Used Tsugami for sale (22)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 25,919 h, General Data Measurements width 1850 mm Measurements depth 2470 mm Measurements height 1930 mm Ledpfx Afoxq Huyo Esru Machine weight 6000 kg Control Unit Brand FANUC Model Series 0i-TF Movement X-Axis Rapid Traverse 24 m/min Y-Axis Rapid Traverse 12 m/min Z-Axis Rapid Traverse 27 m/min X-Axis Movement 221 mm Z-Axis Movement 400 mm This 4-axis TSUGAMI M08SYE-II turn-mill centre was manufactured in 2017. It features a maximum machinable diameter of 280 mm, a machining length of 380 mm, and dual spindle speeds up to 4500 rpm. Equipped with a 12-station turret and a robot for part feeding, it offers efficient processing capabilities. Consider the opportunity to buy this TSUGAMI M08SYE-II turn-mill centre. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Year of construction: 2003, Tsguami BS18DE(S)-III CNC automatic lathe Ledpfsq E Ra Sex Af Eoru Good condition Incoterms EXW CH-4528 Zuchwil The complete photo gallery and the technical data can be found in the attached catalog. No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: used, Year of construction: 2012, machine/vehicle number: IntNr230381, used CNC Tsugami HS2075AX with B-axis, year of manufacture 2012 Lrsdpfxexl U Eps Af Esu Operating hours: 7,200 Control: Fanuc 31i-A Maximum machining length: 250 mm Number of controlled axes: 7 (up to 5-axis simultaneous machining) B-axis: 0°–130°, freely programmable Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: available on both main and counter spindle Number of linear tool carriers: 2 Total number of tools: 35 Dimensions (LxWxH): 2,110 x 1,200 x 1,885 mm Weight: 3,300 kg Convertible between long and short turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear turret with Y-axis Cross-drilling on rear side Chip conveyor Fire suppression system FMB Minimag 20 bar feeder, year 2012 The machine can be inspected under power by prior arrangement. Technical data and information are subject to change and error; prior sale reserved.

Condition: excellent (used), Year of construction: 2008, Type: CNC Lathe - horizontal Manufacturer: Tsugami Type: M50SYE-III Year of manufacture: approx. 2008 Control: Fanuc 18i-TB Serial number: 5078 Hours: Control on: 94,600 h / Automatic time: 59,000 h / Feed time: 17,600 h Accessories: Standard, jaw chuck, chip conveyor, driven and rigid holders, documentation Machine condition: very good Control system: Fanuc 18i-TB Lrjdjvccxiopfx Af Eou Number of simultaneous axes: 5 (C, X, Z, Y, & A) Number of simultaneous axes according to export control: 4 (X, Z, Y & C) Linear axes: 3 (X, Z & Y) Rotary axes: 1 (C) Parallel axes: 1 (A) Accuracy / repeatability X, Z & Y: 0.03 / 0.02 mm X-axis travel: 170 [mm] Z-axis travel: 400 [mm] Travel distance A-axis: 520 [mm] Y-axis travel: +/- 50 [mm] Diameter of the spindle passage: 51 [mm] Max. spindle speed: 6000 [rpm] Indexing accuracy C-axis: 0.001 [°] Spindle power: 7.5 / 11 [kW] Max. Counter spindle speed: 6000 [rpm] Indexing accuracy C-axis counter spindle: 0.001 [°] Counter spindle power: 7.5 / 11 [kW] [kW] Number of turret stations: 12 (all driven) Accessories: Standard, chip conveyor with pump, collet chuck counter spindle, large holder package incl. driven holders & documentation

Condition: used, Year of construction: 2018, Lathes Travel distance X: 221 mm Travel distance Y :100 mm Travel distance Z: 400 mm turning length: 380 mm max. circulation diameter: 280 mm spindle boring: 65 mm input Power: 11 kW max. turning moment: 80 NM range of revolution from: 100 rpm range of revolutions till: 4500 rpm Control: Fanuc 0i-TF Powered tools: 12 working hours approx: 813 h Lsdpew Ekimsfx Af Ejru control Fanuc Scrapper chip conveyor

Condition: used, Year of construction: 2012, Technical details: turning diameter over bed: 20 mm spindle passage: 3-20 mm turning length: 250 mm control: FANUC 31 i-A main-spindle speed: 10.000 1/min subspindle speed: 10.000 1/min Main spindle capacity: 3,7 kW subspindle power: 2,2 kW number of tools: 35 weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,11 x 1,2 x 1,89 m CNC sliding headstock turning/milling centre with B-axis Control system: Fanuc 31i-A Machining length: max. 250 mm Number of controlled axes: 7 axes and max. 5 axes simultaneously B-axis: 0°-130° freely programmable Rod passage: Ø 3 mm to max. Ø 20 mm Drive power main spindle: 3.7 kW Drive power counter spindle: 2.2 kW Lrjdovivx Nopfx Af Eou Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: Main and counter spindle Number of linear supports: 2 pieces Total number of tools: 35 pieces Dimensions (LxWxH) in mm: 2,110×1,200×1,885 Weight: 3,300 kg Conversion from long to short turning Deep hole drilling stations NAKANISHI high-speed spindle Rear slide with Y-axis Cross drilling rear side Chip conveyor Fire extinguishing system FMB bar loader Minimag 20, year 2012 Approx. 7.200 working hours *

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 1675 Measurements depth 2020 Measurements height 2020 Machine weight 3400 Control Unit Brand FANUC Model 32i-B CNC Main Drive Ledexg Umiopfx Af Eoru Spindle speed range 8000 Number of axis 6 This 6-axis TSUGAMI HS32 swiss type turning machine was manufactured in 2011. It features a maximum bar capacity of 32 mm and is equipped with a Fanuc 32i-B CNC control system. The main and sub-spindle speeds reach up to 8,000 rpm, with live tool speed up to 5,000 rpm. Consider the opportunity to buy this TSUGAMI HS32 swiss type turning machine. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Year of construction: 2001, Tsugami BS12-III CNC sliding headstock automatic lathe TECHNICAL DATA turning diameter: 3-12 mm Turning length: 170 mm Max. Bore diameter: 7 mm Max. Internal thread diameter: M6 Speed: 12`000 rpm Speed, counter spindle: 6`000 rpm Number of axes: 6 Dimensions: approx. 190 x 130 x 220 mm Weight: 2200 kg Lrjdpfeq H Ea Usx Af Eou No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 210 [mm] - Spindle speeds : 200 - 10000 [rpm] - Spindle power : 2.2 / 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] Ledpfouhbbzsx Af Esru - Spindle speeds : 200 - 12000 [rpm] - Spindle power : 2.2 / 3.7 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 5 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] GUIDE BUSH HOLDER 2 - Number of positions : 3 END ATTACHMENT - Number of positions : 8 SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 2 - Live tools speed : 8000 [rpm] POWER SUPPLY - Total installed power : 11 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1655 x 1125 [mm] - Machine height : 1700 [mm] - Machine weight : 2000 [kg] MACHINE HOURS - Number of working hours : 13.837 [h] EQUIPMENT - CNC : Fanuc Oi-TD - 3 colors status lamp - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Chips conveyor - Coolant tank * with high-pressure pump : 70 [bars] - Bar loader : IEMCA ELITE 220 E / 32 LL - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Year of construction: 1992, condition: used, You can check under power, after scheduling an appointment. Dismantling, moving and transporting the machine is entirely the customer's responsibility. We can help with loading as needed. Parity: EXW Székesfehérvár. TSUGAMI NP-32 CNC Lathe Machine Machining rangers Machining diameters 8 to 32 mm Maximum machining length 210 mm (one stroke) Maximum hole diameter 20 mm (drill) Maximum thread diameter M14 (tap) Slide travel X1 slide (front slide) 85 mm (80 + 5) X2 slide (rear slide) 115 mm (110 + 5) Z1 slide (headstock) 215 mm Rapid-traverse speed For X1, X2 and Z1 slides 8m/min Main spindle Rotation speed Lrodpfoidqvcex Af Eeu For heavy-duty cutting (standard) 35 to 4,500 rpm (stepless) For high-speed cutting (optional) 60 to 8,000 rpm (stepless) Bore diameter of chuckoperating tube 36 mm Minimum indexable angle (commandable value in degrees) 5/0.00 (C-axis) C-axis rapid-traverse speed -/60rpm Spindle-center height 900 mm Turrets Number of turrets 2 Number of tool-mounting stations 12 (6 stations x 2) Number of rotary-tool-mounting stations 12 (all stations on front and rear turret) Tool sizes Turning tools 16 (square) x 80 mm Drill-holder hole diameter 35 mm Indexing method Random Rotary-tool spindle speed For heavy cutting 224 to 2,240 rpm (stepless) For high-speed cutting 475 to 4,750 rpm (stepless) Machining rangers Machining diameters 8 to 32 mm Maximum machining length 210 mm (one stroke) Maximum hole diameter 20 mm (drill) Maximum thread diameter M14 (tap) Slide travel X1 slide (front slide) 85 mm (80 + 5) X2 slide (rear slide) 115 mm (110 + 5) Z1 slide (headstock) 215 mm Rapid-traverse speed For X1, X2 and Z1 slides 8m/min Main spindle Rotation speed For heavy-duty cutting (standard) 35 to 4,500 rpm (stepless) For high-speed cutting (optional) 60 to 8,000 rpm (stepless) Bore diameter of chuckoperating tube 36 mm Minimum indexable angle (commandable value in degrees) 5/0.00 (C-axis) C-axis rapid-traverse speed -/60rpm Spindle-center height 900 mm Size & weight of machne Machine size ( L x D x H ) 2,900 x 1,650 x 1,615 mm Machine weight 3000 kg Required total electrical capacity 25 KVA Required air volume and pressure 100NL/min. at not less than 4.5 kg/cm² Year of manufactured 1992 Serial number 9502 Sub-spindle Maximum thread diameter M12 (brass) Machining diameters 8 to 32 mm Spindle stroke (Z2-axis) 215 mm Spindle speed 300 to 3,000 rpm Spindle motor 1.5 kW 4P (inverter) Motors For main spindle 5.5/7.5 kW (AC spindle motor) For attachment drive: Front 0.75kW 4P (inverter type) Rear 1.5kW 4P (inverter type) For hydraulic motor 0.75kW 4P For coolant pump 0.25 kW For lubricating-oil pump 4 W Tanks For hydraulic oil 30 liters For coolant 150 liters For lubricating oil 2 liters Size & weight of machne Machine size ( L x D x H ) 2,900 x 1,650 x 1,615 mm Machine weight 3000 kg Required total electrical capacity 25 KVA Required air volume and pressure 100NL/min. at not less than 4.5 kg/cm² Year of manufactured 1992 Serial number 9502 Freight basis: EXW, unpackaged

Condition: excellent (used), Year of construction: 2016, operating hours: 17,714 h, functionality: fully functional, machine/vehicle number: 107, Turning center TSUGAMI HS20M-5AX with Fanuc 31i Model B5 control and LNS loading magazine Express 320 S2 (year of manufacture 2017), Kraft+Bauer fire protection system, chip conveyor TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 2.2 / 3.7 [kW] - Spindle speed: 200 - 10000 [rpm] - Max. bar diameter: 20 [mm] - Minimum resolution C-axis: 0.001 [degrees] COUNTER SPINDLE - Spindle drive power: 1.5 / 2.2 [kW] - Spindle speed: 200 - 12000 [rpm] - Minimum resolution C-axis: 0.001 [degrees] * Travel X/Z : 488 / 335 [mm] TURNING-MILLING SPINDLE - Travel X/Z : 289 / 305 [mm] - Travel Y : 75 (-15/+60) [mm] - Stroke axis B : 180 [degrees] - Minimum resolution B-axis : 0.001 [degrees] - Tool type : 15T - Spindle speed : 300 - 30000 [rpm] - Spindle drive power : 3.7 / 5.5 [kW] TOOL CHANGER - Tool changer type : Umbrella - Number of tools in the magazine : 24 WEIGHT AND DIMENSIONS - Machine weight : 2,700 [kg] Lredpfx Asvyzuqjf Eeu MACHINE HOURS - Operating hours : 17,714 hours - Total parts: 130.317 ACCESSORIES - Control: Fanuc 31i Model B5 - 3-color status lamp - Coolant tank: Hydro-Fluid HP3 * with high pressure pump: 40 - 170 [bars] - Chip conveyor - Spindle cooling - Parts removal - Parts conveyor - Bar magazine: LNS EXPRESS 320 S2 - Fire extinguishing system * * NB: Functionality not guaranteed. Have it checked by a qualified company of the buyer. - Electric transformer

Condition: good (used), Tsugami Swiss Type CNC Lathe Model B038T Lsdperbl Ehefx Af Esru (2) machines available 2019 and 2021. Identical machines.  Attached are photos of the 2019 machine Sliding headstock 12 axis (9 standard cutting axis plus 3 axis turret) 8 station turret (3 axis) 5,000 RPM Main Spindle 7,000 RPM Sub Spindle 5,000 RPM Front Tool Post Cross Drill Speed 6,000 RPM Back Tool Post Live Tool Speed 15 HP Main Spindle 7.5 HP Sub Spindle Equipped with: Fanuc Series 31i Model B CNC Control LNS Chip Conveyor 12' FMB Turbo 3-38 Bar Feed Parts Conveyor High Pressure Coolant (MP Systems)   Feel free to inspect under power. Sold as is where is, inspections are welcomed Buyer responsible for prepping machine for shipping Brand new B038T replacement cost is over $426,000 (with the same options) with 4 – 5 month lead time.

Condition: ready for operation (used), Year of construction: 2012, General Data Machine weight 8500 kg Main Drive Spindle speed range 6000 Spindle bore 51 mm Tool taper CAPTO C4 Number of axis 9 Movement X-Axis Rapid Traverse 50 m/min Y-Axis Rapid Traverse 50 m/min Z-Axis Rapid Traverse 36 m/min This 9-axis TSUGAMI TMB 2E swiss type turning machine was manufactured in 2012. It features a main and counter spindle both with speeds up to 6,000 rpm and 11 kW power. The machine includes a 16-position turret and a milling spindle that reaches 10,000 rpm. It supports rapid traverse rates up to 50 m/min on X and Y axes, and 36 m/min on Z-axis. Consider the opportunity to buy this TSUGAMI TMB 2E swiss type turning machine. Contact us for more information. Application Types Turning Lrsdoxgi Uhopfx Af Eju

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 21047A, spindle speed (min.): 10,000 rpm, turning length: 210 mm, overall weight: 2,050 kg, bar passage: 20 mm, equipped with Iemca Boss 338HD/32 barfeed new in 2017 – fixed and rotating bushing – evacuation of long pieces through the sub spindle + external apparatus – chip conveyor – some collets and guide bushings – Fanuc 32i-B Control. Lodpfxowt Th Ie Af Ejru

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Max. machining length : 320 [mm] - Spindle speeds : 8.000 [rpm] - Spindle power : 3.7 / 5.5 [kW] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Spindle speeds : 8.000 [rpm] - Spindle power : 2.2 / 3.7 [kW] - C axis indexing precision : 0,001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 9 - Number of motorized positions : 4 - Live tools speed : 6.000 (T01-T02-T03) / 4000 (T04) [rpm] - Live tools power : 1 [kW] - X/Y stroke : 142 / 348 [mm] GUIDE BUSH HOLDER 2 - Number of positions : 3 GUIDE BUSH HOLDER WITH AXIS B - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 5.000 [rpm] - Live tools power : 1 [kW] - Stroke axis B : 0 - 135 [°] SECONDARY OPERATION - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 6.000 [rpm] - Live tools power : 1 [kW] END ATTACHMENT - Number of positions : 2 - Number of motorized positions : 2 - Live tools speed : 8000 [rpm] - Live tools power : 1 [kW] POWER SUPPLY - Total installed power : 21 [kVA] WEIGHT & DIMENSIONS Lrsdpjwdalnjfx Af Eou - Machine floor space : 2.150 x 1.280 [mm] - Machine height : 2.010 [mm] - Machine weight : 3.600 [kg] MACHINE HOURS - Number of hours under power : 37855 [h] - Number of working hours : 9578 [h] EQUIPMENT - CNC : Fanuc 31i-B5 - Interface : RS232 / PCMCIA / RJ45 / USB - Rotating guide bush - Parts catcher - Ejection of workpiece - Parts conveying strip - Chips conveyor - Coolant tank : MULLER COMBILOOP CL2 * with high-pressure pump : 100 [bars] - Bar loader : IEMCA BOSS 338 HD / 32 LL - Electric transformer

Condition: excellent (used), Year of construction: 2001, spindle bore: 20 mm, Machine in perfect condition. Lredpfx Afsu Ivw Te Eeu Can be inspected during production any time

Condition: excellent (used), Year of construction: 2013, operating hours: 34,907 h, functionality: fully functional, machine/vehicle number: 107, TSUGAMI HS20M-5AX turning center with Fanuc 31i Model B5 control and LNS loading magazine, Siemens fire protection system, chip conveyor Ledpfx Afeva Ac Ae Eoru TECHNICAL DATA - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Spindle drive power : 2.2 / 3.7 [kW] - Spindle speed : 200 - 10000 [rpm] - Max. Bar diameter : 20 [mm] - Minimum resolution C-axis : 0.001 [degree] COUNTER SPINDLE - Spindle drive power : 1.5 / 2.2 [kW] - Spindle speed : 200 - 12000 [rpm] - Minimum resolution C-axis : 0.001 [degree] * Traverse path X/Z : 488 / 335 [mm] TURNING-MILLING SPINDLE - Travel X/Z : 289 / 305 [mm] - Travel Y : 75 (-15/+60) [mm] - Stroke B axis : 180 [degrees] - Minimum resolution B-axis : 0.001 [degree] - Tool type : 15T - Spindle speed : 300 - 30000 [rpm] - Spindle drive power : 3.7 / 5.5 [kW] TOOL CHANGER - Tool changer type : Parapluie - Number of tools in the magazine : 24 WEIGHT AND DIMENSIONS - Machine weight : 2,700 [kg] MACHINE HOURS - Operating hours : 34907 hours - Total parts : 315277 ACCESSORIES - Control : Fanuc 31i Model B5 - 3-color status light - Coolant tank : Hydro-Fluid HP3 * with high pressure pump : 40 - 170 [bars] - Chip conveyor - Spindle cooling - Parts removal - Parts conveyor - Bar magazine : LNS EXPRESS 220 S2 - Fire extinguishing system * * NB: Functionality not guaranteed. By by a qualified company of the purchaser. by a qualified company of the buyer. - Electrical transformer

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 300565, Tsugami SS327-5AXIII Mfd. Nov. 2020 Fanuc Series 31i-Model B5 IEMCA Boss 338 HD Run less than one shift Cut Steel Lodpevnf Rfsfx Af Ejru Standard tooling included

Condition: excellent (used), Year of construction: 2018, operating hours: 21,500 h, functionality: fully functional, Tsugami BO205E-III incl. Iemca Smart 320 loading magazine Conversion from long to short lathe possible High-pressure pump with 4 controllable valves Lredpfewdru Iox Af Eeu Fire extinguishing system -available immediately-

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, The positions of the rotating tools are: T01-02-03-04 / T22-23 / T34-35 - equipped with Iemca Boss 332E/32 new in 2006 - lot of collets / guide bushes - MSC-501 Control - the machine has always worked with oil. Lredswpu Etjpfx Af Eju

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Spindle power : 2.2 / 3.7 [kW] - Spindle speeds : 200 - 10000 [rpm] - Max. bar diameter : 20 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 1.5 / 2.2 [kW] - Spindle speeds : 200 - 12000 [rpm] - C axis indexing precision : 0.001 [°] * X/Z stroke : 488 / 335 [mm] TURNING-MILLING SPINDLE - X/Z stroke : 289 / 305 [mm] - Y stroke : 75 (-15/+60) [mm] - B Axis stroke : 180 [°] - B axis indexing precision : 0.001 [°] - Tool type : 15T - Spindle speeds : 300 - 30000 [rpm] - Spindle power : 3.7 / 5.5 [kW] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 24 SECONDARY OPERATION Number of positions : 4 Number of positions : 3 WEIGHT & DIMENSIONS - Machine weight : 2.700 [kg] MACHINE HOURS - Number of hours under power : 12249 [h] - Number of working hours : 1816 [h] Ledpfx Afswd Ud Es Ejru EQUIPMENT - CNC : Fanuc 31i Model B5 - 3 colors status lamp - Coolant tank - Parts catcher - Parts conveying strip - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 Lredpfx Afeu Uu Syj Esu MAIN SPINDLE - Spindle power : 2.2 / 3.7 [kW] - Spindle speeds : 200 - 10000 [rpm] - Max. bar diameter : 20 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 1.5 / 2.2 [kW] - Spindle speeds : 200 - 12000 [rpm] - C axis indexing precision : 0.001 [°] * X/Z stroke : 488 / 335 [mm] TURNING-MILLING SPINDLE - X/Z stroke : 289 / 305 [mm] - Y stroke : 75 (-15/+60) [mm] - B Axis stroke : 180 [°] - B axis indexing precision : 0.001 [°] - Tool type : 15T - Spindle speeds : 300 - 30000 [rpm] - Spindle power : 3.7 / 5.5 [kW] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 24 SECONDARY OPERATION Number of positions : 4 Number of positions : 3 WEIGHT & DIMENSIONS - Machine weight : 2.700 [kg] MACHINE HOURS - Number of hours under power : 52500 [h] - Number of working hours : 11639 [h] EQUIPMENT - CNC : Fanuc 31i Model B5 - 3 colors status lamp - Coolant tank : Hydro-Fluid HP3 * with high-pressure pump : 40 - 170 [bars] - Chips conveyor - Spindle cooling unit - Parts catcher - Parts conveying strip - Bar loader : LNS EXPRESS 220 S2 - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer