Used roll benders (motor-driven) for 6.1 - 14mm sheet thickness for sale (141)

Condition: used, functionality: fully functional, Year of construction: 2004, machine/vehicle number: 4roll, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Davi, controller model: digital position readout, number of rollers: 4, roller (bottom) diameter: 155 mm, roller (top) diameter: 165 mm, side roll diameter: 120 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, overall weight: 2,200 kg, total length: 3,400 mm, total width: 1,150 mm, total height: 1,100 mm, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4roll 2000x6 mm plate bending machine Davi year 2004 used plate roll in working condition, Planetary hydraulic dual pre-pinch Capacity: Plate width 2000 mm plate thickness 6 mm pre-bend 5 mm minimum rolling ID 220 mm rollers length 2050 mm Upper roll D 165 mm Pinch roll D 155 mm Side rolls D 120 mm Power electric motor 3 kw on hydraulic unit Voltage 3ph 400/50 mm Installed configuration Rollers surface hardened high strength Conical plate rolling, cone bending Hydraulic control manual leverage distributors Variable working speed Digital position readout --- Hydraulic driven motorized central rolls Pre-pinch pressure adjustable pre-bend Bwedpj Ahg Aysfx Aknew Drop-end open unloading fully round shells Calibration system for welded seam re-rolling Safety and emergency stop machine dimension 3400x1150xH 1100 mm -weight 2200kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, machine/vehicle number: 4HEL, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 330 mm, roller (top) diameter: 350 mm, side roll diameter: 240 mm, sheet thickness (max.): 28 mm, sheet thickness steel (max.): 28 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 28 mm, overall weight: 11,500 kg, total length: 4,200 mm, total width: 1,950 mm, total height: 1,650 mm, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: centralized greasing system, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4 roll plate bending machine linear guideways Faccin model 4HEL capacity 2100 x 28 mm Used in perfect condition year of make 2006 Plate bending capacity Plate width 2000 mm Rolling thickness 25mm Plate prebend 20 mm smaller bending capacity ID 400 mm Rolls length 2100 mm Upper roll dia 350 mm Pinch roll dia 330 mm Siderolls dia 240 mm Bsdpfx Ako Afu Saenoww Electric motor Kw 18,5 on hydraulic unit Vac 400/50 Weight of the machine 11500 kg Layout mm 4200 x 1950 x H 1650 mm Hardened surface of the 4 rolls of the rolls high strength Driven rollers hydraulic powered with axial gear unit rotation Opening of top roll hydraulic drop-end to unload the plate being formed Variable speed working roll bending rotation hydraulic speed fast/slow up to 7 mtr/min Console electric with centralized commands joysticks and digital readout 3 axis. Digital readouts of the rolls position

Condition: good (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: SY 330 -075, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Akyapak, number of rollers: 4, roller (bottom) diameter: 300 mm, roller (top) diameter: 330 mm, overall weight: 9,100 kg, total length: 4,585 mm, total width: 1,610 mm, total height: 1,840 mm, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, The sale includes a 2-meter longitudinal welding station equipped with an Oerlikon MIG 500 A welding unit, with all equipment in full working order. Also included are a lifting table for material handling to the plate rolling machine and a work platform. The plate rolling machine is in good condition and can be put into production immediately. The machine is currently operational, and inspection and test runs can be arranged upon request. Bsdpfxozzdahe Aknsww With the inclusion of the longitudinal welding station, this package provides a complete solution for manufacturing tubes and special pipe sections to customer-specified diameters, with lengths of up to 2 meters.

Condition: used, total length: 6,500 mm, total width: 3,450 mm, total height: 3,930 mm, Year of manufacture: 2002 Colour: Green Empty weight: 94.000 kg Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2002 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 385 - Drive system: CNC - Control system brand: Swebend - Control system type: 2021 Seven X CNC - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 4 - Power [kW]: 163.0 Bedpfe Agn Svex Aknjww - Max. sheet thickness [mm]: 77 - Max. prebending thickness [mm]: 65 - Max. working width [mm]: 3000 - Top roll diameter [mm]: 700 - Bottom roll diameter [mm]: 700 - Options: Cone rolling, Plate support - Transport dimensions: 6500mm x 3450mm x 3930mm (l x w x h) - Transport weight [kg]: 94000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), functionality: fully functional, roller (bottom) diameter: 190 mm, roller (top) diameter: 200 mm, 4 - Roller-type round bending machine Manufacturer: Schäfer Model: SVRM Year of manufacture: 1990 Max. working width 2700 mm Max. sheet thickness: 7 mm, with 5 mm pre-bending capability Bwsdpfx Ao Ahkn Tjknow Upper roller: 200 mm, driven Lower rollers / side rollers: 190 mm diameter, driven, with clutch Feed: hydraulic Digital displays Control panel with digital displays

Condition: used, operating hours: 15,034 h, total length: 7,700 mm, total width: 2,300 mm, total height: 1,700 mm, Year of manufacture: 1980 Colour: Green Empty weight: 10.000 kg Price: On request - Year: 1980 - Serial number: 1500 - Operating hours: 15034 - Drive system: Conventional - Drive: Hydraulic Bwodpfx Akj Agwvxenow - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 - Power [kW]: 6.0 - Max. sheet thickness [mm]: 8 - Max. prebending thickness [mm]: 8 - Max. working width [mm]: 3000 - Top roll diameter [mm]: 300 - Bottom roll diameter [mm]: 220 - Options: Cone rolling, Plate support - Transport dimensions: 7700mm x 2300mm x 1700mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 25072, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: DELSY EASYCOM, controller model: EASYCOM 4AXIS, number of rollers: 4, roller (bottom) diameter: 140 mm, roller (top) diameter: 160 mm, side roll diameter: 120 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, overall weight: 2,900 kg, total length: 3,000 mm, total width: 1,000 mm, total height: 1,200 mm, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4 Roll plate bending machine dual initial pinch MG Italy 2000X6mm Mode CNC EASYCOM 4-AXIS NEW MACHINE serial no. 25072 Capacity: -Width of plate: 2000 mm -Thickness plate roll 6 mm -Plate pre-bend 4 mm Rolls -useful width mm. 2050 -Top roll mm. 160 - Lower roll mm. 140 Configuration installed: hardened rollers, surface smooth finishing for all kind of plates and stainless steel Prebend process in manual and automatic full rounding no-flat plate ends Conical plate rolling cones and reducers hydraulic control dual initial pinch Driven rolls rotation hydraulic powered with axial gear unit plate dragging and forming . Console electric CNC with centralized commands joysticks , 4-axis position programming and readout. CNC controller interface touch screen 15”, 4 axis teach-in programming mode, infinite memory storage for automatic plate roll. On screen digital position readout of the 4 rollers for automatic programmable control and/or manual bending use by operator. Opening hydraulic drop-end machine front for the unload of fully round bending. Bwjdpe Ahgwijfx Aknsw Variable working speed fast-slow controlled Safety installation with emergency stop. Instruction manuals for operation and service.

Condition: excellent (used), Year of construction: 2005, Technical specifications: Working length: 3100 mm Max. bending capacity: 20.0 mm Bending allowance: 15.0 mm CNC control: SIEMENS Simatic Diameter of all rollers: 350 mm Hydraulic folding bearing Control panel with digital display Bodpfxs Afby Rj Aknoww Motor power: 15 kW CE marking Dimensions (length x width x height): approx. 6900 x 2000 x 2450 mm Weight: approx. 21 tons Accessories: Bending aid at the top and on the side The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1999, sheet width 2050 mm Bedsztfxiopfx Aknsww plate thickness 4 mm total power requirement 3 kW weight of the machine ca. 2 t

Condition: used, Year of construction: 1989, Schäfer SVRM 3500/12 - CNC 4-Roller Plate Bending Machine - Siemens CNC control with joystick for roller positioning and digital display (upgraded in 2006) - Hydraulic tilting of the top roller via control panel - Rollers made of hardened material with a strength of 900 N/mm² - Year of manufacture: 1989 Technical Data - Max. sheet width: 3500 mm - Roller barrel length: 3550 mm - Max. sheet thickness (bending): 12 mm - Max. sheet thickness (pre-bending) 4xS/3xS: 8 / 6 mm - Max. yield limit of sheets at 20% cold work hardening: 380 N/mm² - Top & bottom roller diameter: 360 mm - Side roller diameter: 290 mm - Smallest achievable bending radius: 220 mm - Feed speed, bottom roller: 200 mm/min - Feed speed, side rollers: 700 mm/min Bwodjylyh Depfx Aknew - Total installed power: 22 kW - Electrical system: 380 V / 50 Hz / 3 Ph - Space requirements including control, hydraulics & roller conveyor (WxHxD): approx. 7900 x 3300 x 4600 mm - Pit depth: 900 mm - Machine weight: 21,100 kg

Condition: used, total length: 5,810 mm, total width: 1,980 mm, total height: 1,540 mm, Year of manufacture: 2007 Colour: Blue Empty weight: 11.500 kg Price: On request - Year: 2007 - Documentation available: Yes - CE marking present: Yes - Serial number: 600007090 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 - Power [kW]: 15.0 - Max. sheet thickness [mm]: 13 - Max. prebending thickness [mm]: 10 Bwedpfjzw A Suox Aknew - Max. working width [mm]: 3100 - Top roll diameter [mm]: 280 - Bottom roll diameter [mm]: 280 - Bending speed [mm/min]: 5000 - Options: Cone rolling, Digital readout - Transport dimensions: 5815mm x 1985mm x 1540mm (l x w x h) - Transport weight [kg]: 11500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2003, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm Bodpfxsz N Hxho Aknjww side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg range L-W-H 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit "ELAP LYNX" * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting - Side roll parallelism maintained via torsion shafts - Pre-bending on both ends - Diameters up to 1.1 times the top roll diameter are possible - Forged and hardened rolls (hardness: 53–55 HRC) - Low-maintenance, robust machine design - Permanent lubrication for all bearings - Sturdy welded steel construction - Selectable bending speeds (2 settings) - Electro-hydraulic drop-end bearing for easy removal of rolled parts - Pressure gauge/display for rolls - Safety system (safety trip wire with switch unit) - Operating manual (PDF)

Condition: good (used), functionality: fully functional, Year of construction: 2011, Biko 3128 – Plate Rolling Machine (2011) High-quality 3-roll plate bending machine for professional metal fabrication. Well maintained and ready for work. Technical Specifications Model: Biko 3128 Year of manufacture: 2011 Rolling type: 3-roll, initial pinch Max. plate width: 3100 mm Max. bending capacity: 28 mm (depending on material grade) Top roll diameter: To be confirmed Side roll diameter: To be confirmed Motor power: To be confirmed Control system: Hydraulic, with adjustable side rolls Cone bending capability: Yes Machine construction: Heavy-duty welded frame Safety: Emergency stop & foot pedal control Condition Machine is in very good working condition Regular service history Test run possible Included Foot pedal Hydraulic adjustments Dimensions & Weight Bwsdpfsx Dx Hzjx Aknew (Confirm exact values with seller) Length: 5.0 m Width: 1.8 m Height: 1.6 m Weight: 12,000 kg

Condition: good (used), Year of construction: 1989, sheet width 2050 mm plate thickness 8.0 mm pre-bending capacity 6.0 mm upper roll diameter 190 mm lower roll diameter 180 mm bending speed 5.2 m/min work height max. ca. 980 mm total power requirement 5.5 kW weight of the machine ca. 3500 kg. range L-W-H 2900 x 1200 x 1280 mm Furnishing: Bodpfx Akjz Dkzhjnjww - Robust electro-hydraulic 3-roller bending machine - planetary movement of the bending rollers with reduced center distance - Hydraulic motors combined with planetary gears * for driving the 3 rollers - mobile operating unit, with connection cable + plug - extended roll ends for profile bending rolls - with conical bending device * Inclination of the side rollers by handwheels * Workpiece limitation for a cone with a 45° pitch: * Working length max: 60% * Bending capacity max: 50% - free-moving operation * electric delivery rollers * electric turning/rolling movement * digital position display of the reels - hardened rollers SAE 1050 CK 45 - Hydraulic folding store for removing closed pipes - safety device (cable) - Original instruction manual + CE declaration * Machine link : ?machineno=1008-9401255

Condition: good (used), functionality: fully functional, Year of construction: 1998, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Simatic OP7, number of rollers: 4, roller (bottom) diameter: 470 mm, roller (top) diameter: 530 mm, side roll diameter: 400 mm, roller diameter: 530 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 2,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 65 mm, sheet thickness stainless steel (max.): 50 mm, overall weight: 40,000 kg, total length: 6,000 mm, total width: 2,900 mm, total height: 2,900 mm, power: 55 kW (74.78 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, plate bending roll capacity 3000x50 mm Davi modelMCB3053 Hydraulic 4 roll plate bending machine, year 1998 plate width 3000 mm thickness rolling 50 mm pre-bending 40 mm width on the rolls 3100 mm upper roll size 530 mm lower roll 470 mm Bodpfxoy D Ngzo Akneww side rolls 400 mm Power electric 70Hp on hydraulic unit voltage 380/50 - Installed configuration Hardened surface of the 4 rolls conical bending attachment – hardened cone bending Console electric with digital position readout of the rolls Controller Siemens Simatic OP7 NC programmer for automatic rolling Hydraulic power driven the central rolls with axial gearbox Pre-pinch pressure adjustable plate edge pre-bend. Drop-end open front for unloading closed shells Rerolling system for calibration roundness of welded shells. Safety and emergency system installed. Manuals original for operation and maintenance Dimension 6000x2900 x h 2900 mm weight 40000 kg

Condition: used, total length: 4,700 mm, total width: 1,200 mm, total height: 1,400 mm, Year of manufacture: 1991 Bodpfx Akez Euawsnsww Colour: Green Empty weight: 7.500 kg Price: On request - Year: 1991 - Documentation available: No - CE certificate present: No - Serial number: 914931 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 5.5 - Max. sheet thickness [mm]: 14 - Max. prebending thickness [mm]: 6 - Max. working width [mm]: 3000 - Top roll diameter [mm]: 255 - Bottom roll diameter [mm]: 255 - Options: Cone rolling - Transport dimensions: 4700mm x 1200mm x 1400mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: 9730010, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 340 mm, side roll diameter: 300 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 25 mm, sheet thickness copper (max.): 25 mm, overall weight: 9,000 kg, total length: 5,500 mm, total width: 1,600 mm, total height: 1,500 mm, input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 3-roll hydraulic plate bending machine with pre-pinch Model MCO3034 Davi capacity 3000x20 mm -Plate width 3000 mm -Capacity rolling 20 mm -Prebend 16 mm ----- TECHNICAL DATA Top roll 340 mm Surface on the rolls 3050 mm MINIMUM ROLLING DIAMETER ID 430 MM depending on plate thickness and plate yield strength CONFIGURATION: -Rolls hardened high strength surface -Conical plate bending attachment hydraulic -Digital position readouts 2xplate support left and right side hydraulic ( see photo ) Bsdezwuu Ujpfx Akneww -3 rolls driven hydraulic powered with individual motor & gear box on each roll. -Parallelism between top and bottom rollers by torsion bar. -Rolls installed on bearings -Overload safety hydraulic protection of the rolls -Synchronized speed hydraulic rotation of the rolls. -Hydraulic unit self enclosed into the machine. -Speed infinitely variable control with leverage hydraulic distributor -Centralized operator control panel hinged on the front floating left right -Emergency shutdown and safety stop system -Manuals original

Condition: used, Year of construction: 2017, controller model: NEXUS, _____ Bodszuikxopfx Aknoww Description: Year of manuf. : 2017 Material thickness : 14 mm Technical data Working length:3,100 mm Bending capacity / Folding capacity:14 / 12 mm Upper roll diameter:290 mm Lower roll diameter:270 mm Side roll diameter:210 mm Main motor power:7.5 kW Machine length:4,475 mm Machine width:1,460 mm Machine height:1,520 mm Machine weight:8,000 kg Control system:NEXUS TouchScreen DNC equipment :- NEXUS DNC control system with touchscreen interface :Programming and operation options: :1. Manual mode – all movements controlled via joystick :2. Teach-in mode – saving of positions :3. Input of values for the rollers via the screen :Storage capacity for 300 programmes : :- Rollers made from C45 alloy steel, induction-hardened :to 50–55 HRC : :- Conical bending unit with both :side rollers set at an angle, lower roller set at an angle and :bearing with hardened guide roller : :- Calibration unit for re-rounding :welded tubes : :- Brake for the upper roller for greater precision when :positioning the material.

Condition: excellent (used), Year of construction: 2017, Technical specifications: Bwjdszfvvvjpfx Aknow Working width: 6500 mm Max. bending capacity: 4.0 mm Max. bending allowance: 3.0 mm CNC control Diameter of top roller: 420 mm Diameter of side rollers: 300 mm Diameter of center bottom roller: 400 mm Conical bending unit through angled positioning of the two side rollers Mobile control panel with digital display Hydraulic folding bearings CE marking Motor power: 22 kW Dimensions (length x width x height): approx. 9200 x 2350 x 1900 mm Weight: approx. 29 tons Optional equipment: Second top roller diameter: 350 mm Side bending aid Condition: Very good condition, little used.

Condition: new, sheet thickness (max.): 9 mm, sheet thickness steel (max.): 9 mm, number of digital displays: 3, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, - Rolling capacity: 1070 x 9 mm - Pre-bending capacity: 1070 x 8 mm - Electrically adjustable rear roller - Electrically adjustable lower roller (material clamping) - Digital position indicator for the rear roller - Digital position indicator for the lower roller (material clamping) - Hardened rollers - Conical rollers Bedpfx Ae Aarg Dsknjww - Swiveling top roller - Central lubrication system - Brake motor - Emergency stop switch - Documentation - 400V

Condition: used, roller (top) diameter: 160 mm, working width: 1,050 mm, sheet thickness (max.): 10 mm, Epart Motorized Cylinder 1050 x 10 mm Brand: Epart Type: Motorized Capacity: 1050mm x 10mm Upper roller diameter: 160mm Motorized rear roller Bwsdpfovlxyzjx Aknjw Roller extension to mount rollers Pedal operated Perimeter security by limit switch Front roller separation by steering wheel

Condition: good (used), Year of construction: 2008, Technical Data: Bsdex Nntkspfx Akneww Working width: 1030 mm Max. bending capacity for mild steel St40: 10.0 mm Upper roller diameter: 170 mm Number of driven rollers: 2 Electric drive Mobile control panel Manual swing-out of the upper roller CE marking Motor power: 5.5 kW Dimensions (L x W x H): approx. 2700 x 1200 x 1300 mm Net weight: approx. 2.8 tons The seller accepts no liability for typing or data transmission errors. The machine is in condition in line with its age in terms of appearance, technology, and wear; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. Bwjdpfx Ajxacdvjknjw oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: excellent (used), Technical specifications: Retrofit in 2026 Working length: 2550 mm Max. bending capacity: 6.0 mm Bending allowance: 4.0 mm Bodpfxezbcwme Aknoww Diameter of upper roller: 200 mm Diameter of lower roller: 180 mm Hydraulic folding bearing Taper bending device Control panel with digital display Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1150 x 1250 mm Weight: approx. 4.5 tons Condition: Very good, retrofit in 2026 The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, total length: 4,100 mm, total width: 1,400 mm, total height: 130 mm, Colour: Grey Bwedoz Avg Nopfx Aknsw Empty weight: 3.000 kg Price: On request - Drive system: Conventional - Drive: Mechanical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 2 - Max. sheet thickness [mm]: 8 - Max. working width [mm]: 2540 - Top roll diameter [mm]: 220 - Bottom roll diameter [mm]: 220 - Transport dimensions: 4100mm x 1400mm x 135mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum