Used press brakes with 150-199t bending force for sale (156)

Condition: good (used), Year of construction: 1996, Well-maintained, used press brake from Beyeler / Bystronic. Type PR6 150 4100 Capacity: 4100 x 150 tons Cybelec DNC 880S Credpfx Ajzbhh Remasf Y1, Y2, X, R, Z1, and Z2 axes CNC controlled Includes a set of tools.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Used Durma press brake Type AD S 30135 Capacity: 3050 x 135 tons Cybelec ModEva 15T CNC control Y1, Y2, X, R, Z1, and Z2 axes CNC controlled CNC crowning Amada / Euro clamping Includes a set of tooling Cedpfx Asza U Twsmajrf

Condition: defective spare-parts repository (used), Year of construction: 1993, machine/vehicle number: 208712, functionality: not functional, pressing force: 150 t, table length: 3,550 mm, oil tank capacity: 390 l, Folding press EHT EHPS 15-35 150 t | 3,550 mm | Year of manufacture 1993 | Cybelec DNC 880 | incl. tool package For sale is a robust hydraulic EHT folding press, type EHPS 15-35, manufactured in 1993. The folding press has a working length of 3,550 mm and a pressing force of 1,500 kN or approximately 150 t. It is equipped with a Cybelec DNC 880 control system. The scope of delivery includes a comprehensive package of upper and lower tools as well as special tools. Important note regarding the current condition: The machine can be started. However, an error appears during the initialization of the stops, which means that bending cannot be performed at the moment. The error needs to be bypassed or professionally repaired. After this error has been resolved, the machine should be operational again. Therefore, it is being sold explicitly as a used, repair-required industrial machine for restoration. The machine is in used condition, commensurate with its age. Signs of use, paint damage, and dirt are present; see pictures. Technical data: • Manufacturer: EHT Werkzeugmaschinen GmbH • Model / Type: EHPS 15-35 • Machine number: 208712 • Year of manufacture: 1993 • Pressing force: 1,500 kN / approx. 150 t • Working length: 3,550 mm • Control system: Cybelec DNC 880 • Oil quantity: 390 l • Power supply: 3~ • Frequency: 50 Hz • Operating voltage: 380 V • Control voltage: 220 / 24 V • Rated current: 50 A • Main fuse: 80 A • Electrical wiring diagram no.: 111002 Safety system: • System: Press safety system Starkstrom Gummersbach • Delay time: 66 ms • Delay distance: 9 mm • Safety distance: 105 mm Inspection / Collection: The machine is located in an industrial hall and can be inspected by appointment. Dismantling, loading, and transport will be arranged or carried out by the buyer. Assistance with organization can be offered if required. Sales note: No guarantee, no warranty, no returns. Subject to prior sale and errors. All technical specifications have been compiled to the best of our knowledge based on the nameplates and available information. Crsdpjzd Sc Ajfx Amasf

Condition: used, Year of construction: 1971, total length: 3,000 mm, total width: 2,000 mm, total height: 3,000 mm, Weight: 10.000 kg - Year: 1971 - Documentation available: No - CE certificate present: No Codpfeybdknsx Amasrf - Serial number: 20956 - Drive system: Teach-in - Press force [ton]: 150 - Max. working width [mm]: 3050 - Column gap [mm]: 2500 - Backgauge depth [mm]: 750 - Tools included: Yes - Transport dimensions: 3000mm x 2000mm x 3000mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 76820 € 1451.9 € 160 to 4050 mm Y1 / Y2 und X Achse 200 mm 3600 mm 300 mm 430 mm hydraulisch 160 mm/s 10 mm/s 140 mm/s 620 mm 250 mm/s 858 mm 104 mm 15 kW 4850 mm 1900 mm 2610 mm 10500 kg 3 axes (Y1, Y2, and X axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles CNC crowning table intermediate clamps for upper tool upper tool1010/A/75°/0,8, sectioned,bending radius hardened and ground die holder for 60 mm dies die type2009/85°(V 16, 22, 35, 50 mm)sectioned, geteilt, bending radiihardened and ground laser safety device Fiessler AKASmounted on the upper beam sheet support arms protection covers on the sides andback side according to CE rules oilfilling Crjdpfx Aewird Hsmajf users manual in GERMAN orENGLISH ADVANTGES OF PBF SERIES: - compact structure - low cost due to serial production of standardised models without restrictions in quality and accuracy OPTION: CNC controlled R-axis (adjustment range in X = 500 mm) DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) WE HAVE MORE THAN 600 REFERENCES! (sample photo)

Condition: good (used), Year of construction: 2005, machine/vehicle number: 7053055966, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 30 A, pressing force: 160 t, stroke length: 175 mm, table length: 4,050 mm, oil tank capacity: 150 l, total length: 5,000 mm, total width: 2,170 mm, total height: 2,800 mm, overall weight: 11,620 kg, Equipment: CE marking, documentation/manual, safety light barrier, The press brake would be available starting in October/November. Please feel free to contact us if you require any further information. Cjdpfszc H Apsx Amajrf

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Equipment: CE marking, documentation/manual, CNC control, with graphic display Pressing force: 175 tons Maximum bending length: 3000 mm Network connection Cedpfx Amozcg Rmsaorf 4-axis controlled Pressing force: 175 tons Maximum bending width can be up to 8 mm Automatically controlled table pre-tensioning

Condition: used, Year of construction: 1982, pressure:150 t chamfer lenght:3100 mm distance between columns:2700 mm total power requirement:15,0 kW weight of the machine ca.:10 t dimensions of the machine ca.:3,115 x 1,66 x 2,785 m throat:400 mm stroke:150 mm Credpfx Amoidrg Hjasf dayligth:450 mm

Condition: new, Year of construction: 2025, functionality: fully functional, Press force: 180 t Bending length: 3100 mm Distance between uprights: 3600 mm Control system: Cybelec CybTouch 15 Stroke: 250 mm Installation height: 470 mm Rapid traverse (down): 180 mm/s Crodpoy Tn Aasfx Amajf Bending speed: 0-10 mm/s Rapid traverse (up): 165 mm/s Total power consumption: 15 kW Machine weight (approx.): 12,500 kg Dimensions: 4000 x 2000 x 3030 mm Standard equipment: Basic equipment: • CNC control system Cybelec CybTouch 15 Windows • 4+1 axes: Y1-Y2-X-R-C • Mechanical crowning system: B-CM • Rear gauge system, model GHP-2 • Servo-driven main motor • Safety system: DSP AP+MCS • LED bar system • CE standard - Upper tool clamping system, PROMECAM, mechanical - Lower tool clamping system, PROMECAM, mechanical

Condition: ready for operation (used), Year of construction: 2009, pressing force: 163 t, stroke length: 180 mm, total height: 2,650 mm, overall weight: 11,500 kg, travel distance X-axis: 500 mm, product length (max.): 5,600 mm, number of axes: 3, This 3-axis UZMA HAP 40160 was manufactured in 2009. It features a bending force of 160 tons and a bending length of 4100 mm, providing robust capabilities for various applications. The machine includes a throat depth of 350 mm and a table height of 910 mm. If you are looking to get high-quality bending capabilities, consider the UZMA HAP 40160 hydraulic press brake we have for sale. Contact us for further details. • Technical specifications: • Distance between columns: 3100 mm • Daylight opening: 385 mm • Throat depth: 350 mm • Table height: 910 mm • Speeds: • Approach speed: 80 mm/sec • Working speed: 9 mm/sec • Return speed: 80 mm/sec Cjdpfxoy Tmlto Amaerf • Electrical data: • Main motor power: 15 kW • Voltage: 400 V • Number of phases: 3 phases • Frequency: 50 Hz • Overall full load current: 32 A • Axis movement: • X-axis movement distance: 500 mm • R-manual movement distance: 130 mm • Safety: • Minimum light curtain distance from tool center: 280 mm • Control: ELGO P8822 (NC Control) Technical Specification Bending Length 4100 mm

Condition: ready for operation (used), Year of construction: 2019, pressing force: 153 t, travel distance X-axis: 800 mm, This 6-axis HACO SRM30150 was manufactured in 2019. It features an 800 mm travel for the backgauge X-axis and includes manual quick clamping for upper tools. The machine is equipped with two support arms on linear guides and offers options for speed control and premium crowning. If you are looking to get high-quality bending capabilities, consider the HACO SRM30150 press brake we have for sale. Contact us for further details. - Control System: EasyBend-2D Graphical Control (103TFT)- Power Circuit: Star-delta connection- Backgauge: X-axis- Tool Clamping (Intermediate): Intermediate clamping for system tools- Upper Tool Clamping: Manual quick clamping for upper tools- Table Type: Table for system tools- Crowning: Manual crowning- Support Arms: 2 support arms, 750 mm on linear guide- Option - Speed Control: CE-Slow (Max. speed 10 mm/sec)- Option - Backgauge: X-R 800 mm travel path- Option - Premium Control: FastBend 2D Multi Touch Control with 18-inch screen- Option - Premium Crowning: Additional price for CNC Crowning Table with Single-V opening- Included Tools - Upper Tool 1: PS.134.30.R08 L=835 mm (4x)- Included Tools - Upper Tool 2: PS.134.30.R08 L=805 mm Sectioned/Segmented (1x)- Included Tools - Die 1: TMR100.40.30 L=500 mm (6x)- Included Tools - Die 2: Rolleri M.460.R L=835 mm (4x)- Included Tools - Die 3: M.460 R L=805 mm Sectioned/Segmented (1x)- Hydraulic Fluid Status: WITHOUT OIL FILLING- Machine Color: Light gray and dark gray, no cyan blue Technical Specification Cedpfx Amoy Tk S Doaerf Bending Length 3000 mm

Condition: excellent (used), Year of construction: 2000, Technical specifications: Working length: 4080 mm Distance between uprights: 3680 mm Press force: 170 tons CNC control: DELEM DA65 Number of controlled axes: 4 Controlled axes: Y1 / Y2; X; R Number of backstops: 4 Stroke: 365 mm Overhang: 410 mm Installation height: 535 mm Working height: 1050 mm Hydraulic tool clamping, top and bottom: WILA Pneumatic die shifting CNC-controlled crowning DSP laser monitoring (new) CE marking Motor power: 37 kW Dimensions (length x width x height): approx. 5650 x 2350 x 3100 mm Weight: approx. 18.5 tons Condition: Overall in good condition, retrofitted in 2026 Cedpozbugmofx Amaerf The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2024, Manufacturer: DURMA Type: AD-S 30175 Year of manufacture: 2020 Bending length: 3050 mm Press force: 1750 kN Control: CNC DT-15 Operating hours: 33 h Cjdped Srk Sofx Amasrf Bcq29blmc8 Controlled axes, back gauge: X, R Distance between uprights: 2600 mm Stroke length: 265 mm Installed height: 530 mm Table width: 104 mm Table height: 900 mm Upright overhang: 410 mm Travel range X-axis: 650 mm Travel speed X-axis: 250 mm/s Approach speed: 160 mm/s Bending speed: 10 mm/s Retraction speed: 100 mm/s Dimensions L/W/H: approx. 4250x1700x2750 mm Weight: approx. 11500 kg Standard equipment Y1, Y2, X=650 mm Control: CNC DT-15 European tool clamping system 60 mm die holder (for European die system only) 2 front-adjustable support arms with linear guide along the entire length Back gauge, servo motor Safety guards, side CE marking Additional equipment CE safety system with manual FIESSLER AKAS II M-FPSC Controlled axes X, R-axis, Z-axes adjustable manually CNC-controlled motorized crowning European upper and lower tools from Rolleri The machine can be inspected and demonstrated at any time in our showroom in Staufenberg, by prior appointment. Other machines are available for demonstration at our facility in Staufenberg. Upon request, we will be happy to provide you with further information.

Year of construction: 2024, condition: new, The DA-69T control system offers both 2D and 3D programming, which includes automatic calculation of the bending sequence and collision detection. The complete 3D machine setup includes multiple tool stations and provides immediate feedback on the feasibility and handling of the product. Delem-69T features: • 3D and 2D graphical touchscreen programming • 3D representation in simulation and production • 17-inch TFT color display with high resolution • Complete Windows Application Suite • Compatible with Delem Modusys (modular scalability and adaptability) • USB, peripheral interface • Open system architecture • Sensor-based bending and correction interface • Profile-T3D offline software • Significant contribution to environmental protection; climate change and the greenhouse effect will thank us, as will future generations! Crsdpsd Tpadsfx Amaof AD-S 30175 with Y1, Y2, X, and R axes Bending force: 175 tons Bending length: 3050 mm Distance between stands: 2600 mm Rapid traverse speed: 120 mm/sec Working speed: 10 mm/sec Return speed: 100 mm/sec Installation height for tool clearance and the penetration depth of your press brake: 30 mm Table width: 104 mm Table height: 900 mm Stroke: 265 mm Overhang: 410 mm Support arms: 2 pcs Backstops: 2 pcs Press force and speed of the press brake. X-axis: 500 mm/sec X-axis travel direction: 650 mm Speed of the R-axis max.: 350 mm/sec R-axis travel direction: 250 mm Motor power: 18.5 kW Oil tank capacity: 250 liters Length: 4250 mm Width: 1700 mm Height: 2750 mm Weight approx. 11500 kg Control system: Delem-69 T Options: Y1, Y2, X, R (4 axes) X=650mm X, R Control system - CNC Cybelec ModEva 19T DBEND 3D CAD/CAM import & simulation program CNC-controlled motorized crowning Adjustable front support arms with T-slot, clip stop, and guide along the entire line Rear stop: Siemens DC servo motor & linear guide & ball screw system Protective cover CE standard with manual Fiessler AKAS II M - FPSC-B-C (SAFETY PLC) Wila Hyd. top - NSCL-I-HC/UPB - PRO - Max load 180 t/m - Power pack required Wila Hyd. bottom - NSCR-I-HC-CNC/UPB - PRO - Max load 200 t/m - Power pack required Power pack for hydraulic clamping DAM (Durma angle measuring system) 2 YEAR WARRANTY The machine can be inspected and demonstrated at any time by appointment at our showroom in Staufenberg. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will gladly provide you with further information.

Year of construction: 2024, operating hours: 32 h, condition: new, Manufacturer: DURMA Model: AD-S 30175 Year of manufacture: 2020* Bending length: 3050 mm Press force: 1750 kN Control system: DELEM DA-66T Operating hours: 32 h Controlled axes, back gauge: X, R, Z1, Z2, +Delta X +/- 125 mm, CNC-controlled Distance between uprights: 2600 mm Stroke length: 265 mm Crjdodx Nlujpfx Amaof Installation height: 530 mm Table width: 104 mm Table height: 900 mm Upright overhang: 410 mm Travel range, X-axis: 650 mm Travel speed, X-axis: 500 mm/s Travel range, R-axis: 250 mm Approach speed: 160 mm/s Bending speed: 10 mm/s Retraction speed: 100 mm/s Dimensions L/W/H: approx. 4250x1700x2750 mm Weight: approx. 11500 kg Standard equipment Y1, Y2, X, R – X = 650 mm Control system: CNC Cybelec ModEva 19T – PC 1200 3D SW D-BEND 3D CAD/CAM import & simulation program CNC-controlled motorized crowning European tool clamping system 60 mm die holder (for European die system only) Overhang 410 mm 2 front-adjustable support arms with T-slot and tilting stop Back gauge system: Siemens DC servo motor with linear guide and ball screw spindle Protective covers CE marking Additional equipment Safety system, CE standard for EU: FIESSLER AKAS-3P motorized + FPSC (SAFETY PLC) Controlled axes, back gauge: X, R, Z1, Z2, +Delta X +/- 125 mm, CNC-controlled Control system: DELEM DA-66T Hydraulic upper tool clamping system Wila NSCL-II-HC/UPB – PREMIUM – 250 t/m Hydraulic lower tool clamping system Wila NSCR-II-HC-CNC/UPB – PREMIUM – 300 t/m Power pack for hydraulic clamping AP3-AP4 bending aid - motorized height adjustment - max. load capacity 125 kg per piece Oil cooler This machine is manufactured according to customer requirements. Further machines are available for demonstration at our location in Staufenberg. Upon request, we will gladly provide you with further information.

Year of construction: 2024, operating hours: 33 h, condition: new, Machine dimensions: • (L x W x H): 4,250 mm x 1,700 mm x 2,750 mm Technical data: Bending length: 3,050 mm Free stand clearance: 2,600 mm Control system: CNC ModEva 19T Controlled axes, back gauge: X, R (Z, optional) Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Stand overhang: 410 mm Travel range X-axis: 650 mm Travel speed: X-axis: 500 mm/s Approach speed (Y): 160 mm/s Bending speed (Y): 10 mm/s Working speed (R): 350 mm/s Travel range R-axis: 250 mm Hydraulic oil volume: 200 l Motor power: 18.5 kW Weight: approx. 10,500 kg Standard equipment: Control system: Cybelec ModEva 19T CNC-controlled crowning Clamping system, top: Durma (European) Clamping system, bottom: 60 mm - holder Back gauge: AC servo motors with ball screw Codsdx Nm Tjpfx Amasrf Options include: Fiesseler safety system AKAS II - FPSC-B-C Top tool, bent: P97.75.R08 (one with a split) Bottom tool, multi-die (die widths 16/22/35/50 mm) The machine can be inspected and demonstrated at our showroom in Staufenberg at any time by appointment. Other machines are available for demonstration at our facility in Staufenberg. Upon request, we will be happy to provide you with further information.

Condition: good (used), Year of construction: 2005, power: 15 kW (20.39 HP), operating speed: 10 mm/s, total length: 4,000 mm, total width: 2,000 mm, total height: 3,000 mm, overall weight: 11,500 kg, controller manufacturer: Delem DA65, working width: 3,100 mm, bending force (max.): 175 t, distance between stands: 2,550 mm, control type: CNC control, number of axes: 5, Max. bending length: 3100mm Crodpsyvz H Rofx Amaof Distance between column: 2550mm Max. pressing force: 175T Beam stroke: 225mm Table Width: 150mm Troth beam: 400mm Approch speed: 100mm/min. Working speed: 10mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: 5 Control: yes Crowning: yes Hydraulic toolclamping: yes Power: 15kW Length: 4000mm Width: 2000mm Height: 3000mm Weight: 11500kg

Condition: used, Year of construction: 1987, pressure 160 t chamfer lenght 4000 mm distance between columns 3060 mm control FORTRON CNC 10 H 4 throat 280 mm stroke 250 mm dayligth 500 mm table length 4050 mm table width 280 mm feed down 70 mm/sec feed up 68,4 mm/sec Crodpotqqr Rjfx Amasf working feed 9 / 3,5 mm/sec operating pressure max. 205 bar oil volume 400 l total power requirement 19,5 kW weight of the machine ca. 20,8 t Total weight including accessories 22 t dimensions of machine L x W x H 4,8 x 1,88 x 2,93 m dimensions of switch cabinet 1,6 x 0,5 x 2,25 m - 3-axis machine - Acc.: programmable back gauge, upper and lower dies, table extensions

Condition: used, Year of construction: 2020, operating hours: 2,018 h, total length: 4,000 mm, total width: 2,300 mm, total height: 2,850 mm, Colour: Grey Weight: 10.520 kg Crodpfx Amsyypfioasf Price: On request - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 73332015912 - Operating hours: 2018 - Drive system: CNC - Power [kW]: 18.5 - Press force [ton]: 175 - Max. working width [mm]: 3100 - Column gap [mm]: 2500 - Backgauge depth [mm]: 600 - Max. stroke [mm]: 195 - Tools included: Yes - Transport dimensions: 4000mm x 2300mm x 2850mm (l x w x h) - Transport weight [kg]: 10520kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1994, functionality: fully functional, Pressure: 160 t Bending length: 3,200 mm Control unit: CYBELEC CybTouch 15 PS Machine weight approx.: 14,000 kg Accessories/Equipment: - Control unit retrofit March 2025 – CYBELEC CybTouch 15 - Foot switch - Tools Crsdpfxsxb Sm No Amasf

Condition: new, Year of construction: 2024, functionality: fully functional, working width: 3,100 mm, distance between stands: 2,600 mm, warranty duration: 24 months, control type: CNC control, degree of automation: automatic, number of support arms: 2, type of crowning: CNC-controlled, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, safety light barrier, Immediately available, highly upgraded CNC press brake YAWEI PBH160/3100-4C - Pressing force: 1600KN - max. bending length: 3100mm - Year of construction 2024 - CNC controlled hydraulic crowning Credpoyvzhnjfx Amaof - DELEM DA66S - 4 CNC controlled axes - Y1/Y2, X, R - Mechanical quick clamping upper tools type Amada - 60mm table with 13.5mm x 22mm groove for insertion dies - 2 front support arms can be moved on linear guides - CE with Fiessler AKAS IIF (automatic height adjustment) - 24 month guarantee - Commissioning, training

Condition: ready for operation (used), Year of construction: 2022, pressing force: 178 t, stroke length: 265 mm, total width: 1,900 mm, total height: 2,930 mm, overall weight: 12,750 kg, product length (max.): 5,200 mm, number of axes: 3, This 3-axis Durma AD-R 40175 was manufactured in 2022. It features a bending length of 4,050 mm and a bending force of 175 tons, providing robust capabilities for various applications. The machine is equipped with a DURMA DT15 CNC control system and a 3D touch screen interface for enhanced usability. If you are looking to get high-quality bending capabilities, consider the Durma AD-R 40175 press brake we have for sale. Contact us for further details. • Distance between uprights: 3,600 mm • CNC control: DURMA DT15 (3D touch screen interface) Technical Specification Csdpfxjy E Nfyj Amasrf Bending Length 4050 mm

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, pressing force: 150 t, stroke length: 415 mm, throat depth: 400 mm, clearance between the columns: 2,600 mm, working range: 3,100 mm, The hydraulic system has been completely overhauled; the cylinders were removed and reconditioned, and seals, oil, and filters were replaced. New light barriers were installed, the CNC control unit was tested, and the machine was repainted. TECHNICAL DETAILS Press force: 150 t Bending length: 3,100 mm Throat depth: 400 mm Distance between uprights: 2,600 mm Stroke: 415 mm Axes: Y1 - Y2 - X - R - Z1 - Z2 MACHINE DETAILS Control unit: CYBELEC DNC 900 Motor power: 15 kW Cjdpsy D Ih Rsfx Amasrf Dimensions & Weight Overall dimensions (L x W x H): 4,000 x 2,400 x 3,200 mm Machine weight: 12,800 kg EQUIPMENT Hydraulic tool clamping Hydraulic crowning

Condition: new, Year of construction: 2026, machine/vehicle number: Bull15_2, functionality: fully functional, Electric press brake Bull15 with spindle drive CoastOne - Made in Finland New machine Pressing force: 150t Bending length: 1600mm Controlled axes: X-R axis (2x manual stop fingers) Standard type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touchscreen Optional: - 4 or 5-axis backgauge system - Lazersafe light barrier system standard Codpfxsy A Nlne Amaorf - Lazersafe IRIS light barrier system - Lazersafe IRIS + light barrier system angle measuring system - extra screen with 3D bending software - support table - Front and rear lights - WILA / Trumpf / Type B - tool holder system - 2 sheet followers 36 months warranty after installation

Condition: new, Year of construction: 2026, machine/vehicle number: G40_2, functionality: fully functional, Electromechanical CNC press Manufacturer: CoastOne Oy Type: Cone G40 Pressing force: 1500 kN Cjdjy A Nlbspfx Amaerf Bending spindles: 6 Controlled axes: X-R axis (2x manual stop fingers) Standard Type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touch screen Options: - 4 or 5 axis backgauge system - Lazersafe light barrier system standard Cbgdzvzgpj - Lazersafe IRIS light barrier system - Lazersafe IRIS+ light barrier system angle measuring system - extra screen with 3D bending software - support table - Light front and rear - WILA / Trumpf / Type B - tool holder system - 2x bending aids 36 months warranty after installation