Used press brakes with 150-199t bending force for sale (157)

Condition: used, Year of construction: 1983, pressure 180 t chamfer lenght 3050 mm distance between columns 2550 mm throat 250 mm stroke 150 mm return speed 65 mm/sec Dodpewa Dyzefx Abgsck ajustment speed 50 mm/sec work height max. 1010 mm oil volume 150 l total power requirement 11 kW weight of the machine ca. 9500 kg dimensions 3100 x 1750 x 2850 mm Equipment: - Controlled axes: Y1, Y2, X - Electric rear stop, adjustable from the front * Fine adjustment via hand crank* - 2 front support arms - Upper tool - Lower tool = die block - Rear + side safety device - Foot control

Condition: used, pressure 150 t chamfer lenght 4300 mm distance between columns 3700 mm ram stroke speed 100 mm/sec working feed 8 mm/sec return speed 80 mm/sec stroke 175 mm table height 920 mm Control DELEM DA 52 total power requirement 11 kW weight of the machine ca. 15000 kg Dcedpev S Irysfx Abgek dimensions of the machine ca. 4800 x 1700 x 2850 mm Equipment: - Controlled axes Y1 - Y2 - X, as well as CNC crowning - DELEM DA52 CNC control - Electric backgauge (X-axis) - 4x manually adjustable stop fingers - 2x front support arms - AMADA UKB system upper tool holder - Side guard - Foot switch

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, stroke length: 240 mm, throat depth: 300 mm, controller model: CYBELEC DNC 880S, bending force (max.): 175 t, distance between stands: 3,050 mm, TECHNICAL DETAILS Pressing force: 175 t Bending length: 4,050 mm Distance between uprights: 3,050 mm Throat depth: 300 mm Stroke: 240 mm Stroke speed (down, unloaded) max.: 140 mm/s Working speed max.: 9 mm/s Stroke speed (return) max.: 130 mm/s Distance table/punch min.: 370 mm Distance table/punch max.: 610 mm MACHINE DETAILS Control: CYBELEC DNC 880S Dsdpfjygw Ahex Abgeck Total power requirement: 15 kW Controlled axes: Y1, Y2, X, R Dimensions & Weight Space requirement: approx. 5.89 x 3.6 x 3.16 m Machine weight: approx. 15 t EQUIPMENT CNC crowning 4x backgauge fingers (manually adjustable) Foot switch 1 set of upper tooling 1 set of lower tooling 2x front sheet supports Side and rear safety guards Operating manual

Condition: used, Year of construction: 1973, pressure 200 t chamfer lenght 3600 mm distance between columns 2650 mm dayligth 500 mm throat 300 mm stroke 250 mm working feed 10,5 mm/sec return speed 100 mm/sec ram stroke speed 150 mm/sec table height 900 mm oil volume 500 l Djdot I D U Eepfx Abgjck total power requirement 37 kW weight of the machine ca. 17800 kg dimensions of the machine ca. 3710 x 1800 x 3390 mm Equipment: - Controlled axes Y1 + Y2 - Manual X-axis with digital position display - Set of upper and lower tools - 2x stop fingers - 2x front support arms - Hand and foot controls - Side + rear safety guard - Operating instructions

Condition: new, pressure 175 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 12.0 mm/min return speed 190 mm/sec work stroke 275 mm dayligth 550 mm oil volume 300 ltr. table height 900 mm table width 90.0 mm voltage 400 Volt Djdpfx Aboxabfxsgjck total power requirement 15.0 kW weight 9800 kg range L-W-H 4150 x 2150 x 2800 mm ----- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection ----- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Split universal die block M 460 R, including die shoe C 1050-R - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Condition: new, pressure 175 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 180 mm/sec return speed 135 mm/sec work speed 10,0 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 90,0 mm oil volume 200 ltr. voltage 400 Volt total power requirement 15,0 kW weight 11.950 kg range L-W-H 5100 x 2150 x 2850 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen * 2D graphic programming Djdpfjxabapox Abgeck * 15 "high definition color TFT screen * Bending sequence calculation * Product programming and display in real size * USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Condition: new, pressure 160 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 250 mm ram stroke speed 90.0 mm/sec work speed 7.5 mm/sec return speed 80.0 mm/sec work stroke 160 mm dayligth 395 mm table height 900 mm back stop - adjustable max. 800 mm oil volume 200 ltr. voltage 400 Volt total power requirement 11.0 kW weight 7524 kg range L-W-H 4250 x 1900 x 2550 mm Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - controlled axes : Y1 - Y2 and X - manual table crowning - AKAS - laser protection device f. d. machine - Upper tool, deer foot - Lower tool, die block with 4V's - Light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH/HOERBIGER hydraulic system Dedpfx Abjxab Hiogeck - CE mark/Declaration of Conformity - Operating manual : machine and control - Safety manual : press brakes

Condition: used, Year of construction: 2008, pressure 180 t chamfer lenght 3110 mm distance between columns 2600 mm column arm 410 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec back stop - adjustable max. 750 mm stroke 260 mm dayligth 460 mm table height 880 mm oil volume 210 ltr. operating pressure max. 240 bar control DELEM total power requirement 15.0 kW weight of the machine ca. 11.200 kg. range L-W-H 4250 x 2000 x 2800 mm Current new price approx. 85.000 euros Special price on request Features: - Electro-hydraulic CNC press brake - With DELEM CNC control model “DA 66W” * 2D graphic programming * Automatic bend sequence calculation and collision detection Dcedexa Hivopfx Abgek * High-quality LCD screen (TFT) * Swivel control panel, front left - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning - CNC electric motor-driven backgauge (X axis) * with 2x manually adjustable stop fingers - CNC electric motor height adjustment of the backgauge (R axis) - CNC electric motor table crowning - ROLLERI upper tool adapter (quick-change clamping) * including crowning device in the tool holder - 2x front, sliding support arms (“sliding” system) - Side guard (swivel doors) - Rear guard (sliding door) - 1x freely movable 2-hand/foot control - Operating instructions (PDF)

Condition: new, pressure 135 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 200 mm/sec work speed 12.0 mm/sec return speed 190 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm oil volume 300 ltr. voltage 400 Volt total power requirement 15.0 kW weight 10800 kg range L-W-H 5100 x 2100 x 2850 mm ----- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection ----- Dcjdpfsxaa U Eex Abgok Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Split universal die block M 460 R, including die shoe C 1050-R - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication

Condition: new, pressure 160 t chamfer lenght 3760 mm distance between columns 3250 mm column arm 250 mm ram stroke speed 90.0 mm/sec work speed 7.5 mm/min return speed 80.0 mm/sec work stroke 160 mm dayligth 395 mm Dcsdpfsxabb Tsx Abgek table height 900 mm oil volume 200 ltr. voltage 400 Volt weight 8514 kg range L-W-H 4910 x 1900 x 2550 mm Furnishing: - DELEM - CNC control model DA-58T - controlled axes: Y1 - Y2 and X - SICK light barrier in front of the machine - Upper tool, deer foot - Lower tool, die block with 4Vs - manual table crowning - SICK light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH / HOERBIGER hydraulic system - CE mark / declaration of conformity - Operating manual: machine and control - Safety manual: press brakes

Condition: new, pressure 175 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 12.0 mm/sec return speed 190 mm/sec work stroke 275 mm dayligth 550 mm oil volume 300 ltr. table height 900 mm table width 90.0 mm voltage 400 Volt total power requirement 15.0 kW weight 12100 kg range L-W-H 5.100x2.150x2.850 mm ----- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection ----- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Split universal die block M 460 R, including die shoe C 1050-R - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German Dodpfx Aoxaah Sobgock - Safety manual: press brakes

Condition: excellent (used), Year of construction: 1997, pressure 170 t chamfer lenght 4080 mm distance between columns 3680 mm column arm 410 mm dayligth 385 mm stroke 215 mm ajustment speed 200 mm/sec working feed 1-10 mm/sec return speed 135 mm/sec table width 200 mm table height 1050 mm Number of working hours 25.430 h oil volume 350 l total power requirement 29 KVA weight of the machine ca. 16.450 kg. range L-W-H 4620 x 2210 x 2885 mm Machine in good condition Regularly serviced by the manufacturer CNC backgauge with 8 axes (!!) - in checked conditions - machinevideo - ?v=yEaRj0XJAC4 Equipment: - CNC electro-hydraulic press brake/die bending press - DELEM CNC control - swiveling front left * High-resolution graphic screen * Clear, concise menus in the operator's language * Large tool and product library * Graphic 2D programming * Automatic bend sequence calculation and collision detection * Emergency stop button at front - CNC axis adjustment: * Y1 - Y2 - X1 - X2 - R1 - R2 - Z1 - Z2 axis + CNC crowning - X axis - adjustment speed: 500 mm/sec. * Max. stop range: 860 mm - R axis - Adjustment speed: 300 mm/sec. Dcedpfx Aoxcp Rbsbgjk * Max. travel: 250 mm - Z axis - Adjustment speed: 1000 mm/sec. * Max. travel: 3260 mm - CNC electric motor table crowning - CNC electro-pneumatic die shift (I axis) - WILA / TRUMPF upper tool clamping - hydraulic - WILA / TRUMPF lower tool clamping - hydraulic - 2x front, robust support arms - movable - 1x freely movable 2-hand/foot control - 1x freely movable foot switch - Side safety device (swivel doors) - Rear safety device (sliding doors) - Original operating instructions

Year of construction: 2006, condition: good (used), functionality: fully functional, machine/vehicle number: 138883, TECHNICAL DETAILS Press force: 160 t Bending length: 4100 mm Distance between uprights: 3100 mm Dcsdpfx Abjlp Iq Rsgjk Control system: DELEM DA66W Table width: 120 mm Stroke: max. 800 mm Downstroke speed: 80 mm/sec Upstroke speed: 80 mm/sec Speed under load: 8 mm/sec MACHINE DETAILS Oil capacity: 185 l Total power consumption: 24 kW Machine weight: approx. 13 t Space requirement: approx. 4.8 x 2.2 x 2.2 m

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, controller model: Cybelec DNC 800, bending force (max.): 175 t, distance between stands: 2,550 mm, working length: 3,050 mm, TECHNICAL DETAILS Press force: 175 t Bending length: 3,050 mm Frame gap: 2,550 mm MACHINE DETAILS Control unit: Cybelec DNC 800 Total power requirement: 15 kW Oil capacity: 300 l EQUIPMENT 2 support arms in front of the machine Pneumatic tool clamping Crowning system Controlled axes: y1, y2, x, R 2 manually adjustable backgauge fingers Two-hand foot operation Dedpfjyhmc Tox Abgjck Side safety doors Punch tools Segmented V-dies

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, controller model: Cybelec ModEva 10S, empty load weight: 16,300 kg, bending force (max.): 170 t, working length: 4,050 mm, TECHNICAL DETAILS Press force: 170 t Bending length: 4,050 mm MACHINE DETAILS Control: Cybelec ModEva 10S Machine weight: 16,300 kg Dcsdpfx Asxwnv Esbgek EQUIPMENT Lasersafe 2 sheet supports Die shifting Crowning Pneumatic tool clamping top and bottom Controlled axes: Y1, Y2, X, R, Z1, Z2 Tool cabinet with tools

Condition: used, Year of construction: 2005, operating hours: 34,000 h, pressure 170 t chamfer lenght 3050 mm distance between columns 2700 mm Stroke beam 300 mm 520 mm 350 mm Quick speed,inspeed 150 mm/sec Dsdpsru Rz Sjfx Abgjck bendingspeed 0-10 mm/sec opening speed 150 mm/sec 600/1000 mm 200 mm Z1+Z2 axes controlled by cnc 0-2500 mm Number of working hours 34000 h Dimensions of machine: length 3600 mm width 1950 mm height 3300 mm weight 12000 kg Control Cadmann total power requirement 24 kW dimensions of the machine ca. 4x2x3,3 m

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 9,874 h, stroke length: 600 mm, throat depth: 420 mm, working width: 4,250 mm, bending force (max.): 173 t, TECHNICAL DETAILS Press force: 1,700 kN Working width: 4,250 mm Stroke: 600 mm Dcodpfxex R S S Hs Abgjk MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,700 x 3,000 mm Total weight: 16,000 kg Control type: CNC-controlled Press beam operating hours: 9,874 h EQUIPMENT 5-axis backgauge Hydraulic tool clamping (top/bottom) Die adjustment for bending CNC-controlled bending aid Bendguard safety system ACB angle measurement sensor Note: The machine is sold without tooling.

Condition: used, Year of construction: 2016, machine/vehicle number: 24398, functionality: unexamined, controller manufacturer: Cybelec, controller model: Modeva Pac 15, control type: CNC control, Used Cybelec Modeva Pac 15 controller for press brake, max 7 axes. Dcodpfx Aex Dh U Ijbgok

Condition: new, MODEL Unit GENIUS PRO B32.220 (220 tons x 3200mm) CNC Control Axis Y1 ,Y2 ,X, R-axis with Crowning Bending force Ton 220 Bending length mm 3200 Positioning accuracy etc. 0.005 Distance between columns mm 2700 Dedpswpuftofx Abgsck Bending Accuracy Degree ±2'/Per meter Beam Stroke mm 200 Daylight mm 460 Throat Depth mm 750 Table width mm 120 Working table height mm 1025 WORKING SPEED: ACCURL® EVO-GO HYBRID SERVO SYSTEM Rapid Speed mm/sec 180 Work Speed mm/sec 0~15 Return Speed mm/sec 160 REAR GAUGE: Max Travel X-Axis mm 800 Max Travel R-Axis mm 250 Max Travel Z-Axis etc 3550 CAPACITY: Hydraulic pressure Bar 275 Hybrid Servo Motor KW 18.5 Ambient temperature range °C 0 bis To +40 Overall dimensions mm 3950×2050×2950 Machine weight Kgs 12200 Power supply AC 220V~480V, 3ph, 50/60HZ

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3216-N Estun E21 Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 11.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2500 mm - Weight: 8800.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - Type of punch holder: AMADA quick-action clamping E21 controller (Mounted on a swivel arm) - Controls X (backgauge) and Y (ram) axes Dsdeh Ranpspfx Abgjck - Allows the creation of up to 40 programmes - Each programme may consist of 25 steps - Intuitive operation through the use of English abbreviations, which are explained during training It is a sophisticated but easy-to-use controller that allows operation in three modes: - Manual - Single automatic - Serial automatic Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3216-CNC Delem DA-58T Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 11.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2500 mm - Weight: 8700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist Dcjdpfx Absgih Iujgsk We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-3116-PRO DA-66T Specifications - Nominal bending force: 1600 kN - Motor power output: 15.0 kW - Approach speed: 160 mm/s - Bending speed: 10 mm/s - Return speed: 130 mm/s - Weight: 9700.0 kg - Oil tank: 210 l - Maximum bending length: 3100 mm - Distance between side frames: 2550 mm - Ram width: 1600 mm - Table height: 880 mm - Daylight: 540 mm - Maximum stroke: 260 mm - Table width: 60 mm - Throat depth: 410 mm Tools - Servo-driven automatic backgauge on linear guides. 2 pcs. - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram control (Y axis): Y1/Y2 independently controlled with servo drives. - Punch quick change tooling system form AMADA DA-66T control - Capable of programming in 2D and 3D - 3D visualization for preview and operation - 17-inch color TFT screen of high resolution - Full Windows operating software - Compatibility with Modusys Delem system (modular scaling and adaptability) - External USB port - Detailed user support in a multitasking environment - Sensor bending with parameter correction menu - Profile-T3D software that works offline Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, every machine purchase includes a specialist support package with hours of expert guidance. Within the service, our technicians may: Dcsdpju T H Iqefx Abgok - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Financing We assist Customers interested in financing Otinus machines in obtaining the necessary funds. We also encourage you to take advantage of our advisory services. We work with various banks to select a lease or loan offer that best suits your needs. Included in the price 2-day training including machine installation 1 day to 8 hours—machine installation and training 2 day up to 8 hours—independent work on the machine with the assistance of an Otinus technician with possibility of making specific parts used by the Customer—1 day to 8 hours Telephone consultation with an Otinus specialist—8-hour package from 7:30 a.m. to 9:00 p.m.—8-hour support package valid for 12 months. Terms of cooperation 24-month warranty Lead time: 6-8 weeks Not applicable if a machine is immediately available. The machine is brand new. Warranty and post-warranty service provided by the seller. The Customer is responsible for the machine during unloading and transport within their facility.

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-4016-CNC OT-41 Specifications - Nominal pressure: 1600 kN - Max working length 4000 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 3200 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 4100 mm - Width: 1650 mm - Height: 2600 mm - Weight: 10000.0 kg Djdsh Ia Tropfx Abgock Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, pressing force: 150 t, operating speed: 90 mm/s, reverse speed: 90 mm/s, table height: 1,000 mm, throat depth: 1,000 mm, total length: 4,500 mm, total width: 1,820 mm, total height: 2,850 mm, overall weight: 16,000 kg, travel distance X-axis: 1,000 mm, controller manufacturer: Lenze, controller model: 9300, working width: 3,060 mm, bending force (max.): 150 t, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 3,200 mm, warranty duration: 6 months, control type: CNC control, back gauge adjustment: motor-driven, number of axes: 7, actuation type: electric, Equipment: safety light barrier, Safan on the market: Safan H-Brake 150T – 3100 mm press brake. This machine is equipped with a conventional hydraulic drive, renowned for its exceptional lifespan and reliability. This is why these models are so popular on the used machinery market. The chromed pistons and the application of specially selected, high-quality piston seals ensure long-lasting performance of these components. In cooperation with Schneider Hydraulics, servo valves have been developed to provide precise control of the ram’s descent and return stroke. The machine is equipped with full CNC-controlled axes and Wila hydraulic clamps, allowing for a wide range of bending applications and easy retooling. Safan E-Brake 150-3100, year of manufacture: 2010 - Safan TS 1 controller Dsdpoxr Uq Sefx Abgock - 2D bending system - 17'' color touchscreen monitor - Operator panel on a swiveling arm - CNC-controlled Y1/Y2 axes - CNC-controlled X-axis - CNC-controlled R-axis - CNC-controlled Z1+Z2 axes - CNC-controlled delta X axis - Wila® upper tool adapter (mechanical clamping), hardened - Wila® lower tool table - Lightguard safety with upper beam descent control option - Work area illumination at the front and rear of the machine - Electrical installation: 3/N/PE, 50 Hz, 400/230 V - Opening: 690 mm - Table length: 3060 mm - Distance between machine frames: 3300 mm

Year of construction: 1993, condition: used, Chamfer lenght: 3.000 mm Stands passage: 2.750 mm Max. pressure: 180 t Control: CYBELEC DNC 70 Stroke: 220 mm Total power: 15 kW Weight of the machine: 11.000 kg Dedpfx Ajkh Niqsbgock