Condition: excellent (used), Catalog number 7994 TECHNICAL DATA - max. width of the workpiece 230mm - max. height of the workpiece 130mm 7 spindles: 1) horizontal lower 230mm 4kW 2) vertical right 130mm 3) vertical left 130mm (2 and 3 spindles) 11kW 4) horizontal upper 230mm 5.5kW 5) horizontal upper 230mm 5.5kW 4 and 5 spindles are electrically adjustable up/down 6) horizontal lower 230mm 4kW 7) universal 230mm, adjustable at an angle of 360° 5.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - 4 infeed rollers from above, geared, pulling - 4 outfeed rollers from above, pulling, rubber, smooth, including 3 double rollers - metal roller from below, pulling - feed on cardan shafts - rollers pneumatically pressed - stepless speed adjustment of the feed rate on an inverter - feed motor 3kW - working pressure 6-10 bar - electric adjustment of the planing thickness - central lubrication of the table - length of the infeed table 1960mm - diameter of the dust extraction nozzles 3x120mm, 4x140mm - dimensions L/W/H 5360x1800x1660mm - weight approx. 4000kg Hodjzrk Uajpfx Aanonr ADVANTAGES – German production, WEINIG brand – with 7 heads – DTR documentation – universal spindle – used planer, very good condition Net price: 75900 PLN Net price: 18070 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to significant fluctuations)

Condition: excellent (used), Catalogue number 7640 ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing logs, flooring boards, etc. – 2 planing cutterheads + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition TECHNICAL SPECIFICATIONS - Max planing width: 610 mm - Max planing height: 200 mm - From above: - Powered feed roller, toothed - Pawls - Pressure mechanism - 2 powered feed rollers, toothed - Pressure mechanism - 610 mm, 6-knife planing cutterhead, 15 kW - Pressure mechanisms - Smooth outfeed roller - From below: - Side pressure at infeed - Guide rail - Infeed table - Powered feed roller, toothed - 610 mm, 6-knife planing cutterhead, 7.5 kW - 2 smooth feed rollers - Side pressure at outfeed - Rear: - 2 side spindles + pressure units: 1) Right vertical spindle 200 mm, 15 kW 2) Left vertical spindle 200 mm, 15 kW - Electrically adjustable left vertical spindle (right/left) - Spindle diameter: 40 mm - Alternate spindle settings - Spindles adjustable: up/down, right/left 3) Additional lower horizontal spindle 160 mm, adjustable up/down and right/left, 5.5 kW - Spindle diameter: 35 mm Hnjdpezrk T Aofx Aanjr - At outfeed: 2 upper metal sliding rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 12.8 / 16.3 / 20 / 25.6 / 32.6 / 40 m/min - Feed motor: 8 kW - Extraction port diameters: 2×120, 2x160 mm - Dimensions (LxWxH): 2980 x 1980 x 1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (depending on 4.2 EUR rate) (Prices may change with significant exchange rate fluctuations)

Condition: new, Catalogue No. S0336 TECHNICAL SPECIFICATIONS - Surface planer table length: 1800 mm - Working width: 410 mm - Working height: 225 mm - Spindle speed: 4500 RPM - Number of knives: 4 pcs - Spindle diameter: 100 mm - Motor power S1: 4/5.6 kW - Voltage: 400 V - Dimensions (L/W/H): 1900/800/1300 mm - Weight: 495 kg Four-knife cutterblock ensures precise machining, High-grade construction and finish, Foldable planer tables to the rear—do not limit thicknesser functionality, Table made of grey cast iron with ground surface, Adjustable thicknessing rollers for optimal workpiece feed, Hsdpfx Aaszrk Rnjnsnr Sturdy tiltable fence adjustable from 90° to 45°, Precisely mounted reversing knife spindle, Thicknesser table with central column guidance and stabilizer, Space-saving side-mounted profile fence. Scope of delivery: – Knives (installed), – Heavy profile fence, – Two rollers in the lower thicknesser table Optional equipment: – Horizontal borer, – Spare knives 410 x 25 x 3.0 mm Net price: 15,700 PLN Net price: 3,710 EUR (based on exchange rate 4.2 EUR) (Prices may vary due to significant exchange rate fluctuations)

Condition: used, REX HOMS-410K — 12-Spindle Four-Side Moulder Manufacturer: REX Holzbearbeitungsmaschinen (Georg Schwarzbeck GmbH & Co KG), Germany Model: HOMS-410K Machine No.: 22.303 Year of manufacture: 1998 Voltage: 400V / 50Hz Hnodpfx Aasztxyyonor Number of spindles: 12 Feed mechanization: HIT Operating hours: ~6,000 mth

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) Working height: 10 - 160 mm . Working width: 20 - 230 mm. 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor, 60m/min. Heavy duty feed works. 10x top feed rollers. First top feed roller with clutch installed for use with mechanisation. 5x bottom feed rollers. Automatic lubrication system. Electric digital display memory system. Hnodpfx Aaoztv I Iensr CNC POSITIONING ON SPINDLES 3, 5 & 8 Possible to supply with Weinig moulder infeed and outfeed

Condition: reconditioned (used), LEADERMAC THUNDERMAC 923T SPINDLES: 9 X 50MM X 6000 RPM BOTTOM (22 KW) - RIGHT (15 KW) - LEFT (15 KW) - RIGHT (15 KW) - LEFT (15 KW) - Hodpfx Ajztv Hwsanenr TOP (22 KW) - BOTTOM (22 KW), TOP (22 KW) - BOTTOM (22 KW). WORKING WIDTH: 230 (245) MM, HEIGHT: 160 MM. MAX FEED SPEED 80M/MIN (POSSIBLE TO INCREASE TO 150M/MIN) STRAIGHT JOINTERS. PROFILE JOINTERS. CNC POSITIONING ON SPINDLES 3, 5, 6, 8 CONNECTION: 380 V / / 50 HZ 400 AMPS. FULL DOCUMENTATION INCLUDED.

Condition: excellent (used), Year of construction: 2008, WEINIG HYDROMAT 2000 FEED MOTOR 5.5 KW FEEDRATE MAX 36 M/MIN SPECIAL WIDE FEEDING SYSTEM WITH AIR BED 1ST SPINDLE BOTTOM 11 KW, COUNTER BEARING 2ND SPINDLE RIGHT 7.5 KW 3RD SPINDLE LEFT 7.5 KW 4TH SPINDLE BOTTOM 7.5 KW, COUNTER BEARING 5TH SPINDLE TOP 15 KW, COUNTER BEARING WORKING WIDTH 250 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 5 BOTTOM SPINDLES 2 RIGHT SPINDLES 1 SPINDLES LEFT 1 SPINDLES TOP 1 SPINDLE CONFIGURATION B-R-L-B-T SPINDLE ROTATION SPEED MAX 1/MIN 7.200 RPM SPINDLE DIAMETER 40 MM Hjdeztvzzepfx Aanonr CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 5,5 KW MAIN MOTOR POWER 15 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT PIECE PACKAGE REDUCED ROLLER GAP PNEUMATIC TOP PRESSURE FIRST INFEED ROLLER CONTROLLED TYPE OF FEED ROLLER DRIVE CARDANIC MANUAL CENTRAL LUBRICATION CONTROL WEINIG POWERCOM PLUS CONFORMITY MARKING CE MARK TOTAL CONNECTION 55 KW

Condition: ready for operation (used), Year of construction: 2015, Weinig Powermat 700 6x 40mm Spindles. CNC on spindles 3, 4 and 5. Width 20-230mm Height 10-160mm Memory system Automatic lubrication system for bedplates. No 1.  11kW - Bottom 7000rpm No 2. 7.5kW - Right 7000rpm No 3. 7.5kW - Left 7000rpm No 4. 15kW - Top 7000rpm Hedpfxjztvhhe Aanenr No 5 . 11kW - Top 7000rpm No 6 . 11kW - Bottom 7000rpm Electronically variable feed. 40m/min Short infeed table. Marathon coating for machine bed plates. Manuals & hand tools.

Condition: new, Number of spindles 6 St. Working width 15 - 250 mm Working height 10-200 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 6-24 m/min. Kuper SWT XL-6 Automatic Planer and Moulder (Window Version with Glazing Bead Separation) ----- - ??Number of spindles: 6 (Bottom, Right, Left, Top, Top, Bottom) - Working width: 15 - 250 mm - Working height: 10 - 200 mm - Spindle speed: Frequency-controlled 4,000 - 8,000 rpm - Feed speed: 6 - 24 m/min, infinitely variable - Feed motor with electronic brake: 4 kW - Equipped for glazing bead separation in window production - Motorized axial and radial spindle adjustment - K2 Comfort Control, Professional - 9" Touchscreen Manufacturer's Description (Summary): ----- 1st Spindle: HORIZONTAL BOTTOM ----- Siemens IE3 motor with inverter brake: 7.5 kW Diameter: 40 mm Spindle length: 275 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool cutting circle: 125 - 160 mm Rebating unit: 20–25 mm diameter difference relative to planing head Important: Machine cannot be operated without the jointing/rebating cutter Extraction nozzle: D = 125 mm "Pro-Lock" tool clamping system 2nd Spindle: VERTICAL RIGHT ----- Siemens IE3 motor with inverter brake: 7.5 kW Diameter: 40 mm Spindle length: 176 mm Clamping length (effective length): 170 mm Speed, frequency-controlled: 6,000 - 8,000 rpm Tool cutting circle: 112 - 200 mm Axial adjustment range: 60 mm Table plate adjustable to tool radius Standard profile depth 20 mm Extraction nozzle dia. 125 mm Extraction; individually adjustable chip deflector "Pro-Lock" tool clamping system Motorized radial positioning Motorized axial positioning 3rd Spindle: VERTICAL LEFT: ----- Siemens IE3 motor with inverter brake, 7.5 kW Diameter 40 mm Spindle length 176 mm Clamping length (effective length) 170 mm Speed, frequency-controlled 6,000 – 8,000 rpm Tool cutting circle 112 – 200 mm Axial adjustment range 60 mm Standard profile depth 20 mm Hnedpfx Aezrh E Njanjr Table plate adjustable to tool radius Extraction nozzle dia. 125 mm Extraction; individually adjustable chip deflector (chips discharged downwards) "Pro-Lock" tool clamping system Motorized radial positioning Motorized axial positioning 4th Spindle: HORIZONTAL TOP: ----- Siemens IE3 motor with inverter brake, 7.5 kW Diameter 40 mm Spindle length 260 mm Speed, frequency-controlled 6,000 – 8,000 rpm Tool cutting circle 112 – 200 mm Axial adjustment range 20 mm Pneumatic pressure shoe, dynamically adjustable via linear guides Pressure lips in front of the spindle: pneumatically sprung, externally adjustable, with path control Standard profile depth 20 mm Extraction nozzle dia. 125 mm Extraction; individually adjustable chip deflector "Pro-Lock" tool clamping system Motorized radial positioning Motorized axial positioning 5th Spindle: HORIZONTAL TOP: ----- Siemens IE3 motor with inverter brake 7.5 kW Diameter 40 mm Spindle length 260 mm Speed, frequency-controlled 6,000 – 8,000 rpm Tool cutting circle 112 – 200 mm Axial adjustment range 20 mm Standard profile depth 20 mm Extraction nozzle dia. 125 mm Extraction: individually adjustable chip deflector "Pro-Lock" tool clamping system Motorized ...

Condition: excellent (used), Catalog number: 8061 TECHNICAL DATA - max width of workpiece: 230mm - max height of workpiece: 130mm - 5 spindles 1) horizontal lower: 230mm, 4kW 2) vertical right: 130mm Hodpfezrgarox Aanonr 3) vertical left: 130mm (spindles 2 and 3), 11kW 4) horizontal upper: 230mm, 5.5kW 5) horizontal lower: 230mm, 7.5kW - all spindles adjustable up/down, right/left - spindle diameter: 40mm - 4 infeed rollers from above, geared - outfeed roller from above, pulling, rubber, smooth - feed on cardan shafts - pressure rollers pneumatically actuated - stepless feed speed adjustment via frequency inverter - feed motor: 4kW - operating pressure: 6-10 bar - electric adjustment of planing thickness - central lubrication of the table - length of infeed table: 1970mm - diameter of dust extraction nozzles: 5x140mm - dimensions (L/W/H): 3400x1660x1600mm - weight: approx. 2500kg ADVANTAGES – German production, WEINIG brand – 5 heads – DTR documentation – used planer, very good condition Net price: 45900 PLN Net price: 10929 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant exchange rate fluctuations)

Condition: excellent (used), Catalog number: 8059 TECHNICAL DATA - max width of workpiece: 200mm - max height of workpiece: 140mm - number of spindles: 4 1) horizontal lower: 200mm, 5.5kW 2) vertical right: 140mm, 4kW 3) vertical left: 140mm, 4kW 4) horizontal upper: 200mm, 5.5kW - all heads adjustable up/down, left/right - spindle diameter: 40mm - spindle speed: 6000 rpm – top: - infeed rollers, toothed, 6 pcs, including 2 double rollers - outfeed roller, rubber, double – bottom: - side pressure roller - infeed roller, toothed, driving, angled in the lower bed - side pressure roller - outfeed roller, driving, metal, smooth - all rollers are pneumatically pressed - length of infeed bed: 1600mm - bed adjustable up/down - central lubrication - electric adjustment of planing thickness - lifting motor: 1.1kW - stepless feed rate adjustment - feed motor: 3kW - feed via Cardan shafts - enclosed in a cabinet - diameter of dust extraction nozzle: 4x140mm - dimensions (L/W/H): 3200x1700x1750mm - weight: 3000kg ADVANTAGES – with 4 heads – ideal for wet and dry wood – used machine, very good condition Net price: 51900 PLN Net price: 12357 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations) Hnjdpezrf S Tjfx Aaner

Condition: excellent (used), Catalog number: 7715 TECHNICAL DATA - max. width of workpiece 220mm - max. height of workpiece 130mm - 8 spindles: 1) horizontal lower 220mm 5.5kW 2) vertical right 130mm 7.5kW 3) vertical left 130mm 7.5kW 4) vertical right 130mm 5.5kW 5) horizontal upper 220mm 11kW – 5th spindle with electrically adjustable up/down movement 6) horizontal lower 220mm 5.5kW 7) horizontal lower 220mm 5.5kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) universal 220mm, adjustable 360° 7.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm – from above: - 6 infeed rollers, double-toothed, pulling + 1 single - 3 outfeed rollers, pulling, rubber, smooth double + 3 single - meter counter – from below: - infeed roller, toothed, pulling, pivoting in the lower bed - 3 metal rollers, pulling, smooth - feed on Cardan rollers - rollers with pneumatic pressure - stepless feed speed adjustment + 2 speeds 10-60m/min Hjdpfx Aszh Ipmsanonr - feed motor 10kW - electric adjustment of planing thickness - body lifting motor 0.75kW - central lubrication of the bed - diameter of dust extraction nozzles 5x140mm, 3x 120mm - machine dimensions L/W/H 4680x1780x1850mm - dimensions of the control cabinet (on pallet) 1020x1000x2230mm - weight approximately 5000kg ADVANTAGES – with 8 heads – universal spindle – ideal for both wet and dry wood – German production, WEINIG brand – unpainted – very few operating hours – used planer, in perfect condition Net price: 125900 PLN Net price: 29976 EUR, depending on the exchange rate of 4.2 EUR (Prices may change due to higher fluctuations)

Condition: excellent (used), Catalogue number: 7265 TECHNICAL DATA SURFACE PLANER: - Shaft width: 510 mm - Noise-reducing comb - Shaft guard - Original cast iron tilting fence - Table length: 2060 mm - Both infeed and outfeed tables adjustable - Extraction port diameter: 150 mm THICKNESSER: - Maximum workpiece thickness: 200 mm - Thicknesser shaft guard - Electric height adjustment for planing depth From above: - Anti-kickback fingers - Serrated infeed roller Hnsdpfx Aezcvh Ieaner - Pressure bar - Planing cutterblock - Pressure bar - Smooth outfeed roller From below: - 2 adjustable rollers on lower table - 2 feed speeds: 7 / 14 m/min - Extraction port diameter: 150 mm - Brake - Main motor: 4 kW - Dimensions (LxWxH): 2200 x 1400 x 1050 mm - Weight: 1055 kg ADVANTAGES – Made in Germany – Brake – Noise-reducing comb – Electric planing height adjustment – Not repainted – Very good condition, used machine Original photos Start-up video: youtube.com/watch?v=7_aygbppcsY Net price: 16,900 PLN Net price: 4,020 EUR (based on 4.2 PLN/EUR exchange rate) (Prices may change with greater fluctuations)

Condition: excellent (used), Catalogue number 7739 TECHNICAL DATA SURFACE PLANER: - shaft width: 410 mm - 3-knife cutterblock - sound-dampening comb - shaft guard - adjustable angle guide fence - table length: 2060 mm - both tables adjustable THICKNESSER: - max material thickness on thicknesser: 240 mm - thicknesser shaft guard *from above: - anti-kickback fingers - serrated, sprung feed roller - pressure bars - planing cutterhead - pressure bar - smooth outfeed roller - 2 adjustable rollers in lower table - main motor: 5.5 kW Hnodszhu A Tepfx Aansr - electric brake - electric table height adjustment (up/down) - dust extraction port diameter: 120 mm - dimensions (L/W/H): 2060x970x1150 mm - weight: 660 kg ADVANTAGES – Italian-made – sound-dampening comb – not repainted – in perfect condition – used planer-thicknesser Net price: 22,900 PLN Net price: 5,450 EUR (calculated at 4.2 PLN/EUR) (Prices may fluctuate with larger exchange rate changes)

Condition: excellent (used), CATALOGUE NUMBER: 7816 TECHNICAL DATA DDCA - Surfacing cutter length: 180 – 845mm - Surfacing cutter width: 30 – 75mm - Surfacing cutter thickness: 10 – 45mm - Spindle diameter: 30mm - Max. disc diameter: 250mm - 5 spindles: - Left side: 1) Vertical upper: 2.2kW 2) Horizontal lower: 2.2kW Right side: 1) Vertical lower: 2.2kW 2) Vertical upper: 2.2kW 3) Horizontal lower: 2.2kW - Spindles adjustable up/down, left/right Hnedpfx Aszh H R Aeanor - Material pressure: 2 pcs - Smooth feed rate adjustment: 0-10m/min - Spindle diameter: 5x100mm - Dimensions (L/W/H): 1870/2230/1320mm DDGA - Width of workpiece: 35 – 130mm - Thickness of workpiece: 10 – 40mm - Minimum length of workpiece: 200mm - Spindle arrangement: 1) Lower: 5.5kW 2) Right: 5.5kW 3) Left: 5.5kW 4) Upper: 5.5kW - Spindles adjustable up/down - 6-blade heads fitted on upper and lower spindles - Spindle diameter: 40mm - Milling cutters fitted on right and left spindles, max. diameter: 50mm - Spindle diameter: 30mm - 2 feed rates: 4.9kW - Central chain lubrication via oil pump - Spindle diameter: 4x125mm - Dimensions (L/W/H): 3100/1300/1700mm ADVANTAGES - Polish made - 5 spindles - Unpainted - Very good condition - Used production line Net price: 52900 PLN Net price: 12600 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (Price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Catalog number 7289 TECHNICAL DATA - max. width of workpiece 230mm - max. height of workpiece 170mm 6 spindles: 1) horizontal lower 230mm 5.5kW 2) vertical right 170mm 3) vertical left 170mm (spindles 2 and 3) 11kW 4) horizontal upper 230mm 11kW 5) horizontal upper 230mm 7.5kW 6) horizontal lower 230mm 11kW - all spindles adjustable up/down, right/left - spindles 4 and 5 with electric up/down adjustment - spindle speed 8000 rpm - spindle diameter 40mm - all spindles equipped with an electric brake - 6 top feed rollers, pulling, toothed, including 1 double roller - top discharge roller, pulling, rubber, double - bottom discharge roller, pulling, rubber, double - side pressure - feed on Cardan shafts - rollers with pneumatic pressure - stepless feed speed adjustment 6-24m/min - feed motor 4kW - electric adjustment of planing thickness - body lifting motor 0.55kW - central lubrication of the table - diameter of extraction nozzles 6x140mm - dimensions (L/W/H) 4900x2400x2000mm - weight approximately 4000kg ADVANTAGES – German production, WEINIG brand – with 6 heads – unpainted – used planer, very good condition Original photos Net price: 122900 PLN Net price: 2926 EUR depending on the exchange rate of 4.2 EUR (Prices may change due to higher fluctuations) Hnsdpfxey N Ahis Aanjr

Condition: excellent (used), Catalogue number 7641 TECHNICAL DATA Hedpfxszh Iwdo Aanjnr - Max. planing width: 800 mm - Max. planing height: 200 mm - Upper section: - Pull-in feed roller, toothed - Pawls - Pressure unit - 2 feed rollers, toothed - Pressure unit - Planing shaft 800 mm, 4-knife, 7.5 kW - Pressure units - Profiling shaft 800 mm, 4-knife (fitted with 3 straight knives, 1 profiling knife) - Pressure unit - Outfeed roller, smooth - Lower section: - Guide rail - Infeed table - Feed roller, smooth - Planing shaft 800 mm, 4-knife, 7.5 kW - 2 feed rollers, smooth - Smooth, split running roller - Side pressure at outfeed - Rear section: - 2 side spindles + pressure units: 1) Right vertical 90 mm, 4 kW 2) Left vertical 90 mm, 4 kW - Spindle diameter: 35 mm - Spindles arranged alternately - Spindles adjustable up/down, right/left 3) Additional lower horizontal spindle, 350 mm, adjustable up/down + right/left, 5.5 kW - Spindle diameter: 40 mm - Outfeed: 4 upper metal sliding rollers, 2 lower feed rollers, rubber-coated - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 7/14/9/18/11.5/23 m/min - Feed motor: 2.2 kW - Extraction outlet diameters: 3×180, 130 mm - Dimensions (L×W×H): 3100×2000×1900 mm - Weight: approx. 3,500 kg ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing beams, flooring, etc. – 3 planing shafts + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer in very good condition Net price: 64,900 PLN Net price: 15,450 EUR (based on an exchange rate of 4.2 EUR) (Prices may change with significant currency fluctuations)

Condition: excellent (used), CATALOG NUMBER 7679 TECHNICAL DATA - Maximum planing width: 610 mm - Maximum planing height, double-sided: 200 mm - Electrically adjustable table height (up/down) - Maximum planing height, four-sided: 100 mm Top section: - Driven infeed shaft, toothed - Kickback devices - Pressure unit - 2 driven shafts, toothed - Pressure unit - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure unit - Outfeed driven shaft, smooth Bottom section: - Guide bar - Driven roller, toothed - 610 mm planing shaft, 4-knife, 5.5 kW - 2 smooth driven rollers Rear section: Hnsdjzh Iuvepfx Aaner - 2 side spindles with pressure unit 1) Right vertical, 100 mm, 4 kW 2) Left vertical, 100 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable vertically and horizontally - Manual planing width adjustment - 6 feed rates: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Dimensions (L/W/H): 2500 x 1800 x 600 mm - Weight: approx. 3000 kg FEATURES - Perfect for log, flooring, and similar applications - Manufactured by German brand KUPFERMUHLE - 2 horizontal planing shafts + 2 vertical spindles - Used planer, in very good condition Net price: 56,900 PLN Net price: 13,550 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7964 TECHNICAL DATA - max. width of workpiece: 630mm - max. thickness of workpiece: 250mm - top: - toothed feed roller - pressure rollers - pressure pad - toothed feed roller, 2 pcs - pressure pad - 4-knife planing shaft, 630mm, 15kW - pressure pad - smooth feed roller Hnjdezfi E Rspfx Aansr - bottom: - adjustable infeed table - toothed feed roller - 4-knife planing shaft, 630mm, 7.5kW - adjustable feed roller in the bottom table, 2 pcs - electric height adjustment - lifting motor 0.65kW - 6 feed speeds - feed motor 4kW - diameter of dust extraction nozzle 2x160mm - dimensions (L/W/H): 1780x1850x1700mm - weight approx. 3000kg ADVANTAGES - manufactured by the German brand KUPFERMUHLE - very good condition - used planer Net price: 37900 PLN Net price: 9024 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to higher fluctuations)

Condition: new, Catalogue number: S 0335 - New machine, in stock - CE certificate SURFACE PLANER: - Working table dimensions: 1500 х 320 mm - Max. planing depth: 5 mm - Aluminium guide fence dimensions: 1100 x 155 mm THICKNESS PLANER: - Working table dimensions: 316 x 600 mm - Max. planing depth: 3 mm - Feed speed: 7 m/min - Material thickness: 4 - 230 mm - Motor power: 3 kW - Cutterhead speed: 5600 min⁻¹ - Dimensions (L/W/H): 1500/600/1050 mm - Weight: 315 kg * Cast iron tables with ground surface * Tables with precise adjustment for longitudinal planing * Stable aluminium fence adjustable from 90° to 45° * Cutterhead guard Hodpfx Aaezh H N Ejnjnr * Thickness planer table with central guide column and support * Power on/off without stopping the machine * Mortiser with left-hand rotation Net price: 14,500 PLN Net price: 3,440 EUR Price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7134 TECHNICAL DATA - Max. planing width: 500 mm - Max. planing height: 190 mm Top section: - Anti-kickback fingers - Pulling feed roller, sequential - 2 rows of pressure rollers - Pull-in feed roller, sequential - 500 mm planing cutterhead, 4-knife, 7.5 kW motor - Pressure rollers - Smooth, pulling outfeed roller - Outfeed pressure roller Bottom section: - Adjustable infeed table + pressure roller - Smooth sliding roller - 500 mm planing cutterhead, 4-knife, 5.5 kW motor - 2 smooth sliding rollers - Side pressure roller Rear section: - Side spindles: 1) Right vertical 140 mm, 4 kW 2) Left vertical 140 mm, 4 kW - Spindle diameter: 40 mm - Spindles adjustable up/down, right/left - Stepless feed speed adjustment: 8–30 m/min - Electric table lifting - Extraction port diameters: 2x145 mm, 2x160 mm Hnsdpfx Aozh Iz Asansr - Dimensions (L/W/H): 2050 x 1700 x 1700 mm - Weight: 2100 kg FEATURES – Ideal for flooring production – Electric table lifting – Czech manufacture – Used planer, in very good condition Net price: 37,900 PLN Net price: 9,020 EUR (based on EUR rate 4.2) (Prices may change with significant fluctuations)

Condition: used, Year of construction: 2005, total width: 1,250 mm, total height: 1,250 mm, Colour: Grey Weight: 820 kg Dimensions (LxBxH): 105 x 125 x 125 cm - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: AF 1.04487 - Main motor power [kW]: 4.0 - Max. planing width [mm]: 520 - Planing shaft speed [rpm]: 5000 Hedpfxownhyzj Aansnr - Planer block diameter [mm]: 120 - Number of cutters [pcs.]: 2 - Transport dimensions: 1050mm x 1250mm x 1250mm (l x w x h) - Transport weight [kg]: 820kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2011, Usable working width: 520 mm Thickness table dimensions: 520 x 900 mm Max. working height: 300 mm Min. working height: 3.5 mm Hsdpfx Aszimbdeanenr Min. workpiece length: 220 mm Max. material removal: 8 mm Cutterhead diameter (number of cutters): 120 mm (4 pieces) Cutterhead speed: 4500 rpm Feed rate: 5-8-12-18 m/min Motor power: 7 kW Dust extraction port diameter: 150 mm Dust extraction volume: 1300 m³/h Weight: approx. 680 kg Dimensions: 1150 x 1100 x 1250 mm Storage location: Garbsen

Condition: excellent (used), Year of construction: 1998, Planer Manufacturer: Panhans Type: 335A Year of manufacture: 1998 Working width: 510 mm Planer table length: 2,870 mm Digital display for chip removal Number of knives: 4 Hodpfxsztq E Ij Aanjnr Knife type: Tersa Power: 4 kW Speed: 5,000 rpm Motor brake: Yes Weight: approx. 870 kg

Condition: used, Year of construction: 1993, machine/vehicle number: 315 AE 0643 V 02 85, ACMA DM82 – Single-Blade Rip Saw (Délingeuse monolame) The ACMA DM82 is a robust French single-blade rip saw for professional longitudinal splitting of boards and strips in sawmills and woodworking shops. Featuring hydraulic feed and INRS safety approval (Visa No. 315 AE 0643 V 02 85) from 1993, it is ideal for precise wood cutting up to 160 mm height. Cutting length: 4000–5200 mm Cutting height: 140–160 mm Cutting width: 370–600 mm Saw blade Ø max.: 600 mm (min. 450 mm) Saw motor power: 9–13.2 kW (12–18 HP), 380 V 3~ RPM: 3000 rpm Hydraulic motor: 2.2 kW Hjdpfx Aaeyrnxkenenr Table height approx.: 820 mm Dimensions (L×W×H): 4800–6600 × 1500–2300 × 800–1500 mm Weight: approx. 1350 kg