Condition: used, Year of construction: 2013, Manufacturer: HSM Type: HL 4010 Re Bjdpfx Aoz I N Uhsgrsww Year of manufacture: 2013 Pressing force: 40 t

Condition: used, Year of construction: 1999, functionality: fully functional, overall weight: 12,000 kg, power: 5.5 kW (7.48 HP), input voltage: 400 V, empty load weight: 5,200 kg, DGUV certified until: 02/2027, We are offering this used Husmann SPB 20 FKL press container, manufactured in 1999, for sale. Type: SPB 20 FKL Machine No.: 18590 Volume: 20.0 m3 Power: 5.5 kW Bjdpfx Agozg Ha Ioroww Unladen weight: 5200 kg Permissible total weight: 12000 kg Voltage: 400 V Year of manufacture: 1999 Last maintenance (UVV & DGUV): 02/2026 Two-part lid for ramp access Steel scraper Fully functional If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, Model: HSM V-press 1160 plus baler Bodpfx Agov Al Tisreww Pressing force (kN): 59 Output (bales/h): 1-2 Max. bale size (mm): 1200x1100x1000-1200 Dimensions (L x W x H, mm): 1780x1150x2985 Power (kW): 4kW Weight (kg): 2300 Year of manufacture: 2018-2019

Condition: excellent (used), Year of construction: 2019, pressure 13 t box opening 890 x 600 mm box depth 400 mm total power requirement 2,2 kW weight of the machine ca. 0,765 t dimensions of the machine ca. TBH 1,4 x 1,3 x 2,15 m for cans, PET, and cardboard MACFAB (distributed by BEMA Verpackungsabfall GmbH). • Pressing force: 130 kN (13 tonnes) • Motor power: 2.2 kW • Voltage: 230 V / 50 Hz (1-phase, AC) • Machine dimensions: H: 2,133 mm | W: 1,040 mm | D: 1,328 mm • Loading opening: H: 890 mm | W: 600 mm | D: 400 mm • Bale dimensions: approx. 650 mm (H) x 400 mm (D) • Typical bale weights: Bwodpjz Rqp Hefx Agrsw • Cardboard: 40 – 60 kg (depending on material) • Aluminum cans: up to 25 kg (approx. 1,500 cans) • PET bottles: up to 32 kg (approx. 1,000 bottles) • Special feature: Cross-strapping ensures stable bale shapes for cans and plastics. Fast cycle time of 24 seconds. Low operating noise level of 72 dB.

Condition: good (used), Technical specifications: Briquetting press in good condition Year of manufacture: 2007 Bwjdpfxowtdk To Agrow Technically inspected in 06 / 2025 Cylindrical briquette: 80 mm Throughput up to max. 150 kg/h *only approx. 3,949 operating hours - Hydraulic press: briquetting press with discharge chute - Hydraulic unit: 4 kW - Pressure: max. 300 bar - Transport dimensions: 1585/2140/H1940 mm - Weight: 1,370 kg Functional guarantee upon handover We are happy to arrange a free test run!

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 26 t, overall weight: 1,080 kg, Equipment: documentation/manual, In perfect condition, tested and fully equipped. New hydraulic hoses, new oil, and new gas springs for the doors. Bedpfx Agjztgnxerjww

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, pressing force: 26 t, filling opening width: 1,500 mm, filling opening length: 630 mm, bale length: 1,500 mm, bale width: 800 mm, bale height: 1,140 mm, bale weight: 500 kg, total width: 1,060 mm, total height: 2,576 mm, total length: 2,075 mm, overall weight: 1,220 kg, noise level: 65 dB, power: 4.6 kW (6.25 HP), Powerful bale press Orwak 3820 Power. Bwedpfxexmvc Ee Agrjw Extra good machine for big dimensions cardboard or foil because of the extra large feed opening 1500 x 630 mm.

Condition: good (used), Brand: BRAMIDAN Model: B3 Width (cm): 94 Depth (cm): 72 Height (cm): 198 Weight (kg): 310 Power (kW): 1.1 Voltage (V): 230 Chamber width (cm): 70 Chamber depth (cm): 50 Bwedpfx Asv Akr Rsgrsw Chamber height (cm): 110 Year of manufacture: 2010-2015 Pressing force (t): 3 Noise level (dB): 69 Price: 2000 EUR B5 - Ideal for large boxes: High performance – high throughput Bales are ejected automatically Belt rollers positioned at the front for easy belt replacement Weight of cardboard bale (kg): 80-110 Weight of plastic film bale (kg): 90-130 Bale size (W x D x H) (mm): 1000 x 700 x 800 Pressing force (t): 5 Power supply: 1x230V 50Hz 10A Motor (kW): 1.1 Noise level (dB): 65-68 Average cycle time (sec): 33 Dimensions (W x D x H) (mm): 1360 x 895 x 2370 Weight (kg): 600 Feeding opening width x height (mm): 1000 x 500 Year of manufacture: 2014-16, cost: 3800 EUR Orak 3100 baler costs 2000 EUR Orwak 3105 baler costs 2200 EUR

Condition: used, Year of construction: 2013, Manufacturer: HSM Type: HL 4010 Li Year of manufacture: 2013 Bwodpfxszxzxce Agrew Pressing force: 40 t

Condition: used, Year of construction: 2013, We are offering this used AMIS ZBP 400 briquetting press, manufactured in 2013. We also include a Forst ARJES ZWS 110 wood shredder with a conveyor belt. However, these can also be sold separately. Amis Manufacturer: Amis Model: ZBP 400 Year of manufacture: 2013 Condition: used Machine type: Briquetting press Forst Shredder ZWS 110 with 30 kW motor 20 mm screen with electrical system with segmented base and slide with toothed rail Slide with roller guide Preparation for conveyor belt discharge Inclined conveyor belt AA = 1700 horizontal AA = 4500 vertical Belt width = 580 mm with PVC belt with metal-free zone with 1.5 kW drive Bwsdpfozp Eyfsx Agrow If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2014, Manufacturer: HSM Type: HL 4010 Re Year of manufacture: 2014 Bwodszxqkzopfx Agrjw Pressing force: 40 t

Condition: ready for operation (used), Bramidan 4-0F Engine: 4 kW Press dimensions: 250 x 100 x 255 cm Bale dimensions: 1100 x 700 x 950 cm Bale weight: 200-250 kg Bwodpfev Ai Uqox Agrew Pressure: 18 tons Weight: 1580 This machine is used to reduce the volume of waste such as film, paper, etc. Price: 4800 EUR Aventek MK 2500 baler This is an industrial baler for compressing waste such as: film cardboard / paper plastics pressing force: 25 tons bale weight: 400 kg, depending on the material bale dimensions: approx. 1200 × 800 × 800 mm cycle time: approx. 50 s power supply: 400 V engine power: approx. 5.5 kW Year: 2013 Price: 6800 EUR ORWAK 9020 baler: - 2.2 kW motor - 380V - 20-ton pressure - bale dimensions: 1100x700x800 - bale weight: depends on the raw material, 200-300 kg Price: 5500 EUR

Condition: ready for operation (used), B5 - Ideal for large boxes: Bwjdpfez Ntl Ijx Agrjw High performance – large capacity Bales are automatically ejected Belt rollers positioned at the front for easy belt replacement Weight of cardboard bale (kg): 80-110 Weight of plastic film bale (kg): 90-130 Bale size L x W x H (mm): 1000 x 700 x 800 Pressing force (t): 5 Power supply: 1x230V 50Hz 10A Motor (kW): 1.1 Noise level (dB): 65-68 Avg. cycle time (sec): 33 Dimensions L x W x H (mm): 1360 x 895 x 2370 Weight (kg): 600 Feed opening width x height (mm): 1000 x 500 Year 2016, price: 2900 EUR

Condition: used, Year of construction: 2015, Manufacturer: HSM Model: HL 4010 Li Bwodpfxjzxzv Ue Agrow Year of manufacture: 2015 Pressing force: 40 t

Condition: used, Year of construction: 2015, Manufacturer: HSM Bwedpszxqpdofx Agrsw Type: HL 4010 Re Year of manufacture: 2015 Pressing force: 40 t

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, pressing force: 90 t, bale weight: 700 kg, type of input current: three-phase, total width: 220 mm, total height: 240 mm, overall weight: 23,000 kg, total length: 1,142 mm, filling opening width: 90 mm, filling opening length: 140 mm, bale width: 80 mm, bale length: 1,200 mm, bale height: 110 mm, tank capacity: 1,100 l, year of last overhaul: 2025, Equipment: documentation/manual, Paal Licon 250 SC Channel Baler Originally built for baling non-ferrous scrap, for the last 12 years this machine has been used at a packaging plant. It processed 700–800 tonnes of cardboard per month. Machine specifications: - Length: 11.42 m - Width: 2.20 m - Pressing force: 80 t - Bale/channel dimensions: 110 x 80 cm - Feed opening: 140 x 90 cm - Machine weight: 23 t - Dual high-efficiency cooling system designed for continuous 24-hour operation in a warm workshop environment Bwjdpjxdnn Iefx Agrjw The machine floor has been overhauled; the main ram/cylinder is just six months old. The knives for trimming excess material have been replaced and upgraded for faster and more efficient operation. In 2025, the hydraulic oil was changed, distribution valves serviced, and all rollers of the main plunger/plate replaced. The pressing ram has also been refurbished. Comes with plenty of spare parts. Equipped with upgraded electronics and control panel from 2018, fully operational and ready for immediate use. Operation via touchscreen display. Comprehensive photographic documentation from the dismantling process is available. Complete technical documentation (DTR) in Polish and electrical schematics included. Testing of the machine is possible on-site. Additionally available: - Roller bale discharge system with conveyors, tipper, weighing system, and bale storage (as shown in the photos), Or optionally: - Tipping elevator for emptying 1100 L or 660 L bins - PAAL KES1750 chain channel conveyor: width 1750 mm, horizontal section 8 m, inclined section 8 m.

Condition: good (used), Year of construction: 2009, functionality: fully functional, pressing force: 61 t, filling opening width: 1,420 mm, filling opening length: 972 mm, bale width: 1,100 mm, bale height: 720 mm, total width: 2,085 mm, total length: 8,740 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 18,000 kg, pressure: 280 bar, oil tank capacity: 800 l, power: 22 kW (29.91 HP), Used Baseline 60 for sale. The machine underwent its last maintenance in March 2026, and nothing unusual was found. The machine is fully functional and has now been taken out of production. The machine is in good condition. Technical specifications: Year of construction: 2009 Main pump drive: 22 kW Needle drive: 4 kW Filter pump: 2.2 kW Oil cooler: 1.5 kW Working pressure: 280 bar Oil tank capacity: 800 L Pressing force: 61 tons Specific pressing pressure: 7.7 kg/cm2 Pressing stroke: 2000 mm Dimensions of pressing channel: 1100 x 720 mm Volume of pressing chamber: 1.6 m3 Bale length (adjustable): 1300 mm Bale weight (approximate): up to approximately 500 kg Number of binding wires: 5 vertical Dimensions of filling chute: 1420 x 972 mm Weight of press: approximately 18 tons Noise level: < 85 dB(A) Average cycle time: 19.2 sec Capacity (depending on the material, material feed, and bale weight): 30 kg/m3: 6.9 tons/hour 60 kg/m3: 12.8 tons/hour 100 kg/m3: 19.2 tons/hour 150 kg/m3: 25.8 tons/hour Bwsdezlnb Dspfx Agrjw

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 27 h, one machine directly available *Prior sale expressly reserved *Round silo at extra charge Press can only be supplied with a system component such as a chipper, cutting mill, hammer mill, screw conveyor, conveyor belt with overbelt magnet or suction Hydraulic briquetting press for rectangular briquettes Type R - throughput up to maximum 500 kg / h * depending on the specific weight of material. Based on a bulk weight of 220 kg / m³. + 24h operation possible + Longevity + Low maintenance costs + Compact structure + High energy efficiency thanks to innovative hydraulics + 25 years of experience . * depending on the bulk weight of your raw material * based on a bulk weight of 200 kg per cubic meter Detailed information after a successful test with your material . Drive motor: 22 kW - IE 3 400 V / 50 Hz / 3 phases Oil cooler: 2.2 kW Agitator: 0.55 kW Screw: 1.5 kW Bodpfjgbpm Tjx Agrsww . Hopper: 400x800mm Capacity of approx. 150 liters . Soft start for hydraulic motor Siemens PLC S7-1200 . Auto start and stop via a light barrier integrated in the feed hopper Up to 560 briquettes per hour . Specific pressing pressure: 1,700 kg / cm² Up to 300 bar pressing pressure Briquette format 150x60 mm Briquette length: 40 to 110 mm (adjustable) Dimensions: 2.9 x 2.0 x 2.1 m Weight: 3,800 kg. 600 liter hydraulic oil tank The control is designed for operation from + 10 degrees to +35 degrees . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 15% - Maximum chip length: 20 x 2 x 2 mm - Installation temperature: temperature-controlled room at at least + 8 ° C Otherwise, we recommend heating for an extra charge - The loading must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear can be the result.

Condition: good (used), Year of construction: 2000, pressing force: 80 t, bale width: 1,100 mm, bale height: 720 mm, noise level: 85 dB, oil tank capacity: 900 l, empty load weight: 24,000 kg, operating pressure: 250 bar, For sale: a Bollegraaf 80A baling press from the year 2000, including a feed conveyor. The machine is in working condition and is still in use. The machine can be inspected by appointment. The machine is equipped with a pre-compression flap, cross-tying with horizontal wires, and is powered by a 45 kW main pump. The feed conveyor has a working width of 1500 mm. Bwsdpfxez Sza Ej Agrsw

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, pressing force: 2 t, bale length: 1,200 mm, bale width: 500 mm, bale height: 400 mm, bale weight: 100 kg, overall weight: 1,820 kg, This is a fully automatic baling machine that ties the bales with two steel wires (2.2 mm in diameter). A fan blows the waste paper into the machine through special tubes with a diameter of 100 mm. The fan and approximately 10-meter-long tube are included in the price. The machine is in working condition and can be tested. For sale due to lack of use; ideal for baling waste paper from printing and hygiene products. Bjdpjy Ic Rusfx Agrsww

Condition: good (used), Year of construction: 2006, Channel baling press Presona LP 80 VH1 with Wirbulator, year of manufacture 2006, refurbished. Technical data: Manufacturer: Presona Sweden Type: LP 80 VH1 Year of manufacture: 2006 Pressing force: 78 t Drive power: 55 kW Feed hopper dimensions: 1500 x 1100 mm Bale dimensions: 750 x 1100 mm Bale weight: approx. 450-600 kg Throughput capacity with a bulk density of: 30 kg/cbm: 9-12 t/h 50 kg/cbm: 14-17 t/h 100 kg/cbm: 16-25 t/h MSW (municipal solid waste): 20-27 t/h Tying: 5-ply vertical Weight: approx. 25000 kg Note: The press has been refurbished by us. The following work was carried out: Press cleaned and repainted Piston rod refurbished Steel structure on the press body New Hardox wear plates for the press bed Replacement of: Shaft for wire control Chain for wire pull Wire pull needles Wire guide rollers Bsdpfx Aj Ahhxiogrsww Running wheels Guide rails Hydraulic hose lines Hydraulic seals Oil temperature sensor Photo cells in the feed hopper Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty.

Condition: used, Year of construction: 2018, pressing force: 80 t, filling opening width: 1,040 mm, filling opening length: 1,110 mm, bale length: 1,200 mm, bale width: 1,120 mm, bale height: 1,120 mm, bale weight: 600 kg, total width: 1,830 mm, total height: 2,620 mm, total length: 4,200 mm, type of input current: three-phase, input voltage: 400 V, input current: 32 A, overall weight: 8,000 kg, input frequency: 50 Hz, DIXI 80 SLD Horizontal Baler – Year of Manufacture 2018 Used, fully functional DIXI 80 SLD horizontal baler for the economical compaction of cardboard, paper, and comparable recyclable materials. Bwjdpfez Hqwbsx Agrjw Technical data: Manufacturer: DIXI Model: 80 SLD Year of manufacture: 2018 Pressing force: 80 t Drive power: 11 kW Connection: 400 V / 32 A Feed opening: approx. 1,040 x 1,110 mm Bale size: approx. 1,120 x 1,120 x 1,200 mm Bale weight: approx. 500–600 kg, depending on the material Press cycle: approx. 35 seconds Throughput: up to approx. 1,000 kg/h, depending on the material Machine weight: approx. 8,000 kg Machine dimensions: approx. 4,200 x 1,830 x 2,620 mm (L x W x H) The machine is in used, fully functional condition. All information is provided without warranty. Subject to prior sale.

Condition: reconditioned (used), Year of construction: 1987, functionality: fully functional, pressing force: 10 t, filling opening width: 580 mm, filling opening length: 900 mm, bale length: 800 mm, bale width: 500 mm, bale height: 600 mm, bale weight: 100 kg, total width: 1,000 mm, total height: 1,540 mm, total length: 4,700 mm, overall weight: 1,200 kg, power: 6.8 kW (9.25 HP), transport length: 4,700 mm, Equipment: documentation/manual, safety light barrier, The machine has been overhauled by us and was completely disassembled. Main cylinder resealed. New hydraulic hoses. New hydraulic oil. Sub-oil motor. Plexiglass panels replaced. Guide rollers on the press plate readjusted. Triple horizontal manual tying. Tying with wire. Bale length adjustable: 400, 600, 800, 1000 mm. Operating manual with electrical and hydraulic diagrams available. Bjdpfxoy D Dr Ss Agrsww

Condition: like new (used), Year of construction: 2021, Almost New: Complete Compaction System Ludden & Mennekes SVS11+KEV 1. Stationary Screw Compactor L&M SVS 11 Virtually unused, stationary screw compactor (~1 month) designed for filling compaction containers and/or other containers. The machine is constructed from a robust, welded steel frame with continuously welded seams. Its low-maintenance screw compaction system is suitable for continuous feeding, and the compaction chamber does not require periodic cleaning. Main technical specifications Overall length: 2,480 mm Overall width: 1,660 mm Overall weight: 2,300 kg* Loading height: 1,350 mm Feed opening: 1,375 × 1,490 mm Screw diameter: 750 / 500 mm Screw speed: 17 rpm Drive power: 11 kW Residual-current device / Fused plug Type B / 300 mA 2. Hydraulic Container Coupling/Decoupling System Hydraulically operated coupling and decoupling system with forward and reverse movement. The hooking grippers are operated manually. Designed for the secure connection of different types of compaction containers. 3. L&M KEV Cardboard Intake/Deflection and Pre-Shredding Unit Virtually unused L&M KEV coarse shredding unit for bulky cardboard packaging, cardboard tubes with cores, and other large-format packaging materials. The material is reduced to a size suitable for efficient compaction, helping to improve compactor utilization and reduce disposal costs. The unit can be installed above L&M self-compacting containers or stationary compaction systems so that shredded material falls directly into the filling opening. Main technical specifications Dimensions (L × W): 1,230 × 1,490 mm Shredding shaft width: 1,400 mm Cutting knife diameter: 585 mm Number of cutting knives: 9 Feed opening: 960 × 1,400 mm Drive power incl. power supply: 2.2 kW + 0.75 kW 4. L&M PCS 6500 Compaction Container Main technical specifications Capacity: 32 m³ Dimensions: 6,500 × 2,500 × 2,600 mm Bedpez Eg Dzjfx Agreww PRICE ON REQUEST

Condition: excellent (used), Year of construction: 2012, Orwak 5030 in-bag compactor for mixed waste. Bwjdsrxfn Uepfx Agrew Tested, cleanded, full service was made. New oil.