Condition: new, Year of construction: 2025, Technical data: usable working width 520 mm Hodon Sm Tiopfx Ag Uon total table length 2310 mm cutter block diameter 120 mm cutterblock speed 5000 rpm 4 knives 35x3x520 mm aluminum dressing fence 1200x190 mm planing fence inclination from 90° to 45 min./max. planing height 3 / 250 mm feed speed thickness 5-8-12-18 m/min. Suction stroke diameter dressing 120 mm Suction hood diameter thickness 120 mm Standard equipment: - Work table adjustment in the infeed by means of parallelogram system, indication for chip removal by degree scale. - simultaneous height adjustment and locking of work tables complete with anti-tilt device - quick changeover system to switch from dressing to thicknessing operations (CE version) by means of a special support for opening the dressing tables and an automatic pneumatic positioning system of the suction hood, with hydraulic support - "READY" electronic control includes: - Adjustment of the thicknessing table - Manual, semi-automatic and automatic mode with 99 storable working programs - Additional functions: Calculator and hour meter - machine table with height adjustment by 4 steel threaded spindles - rubber-coated feed roller at the outlet - exchangeable feed rollers - link pressure shoes in the infeed - planing shaft and setting gauge for planing knives incl. the following special accessories: "TERSA" cutterblock with one-way reversible knives, swivelling auxiliary fence

Condition: like new (used), Paoloni Planer-Thicknesser 515, 7.5 hp. Hodpfx Asy T Snasg Uen

Condition: used, Stress line and finger joint line capable of producing lengths up to 13 m, which is the maximum length the planer line can handle. This can be sold in two different packages: either the stress line and finger joint line together, or the planer line separately. Hsdpfx Ajzaazgjg Uen For more information, please contact us.

Condition: excellent (used), CATALOG NUMBER 7679 TECHNICAL DATA - Maximum planing width: 610 mm - Maximum planing height, double-sided: 200 mm - Electrically adjustable table height (up/down) - Maximum planing height, four-sided: 100 mm Top section: - Driven infeed shaft, toothed - Kickback devices - Pressure unit - 2 driven shafts, toothed - Pressure unit - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure unit - Outfeed driven shaft, smooth Bottom section: - Guide bar - Driven roller, toothed - 610 mm planing shaft, 4-knife, 5.5 kW - 2 smooth driven rollers Hsdey T Rhxopfx Ag Uen Rear section: - 2 side spindles with pressure unit 1) Right vertical, 100 mm, 4 kW 2) Left vertical, 100 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable vertically and horizontally - Manual planing width adjustment - 6 feed rates: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Dimensions (L/W/H): 2500 x 1800 x 600 mm - Weight: approx. 3000 kg FEATURES - Perfect for log, flooring, and similar applications - Manufactured by German brand KUPFERMUHLE - 2 horizontal planing shafts + 2 vertical spindles - Used planer, in very good condition Net price: 56,900 PLN Net price: 13,550 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7641 TECHNICAL DATA - Max. planing width: 800 mm - Max. planing height: 200 mm - Upper section: - Pull-in feed roller, toothed - Pawls - Pressure unit Hodpfx Agsy T Rgzo Uon - 2 feed rollers, toothed - Pressure unit - Planing shaft 800 mm, 4-knife, 7.5 kW - Pressure units - Profiling shaft 800 mm, 4-knife (fitted with 3 straight knives, 1 profiling knife) - Pressure unit - Outfeed roller, smooth - Lower section: - Guide rail - Infeed table - Feed roller, smooth - Planing shaft 800 mm, 4-knife, 7.5 kW - 2 feed rollers, smooth - Smooth, split running roller - Side pressure at outfeed - Rear section: - 2 side spindles + pressure units: 1) Right vertical 90 mm, 4 kW 2) Left vertical 90 mm, 4 kW - Spindle diameter: 35 mm - Spindles arranged alternately - Spindles adjustable up/down, right/left 3) Additional lower horizontal spindle, 350 mm, adjustable up/down + right/left, 5.5 kW - Spindle diameter: 40 mm - Outfeed: 4 upper metal sliding rollers, 2 lower feed rollers, rubber-coated - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 7/14/9/18/11.5/23 m/min - Feed motor: 2.2 kW - Extraction outlet diameters: 3×180, 130 mm - Dimensions (L×W×H): 3100×2000×1900 mm - Weight: approx. 3,500 kg ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing beams, flooring, etc. – 3 planing shafts + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer in very good condition Net price: 64,900 PLN Net price: 15,450 EUR (based on an exchange rate of 4.2 EUR) (Prices may change with significant currency fluctuations)

Condition: excellent (used), Catalogue no. 6815 TECHNICAL DATA - shaft width: 640 mm - number of knives: 4 pcs - max workpiece thickness: 230 mm top side: - toothed feed shaft, driven, sequential - pressure rollers - planing shaft Hsdsy T Rf Rjpfx Ag Ujn - pressure rollers - smooth outfeed shaft, driven bottom side: - feed roller + infeed table - adjustable roller in lower table - outfeed table + roller - main motor: 5.5 kW - stepless feed speed adjustment - feed motor: 0.5 kW - extraction port diameter: 150 mm - dimensions (LxWxH): 1630x1630x1140 mm - weight: 920 kg FEATURES - Italian-made - used thickness planer, in very good condition Net price: 17,900 PLN Net price: 4,260 EUR Net price calculated at 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 6935 TECHNICAL DATA - Shaft width: 630mm - Number of knives: 4 pcs - Max. thickness of workpiece: 210mm * Top section: - Anti-kickback fingers - Serrated feed roller, driven - Pressure bars - Planing shaft - Pressure bars - Smooth outfeed roller, driven * Bottom section: - Adjustable rollers on the lower table: 2 pcs - Motor: 4.4kW - 2 feed speeds Hedpoy T Rfwsfx Ag Uen - Dimensions (L/W/H): 1220x950x1060mm - Weight: 750kg ADVANTAGES – Made in Germany – Used thickness planer, very good condition Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may vary in case of significant currency fluctuations)

Condition: excellent (used), CATALOG NO. 7599 TECHNICAL DATA - Shaft width: 410mm - Number of knives: 4 pcs - Max thickness of processed element: 240mm - From above: - anti-kickback fingers - toothed feed roller, driven, swivel - pressure elements - planing shaft - pressure roller - smooth driven outfeed roller Hsdpoy T Rfqofx Ag Uon - Motor: 5.5kW - Electric brake - Manual table height adjustment - 2 feed speeds: 7,14m/min - Extraction port diameter: 120mm - Dimensions (L/W/H): 900x1030x1100mm - Weight: 350kg ADVANTAGES – Italian manufacture – Used thickness planer, very good condition Net price: 14,900 PLN Net price: 3,540 EUR (based on 4.2 PLN/EUR exchange rate) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7573 Technical data: - Shaft width: 640 mm - Number of knives: 4 pcs - Max thickness of machined element: 270 mm - Top section: Hodjy T Rd Hjpfx Ag Uon - Safety pawls - Toothed infeed shaft, driven - Hold-downs - Planing shaft - Hold-downs - Outfeed smooth shaft, driven - Bottom section: - Adjustable rollers in lower table: 2 pcs - Main motor: 7.5 kW - Electric table lifting – lifting motor: 0.75 kW - 2 feed speeds – feed motor: 1.1 kW - Suction outlet diameter: 160 mm - Dimensions (L/W/H): 1150x1240x1170 mm - Weight: 1073 kg ADVANTAGES: – Polish manufacture – Electric table height adjustment – Operating documentation (DTR) – Used thickness planer, in very good condition Net price: 26,900 PLN Net price: 6,400 EUR (depending on 4.2 EUR rate) (Prices may vary with higher fluctuations)

Condition: excellent (used), Catalog number 7995 TECHNICAL DATA - max. planing width 240mm - max. planing height 140mm 4 spindles: 1) horizontal bottom 240mm, 5.6kW 2) vertical right 140mm, 5.6kW 3) vertical left 140mm, 7.5kW 4) horizontal top 240mm, electrically adjustable up/down, 0.37kW - 7.5kW - diameter of all spindles 40mm - all spindles adjustable up/down and right/left - from above, 5 toothed, twisting feed rollers, including 1 double roller - from above, 2 rubber feed rollers - from below at the outlet, a split metal feed roller - rollers are pneumatically pressed - 3 side pressure rollers - electric adjustment of planing thickness, 0.37kW - length of infeed table 2080mm - stepless feed rate adjustment via frequency inverter - feed via Cardan shafts - feed motor 3.7kW - central lubrication - diameters of dust extraction nozzles 4x125mm - dimensions L/W/H 3600x1650x1700mm - weight approximately 3000kg ADVANTAGES – German-made, GUBISCH brand – with 4 heads – DTR documentation available – used planer, very good condition Net price: 32900 PLN Net price: 7840 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to significant fluctuations) Hsdey T N Ahjpfx Ag Uen

Condition: excellent (used), Catalog number 7994 TECHNICAL DATA - max. width of the workpiece 230mm - max. height of the workpiece 130mm 7 spindles: 1) horizontal lower 230mm 4kW 2) vertical right 130mm 3) vertical left 130mm (2 and 3 spindles) 11kW 4) horizontal upper 230mm 5.5kW 5) horizontal upper 230mm 5.5kW 4 and 5 spindles are electrically adjustable up/down 6) horizontal lower 230mm 4kW 7) universal 230mm, adjustable at an angle of 360° 5.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - 4 infeed rollers from above, geared, pulling - 4 outfeed rollers from above, pulling, rubber, smooth, including 3 double rollers - metal roller from below, pulling - feed on cardan shafts - rollers pneumatically pressed - stepless speed adjustment of the feed rate on an inverter - feed motor 3kW - working pressure 6-10 bar - electric adjustment of the planing thickness - central lubrication of the table - length of the infeed table 1960mm - diameter of the dust extraction nozzles 3x120mm, 4x140mm - dimensions L/W/H 5360x1800x1660mm - weight approx. 4000kg ADVANTAGES – German production, WEINIG brand – with 7 heads – DTR documentation Hedpfx Aoy T Nu Djg Ujn – universal spindle – used planer, very good condition Net price: 75900 PLN Net price: 18070 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to significant fluctuations)

Condition: used, Year of construction: 2001, Number of boring spindles 8 St. Working width 230 mm Working height 160 mm Feed motor 5,5 kW Feed speed 36 m/min. Control Logocom Hsdpfxey Ty H Ds Ag Usn Planing and moulder Weinig Unimat 3000 Brillant. Computer-controlled ProfiCenter for planing and profiling work with CNC-controlled spindles and loading magazine Weinig EM11. The control panel was equipped with the current Simatic Panel PC677C-15" in 2021. The sale takes place on behalf of the customer ex works. A viewing is possible at any time by arrangement. Spindle 1: Bottom / HSK Powerlock / 12,000 rpm Spindle 2: Right / HSK Powerlock / 4,000 - 12,000 rpm Spindle 3: Left / HSK Powerlock / 4,000 - 12,000 rpm Spindle 4: Right / HSK Powerlock / 4,000 - 12,000 rpm Spindle 5: Top / HSK Powerlock / 4,000 - 12,000 rpm Spindle 6: Bottom / HSK Powerlock / 4,000 - 12,000 rpm Spindle 7: Top / HSK Powerlock / 4,000 - 12,000 rpm Spindle 8: Bottom / HSK Powerlock / 4,000 - 12,000 rpm All spindles: CNC controlled (except spindle 6

Condition: excellent (used), Working dimensions: 230x160mm Spindle configuration: 1. Lower 15kW – Powerlock 2. Right 15kW – Powerlock 3. Left 15kW – Powerlock 4. Upper 22kW – Powerlock 5. Lower 15kW – Powerlock 6. Upper 30kW – Powerlock 7. Lower 15kW – Powerlock Feed drive - 7.5kW Hsdsy U Iipopfx Ag Usn Spindle speed 12,000 rpm Pneumatic pressure rollers for the infeed Feed drive on cardan shafts Smooth feed speed adjustment 6/36 m/min Automatic lubrication of the table Table made with MaratonCoating technology Control system: PowerCOM with motor control in Polish Soundproof cabin VibroControl vibration sensor Year of manufacture: 2010 Highnech E1 feeder, 2010 Infeed rollers driven by a 7.5 kW hydraulic pump.

Condition: used, Thickness planer Panhans 426 Planing width 630 mm Planing height 250 mm Electric height adjustment via positioning control TERSA safety planing cutterhead Table with four-point guidance Main motor 7.5 kW Feed rate 7 + 14 m/min Articulated pressure beam made of solid aluminum Machine is WORKSHOP TESTED and in TOP CONDITION Machine is connected and ready for demonstration at the showroom Hodpfx Agjy Tu R Ds Uon Available from stock in Lieboch

Condition: excellent (used), CATALOG NUMBER 7618 TECHNICAL DATA - shaft width: 500 mm - number of knives: 4 pcs - max thickness of workpiece: 230 mm top section: - anti-kickback fingers - toothed, feed, swivel, sequential infeed shaft - pressure rollers - planing shaft - pressure roller - smooth feed outfeed shaft bottom section: - 2 slip rollers in the table - motor: 5.5 kW - manual table height adjustment - 2 feed speeds: 7.5; 13 m/min - extraction port diameter: 160 mm - dimensions (L/W/H): 1100x1000x1200 mm - weight: 600 kg ADVANTAGES – made in Italy – original paint (not repainted) – used thickness planer, in very good condition Hedpfjy Tufnjx Ag Ujn Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 PLN/EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Combi 500 Combination Planer and Thicknesser - 2-knife cutterblock - Aigner auxiliary fence - Table length: 1800mm Hedpfx Agoy Tucts Ujn - 2 dust extraction ports - Feed motor with 2 speeds

Condition: excellent (used), functionality: fully functional, SCM Superset XL Four-Sided Planer Working width: 15–230 mm Working height: 6–120 mm Hedpey Ttryefx Ag Uon Number of spindles: 5 Spindle arrangement: Bottom Right Left Top Bottom Spindle speed: 6,000 rpm Pneumatic pressure rollers Feed speed adjustable via variator: 5–25 m/min Driven by cardan shafts CE certificate

Condition: used, Surface planer: Working width: 520 mm, Table length: 2200 mm, Spindle diameter: 120 mm, Number of knives: 4 pcs. Thickness planer: Table dimensions: 520 x 850 mm, Feed rate: 6.5 - 17 m/min. Location: Supplier. Hodjy Tpzqopfx Ag Uen

Condition: good (used), Year of construction: 1988, WACO HM 200 moulder with splitting unit in the end of machine. Max. working width/high : 200 x 120 mm Spindle diameter : 45 mm Max. infeed speed : 60 mtr/min Moulding heads with 6 knives Spindle configuration : 1. buttom 11 Kw 2. Top 11 Kw 3. Right 7,5 Kw 4. Left : 7,5 Kw Splitting unit : Hjdpfx Asur Nk Heg Usn 5. Right saw 37,5 Kw 6 Left saw 37,5 Kw Lots of extra tools, heads + sawblade boxes

Condition: excellent (used), CATALOGUE NUMBER 7130 TECHNICAL DATA - Maximum working width: 800mm - Maximum working thickness: 200mm Top section: - Pawls - Toothed feed roller - 3 rows of pressure rollers - Planing shaft 810mm, for 4 knives (2 blades fitted), approx. 7.5kW - Pressure - Smooth, metal feed roller Bottom section: - Adjustable infeed table with slip roller - Planing shaft 810mm, for 4 knives (2 blades fitted), 7.5kW - Smooth, metal slip roller - Electric table raising - Extraction nozzle diameter: 120mm - Dimensions (L/W/H): 1900x1450x1350mm - Weight approx. 2500kg – Czech manufacture – Very good condition – Used planer Net price: 33,500 PLN Hsdpfx Agsy Tkk Te Uen Net price: 7,970 EUR depending on EUR 4.2 rate (Prices may change with significant fluctuations)

Condition: good (used), Year of construction: 1993, machine/vehicle number: 3366, functionality: fully functional, power: 3.8 kW (5.17 HP), input voltage: 380 V, input frequency: 50 Hz, planing width: 410 mm, number of blades: 4, actuation type: manual, rotational speed (max.): 5,100 rpm, overall weight: 620 kg, GEA Planer/Jointer Type DS 410 Used machine Serial No.: 3366, Year of manufacture: 1993 Item number: JA_G260502 Description Planing width 410 mm Jointer knives: Strip, Z4 Maximum chip removal 5 mm Rebate/Bevel joint: ---- Knife shaft diameter: 120 mm Speed 5100 rpm Knife guard: Fan guard Working height 830 mm Infeed table 1450 mm Outfeed table 1050 mm Fence: 90°-45° Auxiliary fence: Yes Power 380V/50Hz 3.8 kW Dimensions (LWH) 2600 x 1100 x 1100 mm Hodpjy Uw Dpjfx Ag Uon Dust extraction: 140 mm Weight approx. 620 kg Condition / Work performed • Machine cleaned • Machine function tested • Age-related and usage-related signs of wear • Available from stock Errors and changes to technical specifications are subject to change. Note: Used goods: • Prices are quoted as pick-up prices (unless otherwise stated!) from our location in Ottendorf-Okrilla/Germany - free loading! (unless otherwise stated) • Subject to prior sale! • You will receive an invoice with VAT shown. • All items are sold as seen, without any warranty claims. The buyer is free to inspect the items at our location. • Our general terms and conditions apply. • Special agreements are only possible in writing. • Items that may be visible in the background of the picture are not included in the scope of supply. • Saw blades are only for illustrative purposes and are not included in the scope of supply. Shipping options: • We will gladly provide you with a transport quote. • Collection from our location in Ottendorf-Okrilla, free of charge by arrangement. (Assembly and demonstration of the goods for demonstration purposes is optional and can be arranged!) • Delivery may be partially disassembled. • Our trained service personnel can optionally assemble the machine at your location and provide you with a brief training session. Travel, transport and service times are subject to an additional charge.

Condition: excellent (used), Catalogue number 6393 TECHNICAL DATA - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm - Number of spindles: 4: 1) Bottom horizontal, 200 mm, 5.5 kW 2) Right vertical, 150 mm, 4 kW 3) Left vertical, 150 mm, 4 kW Hodpfx Agsy Ti R Ej Usn 4) Top horizontal, 200 mm, 5.5 kW - All cutterheads adjustable vertically and horizontally - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm From above: - 6 feed-in traction rollers, toothed (including 2 double) - 1 feed-out traction roller, rubber-coated From below: - Feed-in drive roller, toothed, steering, integrated in lower table - 3 side pressure rollers - Feed-out traction roller, metal, smooth - All rollers pneumatically loaded - Infeed table length: 2,130 mm - Height-adjustable table - Centralized lubrication system - Electric adjustment of planing thickness - Lift motor: 1.1 kW - Stepless feed speed control via inverter - Feed drive motor: 3 kW - Feed via Cardan shafts - Fully enclosed in cabin - Extraction port diameters: 4 x 130 mm - Dimensions (LxWxH): 3,550 x 1,750 x 1,800 mm - Approx. weight: 3,000 kg ADVANTAGES – Equipped with 4 cutterheads – Ideal for wet and dry timber – DTR operation and maintenance manual included – Used machine, very good condition Net price: 65,900 PLN Net price: 15,690 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. 1 WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Hsdpfx Agexz Hh Uo Ujn Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the e...

Condition: good (used), Year of construction: 2000, functionality: fully functional, SCM Thicknessing Planer S 630 - Planing width: 630 mm - 4 throw-away blades - Max. planing height: 300 mm - 2 rubber-coated feed rollers - Digital display of planing thickness - Motor: 7.5 kW - Electric table adjustment: 0.7 kW - Stepless feed speed: 6-20 m/min - Feed motor: 1.1 kW - Dust extraction port diameter: 150 mm - Dimensions (L/W/H): 1000x1400x1200 mm - Weight: 950 kg Hedjy S Tfdjpfx Ag Ujn

Condition: used, Year of construction: 2002, 5 stations + 1 milling unit Digital positioning Table lubrication Air cushions in the table Capacity: 230 mm / 120 mm Total power: 43 kW Hedey S Rkqspfx Ag Uen 380 V Equipped with 4 helical tool holders with inserts Machine documentation and service keys Machine overhauled and available in stock