Roller leveller

BAD SALZUNGEN MAR 125/2

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm Iiedpfecxxx Rex Abnef straightening roll diameter:40 mm :5 :2+2 sheet thickness - min.:0,4 mm sheet thickness - max.:3,5 mm weight:0,4 t dimensions of the machine ca.:0,6x0,65x1,15 m with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm control, very good condition

Condition: used, material width 300 mm coil weight 3 t material thickness 2 - 4 mm Straightener, 7 rolls, Make. Schleicher, Type RM 6-95/160 - band width 300 mm - band thickness 2 – 4 mm - cross cut 1200 mm² - voltage 220/380 V 50 Hz - total power requirement 3,1 kW coiler with press roll, Make Schleicher, Type H-3 - Coil weight 3 t Iiodpfxscdrmmj Abnef - Band width 400 mm - voltage 220/380 V 50 Hz - total power requirement 3,92 kW without control

Year of construction: 2016, condition: ready for operation (used), The Coiltech Decoiler Straightener Feeder System is a compact press feeding system. Belt width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler tonnage: 6000kg, diameter (inner), min-max: 470-520mm. Connected load: 7.5kW, with documentation. Iiedji El Ucspfx Abnsf

Year of construction: 2011, condition: excellent (used), Cloos welding robot Qirox QRC 320 incl. control system V 6, stand base for vertical arrangement, Cloos welding machine Quinto II 603 (600 A), wire feeder, welding torch, torch hose package, mechanical cleaning, pressure amplifier 1 tilting and rotating table WPK 5000, load capacity 500 kg, 1 start pre-selection, 1 control unit for customer-supplied sliding door Gas nozzle sensor, arc seam tracking, point editor System will be completely overhauled and serviced before delivery. Ijdpfx Abeizwv Nenjif A second station with another identical tilting and rotating table is possible.

Condition: used, 72″ x .187″ x 50,000Lb Paxson Loop Slitting Line Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Material Width: .010″ – .187″ Coil Weight: 50,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Ijdpfx Aboihf Ufsneif Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Material: CR, HR, Galvanized Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion Sliding Base Hydraulic Peeling Table Driven Pinch Rolls

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. Iiedpfx Abswrm Dtenef The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: used, sheet width 250 mm Iisdpfx Absfn Aqmjnjf coil outside dia. 1400 mm weight max. in kg 2500 kg plate thickness 2 ... 4 mm straightening feed 2,5 ... 15 m/min coiler: expanding range mm total power requirement 1 + 4 kW weight of the machine ca. 1,8 t dimensions of the machine ca. m decoiler, MHR 250/4: max. coil diameter: 1400 mm coil diameter inside: 450 - 530 mm unbraked decoiler with pressure roller straightening machine, MR 250/4: Belt infeed height: 1250 mm The system was dismantled, checked and repainted.

Condition: good (used), Year of construction: 2003, pad printing machine, NIR POWER TC 24, year: 2003, Preis: 1.900 Euro, price: Mr. Rainer Eckerle Ijdpfod Ai Hksx Abnoif

Year of construction: 1980, condition: used, pressure 80 t throat - mm stroke 50 mm table surface area 875 x 695 mm ram surface 350 x 355 mm ram adjustment 71 mm no. of strokes 30 - 90 Hub/min distance between columns 450 mm weight of the machine ca. 6,2 t dimensions of the machine ca. 2,0 x 2,1 x 3,2 m daylight (stroke down, ram adjustment above) 480 mm Iiodpodlcy Hofx Abnof Further information: - the machine is currently being a partially overhauled - the machine was re-equipped with the following components: * separate control cabinet with touchscreen including cabling * new painting of the individual components in the dismantled state After the partial overhaul, the machine is safe for manual insertion open tool, a current UVV test is carried out before delivery and braking time measurement.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: NTC20 - 14720, cooling capacity: 21 kW (28.55 HP), type of input current: three-phase, type of cooling: water, overall weight: 225 kg, input voltage: 400 V, total width: 950 mm, total length: 1,080 mm, total height: 1,400 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Air-cooled chiller / water chiller, Type: NOVATECH NTC 20 NOVATECH NOVATECH NTC 20 are air-cooled compact water chillers suitable for indoor/outdoor installation (IP 54). Includes a shell-and-tube evaporator, 110-liter buffer tank, and built-in circulation pump. Galvanized steel frame, hot-painted with polyester powder. Special features: - Mounted expansion tank for internal water only - Shut-off valve between water inlet and outlet - Water outlet balancing valve Cooling capacity: 21 kW Cold water temp. Outlet/Inlet (°C): 15 / 20 Iedpswcflwefx Abnsif Flow rate (l/min) max. 100 Available pump pressure (bar) max. 3.3 Ambient temperature (°C) 35 Refrigerant: R 410A Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power consumption (kW) 8.85 Max. current (A) 12.5 Starting current (A) 19 Protection class: IP54 Dimensions: Length (mm) 1080, Width (mm) 950, Height (mm) 1400 Weight (kg) 225 Connection: Rp 1" Serial no.: 14720 Year of manufacture: 2020 Condition: Visually 1-2, Technically OK Used, like new Price: Available upon request in euros (plus VAT from Nettetal) – 3-month warranty Used machines may have cosmetic defects due to use. (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 88131 Lindau