Used other welding machines & cutting equipment for sale (171)

Year of construction: 2019, condition: like new (used), functionality: fully functional, Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA MH6.(Payload: 6kg, H-Reach:1422mm, Robot Mass: 130kg, 2009.03) 1 x YASKAWA DX100 controller.( 2009.03 ) 1 x IPG YLS-1000 Ytterbium 1kW Laser.(2011.05) Fgsdpfx Adjh Ad E Hs Isd 1 x IPG P30 laser welding head with coaxial nozzle and cam.(2018.05) 1 x Cooling water circulation system RIEDEL for laser.(2011) 1 x Cooling water circulation system Chilly-35-S for optics.(2010). 1 x siegmund table 1200x800.(2019) 1 x IPG Welding Head Alarm Module Box WHAM.(2018.05) 1 x PC for Laser with LaserNet software. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Year of construction: 2025, operating hours: 300 h, condition: like new (used), Equipment: CE marking, TECHNICAL DETAILS: Drive Unit: Model: VM800T. Maximum load capacity: 400 t. Turning capacity: 800 t. Fgodpfxsy Ex D Ss Ad Ied Maximum speed: 108 cm/min. Minimum speed: 20 cm/min. Maximum diameter: 8,000 mm. Minimum diameter: 2,500 mm. Length: 6,360 mm. Width: 1,544 mm. Height: 1,565 mm. Weight: 15,300 kg. Diameter range: As per drawing, 2,500 ÷ 8,000 between 61º and 54º. Wheels: Steel, Ø 950 x 350 mm. Power: 2 motors of 7.5 kW with primary epicyclic gearboxes and secondary worm gearbox. Idler Unit: Model: VC800T. Maximum load capacity: 400 t. Maximum diameter: 8,000 mm. Minimum diameter: 2,500 mm. Length: 5,852 mm. Width: 1,500 mm. Height: 1,565 mm. Weight: 12,720 kg. Diameter range: As per drawing, 2,500 ÷ 8,000 between 61º and 54º. Wheels: Steel, Ø 950 x 350 mm.

Year of construction: 2002, condition: good (used), Machine type: Laser welding system Manufacturer: Arnold Factory number: 20435 DCS Year of manufacture: 2002 Fgedpskv Upiofx Ad Ied Available from January 2027 Available at the current location for self-dismantling. Optionally, we can offer dismantling and loading services.

Year of construction: 2019, condition: like new (used), Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA HP20D.(Payload: 20kg, H-Reach: 1717mm, Robot Mass: 280kg, 2009.01) 1 x YASKAWA DX100 controller.( 2009.02 ) 1 x LASERLINE LDM 1200-60 Diode 1320W Laser.(2015.10) 1 x LASERLINE laser welding head OTS-5 with Crossjet and cam.(2017.12) 1 x Cooling water circulation 2 way system HYFRA Sigma7 for laser and optics.(2018) 1 x siegmund table 1200x800.(2019) Fgsdpfxsh Aiy Ss Ad Isd Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Year of construction: 2015, condition: ready for operation (used), A complete CNC CO2 laser cutting system Bystronic is available. Working dimensions X/Y: 4000mm/2000mm, travel path X/Y/Z: 4060mm/2030mm/1700mm, max. simultaneous speed: 84m/min, positioning accuracy: +/-0.1mm, repeatability: +/-0.05mm, max. table load: 1500kg, weight: approx. 18500kg, operating hours: 29456h. Laser source: Bystronic ByLaser 6000, laser type: CO2, laser power: 6kW, wavelength: 10600nm, polarization: circular, pulse frequency: 1-2500Hz, max. cutting capacity steel/stainless steel/aluminum: 25mm/25mm/15mm, weight: approx. 1800kg, laser hours: 10275h. Documentation available. An on-site inspection is possible. Fgedpfx Asy D Trnjd Isd

Year of construction: 2010, condition: new, Wire electrodes Fgsdpfjhq T Iiex Ad Iod ELGACORE - MXA 100 1.4 mm diameter Approx. 60 pieces from stock

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Set for robotic laser welding Scope of supply: 1 x Laserline LDM1200-60 (1320W).(2011). 1 x 2 Way Hyfra CHILLER.(2018). 1 x HIGHYAG LASER WELDING HEAD. Machine can be inspected. Fjdorfucfopfx Ad Iogd Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: new, load capacity: 10,000 kg, rotational speed (distance/time): 1,000 mm/min, Capacity: 10Tn Fodpfx Ajuf A Ahsd Iogd Type: Self-aligning Minimum diameter: 320 mm Maximum diameter: 2.800 mm Wheel dimensions: 300 x 160 mm (Diameter x Width) Wheel coating: Polyurethane rubber Rotation speed (Min.-Max.): 100 - 1.000 mm/min. Motor power: 1,1 KW Inverter: Danfoss Electrical components: Schneider Included: 1 motor-driven + 1 idler Control unit with 6 meter extension pole and digital display with the speed of rotation.

Year of construction: 2023, condition: new, SPR type is the most popular and preferred line of our manipulators by customers. By moving the axis of rotation of the arm above the surface of the mounting plate, the weight of the support arm counterbalances the welding element. This technical solution gives a clear advantage over the PX and BE series. It allows for flexible positioning of the welded element (even "upside down"). Fgjdponqzrpefx Ad Iod STANDARD VERSION: Three-phase powered positioner Arm rotation using a hydraulic rotator Table rotation using an electric rotator Height adjustment of the arm using hydraulic cylinder Control of functions on the positioner case ADDITIONAL OPTIONS: Wired remote control Wireless remote control Pedal on the table rotation cable Smooth table rotation adjustment Rotation negative clamp (positioner case) Length and shape of the arm Possibility of individual configuration of the positioner Control of functions using a teach pendant

Year of construction: 1992, condition: good (used), Geuma welding roller set, welding positioner set type GRS-SPE in neat good working condition consisting of: 1 x driven Fgodpelzcibjfx Ad Iod 3 x guide wheels Specifications: - 7 kW - max capacity 31 tons - diameter idlers 550mm - width 2 wheels side by side 950mm - center of wheels from under frame 340mm - maximum adjustable width 2500mm

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling unit for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Power source serial no.: 9885186 Cooling unit serial no.: 97861? Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Power supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only Fodpst Awm Dofx Ad Isgd - HF ignition - Cooling water unit for torch cooling - 44,895 operating hours (read) - Operating and maintenance manual included Space requirements welding machine (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Sold without accessories The price refers to a set consisting of 1x power source and 1x water cooler.

Year of construction: 2005, condition: ready for operation (used), Cutting dimensions X/Y: 3000mm/2000mm. The cutting head of the machine currently cannot be moved downward or upward. This problem can be resolved with a small spare part. The machine was used in the stone processing industry. Documentation available. An on site inspection is possible. Fgodpfx Ajyypmgod Ijd

Year of construction: 2015, condition: ready for operation (used), A complete longitudinal beam welding system (vehicle carrier) Merkle with a tack welding station, a cooling station and a longitudinal beam welding machine is available. Beam height range: 70mm-500mm, max. beam length: 13700mm, flange width: 120mm/150mm, flange thickness range: 5mm-20mm, web plate thickness range: 3mm-10mm, clear width: 85mm-500mm, web offset at 15° transition: 50mm. 1) Welding system, track length: 20m, rotating device: 0°-45°, total clamping and tack welding range: 14300mm, guide spacing: 500mm, roller conveyor height: 800mm, welding process: MIG/MAG-Pulse-Arc, travel speed: 6m/min, vertical stroke: 800mm, horizontal stroke: 2x270mm, power sources: 2x HighPulse 550 RS, torch: MSB 400W. 2) Tack welding device, tack welding position: 45°, max. changeover time: 10min. 3) Transport and cooling line, tack welding area roller conveyor length: 15000mm, buffer and cooling area roller conveyor length: 15180mm, welding area roller conveyor length: 18055mm, roller diameter tack/buffer/welding: 80mm/80mm/200mm, roller width: 245mm/245mm/2200mm. Documentation vorhanden. An on-site inspection is possible. Fgjdpfx Aeyx H Hned Isd

Year of construction: 2025, condition: new, Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%. Fodpeyx Hpijfx Ad Isgd Due to inverter technology, energy efficiency is higher than the conventional machines. Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases. 4 Wheel Drive system, offers very powerful feedability for longer torches and offers less deformation on soft wires such as aluminum and flux cored wires. Welding voltage, wire feed speed (welding current) is adjusted from the panel in front of the wire feeder. Optimum welding parameters can be obtained from the printed table inside of the wire feed cabinet. Manual wire feeding & gas valve buttons, Trigger Mode (2/4), Spot mode are available on the wire feeder. Soft Start, Pre-gas, Post-gas, Crater Filling, Burn-Back, Flow Sensor settings are adjusted from the digital panel of the wire feeding system. ø300 mm, ø270 mm and ø200 mm spools and drums of any size can be used. 24V AC outlet for CO2 gas heater. Built in gas cylinder platform with large wheels to ease mobility in workshops. The Separate wire feeder standard harness length is 5 m and can be extended up to 30 m upon request (M-MW models). Protected against voltage fluctuations. Designed also for outdoor use, protection class is IP 23. Water cooling unit for water cooled torches provides powerful cooling even at very hot climates. (Water-cooled (W) models) Standard accessories come with the machine.

Year of construction: 2002, condition: ready for operation (used), A complete IGM welding system with robot is available. Robot: IGM RTI 2000, roller stand: IGM RB 300, positioner: IGM RP 300, control system: PLC/KUKA K C2, total system dimensions X/Y/Z: approx. 5250mm/4000mm/2800mm, drive time: 31091h, welding hours: 12930h, waiting time: 99278h, total time: 113051h. Without workpiece fixtures. The 6th axis of the machine can no longer be controlled. Documentation available. An on-site inspection is possible. Expected to be available in May 2026. Fodpfx Asyh Nvasd Isgd

Year of construction: 2007, condition: ready for operation (used), A CNC water cutting system Knuth is available. Cutting dimensions X/Y: 6000mm/2000mm, travel path Z: 250mm, max table load: 600kg/m², max feed rate: 16m/min, positioning accuracy at 500mm: +/-0.05mm, repeatability at 500mm: +/-0.05mm, max operating pressure: 4000bar, total power requirement: 40kW. Machine dimensions X/Y/Z: approx. 6350mm/3250mm/4000mm, weight: approx. 4000kg. Documentation available. An on site inspection is possible. Fgsdpfexxa T Sox Ad Iod

Year of construction: 2023, condition: new, Rotating device for handling components weighing up to 40,000 kg. Component diameter range: 500 mm to 6,000 mm. Rotation speed: 100 to 2,000 mm/min. Fgodpoflmcxjfx Ad Isd Control via handheld remote control (optional: wireless).

Year of construction: 2017, condition: ready for operation (used), Two welding cells are available, each with two KUKA robots, one for workpiece handling and one for the welding process. 1) Welding process: resistance spot welding, robot: 2x KUKA KR 60-3, max. payload: 60kg, max. reach: 2033mm, repeatability: +/-0.06mm, controller: KR C4, axes: 6, power source: Genius HWI 408, max. output current: 600A, rated power: 80kVA, cell dimensions X/Y: approx. 7450mm/5250mm, robot hours 1/2: 4500h/8200h. 2) Welding process: resistance spot welding, robot: KUKA KR300 R2500, max. payload: 300kg, max. reach: 2496mm, repeatability: +/-0.6mm, controller: KR C4, axes: 6, power source: Genius HWI 408, max. output current: 600A, rated power: 80kVA, cell dimensions X/Y: approx. 7450mm/5250mm, robot hours 1/2: 2700h/6100h. Documentation available. An on-site inspection is possible. Individual sale possible. Fgedpfx Adoyv H Exo Ied

Year of construction: 2021, condition: used, NEW PRICE: approx. 110.000€ KR Quantec 6-axis robot incl. KRC4 controller and robot control panel 12m Smart Pad, 3100mm reach, 20Kg payload External axis module for coupled rotary axis, mathematically coupled Fodpfxswgn Dws Ad Iegd Kuka ArcTech Basic package Level 2 advanced TouchSense technology to minimize component tolerances Kuka Wiresense module During oscillation, the voltage is measured by the power source and the welding path is the welding path is shifted if the component warps. * Function only for fillet welds incl. Lorch S5 SpeedPulse XT welding unit incl. automatic torch cleaning station *Cutting device *Cutter *Welding cut-off spray

Year of construction: 2008, condition: ready for operation (used), A Bystronic CNC laser cutting system is available. Travel X/Y/Z: 4020mm/2020mm/170mm, max. sheet weight: 1500kg, positioning speed: 60m/min, simultaneous speed: 80m/min, positioning accuracy: +/-0.1mm, repeat accuracy: +/-0.05mm, laser: CO2, laser source: ByLaser 4400, laser power: 4400W, overall system dimensions X/Y/Z: approx. 8000mm/15000mm/2.5mm, cutting time: 17469h, power on: 35200h. Including two spare cutting heads 7.5in and 5in as well as various spare parts. Documentation available. An on-site inspection is possible. Expected to be available from June 2026. Fgsdpfxoyu T D Ro Ad Ied

Year of construction: 2021, condition: ready for operation (used), A laser cross-welding system is offered. Fiber laser 1500W water-cooled, cooling unit integrated, pallet truck guide, shielding gas supply, weld seam pressing device, remote access RMACC01 SECOMEA, strip width max.: 110mm, strip material: steel: 0.25mm-3.0mm, C steel: 0.25mm-2.5mm, aluminum: 0.25mm-2.5mm, copper: 0.20mm-1.2mm, dimensions W/H/L: 650mm/2054mm/1050mm, weight: approx. 650kg. Inspection possible by appointment. Fgodpfxeyugl Uj Ad Isd

Condition: ready for operation (used), 1 x ENABL SAW circumferential seam C&B, including 1 welding head with 3 wires. Welding range: ø6.5 to ø11 m. Expandable up to ø13 m. 1 system. Already disassembled without power (currently likely without PSU, but a PSU may be available). Inspection welcome north of Flensburg. Fgsdpfoyt Rmgex Ad Ied B2B sale only.

Year of construction: 2010, condition: ready for operation (used), A robot-assisted welding system from Cloos with a Kuka robot is available. Robot weight: 1155kg, control system: Qirox C Romat 520, control weight: 300kg, robot axes: 6. Documentation available. An on-site inspection is possible. Fgodpfx Aoyt N Ayed Iod

Year of construction: 2007, condition: ready for operation (used), Cutting dimensions X/Y: 2000mm/3000mm, Z-axis stroke: 230mm, machine tolerance: +/-0.05mm/m, repeatability: +/-0.025mm/m, simultaneous movement: 56m/min, max. cutting speed: 30m/min, max. material thickness: 200mm, max. load capacity: 790kg/m², max. workpiece weight: 4740mm, max. clamping material thickness: 50mm, max. pump pressure: 3800bar, max. working pressure: 3600bar, machine weight: approx. 11300kg, working hours: 18111h. Documentation available. An on-site inspection is possible. Fedsyttwuopfx Ad Iegd

Condition: new, Year of construction: 2026, functionality: fully functional, The LCW 3000W is a compact and versatile 4-in-1 handheld laser system engineered for high productivity and operator convenience. Designed for industrial use, the machine unites welding, laser cleaning, cutting, and weld seam cleaning capabilities, making it highly suitable for manufacturing, repair, and maintenance environments. This unit is based on a Raycus 3000W fiber laser source and is equipped with an industrial water chiller for stable performance and outstanding reliability. Its touchscreen control system enables rapid parameter adjustments, saving of operating modes, as well as real-time diagnostics and warnings. An additional operator control panel ensures easy modification of parameters during use. The laser head is optimized for both welding and cleaning tasks, featuring optical protection and support for various welding processes, including spot welding, continuous welding, fish-scale welding, and full seam welding. The result is a clean, uniform, and visually appealing weld seam. The machine is also capable of removing rust, paint, resin, oil, dirt, and oxide layers from surfaces. Key Advantages: - 4-in-1 functionality: welding / cleaning / cutting / weld seam cleaning - Raycus 3000W fiber laser source - Handheld laser head for welding and cleaning - 10 m standard optical fiber length (up to 15 m maximum) - Intelligent touchscreen control system - Multi-language user interface - Industrial chiller-based water cooling - Red-light positioning feature - Automatic wire feeder - Supplied with safety glasses, working lens, standard accessories, and a spool of welding wire Technical Specifications: ----- Model: LCW 3000W Laser Type: Raycus Fiber Laser Laser Power: 3000 W Operating Voltage: 380 V Wavelength: 1064 nm Fiber Length: 10 m standard, up to 15 m maximum Welding Speed: 30–120 mm/s Cooling System: Industrial water chiller Ambient Operating Temperature: 15–35 °C Recommended Welding Thickness: 0.5–3 mm Cleaning Width: 0–80 mm Focal Length / Working Distance: 600 mm Applications The machine is suitable for: - Iron - Stainless steel - Aluminum alloys - Other metals Typical uses include: - Welding sheet metal and profiles - Pre-processing surface cleaning Fodpfx Aoyr D A Ejd Iegd - Removal of rust, paint, oil, and oxides - Final weld seam cleaning Scope of Supply LCW 3000W machine complete with: - Handheld laser head - Automatic wire feeder - Laser safety glasses - Additional working lens - Spool of welding wire - Complete set of standard spare parts and accessories