: transverse tape, the so-called sergeant engine power 12 kW 2nd aggregate: rubber shaft hardness of 95 shore diameter 240 mm engine power 18.5 kW 3rd aggregate: rubber shaft hardness of 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW 5 aggregate - cleaning brush - 2.2 kW 6 aggregate - blowing blowing on the tape pneumatic oscillation feed speed 2.5 - 18 m / min pneumatic straps tension electric height adjustment spigots diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (length / width / height) 370/250/250 cm weight 5000 kg

Condition: used, Year of construction: 1994, Functionality: fully functional, machine/vehicle number: SA002264, working width: 1,300 mm, working height: 160 mm, power: 18 kW (24.47 HP), height adjustment type: electric, type of input current: three-phase, table height adjustment: 160 mm, input frequency: 50 Hz, input voltage: 380 V, frequency: 50 Hz, DMC EUROPA 130 Calibrating Sander Dkolip Tov Ia E Rs Dtjl Powerful machine, requires sanding the carpet for grip

Year of construction: 2022, Condition: new, 1 HEESEMANN Demo Multi-purpose surface sanding machine Year of construction 2022 Working from the top – Sanding width 1,600 mm ROLLER/LONGITUDINAL/DB-S 1 construction with transport bed Continuous transport carpet, transport belt cleaning device, variable feed speed 5 - 25 m/min, constant working height 880 mm, machine upper part motorically adjustable according to panel thickness (3 - 150 mm), including integrated control cabinets. 1 Pressure roller (Ø 70 mm) 1 Industrial PC 21,5” Full HD Program memory for 1000 programs 1 Longitudinal sanding unit with contact roller for calibration work (steel) Diameter: 250 mm Sanding belt dimensions: 2,620 x 1,650 mm Belt speed: 24 m/s Drive power: 30 kW 1 Longitudinal sanding unit with pressure segment belt Sanding belt dimensions: 2,620 x 1,650 mm Belt speeds: 1.8 - 9 m/s (with pressure lamella belt) 1.8 - 18 m/s (without pressure lamella belt) Drive power: 22 kW frequency converter Continuous adjustment of sanding belt speeds 1 Pressure beam with computer-controlled selective pressure regulation - CSD® system 1 Rotating disc brush unit DB-S 12 driven disc brushes, operating in 2 directions of rotation. 1 Brush roller unit Panel clamping system For the secure transportation of panels shorter than 500 mm in the feed direction, including an integrated fan. Dksljmqma Hsip T Dtel 1 Panel blasting device with rotating compressed air nozzles

Condition: good (used), High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle -Handover: in current condition as viewed -Condition: without grinding spindle -Grinding spindle for: Lathe -electric: operated Dkjlip Tjvzxlis Dtsl -Motor: VEM 0.75 kW -Bracket: Ø 80 mm -Dimensions: see photos -Total dimensions: 600/370/H350 mm -Weight: 60 kg

Condition: new, Bernardo edge sanding machine KSM 3000 C with veneer sanding device Technical specifications working table 960 x 350 mm table height adjustment 210 mm belt length 3000 mm belt width 150 mm sanding belt back 1060 x 200 mm sanding unit swivelling 90° - 45° belt speed 20 m/sec. additional table 330 x 330 mm Oscillation stroke 20 mm Oscillation motor 0,25 kW (0,34 PS) suction connection Ø 120 mm Motor output power S1 100% 3,0 kW (4,0 PS) Motor input power S6 40% 4,5 kW (6,0 PS) Voltage 400 V Machine dimensions (W x D x H) 1910 x 840 x 1020 mm Weight approx. 330 kg Scope of delivery Sanding belt 3000 x 150 mm - K100 Sanding belt oscillation Veneer sanding device additional table Graphite coating Mitre fence Sanding shoe Suction hose Features - Heavy machine stand in torsion- and vibration-free construction, extremely stable - Grooved infeed fence, ideal for sanding veneer overhangs - Suction connection 80 / 100 mm on both sides for optimum chip removal - Oscillating sanding belt ensures high stock removal and a clean sanding pattern - Maintenance-free sanding belt oscillation with separate gear motor, optionally switchable - Height-adjustable sanding table for utilisation of the entire sanding belt - Standard veneer edge sanding device with fine adjustment - Quick changeover from veneer to solid wood sanding possible Dsliod N Tdmsp T Dtokl - Height adjustment of the working table or swivelling of the sanding unit via handwheels - spring

Condition: like new (used), Table length: 2500 mm Table width: 800 mm Motor power: 3 kW Power supply: 380 V Delip T Djv Aai Sstjkl Belt width: 150 mm Weight: 325 kg

Condition: used, Year of construction: 2013, machine/vehicle number: 15513, Polishing machine Gottschild HBS 1600-750-100-1(2) The Gottschild grinding and polishing machine offers a wide range of applications, from the production of high gloss furniture fronts, glass panels to Corian • grinding and polishing. • Easy change between grinding and polishing head • with sinusoidal tool head oscillation, for an even better uniform high- gloss surface which satisfies even the highest demands. • with automatic part detection (machine only designed for rectangular parts) Technical data: • Type: HBS 1600-750-100-1 • Year of manufacture 2013 • Electrical connection 400V, 50 Hz, 4,5 kW, 10 A • Compressed air 6 bar connection adjusted to 5 bar • Conveyor belt 1.600 mm x 940 mm • part width: 90mm- 750mm (without tool brigde 850mm) • part length: 150 mm - 2.800mm • part heights 8-100 mm (extended working height) • Frame size 1600 mm x 1200 mm • Rack height approx. 960 mm ± 25 mm • Frame material welded steel tube • Support for superstructure aluminum profiles • Belt cleaning manual every 8 hours • Safety devices emergency stop. • The machine has to be shielded by protective walls if the machine is delivered without housing. • Polishing motor 400V, 50 Hz, 0,75 kW with planetary gearbox • Control Siemens/Vipa S7 PLC, parameters via KEB Touch Panel Dkolip T Dju Afu Djtsl • Frequency converter KEB • Control elements control ON/OFF, RESET, START/STOP, program interruption, grinding head speed, oscillation speed and belt speed • Tool bridge: Tool bridge with polishing head, consisting of a linear profile system, driven by linear cylinder. • Without polishing pad for the polishing head Location: not on stock

Condition: excellent (used), Year of construction: 2004, Calibration / sanding line top bottom COMPACT - SATURN 135 R.R.K Inf and SATURN 135 RRK Sup RRK Inf: Motorized up/down adjustment with electronic thickness display - Fixed worktable height 950mm-Automatic belt centering - Working width 1350mm - Thickness 3-165mm - Strips 2620x1365mm 1- Steel roller D=250mm - 30kw motor 2- Roller 90sh D=250mm - Motor 18.5kw 3- Roller 44sh D=220mm with skid - Motor 15kw Settings and position displays on each group - Selector for activation or deactivation of each group roller - belt feed motor with inverter 5.5hp - belt feed speed 3 to 18m/min - blower oscillation timed cleaning - vacuum device with 10hp fan - CE standards RRK Sup: motorized up/down glide with electronic thickness display - Fixed worktable height 950mm- Automatic belt centering - Working width 1350mm - thickness 3-165mm - belts 2620x1365mm Dslip T Deugr Iietokl 1- Steel roller D=250mm - 30kw motor 2- Roller 90sh D=250mm - Motor 18.5kw 3- Roller 44sh D=220mm with skid - Motor 15kw Settings and position displays on each group - Selector for activation or deactivation of each group roller - belt feed motor with inverter 5.5hp - belt feed speed 3 to 18m/min - blower oscillation vacuum device with 7.5 hp fan - elevating platform for in-line operation machine in working line: height 950mm - CE standards spare parts stock with additional roller

Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, machine/vehicle number: SA/006059, feed length X-axis: 1,350 mm, overall weight: 3,260 kg, Robust contact sander with 3 rollers, 1350 mm wide Dolovnz Rboip T Dtskl

Condition: good (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: A050694, total length: 4,500 mm, total width: 1,000 mm, type of input current: three-phase, overall weight: 850 kg, height adjustment type: mechanical, input voltage: 400 V, extraction connection diameter: 160 mm, frequency: 50 Hz, grinding width: 140 mm, Grinder for narrow surfaces with the possibility of milling edges and grinding them. At the beginning there are two sanding units with oscillation and 160 mm wide belts, i.e. pre-sanding followed by smoothing, then two units milling the edges from above and below, equipped with cutters for rounding edges r-6 mm and further two units sanding with narrow belts after milling at the end, also with oscillation, and the last seventh unit with a brush wheel for smoothing. The machine is suitable for sanding wooden parts of solid wood and MDF boards, such as countertops of various types, shelves , elements of stairs, doors, windows and other various types of furniture and wooden construction elements. Ready to work possibility to check and start on site. Equipped with several sanding tapes and some parts. Dslipsuynnuj T Dtokl

Condition: new, Edge sanding machine Bernardo HV 80 OSZI work table: 850 x 300 mmTable height adjustment: 90 mmBelt length: 2510 mmBelt width: 150 mmSanding belt rear wall: 950 x 200 mmSanding unit lockable: 90° / 0°Belt speed: 16 m/sec.Additional table: 300 x 250 mmSuction connection: Ø100 mmRoller diameter: 110 mmMotor output power: S1 1005 kW (2.0 PS)Motor input power: S6 401 kW (2.8 PS)Voltage: 400 VMachine dimensions (W x D x H)1400 x 680 x 1220 mmWeight approx. 148 kg Djlip Tsd Tb U So Dtjkl

Condition: like new (used), - Belt width: 150 mm - Grinding possible on the platen or flat surface - Table angle adjustment - Capability to grind curved elements Dkolipovz U Uge T Dtjl - Manual table height adjustment - Motor: 3.4 kW - 380 V - Year: 1992

Condition: used, Year of construction: 2005, machine/vehicle number: 0411490843, With new carpet Technical data: - Manufacturer: Bütfering - Type: Optimat SCO 113/C/DIA - Year of construction: 2010 - Sanding belt width: 1370 mm - Sanding belt length: 2150 mm - Suction volume: approx. 3,530 m3/h - Suction nozzle: 1 x Ø 180 mm (sanding unit) 1 x Ø 140 mm (finishing brush) 1 x Ø 100 mm (suction fan) - Combined sanding unit with switchable sanding sanding drum and sanding pad. - Automatically adjustable, profiled steel steel contact roller with grain equalisation for calibration an electronically controlled pressure beam with lacquer sanding package. - Infinitely variable frequency-controlled sanding belt speed sanding belt speed 2 - 18 m/s. - Vacuum clamping device, fan integrated in the machine stand Djliju U Ry Hop T Dtokl - Drive motor: 15 kw - Total connected load: approx. 19 kw - Operating voltage: 400 V / 50 HZ. - Location: in stock

Condition: used, Year of construction: 1994, from training workshop fully equipped with vacuum clamping pneum. shoe pressure and sanding shoe suction used, top equipment, top condition Make Johannsen Type T 95 Year of manufacture 1994 Mach. no. 20502 GS-tested Motor 5.5 kW Grinding length approx. 2700 mm Grinding width approx. 950 mm Belt length approx. 7800 mm x 150 mm Table size approx. 2780 mm x 950 mm Right offset approx. 550 mm Left offset approx. 550 mm Electric adjustment Upper belt cover Upper grinding support Table lighting Pneumatic grinding shoe pressure Pneumatic belt tension Vacuum clamping device with pump 1 and 5 suction plates 0.55 kW Right-left rotation Belt blow-out Grinding shoe 300 mm x 140 mm with suction New price approx. 15,000.00 EUR Suction connection D 80 / 120 / 140 mm Dkslip T Dov Hhukotol Space requirement approx. 4000 mm x 1600 mm x 1600 mm Total connected load approx. 5.7 kW + 0.55 kW pump Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee or warranty

Condition: good (used), Year of construction: 1989, Table dimensions 2800 x 1250 mm Dkolip Tovzcmwe Dtel throat 550 x 310 / 1000 x 310 mm motor power 5,5 kw sanding belt measurements 150 x 7800 mm mm 340 mm 2600 mm Working width 1000 mm mm Dust suction hood 180 mm

Condition: like new (used), - Manual table adjustment - Manual belt angle adjustment - Belt width: 15 cm - Table width: 45 cm - Table length: 92 cm - Feed speed: 3.7/22 m/min - Motor power: 2.2 kW - 400 V Dkjlipovz Uwzj T Dtjl - Year: 2002

Condition: used, Year of construction: 2017, machine/vehicle number: 16493, - Manufacturer Leif & Lorenz - Type B6 - Working width 1100 mm - Year of manufacture 2017 - 1st unit - Distributor brush system FlexTrim - Motor power 1.1 kW - Brush head speed, frequency converter control - With vacuum conveyor belt - Feed continuously adjustable - Length 1,000 mm - Location, in stock Delipoumvrao T Dtskl - Color RAL 7035 - Volt, HZ 400/50

Condition: used, on a casting machine, grinding machine, belt or roller conveyor Dkjlip T Devvbqwotjl

Condition: used, Year of construction: 2009, Dust removal brush with spiral brush, transverse to the direction of workpiece travel. The dedusting brush is installed on a roller conveyor. - Manufacturer : Venjakob - Height adjustable via a handwheel - Working width: 1.300mm - Total width: 2,450mm of the brush unit - Length: 3,000 mm (2,100 + 800 mm folding table) - Roller diameter: 65mm - Roller pitch: 150mm - Rollers with plastic coating - In stock in Blomberg - Volt/HZ: 400/50 - Extraction system required on site - Suction nozzles 2 pcs - Diameter 120mm each - Volume flow approx. 2,000m²/h - Machine without control cabinet and frequency converter Dolip T Dsuulpqotskl for roller transport, can be offered on request.&nbsp

Year of construction: 2003, Condition: used, Dust extraction with air nozzles and ionization. The air for dedusting is generated by a separate fan generated. No expensive compressed air is required. Technical data: - Manufacturer: Elmag Superfici Dkslisu S N Spep T Dtsl - Type: SF - Year of construction 2003 - Working width 1.300mm - Max. Part height: - Installation length approx. 300mm - Diameter of top suction nozzle: 180mm - Diameter of bottom suction nozzle: 180mm - 27 compressed air nozzles from above - 27 compressed air nozzles from below - Ionizing bar from above and below - 400V/ 50HZ - Location: Blomberg warehouse

Condition: used, Year of construction: 2024, The control of the dust extraction system is switched on and off via 2 sensors. Suitable for installation on an existing transport system Sword brush Micro-moistening of the brush elements by means of an antistatic moistening nozzle from Riepe. Moisturisation can be finely dosed via this nozzle. Cleaning the product surface using Sword Brush technology The dust particles are picked up by the brushes and removed by the suction system. A rotating squeegee and compressed air nozzles ensure constant cleaning of the brush systems. Power channel The power channel contains 14 rotating double power compressed air nozzles, which remove particles and dust from the material surface and from recesses. The suction system removes the loosened particles. Technical data: Power: 0.5 kW Self-cleaning system via the rotating brush Dust extraction: 2 x D120 mm at the top + 2 x D80 mm on the side. Motorised height adjustment Material of the panels to be cleaned: MDF, chipboard with melamine Workpiece length: min. 400 mm Panel width: max. 1,350 mm Workpiece height: max. 80 mm Feed speed: max. 35 m/min Removal standard: workpiece surface dust-free Important: Glue residues are not removed. Dkjlipeun N Aue T Dtol Size of the machine: Width: 2,280 mm Installation length: 500mm

Condition: used, Year of construction: 2002, machine/vehicle number: 02062, The right and left edges are sanded in one pass. Two brush sanding heads are installed on the left and right. Sequence: 1. the parts are conveyed via cross belts installed at 90 degrees to the feed direction to the right side as seen in the feed direction. 2. the right edge is sanded, 2 sanding brush heads are installed, Dkelieuyln Sep T Dtol which are adjustable in height and inclination. 3. the parts are conveyed to the left side at 90 degrees to the feed direction The parts are conveyed to the left side as seen in the feed direction. 4. the left edge is sanded, 2 sanding brush heads are installed, which are adjustable in height and inclination. - Manufacturer: Supferfici, Delle Vedove - Part width: approx. 1,400mm - Height of the sanding head: 80mm - Sanding height: approx. 60mm - Length: approx. 8,800mm - Working height: 880mm - Year of construction: 2002 - For the control of the material a new Siemens S7-1200 is installed. - Location: at the warehouse

Condition: used, Dedusting machine Venjakob with brush for installation on a roller or belt conveyor or grinding machine. Machine without belt conveyor shown on the picture - Producer Venjakob - Working width 1300 mm - Max. part height ~ 10 - 150 mm - Dedusting brush from upper 1 Stk. - Heightadjustment, manually - Zur Montage auf einen Transport oder Schleifmaschine - ohne Schaltschrank - Not in ex-prevention 0,37kW - Connecting piece 2x120 mm - Voltage / HZ 400 / 50 - Location: on stock Dkolipjvupfyj T Dtsl - voltage fluctuation max.+/-5 %

Year of construction: 1999, Condition: used, machine/vehicle number: 942, - Manufacturer Fladder - Type Gyro 300 VAC Ex - Working width 1300 mm - Year of manufacture 1999 - Number of brush heads 6 pcs. - Rotating and oscillating grinding unit - 2 vacuum fans - Motor power 7.5 kW - With vacuum conveyor belt - Electrical connection control cabinet - Feed continuously adjustable 2 - 8 m/min Delipovvl H Ne T Dtskl - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Separate control cabinet, Dimensions: W: 800 mm, depth: 400 mm, height: 1700 mm - Location, in the warehouse - Volt, HZ 400 / 50