Used Lms for sale (148)

Condition: good (used), Year of construction: 1988, Saw blade dimensions: 275 x 3.3 x 40 mm Prsdpfx Ajzvw Uhjhcsa Cutting capacity for straight cuts: Profiles and angles/pipes/solid material: 65 x 130/90/60 mm For miter cuts: Flat profiles and angles/pipes: 75 x 90/90 mm 2 saw blade speeds: 2000/4000 rpm Drive motor: 380 V, 1/1.2 kW Space requirement: 750 x 450 x 750 mm Weight:

Year of construction: 2020, condition: good (used), Used 6-meter straightedge from Pehu Top quality, new price approximately €20,000. Net measuring length: 6000 mm Prjdpfxszgua Nj Ahcja Also suitable for printing applications. Year of manufacture: 2020

Condition: ready for operation (used), Year of construction: 2021, operating hours: 280 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 700 mm, spindle motor power: 11,000 W, controller manufacturer: FANUC, number of axes: 4, This 4-axis Hyundai Wia LM 1800TTSY horizontal turning machine was manufactured in 2021. It features a slant bed lathe with main and counter spindle, two turret heads, and Y-axis with driven tools. Equipped with a Fanuc F31i A control, it supports a turning diameter of 230 mm and a length of 673 mm. If you are looking to get high quality turning capabilities consider the Hyundai Wia LM 1800TTSY machine we have for sale. Contact us for more information. Additional equipment • USB interface • Three-colour signal light • 1 set of soft jaws • CHIP CONVEYOR HS with lateral ejection • Transformer incl. cable • Manual compressed air gun • Bar feeder interface // Bar loader interface • Parts catcher main spindle • Parts unloader: Parts unloading system for the counter spindle incl. parts conveyor belt • Workpiece ejector / Workpiece drm: 230 mm / Workpiece X: 673 mm Machine Benefits Technical Machine Benefits • Linear (z) and flat-guided (x/y) 45 degree • Turning Ø: 230 mm // turning length: 673 mm • Chuck size both spindles: 8 inch (~210 mm) • Turret c-axis, 0. 001° // turret y-axis, +- 50 mm - upper turret • Driven tools: 5000 rpm, 5. 5 kw • 1 x axially driven tools // 1 x radial driven tools • Automatic tool probe • Coolant tank 270 litres // standard coolant nozzle • Internal cooling 30 bar • 30 bar coolant pump (60hz) Extra Information Strongly reduced interference contour Better workpiece accessibility Workpiece stabilization through axial pull against workpiece stop Chuck Type: SPANNTOP mini Chuck Model: Axzug Chuck Size: 65 Short Taper Standard: DIN ISO 702-1 Short Taper Size: Size 6 Length of Clamping Device: 155.00 mm Frontal Diameter: 111.00 mm Maximum Outer Diameter: 165.00 mm Clamping Position: 65.00 mm Clamping Device Thread: M102x1.5 Basic Stop Design: Clamped Actuation Type: Power-actuated Additional Chuck Options: Yes Front Stop Mounting: Yes Balance Quality: 4.0 Pull Tube Adapter according to Drawing For Clamping Device [ZCHN]: A054288.0009C Connection [of Clamping Device]: Internal Thread Clamping Device Thread Designation: M102x1.5 Clamping Device Thread Length: 17.00 mm Thread Position Clamping Device: 65.00 mm Predpezvv Dzefx Ahcoa Maximum Actuation Force: 65.00 kN Machine Manufacturer: Hyundai WIA Machine Designation: LM1800TTSY-HSP Connection [of Pull Tube]: External Thread Thread Designation: M74x1.5 Thread Length: 40.00 mm Front Position Pull Tube: 57.50 mm Stroke of Clamping Cylinder: 17.50 mm Spindle Bore Diameter: 76.00 mm Pull Tube Inner Diameter: 66.00 mm SPANNTOP mini Axfix 65 KK6 Chuck Type: SPANNTOP mini Chuck Model: Axfix Chuck Size: 65 Short Taper Standard: DIN ISO 702-1 Short Taper Size: Size 6 huck Type: SPANNTOP mini Chuck Model: Axfix Chuck Size: 65 Short Taper Standard: DIN ISO 702-1 Short Taper Size: Size 6 Length of Clamping Device: 138.00 mm Frontal Diameter: 119.00 mm Maximum Outer Diameter: 167.00 mm Clamping Position: 50.00 mm Clamping Device Thread: M94x1.5 Basic Stop Design: Clamped Actuation Type: Power-actuated Additional Chuck Options: Yes Front Stop Mounting: Yes Balance Quality: 4.0 Pull Tube Adapter according to Drawing For Clamping Device [ZCHN]: A071618.0004C Connection [of Clamping Device]: Internal Thread Clamping Device Thread Designation: M94x1.5 Clamping Device Thread Length: 17.00 mm Thread Position Clamping Device: 50.00 mm Maximum Actuation Force: 45.00 kN Machine Manufacturer: Hyundai WIA Machine Designation: LM1800TTSY-GSP

Condition: used, Year of construction: 2012, saw blade diameter 400 mm capacity 90 degrees: round 130 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 180 x 100 mm Psdpfxoy N D Nho Ahcora saw blade turning speeds 3000 U/min total power requirement 2,2 kW weight of the machine ca. 0,51 t dimensions 3,8 x 1,6 x 1,7 m Automatic Aluminum Circular Saw - Outfeed roller conveyor (4000 mm) with handwheel, flip-up stop, and digital system - Infeed roller conveyor (3500 mm) - Transport dimensions 6.0m x 2.0m x 1.6m

Condition: good (used), Year of construction: 2012, 300mm max cutting diameter, 510mm mm max turned length, Prjdpfx Ahozg Eb Docoa 51mm bar capacity, 11kW motor, Spindle speed 6,000 rpm, milling speed 6,000 rpm, sub-spindle speed 6,000rpm, C axis 0.001 degrees, Fanuc oi-Series Control, 3 Jaw Chuck, Tool setter, 12 Station turret, parts catcher, parts conveyor

Condition: good (used), Year of construction: 1967, functionality: fully functional, Metal cut-off saw Type LMS I - Year of manufacture: 1967 - 380 Volt - 1450 rpm; 2950 rpm - 1.8 kW Transport available at an additional cost! Pjdpfx Asxa Hkmshcora Due to the age of the used machine, warranty is excluded for sales to commercial customers.

Condition: used, Year of construction: 2009, functionality: fully functional, The machine is disassembled and stored in a warehouse. Photos of the modules are available upon request. Please submit reasonable offers. We have a Kern 2600 machine for sale. Below you will find information about the envelope inserting system offered for sale: - Equipped with Mail Factory - KVS Inserting and Sealing Module - K990 Cutter (Datalogic scanner upper and lower) + K940 Merger x 1 pc - DE Direct Entry Module x 1 pc - LM Spacer Module x 1 pc - FSH Folding Module x 1 pc - BFGD Module x 2 pcs - Transport Module x 1 pc - Output Bin x 4 pcs - VRO with conveyor When purchasing together with a Kern 3500 machine, an attractive package price can be arranged. Additional modules from another machine are offered in a separate listing and available upon request: - EFQR Single Sheet Feeder right x 1 pc - SIGR Continuous Forms Cutter right with K2600 Options Station x 1 pc - BFGD Module (for parts only, incomplete, without covers) x 1 pc Pjdpsy Eym Uofx Ahcora - LM Spacer Module (functional, fully complete) x 1 pc - VRO with conveyor (functional, fully complete) x 1 pc

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: 1950, turning diameter over cross slide: 225 mm, turning length: 425 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Z-axis: 400 mm, spindle motor power: 7,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,729 mm, total length: 3,255 mm, total width: 2,612 mm, quill diameter: 80 mm, quill stroke: 100 mm, type of input current: three-phase, For sale is a SAEILO ACE 12+ CNC turning center, manufactured in 2017 and first commissioned in July 2018. It includes a BOSS 552 bar feeder with 32 tool positions, manufactured in 2018. The machine is based on the ACE Designers Jobber LM Elite and is equipped with a FANUC Series 0i-TF control. The machine number is 1950. The machine is currently connected and can be inspected while powered on. It is in used condition with typical signs of wear from industrial use. The scope of delivery includes an IEMCA Boss 552-HD heavy-duty bar feeder, type 32 LL, manufactured in 2018, serial number 021835GA03. The bar feeder weighs approximately 830 kg, operates on 400 V / 50 Hz, and requires 6 bar of compressed air. Technical data of the machine: max. machining diameter 320 mm, swing over bed 500 mm, swing over slide 225 mm, distance between centers 425 mm, X-axis travel 165 mm, Z-axis travel 400 mm, spindle speed up to 5,000 rpm, 8 tool stations, tool cross-section 25 x 25 mm, rapid traverse X/Z 30 m/min, and a machine weight of approximately 4,000 kg. Electrical data: 380/400 V AC, 3-phase, 50 Hz, 24 V DC control voltage, 40 A fuse, 23/22 A rated current, and 15 kVA connection power. Psdpfx Ahszl D Rujcora Important note: The measuring arm is currently not functioning. Other functions can be tested during an on-site inspection while the machine is powered on. The machine is located in Bocholt. Inspection and pickup are possible by arrangement. Transport and loading are the responsibility of the buyer.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, color channels: 6, number of print heads: 24, resolution (max.): 1,000 dpi, paper width (max.): 3,200 mm, The printer is in excellent condition, until a few months ago it was under a Durst contract. Configuration is CMYK lc lm, heads and everything else is in perfect working condition, printing is excellent even in the fastest modes. The machine works great and very reliable. Rip Grand Caldera comes with the machine. It can be viewed and tested at any time Psdpfx Ahexv Dx Hecera

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 205 mm, travel distance Z-axis: 550 mm, number of axes: 4, This 4-axis DOOSAN Lynx 220 LMS was manufactured in 2013. It features a Fanuc 31 i control unit and comes equipped with a short bar loader/bar feeder. If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 220 LMS machine we have for sale. Contact us for further details. - Manufacturer: Doosan- Model: Lyax 220 LMS- Year of Construction: 2013- Condition: Very good / Fully functional- Control Unit: Fanuc 31 i- Included Equipment: Short bar loader / Bar feeder (visible connected to the left of the lathe) Technical Specification Counter Spindle Yes Driven Tools Yes Prsdezb Ergepfx Ahcja

Condition: used, Miter saw for aluminum, EISELE, Type LMS II HVG-225 Machine no. 0107, year of manufacture 1980 Cutting range: 90° = 150 x 100 mm 45° = 120 x 100 mm Saw blade diameter: max. 400 mm Miter cut: +/- 45° Saw blade speed: 1700 / 3400 rpm Motor power: 1.4 / 1.9 kW Power supply: 380 volts, 50 Hz Table size in front of the stop angle: 580 x 350 mm - Motor type RF 1.5 / 4 / 2-7 - Saw unit for shifting cut, tiltable 45° to the left - Machine equipped with a saw blade for aluminum, Ø 400 mm - Hose connection for chip extraction, Ø 80 mm - Sturdy metal base Prsdpfx Ajzinzrehcja Space requirement (L x W x H): 1050 x 1020 x 1700 mm Weight: 150 kg In good condition

Year of construction: 2004, condition: good (used), Underfloor saw Manual operation For saw blade up to Ø 300 mm Mitre cutting left - right up to 45° Manual spray unit for emulsion Robust steel housing and support table made of grey cast iron 400V Pedpsy Nm Hiefx Ahcora Mobile on base frame

Condition: ready for operation (used), Year of construction: 2014, controller manufacturer: FANUC, controller model: 21‑i TB, This 4-axis HYUNDAI KIA SKT 21 LMS was manufactured in 2014. It features a Fanuc 21-i TB control unit, a maximum machining diameter of Ø 254 mm, and a length of 531 mm. The spindle speed reaches up to 6,000 rpm, and it includes a 12-position tool magazine and a chip conveyor. If you are looking to get high-quality turning capabilities, consider the HYUNDAI KIA SKT 21 LMS machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Number of axes: 4 (x, z, c, b) /x axis travel: 221 mm /z axis travel: 549 mm • Max. Machining diameter: Ø 254 mm/ max. Machining length: 531 mm Prodpfxsyaln Ee Ahcea • Tool magazine: 12 positions • Equipment: chip conveyor /bar feeder: top automazioni mod. Magic

Condition: ready for operation (used), Year of construction: 2021, operating hours: 3,316 h, spindle speed (max.): 3,500 rpm, This Hyundai Wia SE2200LMSC Lathe was manufactured in the year 2021 in Korea and has 3316 production hours, of which 538 are spindle hours. It is equipped with a Hyundai Fanuc i Series Smart Plus control unit. The machine has a spindle speed of 3500 rpm. Machine Benefits Technical Machine Benefits • 6. 000 rpm is the max. Speed for the counter spindle Prjdpfxezvvuts Ahcsa Extra Information power on 3316h run time 753h cutting time 538h Control – Hyundai Fanuc i Series Smart Plus 10” chuck spindle – 3500rpm - 270Nm 5” chuck spindle - 6000rpm C-Axis 0,001 degree Turret – 24 tool holders

Year of construction: 2021, operating hours: 60 h, condition: good (used), functionality: fully functional, machine/vehicle number: X620DM-WL, We are selling a very good endoscope. As plant engineers, we used the device for endoscopic inspection of weld seams in piping systems. It delivers excellent image quality and is very easy to operate. Unfortunately, the 2-meter probe length is no longer sufficient for our needs, so we need to sell it and purchase a new one with a longer probe. The device is only 3 years old. Details from the order confirmation: Portable Video Endoscope VTec X Series Forward or side view, white light State-of-the-art CMOS camera technology Bright high-resolution 5.5" monitor integrated into the handset Specifications: Probe diameter: 6.1 mm +0.1 Probe length: 2.0 m Viewing direction: 0° / 90° Depth of field: 7 - 80 mm / 3 - 30 mm Field of view: 100° / 90° Pjdpfxou Ul A No Ahcjra Illumination: White light Front LED, 3.22 lm Side LED, 6.45 lm Camera resolution: Front: 1280 x 960 pixels Side: 1280 x 960 pixels Monitor resolution: 1920 x 1080 pixels Bending angle: ≤ 150° ±10 Bending functionality: Controlled via 4-way motorized joystick Power supply: Four Li-Ion batteries (18650) with protection circuit or via power adapter Environmental conditions, protection class, and weight: Handset: -10°C to +50°C, IP 54, 1.50 kg Probe: -20°C to +70°C, IP 67 Included in delivery: Video Endoscope VTec X620DM-WL SD-USB card reader HDMI cable Mini USB data cable including USB power adapter Battery charger including power adapter Power adapter Four Li-Ion batteries (18650) with protection circuit User manual Transport case Rigid Shaft Adapter with Handle for 6 mm Video Endoscopes Working length of shaft: 350 mm Includes mount for 1/4" tripod thread

Condition: used, Year of construction: 2009, Overview This LM S.p.A. multiline divider is a lane-dividing system for bottle conveying, built in 2009 by LM S.p.A. (Modena, Italy). It sorts a single-lane bottle stream into up to 4 lanes and is offered together with a bottle conveyor system manufactured by GEA Procomac - 4 lanes with each approx. 10m multiline conveyors plus the divider unit. The system is still installed and under power in a German water and soft-drinks bottling plant, remains in production until 30 September 2026, and can be visited in operation. Technical data - Manufacturer of multiline divider: LM S.p.A. (Modena, Italy) Prjdpezuc Rxsfx Ahcea - Manufacturer of bottle conveyors: GEA Procomac - Year of manufacture: 2009 - Machine type: multiline divider with bottle conveyor system - Lane division: up to 4 lanes - Capacity: min. 12,500 bottles per hour - Conveyor length: approx. 4 lanes each 10m (multilines) plus divider Scope of delivery - LM S.p.A. multiline divider - GEA Procomac bottle conveyor system - Drive units, guide railings and safety guards as installed Condition The equipment is in very good condition. It is still installed and under power and remains in production until 30 September 2026; operation can be demonstrated on site. Availability Available from 7 October 2026. The equipment will be dismantled and loaded onto the buyer's trucks by the seller between 7 and 10 October 2026. Location: Germany.

Condition: like new (used), Year of construction: 2023, operating hours: 343 h, functionality: fully functional, machine/vehicle number: G3791-0010, turning length: 705 mm, turning diameter over cross slide: 290 mm, turning diameter: 230 mm, spindle motor power: 20 W, spindle speed (min.): 10 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 51 mm, travel distance X-axis: 190 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 40 m/min, bar diameter (max.): 51 mm, overall weight: 8,200 kg, • High-performance, integrated spindle motor • High productivity through simultaneous use of the upper and lower turrets • Robust BMT turret • Integrated machining through synchronized control of the main and counter spindle Specifications: • Max. turning diameter 230 mm • Max. turning length 705 mm • Chuck size, main/auxiliary 6" / 6" • Drive type: Integrated Pedpjzd Dizjfx Ahcsra • Spindle speed 6,000 rpm • Spindle power 15/11 kW • Spindle torque 208/140 Nm • Travel distances (X1/X2/Z1/Z2/ZB) 65/195/700/720/700 mm • Rapid traverse (X1/X2/Z1/Z2/ZB) 20/20/40/40/40 m/min • Guide type: LM (linear motion) • Number of tools 2 x 12 • Tool size 20/32 mm • Milling spindle speed 5,000 rpm

Condition: used, mileage: 977,000 km, power: 294 kW (399.73 HP), first registration: 08/2012, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2025, brakes: retarder, color: yellow, emission class: euro5, loading space length: 6,500 mm, loading space width: 2,500 mm, loading space height: 1,000 mm, Year of construction: 2012, Equipment: ABS, air conditioning, crane, navigation system, parking heater, Very well-maintained MAN TGS 26.400 construction materials truck with Atlas 220.2 loading crane and pallet tongs Special equipment: Trailer coupling: Rockinger 400 G 150 A, aerial car phone, work lights (2) on cab roof, exterior mirrors and wide-angle mirror electr. adjustable and heatable, wide-angle mirror with electr. maneuvering aid, battery 225 Ah, curb mirror right electr. adjustable and heatable, bolted bridge mounting bracket, rear axle differential lock, aluminum air reservoir, pressure sensor for air bags, ETA automatic fuse, cab: with air suspension, driver's seat comfort, air-sprung and heated, with lumbar support and shoulder adjustment, remote control central locking, flame-start system, transmission 12-speed - type: ZF 12 AS, Tipmatic, pneumatic transmission shift lock, high-load roll stabilization, automatic air conditioning, fuel tank: combi tank - 480 ltr. Diesel + 75 liters urea solution (AdBlue), Steering wheel with multifunction, LM rims 9.00x22.5 (ALCOA matt on 1st rear axle), LM rims 9.00x22.5 (ALCOA matt on 1st front axle), LM rims 9.00x22.5 (ALCOA matt on 2nd rear axle), heated air dryer, Eberspächer D4S auxiliary air heater, NAS/10C power take-off without flange, spare wheel LM rim 9.00x22.5 ALCOA matt, Retarder, Seat cover/upholstery: comfort quality, Exterior sun visor, Side window sunblind, Driver and passenger door, Socket for cab 12V and 24V, Fleet management system control module, Reinforced front axle shock absorbers, Preparation for engine start/stop system at frame end, Additional high beam/fog lights with cornering light Prjdpfxjvm R Rus Ahcea Further equipment: Axle configuration: 6x2, Approach/front mirror, Trailer socket 24V / 7-pin, Trailer socket ABS, Anti-slip control (ASR), Audio system: MAN basic Line radio (radio / CD), MAN-Tronic on-board computer, MAN-Brakematic electronic braking system, EURO 5 engine, Cab: L, Suspension: leaf / air, Electric windows, Tinted windscreen, Generator 28 V 80 A, Mechanical lifting roof, Body/structure: Chassis, rocker arm - brake EVB, fuel filter heated, air intake raised, air compressor 1-cyl. 360 ccm, engine 10.5 ltr. - 294 kW diesel, trailing axle NO-08, liftable, spare wheel holder behind rear axle, disc brake rear axle, disc brake front axle, side guard, tinted side windows rear, sun protection roller blind for windscreen, spray mist reduction, stabilizer on one rear axle, stabilizer front axle, TGS, tinted door windows, underride guard rear, underride guard front, viscous fan, front axle VOK-09 cranked, central locking, gross vehicle weight 26.00 t Tire condition: front axle approx. 80% rear axle approx. 60% The vehicle can also be sold complete with trailer. The price of the trailer is 5.000,--¤ net For questions regarding the equipment please call. Subject to errors and prior sale!

Condition: used, mileage: 977,000 km, power: 294 kW (399.73 HP), first registration: 08/2012, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2025, brakes: retarder, color: yellow, emission class: euro5, loading space length: 6,500 mm, loading space width: 2,500 mm, loading space height: 1,000 mm, Year of construction: 2012, Equipment: ABS, air conditioning, crane, navigation system, parking heater, Very well-maintained MAN TGS 26.400 construction materials truck with Atlas 220.2 loading crane and pallet tongs Special equipment: Podpfx Aevm R R Ujhcjra Trailer coupling: Rockinger 400 G 150 A, aerial car phone, work lights (2) on cab roof, exterior mirrors and wide-angle mirror electr. adjustable and heatable, wide-angle mirror with electr. maneuvering aid, battery 225 Ah, curb mirror right electr. adjustable and heatable, bolted bridge mounting bracket, rear axle differential lock, aluminum air reservoir, pressure sensor for air bags, ETA automatic fuse, cab: with air suspension, driver's seat comfort, air-sprung and heated, with lumbar support and shoulder adjustment, remote control central locking, flame-start system, transmission 12-speed - type: ZF 12 AS, Tipmatic, pneumatic transmission shift lock, high-load roll stabilization, automatic air conditioning, fuel tank: combi tank - 480 ltr. Diesel + 75 liters urea solution (AdBlue), Steering wheel with multifunction, LM rims 9.00x22.5 (ALCOA matt on 1st rear axle), LM rims 9.00x22.5 (ALCOA matt on 1st front axle), LM rims 9.00x22.5 (ALCOA matt on 2nd rear axle), heated air dryer, Eberspächer D4S auxiliary air heater, NAS/10C power take-off without flange, spare wheel LM rim 9.00x22.5 ALCOA matt, Retarder, Seat cover/upholstery: comfort quality, Exterior sun visor, Side window sunblind, Driver and passenger door, Socket for cab 12V and 24V, Fleet management system control module, Reinforced front axle shock absorbers, Preparation for engine start/stop system at frame end, Additional high beam/fog lights with cornering light Further equipment: Axle configuration: 6x2, Approach/front mirror, Trailer socket 24V / 7-pin, Trailer socket ABS, Anti-slip control (ASR), Audio system: MAN basic Line radio (radio / CD), MAN-Tronic on-board computer, MAN-Brakematic electronic braking system, EURO 5 engine, Cab: L, Suspension: leaf / air, Electric windows, Tinted windscreen, Generator 28 V 80 A, Mechanical lifting roof, Body/structure: Chassis, rocker arm - brake EVB, fuel filter heated, air intake raised, air compressor 1-cyl. 360 ccm, engine 10.5 ltr. - 294 kW diesel, trailing axle NO-08, liftable, spare wheel holder behind rear axle, disc brake rear axle, disc brake front axle, side guard, tinted side windows rear, sun protection roller blind for windscreen, spray mist reduction, stabilizer on one rear axle, stabilizer front axle, TGS, tinted door windows, underride guard rear, underride guard front, viscous fan, front axle VOK-09 cranked, central locking, gross vehicle weight 26.00 t Tire condition: front axle approx. 80% rear axle approx. 60% The vehicle can also be sold complete with trailer. The price of the trailer is 5.000,--¤ net For questions regarding the equipment please call. Subject to errors and prior sale!

Condition: used, functionality: unexamined, For sale is a high-quality LED hand-held spotlight, model W 270. This hand-held spotlight impresses with its robust design, powerful LED technology, and long range. The focused beam is particularly suitable for illuminating larger distances and as a searchlight. In addition, the device features a diffused work light. In boost mode, the main spotlight achieves up to 330 lumens and a range of up to 50 meters. The two operating modes, Eco and Boost, allow the light output to be adjusted to the specific application. The additional work light offers a long operating time and is suitable for illuminating large areas. Additional features: 3 high-performance LEDs with a narrow beam reflector Boost mode with up to 330 lm Eco mode with 240 lm Additional work light with 65 lm Flashing light function Emergency light function Range up to 50 m Robust, impact-resistant plastic housing Protection class IP54 Suitable as a search, work, and signal light The W 270 features an external charger, making it slightly lighter. The W 276 has an integrated charger. Prodozwc E Uspfx Ahcoa The W 270 is supplied with a robust charging station that ensures reliable charging and quickly makes the spotlight ready for use again. Ideally suited for fire departments, THW (Federal Agency for Technical Assistance), security services, workshops, camping, outdoor operations, or as a reliable emergency light.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 17 h, functionality: fully functional, machine/vehicle number: 4153-3431-0023-7, type of input current: three-phase, total height: 892 mm, total width: 508 mm, total length: 1,090 mm, input voltage: 400 V, overall weight: 108 kg, type of cooling: water, hose package length: 4,000 mm, electrical fuse: 32 A, open-circuit voltage: 80 V, welding current at 60% duty cycle: 400 A, welding current at 100% duty cycle: 300 A, input current: 32 A, protection type (IP code): IP23, welding current (min.): 20 A, welding current (max.): 400 A, Equipment: documentation/manual, type plate available, Demonstration unit, year of manufacture 2024 includes Lorch MIG-MAG torch iQ-LMS 400 W PM, 4 m. Psdpozki Szsfx Ahcsra

Condition: like new (used), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, turning length: 1,070 mm, turning diameter: 460 mm, spindle motor power: 22 W, spindle speed (max.): 3,500 rpm, travel distance X-axis: 265 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, ONLY 10 HOURS !!!!! There are 8 Doosan CNC Turning center Like this in our warehouse 1 Set DOOSAN GT2600 LM CNC Turning center With C Axis - 12 inç - 10 Hours 2 Set DOOSAN GT 2600 CNC Lathe 12 inç 10 hours 2 Set DOOSAN GT2100 CNC Lathe 10 inç 10 hours 3 Set DOOSAN Lynx 2100 CNC Lathe 8 inçh 10 Hours Prodpfxszk I Rvo Ahcja you can visit and check all machine

Condition: used,

Condition: good (used), Year of construction: 2007, CNC turning machine DOOSAN Type: PUMA 480 LM Year of manufacture: 2007 Control: Fanuc 21i T Technical data Swinging diameter mm 900 Turning diameter standard mm 380 Max. turning diameter mm 650 Turning length mm 2001 Travel X-Z axis mm 362/155 Bar diameter mm 165.5 Spindle bore mm 181 Chuck diameter mm 530 Spindle speed rpm 1500 Drive power kW 45 Tool turret number 12 Powered tools number 12 Prodpfx Ahezqzm Djcja Speed of powered tools rpm 3000 Drive power kW 11 Accessories 3-jaw power chuck, tailstock programmable (following) with programmable center, chip conveyor with hinged belt, steady rest self-centering SLU 4 Ø 35-245 mm, tool load monitoring, coolant pump 14 bar, Automatic tool measuring arm.

Year of construction: 1999, condition: used, Saw blade diameter: 300 mm Manual material clamp Minimum quantity spray device Good condition 120 kg Pjdpfx Asw Im Trshcora