Used roller levellers for sale (50)

Condition: excellent (used), Year of construction: 1990, number of straightening rollers: 23, roller diameter: 80 mm, Number off straightening rolls 23 units Roll diameter 80 mm Minimum thickess 0,5 mm Maximum thickness 12 mm Digital readout system position rolls Fine adjustment down feed   Rolling width: 1450mm Rolling thickness 3x toproll Ø:12mm Rolling thickness 5x toproll Ø:16mm Top Roll Ø: 80mm Bottom Roll Ø: 80mm Number of rolls: 23 Rolling speed: 3,75 - 15 M/Min Adjustiment lower roll: 26mm/min. Power: 30kW Length: 3000mm Hjdpfx Ajxyhhaoh Njng Width: 4000mm Height: 2400mm Weight: 28000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder Hedjin Rn Aepfx Ah Neng -Wire straightening machine: decoiler-straightener combination -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg

Condition: new, Year of construction: 2025, material width 100 mm material thickness 15 mm no. of straightening rolls 9 straightening feed 7 m/min total power requirement 0,75 kW weight of the machine ca. 380 kg dimensions of the machine ca. 710 x 920 x 1360 mm Features: Hnedpeurni Uofx Ah Neg - 5x driven lower rollers - 4x adjustable upper rollers - Max. cross-section approx. 800 mm² - Mobile use on casters - Operating instructions

Condition: used, Year of construction: 1991, functionality: fully functional, Ref. No.: Lg 35425 Strip Straightening Machine Dreher 1676 BV Used, in good condition Year of manufacture: 1991 Technical Data Passage width: max. 300 mm Material thickness: 0.8 to 4.0 mm Max. material cross-section: approx. 800 mm² Number of feed rollers: 2 Hodpfsxn Tqpsx Ah Nong Feed roller diameter: 80 mm Feed roller release: pneumatic Number of straightening rollers: 7 Straightening roller diameter: 80 mm Adjustment of the upper straightening rollers: individually by hand Number of exit rollers: 2 Exit roller diameter: 80 mm Exit roller release: manual Strip speed: approx. 0 to 30 m/min Strip edge guide vertically at the inlet, centrally adjustable. Roller basket at the outlet for strip guidance. Working direction: from right to left. Speed steplessly adjustable via variable speed motor (manual). Loop control via spring switch (start-stop).

Condition: used, Technical details: sheet width: 250 mm plate thickness: 2 mm number of rolls: 11 straightening feed: 5...30 m/min infeed height: 1250 mm total power requirement: 4,0 kW weight of the machine ca.: 620 kg dimensions of machine: 1,15x1,02x1,5 mm dimensions electric cabinet LxWxH: 0,66x0,53x0,32 m Band Leveling Machine with feed Hnedpfxou Ic Ewo Ah Njg equipment: - sideways band guidance rolls model: - band intake height horizontal:1250mm - tiltable: positiv 30°; negativ 15° *

Condition: used, Year of construction: 1987, tube Ø: 10 - 50 mm wall thickness: 1 - 6 mm Hnodpfx Ajg I Di Eeh Neg reference material (tensile strength): 400 N/mm² speed: approx. 120 m/min

Condition: ready for operation (used), Year of construction: 1998, Pressing force: 5000kN, max. operating pressure: 500bar, portal clearance: 2600mm, opening height: 470mm, max. straightening ram stroke: 500mm, min. edge distance: 375mm, rapid traverse: 450mm/min, straightening speed: 45mm/min, return speed: 1100mm/min, feed rate: 12m/min, max. feed force: 5000kN, table height: 1000mm. Machine dimensions X/Y/Z: approx. 4600mm/3250mm/3250mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible. Hjdpfx Ahoxlit Ie Nsng

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, number of straightening rollers: 9, product height (max.): 3 mm, straightening roller diameter: 30 mm, working width: 400 mm, coil inner diameter: 360 mm, coil outer diameter: 1,700 mm, workpiece weight (max.): 2,000 kg, Straightening machine with double decoiler and loop Hnedsxiyx Nopfx Ah Njg

Condition: ready for operation (used), functionality: fully functional, Sheet straightening machine, 2100 mm,Sheet Metal Straightening, Plate Leveler Machine 2100 mm Used machine Hedpfx Ajv Tpv Njh Nong Maximum Sheet Width: 2100 mm (2100x8 mm) Maximum Sheet Thickness: 10 mm (1500x10 mm) Number of Rolls: 11 pcs Roll Diameter: 95 mm Electric Motor: Adjustable speed and direction Electrical Data: 400 V, 50 Hz, 36 A, 22.5 kW Includes a roller conveyor.

Condition: good (used), All information without guarantee. A demonstration is at any time possible in our showroom. Hnjdjfd R Ahepfx Ah Neg

Condition: used, Technical details: material width: 200 mm material thickness: 1,5 mm Number of Straightening rolls: 5x oben/upper/arriba Hnsdpsu Ic D Tefx Ah Nsg no. of rolls: 6x unten/ lower/abajo throughput speed: nicht bekannt/ unknown/desconocido m/min current: 220/50 A/Hz total power requirement: 1,5 kW weight of the machine ca.: 0,447 t space requirements of the machine approx.: L:0,88xB:0,76xH:1,26 m description: machine does have 11 rolls upper roll: width: 210mm, dia. approx. 60mm, driven adjustable lower roll: width: 210mm, dia. approx.60mm, driven, not adjustable *

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m bundle weight: max. 3.000 kg bundle Ø: max. 600 mm working direction: left → right The shop consists of: • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE • tube bundle destacker III with separation MAIR Hnedpfemqkt Tsx Ah Nog • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics

Condition: used, Year of construction: 2001, material width 400 mm material thickness 0,7 - 4,2 mm no. of straightening rolls 7 straightening roll diameter 80 mm number of draw-in rolls 2 + 2 diameter of draw-in rolls 80 mm speed 18 m/min power capacity 2,5 kW weight 0,8 t Dimensions (WxDxH) 1,0 x 1,3 x 1,5 m with motor driven, with coil loop control via contact plate, roll adjustment separately manual Hnedpfxjvzxqfe Ah Nsg

Condition: ready for operation (used), (Merk is oorspronkelijk Georg Fischer, overgenomen door Hämmerle AG) Compacte machine van Zwitserse makelij die gebruikmaakt van een automatisch nivelleringsdruksysteem om onderdelen recht te zetten en spanningsvrij te maken. Toepassingen: fijngestanste onderdelen - koppelingsplaten - remschijven - zaagbladen - vliegtuigonderdelen - laser- en plasmagesneden onderdelen - vlakmaken van onderdelen vooraf aan robotlassen/-slijpen. - voorkomen doorbuiging met 19 teruglopende rollen - 11 tegenrollen in onderste positie - 10 tegenrollen in overwegend positie - boven- en onderrollen zijn voorzien van hydraulische motoraandrijvingen - overbelastingsventielen voorkomen schade aan de machinedeur, overbelasting of verkeerde instelling - snelle insteltijd, vereist invoer van 3 parameters (ingangsspleet - uitgangsspleet - invoersnelheid) - snelheid van de machine: 2-20 m/min maximale breedte: 750 mm maximale dikte: 12 mm min. onderdeellengte: 100 mm vermogen: 31kW totaalgewicht: 10 ton Hnodpjv Rwcrefx Ah Neg

Condition: good (used), Year of construction: 1991, functionality: fully functional, number of straightening rollers: 9, total length: 1,550 mm, straightening roller diameter: 30 mm, total height: 1,820 mm, total width: 2,500 mm, sheet thickness (max.): 2 mm, Kohler straightening unit 30.180 / 9-300.1 consisting of: Straightening machine KRM 30.180 / 9 Hnjdswrx R Sjpfx Ah Nog Uncoiling reel 300.1 Strip guide

Condition: excellent (used), roller leveller ARKU RM 1825 with 250 x 2/5 mm, 19 rolls diam. of the rolls 18 mm Hjdpfjwrnpkox Ah Njng

Condition: used, Technical details: Hsdpfx Aju Ic E Roh Neng band width: 80 mm plate thickness: 1,5 mm number of rolls: 5 total power requirement: 1,2 kW weight of the machine ca.: 150 t space requirements approx. LxWxH: 1,1 x 0,7 x 1,4 m straightening rolls: - 2 upper rolls, 3 lower rolls - material feed is performed via two compressed air controlled rolls - compressed air connection is not mounted i.D. *

Condition: used, material width:140 mm Hnjdpfxocxxquj Ah Neg dimensions of the machine ca.:1,30 x 0,78 x 0,70 m

Condition: used, material width 250 mm material thickness 0,5 - 4,0 mm no. of straightening rolls 9 Hjdpfx Ahevzxn Rs Nsng straightening roll diameter 60 mm number of draw-in rolls 2 power requirement 3,8 kW Weight 0,8 t Dimensions (WxDxH) 1,6 x 0,8 x 1,5 m with infinitely variable drive

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, number of straightening rollers: 23, product height (max.): 7 mm, straightening roller diameter: 30 mm, product width (max.): 630 mm, TECHNICAL DETAILS Material width: 630 mm Material thickness: max. 7.00 mm Sheet thickness: min. 0.30 mm Workpiece dimensions: min. 50 mm Leveling unit Number of leveling rollers: 23 Leveling roller diameter: approx. 30 mm Frame clearance: approx. 650 mm Max. vertical roller spacing: 7.50 mm Performance and speed Speed: 10 m/min Total power requirement: 5.50 kW Main drive motor: 4 kW MACHINE DETAILS Machine weight: approx. 6.00 t Hnedpfxswa Tzne Ah Neg Space requirement: approx. 2.65 × 1.80 × 1.50 m EQUIPMENT - Infeed with conveyor belt, speed-regulating - Hydraulic roller mill ventilation - Automatic Oil lubrication of transmissions and drive shafts - Digital measuring device for monitoring

Condition: used, Year of construction: 1985, machine/vehicle number: 30522, sheet width:120 mm Hjdpscxxq Ssfx Ah Nsng coil weight:75 kg dimensions of the machine ca.:2,50 x 1,25 x 1,50 m

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm straightening roll diameter:40 mm :5 :2+2 sheet thickness - min.:0,4 mm sheet thickness - max.:3,5 mm weight:0,4 t dimensions of the machine ca.:0,6x0,65x1,15 m Hnedpscxxx Rjfx Ah Nsg with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm control, very good condition

Condition: used, Year of construction: 1977, material width:300 mm no. of straightening rolls:13+2+2 Hsdpfxocxxn Ie Ah Njng straightening roll diameter:60 mm

Condition: used, Year of construction: 1973, machine/vehicle number: 740048, material width:600 mm material thickness:max. 6 mm no. of straightening rolls:23 straightening roll diameter:30 mm bending speed:10 m/min connected load:4,5 kVA Hjdpscxxytefx Ah Nsng dimensions of the machine ca.:1,00 x 1,80 x 1,60 m weight of the machine ca.:2,45 t precision double-roller machine, motorised push-button roller adjustment (divided front/back), forward / reverse roller drive control, manual central lubrication, 2 precision straightening roller-positioning gauges

Condition: used, Year of construction: 1996, machine/vehicle number: 90.293/1, material width:75 mm total power requirement:1,5 kW dimensions of the machine ca.:1,90 x 1,15 x 1,25 m Hnjdpfscxxpnox Ah Nog