Condition: excellent (used), Year of construction: 1996, grinding width: 1,350 mm, power: 42 kW (57.10 HP), COSTA 71 CTT 1350 wide belt sanding machine, manufactured in 1996. Configuration: 1 hard rubber sanding roller. 1 pneumatic pad. Air blow-off system. Working width: 1,350 mm. Pneumatic (compressed air) cleaning system for all units. Vacuum worktable with integrated fan. Cjdpfx Agjznvp Ijrehd Construction: Designed for use in a production line with a fixed working height; the sanding units move while the workpiece remains at a constant level. 2 motors, total power: 42 kW.

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide-belt sanding machine with electronic segmented sanding shoe and finish sanding for coated surfaces. Ideal sanding machine for interior construction companies, also suitable for intermediate sanding of coated surfaces. Edge banding machine with a combination unit and electronic articulated pressure beam, with edge segments that can be switched on and off. Segment width of the pressure beam: 35 mm. Contact roller can be pneumatically adjusted, low wear due to a ribbed steel roller. Grain size compensation. Drive motor 7.5 kW with automatic motor brake, infinitely variable belt speed controlled by a frequency inverter from 2 - 18 m/s. Belt feed can be infinitely adjusted via a frequency inverter from 2.5 - 13 m/min. Pneumatic workpiece-controlled belt blowing device. Cleaning brush at the outlet. Constant working height of 900 mm by adjusting the upper part of the machine, allowing it to be integrated into sanding lines. Feed belt still has good grip and is in very good condition. Maximum sanding width approx. 1340 mm. Workpiece height approx. 3 to 150 mm. Common sanding belt dimensions 1360 x 1900 mm. 3 rubber-coated pressure rollers. Infeed roller table and fold-down outlet table. Preparation for vacuum blower. The belt is perforated, and connectors for an optional blower are available. Alternatively, the belt can also be connected to the extraction system. Extraction connection: 1 x 200 mm, 1 x 140 mm, and 2 x 100 mm. Terminal control with 50 programmable sanding programs for automated machine control. Parameters: Belt speed, feed speed, workpiece height, pressure beam engagement points at the front and rear, edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller. CE marking. Operating manual. Without the connection cable shown in the picture. Original paint, only touched up in places. Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150 mm (L x W x H). Weight approx. 2400 kg. Cedpfx Agjzqvmrorehd The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration and are in stock, see "other offers from this seller".

Condition: excellent (used), Year of construction: 2002, CASADEI wide belt sanding machine Model: Libra 2RTC110 Year of manufacture: 2002 Sanding width: 1100 mm Working height: 3-160 mm Sanding belt width: 1120 mm Chsdj Ahxzuepfx Agrsd Sanding belt length: 2200 mm

Condition: used, Year of construction: 1995, Frame grinding machine LÖWER Type LZ 1 Working width 280 mm Working height 120 mm Chjdpfxjzynpke Agrsd Arbor diameter 35 mm Table length 1100 mm

Condition: used, Year of construction: 2021, Oil Application Machine LW100.6/300 Two-Roller Machine – Roller width: 300 mm, material passage up to 80 mm. Oil application on top and bottom. Adjustable feed speed approx. 6–35 m/min. Motor 0.37 kW, 400 Volt, 50 Hz. CE certificate. Machine table working height 900 mm, powder-coated. Additional safety hood with adjustable pass-through thickness, with plexiglass insert. Non-driven roller conveyor 1300 mm, working height 900 mm, height adjustable. Storage location: Nattheim. Csdpfxexy Tmuj Agrshd

Condition: like new (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 2013.11.293, overall weight: 8,000 kg, HEESEMANN MFA IMPRESSION 2013 WIDE BELT SANDER – JBS Industrial wide belt sander HEESEMANN MFA Impression from 2013, manufactured in Germany. The machine is designed for sanding wood surfaces and wood-based materials. It is a solution for carpentry workshops, furniture manufacturers, door manufacturers, and manufacturers of finishing elements. Through-feed material transport and roller tables on the infeed and outfeed sides facilitate the handling of large parts. The operator panel with a screen enables control of the machine's operation, and side doors provide access to the sanding units. TECHNICAL DATA: – brand: HEESEMANN, – model: MFA Impression, – manufacturer: Karl Heesemann Maschinenfabrik GmbH & Co. KG, – year of manufacture: 2013, – country of manufacture: Germany, – machine number: 2013.11.293, – operating voltage: 400 V, – frequency: 50 Hz, Codpfx Agoz Rnugjrjhd – total power according to the nameplate: 97 kW, – rated current: 205 A, – control voltage: 24 V DC / 230 V AC, – total weight: 8000 kg, – CE marking. EQUIPMENT: – operator panel with screen, – belt conveyor, – infeed roller table, – outfeed roller table, – sanding units with separate drives, – CSD pressure system marking, – connections for dust extraction system, – pneumatic elements with a pressure gauge, – emergency stop buttons, – side access doors to the units. Transportation to the specified address can be arranged for an additional fee. Please contact us for more information. We invite you to contact us and view our other listings. WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: excellent (used), SCM sandya 3s 950mm WIDE BELT SANDER Sanding width: 950 MM 1 calibrating unit with a metal roller 2 combination unit with a rubber roller and sanding pad Cjdpfs Afunhex Agrjhd The sanding pad has an oscillating motion One motor for 2 units - 7.5 kW Oscillation controlled by photoelectric cells 2 feed speeds Electric table adjustment Table position display Thickness gauge Very good condition, inspected, ready for operation

Condition: like new (used), Year of construction: 2021, functionality: fully functional, (ROLLER/PADDING, 1350mm) Technical specifications of the machine: Max. working width 1350mm, min./max. working height 3/160mm, number of sanding belts 2, length of sanding belts 2620mm, hardness of the first roller 90 SH, diameter of the first roller 180 mm, diameter of the second roller 180 mm, padding, speed of sanding belts 18m/s, feed speed 4-20 m/min via inverter, power of the feed motor 0.75HP, power of the motor for lifting the worktable 0.33HP, diameter of extraction openings 160mm (2 x) + 2 x 80mm, working pressure 6 bar, CE safety standard, front and rear roller track with two rollers. Machine with standard equipment and included accessories: - power of the main motor 20HP - automatic star/delta start Chjdpfjz Nwtcox Agrjd - self-braking motor - automatic positioning of the worktable according to the thickness of the workpiece with stock removal adjustment - electronic digital display of the set working height - automatic centering of the feed belt - pneumatic shutdown of the roller from the front of the machine MACHINE IS SUITABLE FOR: - calibrating and sanding solid wood and chipboard (first roller + second roller) - sanding veneer (padding) - sanding lacquered surfaces (segmental padding) Electronic controller with a 12'' color touchscreen Unit with a brush at the outlet for wood structuring (Tynex G60 brush) - motor power 4HP (3kW) Segmental electronic padding 1350mm 48 segments Increased power of the main motor to 25 HP Additional motor with a power of 20 HP Grit-set system for adjusting the roller height according to the paper grit (2x) Vacuum table

Condition: excellent (used), CATALOGUE NUMBER 7773 TECHNICAL SPECIFICATIONS - max. width of workpiece: 900mm - max. height of workpiece: 160mm – Top: - metal, sliding roller I unit – ribbed rubber roller for calibrating II unit – 2x metal roller for calibrating + shoe – Bottom: - conveyor belt - pneumatic belt oscillation - electric table lifting - main motor: 15kW/11kW - feed motor: 1.5kW Chedsztw D Djpfx Agrod - working pressure: 6-8bar - diameter of extraction nozzle: 2x200mm - dimensions (L/W/H): 1850x1950x2040mm - weight: approx. 3000kg ADVANTAGES – Made in Italy – Calibrating grinder + shoe – Used grinder, very good condition Net price: 13900 PLN Net price: 3230 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, Year of construction: 1999, Number of grinding stations: 1 Maximum workpiece cross-section: 390 x 390 mm Grinding belt dimensions: 400 x 1800 mm Length: 1150 mm Width: 1120 mm Weight: approx. 1020 kg Dust extraction connection diameter: 2 x 150 mm Roller conveyor: 3300 mm Cjdpszxqflofx Agrehd Location: Supplier

Condition: excellent (used), Catalog number 8036 TECHNICAL DATA max. width of the workpiece 1100 mm max. height of the workpiece 170 mm 2 units: – from above: rubber roller, pressure roller, knurled 1) metal roller, knurled, for calibrating rubber roller, pressure roller 2) rubber roller, knurled + sequential shoe + metal roller Chodpfx Aj Af Uubogrsd rubber roller, pressure roller total power of the units 15 kW – from below: 2 rubber rollers, slip conveyor belt 2 rubber rollers, slip potentiometer for grinding thickness belt blowing pneumatic belt oscillation with photoelectric sensors electric table lifting + manual (for precise adjustment) 2 types of feed speed 0.3 kW with pneumatic brake operating pressure 6-8 bar diameter of the dust extraction nozzle 2x140 mm overall dimensions L/W/H 1840x1650x2000 mm weight 1160 kg – unpainted – made in Italy – automatic shoe – 2 units – potentiometer for grinding thickness – DTR documentation – used grinder, very good condition Net price: 48900 PLN Net price: 11372 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8032 TECHNICAL DATA Chjdpfozxg H Sjx Agrjd - max. width of workpiece 970 mm - max. height of workpiece 160 mm - 2 units - 1) grooved rubber roller - 2) two metal rollers + shoe - power of unit I and II: 11 kW - total power: 12 kW - brake * from above: - metal roller, sliding - pressure roller - unit - metal roller, sliding - pressure roller - unit - metal roller, sliding * from below: - rubber roller, sliding - conveyor belt - pneumatic belt oscillation - electric table lifting - 2 types of feed speed - feed motor approx. 0.75 kW - working pressure 8-10 bar - diameter of dust extraction nozzle 2x160 mm - overall dimensions (L/W/H) 1600x1500x2000 mm - weight 1370 kg ADVANTAGES – Made in Italy – 2 units – Unpainted – Used grinder, very good condition Net price: 21900 PLN Net price: 5090 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: used, Second-hand Bütfering Optimat SWT 124 RC wide-belt sander for calibrating and sanding solid wood, veneer and varnish. Technical data: - Unit 1: Calibration unit, 15 kW - Unit 2: Combination unit, 11 kW - Working width: 1,100 mm Cedj Ahgkdjpfx Agrohd - Workpiece height: 3–160 mm - Weight: ~ 1,800 kg

Condition: used, Year of construction: 1986, Max. working width: 1300 mm Number of belts: 3-belt 1st unit: Shoe unit 1st roller diameter: 100 1st unit design: steel roller/shoe 2nd unit: roller/shoe 2nd roller diameter: 100 2nd unit design: steel roller 3rd unit: roller/shoe 3rd roller diameter: 100 mm 3rd roller design: grooved steel roller 3rd unit sanding shoe: electronic individual elements Cleaning brushes: Yes Paint sanding possible: Yes Belt blow-off: Yes Vacuum carpet: Yes Codpovvki Nefx Agrshd Storage location: Nattheim

Condition: ready for operation (used), functionality: fully functional, working width 950 mm calibrating unit with metallic roller Cedpfxozz Nkrs Agrjhd combination unit with rubber roller and automatically engaged shoe star-delta start pneumatic oscillation controlled by photocells two conveyor feed speeds motor power 11 kW year of manufacture 2000 power supply 400V weight 975 kg

Condition: excellent (used), Year of construction: 1999, Double-sided multi-purpose edge sanding machine with oscillation and 200mm sanding height. Langzauner LZK 4-S with veneer edge sanding side and solid wood sanding side. 200mm sanding width. Motorized sanding belt oscillation, therefore no compressed air connection required. Drive motor 400V / 3kW. Front work table for sanding veneer edges with grooved stop guide (for veneer overhang). Veneer sanding attachment with fine adjustment, foldable. Spring-loaded table, height adjustable and can be positioned laterally. Angle stop. Rear, inclinable work table for sanding solid wood. Both tables are height adjustable to utilize the sanding belt. Belt dimensions 3000 x 200mm. Side extension table for radius sanding on the 150mm belt roller. Feed stand holder 68mm. Codpfx Asz I T Apjgrjhd Central dust extraction connection 140mm. Very stable chassis, 2 swivel casters, 2 steering casters and lever brake for locking. CE marking. All graphite pads and dust extraction hoses have been replaced. Original paint, only touched up in places. Excellent condition from a small restoration workshop. Some sanding belts are included. Dimensions approx. 1800 x 1000 x 1250mm (L x W x H). Weight approx. 650kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this seller".

Condition: good (used), Year of construction: 2017, Deburring/grinding machine from Costa Type MD4 VC 1150 Belt width 1150 mm Vacuum table For grinding and minimal edge rounding Chsdpfo Aayf Usx Agrod Equipped with an AL-KO dust extraction system (excluding filters)

Condition: excellent (used), functionality: fully functional, working width 1350 mm, calibration unit with metal roller, combination unit with two rubber rollers and multi-segment pad, oscillation by photocells, machine function activation from control panel, belt blow-off, stepless feed speed regulation for sanding belt on 2nd unit, pneumatically controlled multi-segment pad with adjustment, year of manufacture 2007, electric table adjustment, material thickness gauge, vacuum under-table. Chjdpfxezz Nmms Agrjd

Condition: excellent (used), CATALOGUE NUMBER: 6985 TECHNICAL DATA - Maximum width of the workpiece: 300mm - Height of the workpiece: 200mm - Unit: grooved rubber roller + shoe + metal roller - Work table: 1230x440mm - Belt: 300x1900mm Top: - Slip roller, rubber - Unit approximately 7.5kW - Slip roller, rubber Bottom: - Pulling belt - Pneumatic oscillation - 2 feed speed settings - Feed motor: 0.85kW - Diameter of dust extraction port: 110mm - Dimensions (L/W/H): 1250/1000/1950mm - Weight: 530kg Csdpszw Dvbjfx Agrshd - Unpainted - Used grinder - Very good condition Net price: 13900 PLN Net price: 3230 EUR Net price calculated using an exchange rate of 4.3 PLN/EUR (Prices may be subject to change in the event of significant exchange rate fluctuations)

Condition: used, Year of construction: 1991, functionality: fully functional, working width: 1,100 mm, grinding width: 1,100 mm, overall weight: 3,400 kg, height adjustment type: electric, OTT Omega 1100 (year of manufacture 1991) Cedez Dpxljpfx Agrohd Dimensions and weight: Footprint / installation dimensions (L x W x H): approx. 2700 x 2100 x 2200 mm Weight: approx. 3400 kg Extraction: 3 extraction ports

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Total power 14 kW First calibrating unit with steel roller Second combination unit with rubber roller Working width 950 mm Two carpet feed speeds Electric table height adjustment Shoe with adjustable activation time Oscillation with photocells CE marking Year of manufacture 2007 Cedjzx T Rdopfx Agrohd

Condition: excellent (used), functionality: fully functional, Working width: 900mm Steel calibrating roller Combination unit with a rubber roller Motor power: 11kW Pneumatic shoe adjustment Pneumatic oscillation with a photocell Element thickness gauge Electric table adjustment Star/Delta start-up Cjdpszxp Npsfx Agrjhd Power supply: 380V

Condition: used, Year of construction: 1979, functionality: fully functional, working width: 1,100 mm, working height: 160 mm, type of input current: three-phase, input voltage: 380 V, OTT RS-O 110 Wide-Belt Calibrating and Sanding Machine Used industrial wide-belt sanding machine manufactured by OTT. The machine is equipped with two sanding units and is suitable for calibrating, pre-sanding, and fine sanding solid wood, furniture components, and panel materials. Technical specifications: Chjdpoz Dxkdefx Agred Manufacturer: OTT Model: RS-O 110 Year of manufacture: 1979 Machine number: 354 Maximum working width: 1,100 mm Maximum workpiece height: 160 mm Number of sanding units: 2 Total installed power: 30 kW Power supply: 380 V Feed speeds: 2 Operating pressure: 8–10 bar Dust extraction connections: 2 × Ø 200 mm Approximate dimensions: 2,230 × 2,020 × 2,050 mm Approximate weight: 3,000 kg Machine configuration: Grooved rubber calibration roller Pneumatic sanding pad with metal rollers Pneumatic sanding-belt oscillation with photocell control Electrically adjustable working table Integrated cleaning brush Industrial heavy-duty construction The machine is offered in used condition. Its actual condition, equipment, control panel, and internal components are shown in the photographs. Inspection is possible by prior appointment. Location: Gātciems, Latvia Loading assistance can be provided. European transport can be arranged upon request. Price: EUR 2000 net, excluding VAT.

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Cjdpfx Agovvkipsrohd

Condition: good (used), - Used machine - Passage width: 1100 mm - Passage height: 3 - 160 mm - 1st unit: Contact roller - 2nd unit: Grinding shoe - Grinding belts: 1120x1900 mm - Motor power: 15.0 kW - Feed rate: 5 - 25 m/min - LxWxH: 1910 x 1570 x 1920 mm Cedpfx Ajz Tflnjgrshd - Weight: 2500 kg - Ex works