Used other metal cutting saws for sale (115)

Year of construction: 2007, condition: ready for operation (used), Cutting range round: 560mm, cutting range flat (W x H): 620/560mm, material feed length, single: 900mm, multiple feed: 9999mm, shortest cut length: 6mm, minimum diameter to be cut: 15mm, minimum remnant in single cut: 15mm, shortest remnant length in automatic mode: 80mm, saw motor power, frequency-controlled: 5.5kW, cutting speed, stepless: 13-127m/min, saw blade dimensions: 7400/54/1.6mm, material support height: 700mm, total drive capacity in basic configuration: 12kW, length: 2370mm, width: 3610mm, overall dimensions with chip conveyor (L/W): 2370/3610mm, machine table height lowered: 2230mm, weight: approx. 5.2t with chip conveyor. An inspection on site is possible. Iijdpoxg Rhvefx Ahysh

Condition: excellent (used), Year of construction: 2002, ALU-profile mitre saw Fabr.Dry Tech Type:355 MLS Year 2002. Saw blade dm.355 mm Cutting range round max.120 mm Square max 120 mm X 120 mm Iiodpotwn E Uofx Ahyoh

Condition: ready for operation (used), A Tmj mitre-cutting band saw is offered. Cutting capacity at 90° round: 500mm, cutting capacity at 90° square X/Y: 500mm/500mm, cutting capacity at 45° round: 370mm, cutting capacity at 45° rectangular X/Y: 500mm/370mm, cutting capacity at 60° round: 250mm, cutting capacity at 60° rectangular X/Y: 500mm/250mm, mitre range: 90°-60°, saw blade dimensions X/Y/Z: 5620mm/41mm/1.3mm, max. cutting speed: approx. 100m/min, max. length stop: 1000mm. Dimensions X/Y/Z: approx. 2800mm/1260mm/2300mm, weight: approx. 1550kg. Inspection possible by prior arrangement. Iedpfx Ahszrzpboysih

Condition: ready for operation (used), Offered for sale is a fully automatic KASTO vertical bandsaw. Round cutting capacity: 10mm-260mm, max. square cutting capacity X/Y: 260mm/260mm, min./max. cut-off length: 5mm/600mm, feed length: 600mm, min. remnant length: 10mm, max. cutting speed: 125m/min, saw blade dimensions X/Y/Z: 4115mm/41mm/1.3mm, control: KASTO minipos 807, weight: approx. 2200kg. Inspection by appointment is possible. Ijdpfx Ahozrzn Reyjih

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Year: 2021 Isdpfx Ahsy A Htpeyeih - technically efficient, ready to work – after full service - disc diameter: 600 mm - cut from below - cooling installation - vertical pneumatic clamps - work area lighting - compressed air preparation station

Condition: used, Year of construction: 2000, machine/vehicle number: xxxx, Order No. 22510 Technical Specifications: Isdpfjv I T Dajx Ahysih - Sawblade dimensions 315 x 2.5 x 32 mm - 2 sawblade spindle speeds approx. 40 + 80 rpm - Cutting range at 90°: round 95 mm - flat 110 x 70 mm - at 45°: round 90 mm - flat 85 x 70 mm - Miter adjustable left + right up to 45° - Material clamp - Drive 400 V / 0.75 / 1.3 kW - Space required approx. W 700 x H 1400 x D 700 mm - Weight approx. 200 kg

Year of construction: 2004, condition: ready for operation (used), A fully automatic Kasto band saw system is available. Cutting range at 90°: round material: 530mm, square material: 530mm/530mm, flat material: 530mm/640mm, saw blade length: 7675mm, saw blade width: 54mm, saw blade thickness: 1.6mm, cutting speed: 120m/min. Overall system dimensions X/Y/Z: approx. 5200mm/2700mm/2700mm, weight: approx. 6000kg. Including roller conveyors. Documentation available. On-site inspection is possible. Iisdpfx Ahjv S E Edeyeh

Year of construction: 1997, condition: ready for operation (used), A very well-maintained Forte horizontal band saw is available. Round cutting capacity: 320mm, max. square cutting capacity: 300mm/300mm, saw blade dimensions X/Y/Z: 3660mm/25mm/0.9mm, band speed: 100m/min, max. material feed: 400mm, max. feed length: 4000mm. Machine dimensions X/Y/Z: approx. 1950mm/1500mm/1250mm, weight: approx. 1000kg. Including roller conveyor. The machine was used in a training workshop and is in good condition. Including five bandsaws. Documentation vorhanden. An on-site inspection is possible. Iijdpfezka Iyjx Ahyjh

Condition: used, TECHNICAL DETAILS - Machine floor space : 1700x1200 [mm] - Machine height : 1500 [mm] - Machine weight : 880 [kg] - Wheel diameter : up to 250 [mm] - Wheel thickness : approximately 0.2 to 1 [mm] Iiedpfx Ajxb Engshyjh - Machinable diameter : up to 30 [mm] - Cutting length : from 0.5 to 400 [mm]

Year of construction: 2018, condition: refurbished (used), Flying cutoff unit TCC 120/168, made by OTO MILLS Recently revamped Complete flying cutoff unit including: - Accelerator (carriage transmission) - Main carriage motor - Cutoff unit TCC120 with base with linear guides, cutting head, clamping unit and support for tube at exit side - Control panel RENEWED - Electrical cabinet RENEWED - Hydraulic group - Cable chain - All existing documentation, manuals, drawings Specifications: - Type of saw : Friction - Material thickness : 1 –6 mm - Standard tube length : 3 –12 m - Diameter range : 42 –168 mm - Square tubes : 40x40 –130x130 - Rectangular tube : 50x30 –180x80 - Max. speed : 120 m/min - Length tolerance : +/-2 mm Round tube diameter: 42 – 168 mm Square tube diameter: 40×40 – 130×130 mm Rectangular tube diameter: 50×30 – 180×80 mm Iodpfxevtpp No Ahyjih Material thickness: 1 – 6 mm Tube length: 3 – 12 m Type of saw: Friction Length tolerance: +/-2 mm Max. speed: 120 m/min

Year of construction: 2020, condition: ready for operation (used), Saw blade diameter: 2x400mm, max. cutting length: 4000mm, cutting angle: +/-45°. Documentation available. On-site inspection is possible. Iisdpfx Aowfg Hbehyoh

Year of construction: 2002, condition: ready for operation (used), Offered is an aluminum miter circular saw. Saw blade diameter: 550mm, power: 4000W, speed: 2800rpm, control: manual with digital display for cutting angle. Equipped with extraction hose, noise protection enclosure. Weight: approx. 750kg, overall dimensions X/Y/Z: approx. 1400mm/1500mm/1900mm. Inspection possible by arrangement. Iijdpfsy Uyfpsx Ahyjh

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/7/CAR + RA1 SCOPE OF SUPPLY 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Single collecting cradle RA1, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. 4 Main electrical cabinet and operator control panel 5 Safety barriers around the machine & photelectric barriers & emergency line. Note: Safety barriers were installed by owner to have the machine under “safety conformity” TECHNICAL SPECIFICATIONS Manufacturer: MAIR Iedpfx Aoymax Eehyeih Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Spain Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp

Condition: used, Multihead cutting machine TRA2000/7/7, made by MAIR Including: 1) Loading table 2) Cutting machine with 7 cutting heads 3) Operator control panel 4) Unloading bin Optional to be build new upon requirement : 5) Double output craddle 6) New electrical control panel with frequency converters for cutting motors 7) Sound and safety protection cover Max. tube length: 7.500 mm Iisdpfxjymaypj Ahysh Max. loading capacity: 2.000 kg Round tubes (outer ø): 12 – 50 mm Square tubes (hxw): 12×12 – 40×40 mm Rectangular tubes (hxw): 12×16 – 50×30 mm Max. thickness: 2,5 mm Length of tubes to be cut: 330 – 7.400 mm Number of cutting heads: 7

Year of construction: 1999, condition: ready for operation (used), Saw blade diameter: 350mm, cutting range at 90°: round: 110mm, square: 85mm/85mm, flat: 180mm/85mm, cutting range at 45°: round left/right: 105mm/110mm, square left/right: 85mm x 85mm/85mm x 85mm, flat left/right: 130mm x 85mm/130mm x 85mm. Saw blade bore: 40mm, speed: 74rpm, working height: 925mm. Dimensions X/Y/Z: 1150mm/1500mm/2100mm, weight: approx. 500kg. Isdetufcdjpfx Ahyjih

Year of construction: 1998, condition: ready for operation (used), Feed rate: 50-1000 mm/min, operating voltage: 3x 400 V, control voltage: 24 V, rated current: 12 A. On-site viewing is possible. Ijdoyln A Nspfx Ahyoih

Condition: ready for operation (used), A Daiß + Partner CNC automatic band saw with a double-miter twin-column design is offered. Cutting capacity X/Y: 500mm/320mm, saw blade dimensions: 4700mm/34mm/1.1mm, feed length: 2000mm, rapid traverse: approx. 12m/min, blade speed: 15-105m/min, CNC control: PS 210. Equipment: powered chip brush, Power-Box hydraulic cutting pressure adjustment, Micro-Cooler coolant spray system, hydraulic saw blade tensioning and saw blade breakage monitoring. An on-site inspection is possible. Ijdpfjznc N Uex Ahyeih

Condition: used, The MG TLG single-head up-cut saw is equipped with a Ø 350 mm blade and a rotating table for cuts at 45°, 90°, and intermediate angles. The machine offers a maximum cutting height of 125 mm. Technical Specifications Blade diameter: 350 mm Table rotation: 45° – 0° – 90° Pneumatic clamps Three-phase motor 220/380 V or single-phase 220 V Motor power: 2 HP (three-phase) / 1.5 HP (single-phase) Cutting speed: 42 m/s Built-in automatic lubrication system Maximum cutting height: 125 mm Movable support turret Iisdpfxozcfdxj Ahysh Dimensions Length: 800 mm Width: 700 mm Height: 1,225 mm Weight: 150 kg

Year of construction: 2025, condition: refurbished (used), REVISED by RSA in 2025 Revised & Cleaned & Repainted Replacement of wear parts Tested in our facilities in production prior to shipment Round: Ø 8 – 90 mm Rectangular: 10×10 – 75×75 mm Square: 10×15 – 70×80 mm Cutting & deburring lengths : 100 – 1.000 mm One heavy duty RSA cutting unit model NC2001 with : -Bundle loader, size approx. 600 x 600 mm, usable length approx. 6.200 mm and maximum bundleweight 3.000 Kg -Double feeding rolls -Heavy-duty cutting motor and gear box, with 5,5 kW motor; cutting motor speed 30-250 rpm -CNC movement up/down for precision cutting. (new version, NO hydraulics) -Hydraulic regulation in clamping units -1 Full automatic adjustable length control with CNC stopper One deburring unit RASAPLAN 1000 with : -Automatic length adjustment according to cut length -Synchronised chain transport -Integrated dust exhaust unit Electric : Isdsvtpd Tspfx Ahyoih -Program for short lengths -Special program module for calculation of swivelling discharge -Operator panel Siemens OP 17 -Combined cooling through spray mist & jet cooling -Servo axes Revised: 2024 Round: 8 – 90 mm Rectangular: 10×10 – 75×75 mm Square: 10×15 – 70×80 mm Cutting & deburring lengths: 100 – 1.000 mm

Year of construction: 1998, condition: good (used), machine/vehicle number: 080024-38 U, Offer 23332 Technical data: - Saw blade dimension 250 x 2 x 40 mm - Saw blade spindle speed 52 rpm - cutting range at 90° round 80 mm - flat 95 x 60 mm - miter adjustable up to 45 ° Iijdpfx Aep Ebn Sohyeh - Material vice - Drive 400 V / 0,5 kW - Space requirement approx. W 650 x H 1500 x D 750 mm - Weight approx. 100 kg

Year of construction: 2007, condition: ready for operation (used), Saw blade diameter: 450mm, cutting range 90° round/ square/ profiles: 160/ 145/ 320x50mm, cutting range 45° round/ square/ profiles: 160/ 130/ 250x40mm, cutting speed: 1950/ 3900m/min, feed speed: 0-3000mm/min, mitre range: 0° to 90°, swivel range: 180°, weight: approx. 1.5t. On-site inspection is possible. Iisdpfx Aowa Tiljhysh

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/8 Scope of supply: 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Double collecting cradle RA3, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. Note: with the double craddle system, it is possible to make the bundling and strapping in collecting craddle nº1, while production continues, without machine stop. 4 Main electrical cabinet and operator control panel NOTE:  This machine has worked very few hours.  Mechanical condition is very good.  It only requires cleaning & repainting to be “as new” Max. input tube length: 8000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-40x40 mm Rectangular tubes (HxW): 12x16-50x30 mm Thickness Min.-Max.: 0.8 - 3.0 mm (depending on yield) Iisdpfx Aoymaw Uehysh Cutting lengths: 330 - 7900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 8 Motors power: 2.2 kW Cutting disc diameter: 300 mm

Condition: used, Band Saw SABI Iiedpsupkh Iefx Ahyeh 4 KGM

Condition: used, functionality: fully functional, Krauss & Reichert RBO20 Band Saw Ijdpfx Aov Sk Nhshyjih Knife length: 3,55 Good working condition. Please check out our other listings as well.

Condition: used, TECHNICAL DETAILS - As per photos Iedpfjuhaaisx Ahyeih