Metal crosscut saw

HUVEMA HU 315

Condition: good (used), Year of construction: 2016, saw-blade dia. 315 mm cutting capacity - round 100/ 90° mm cutting capacity - square 90 x 90 /90° mm cutting capacity - flat 85 x 110 / 90° mm cutting capacity - flat 85 x 85 / 45° mm cutting capacity - round 100 / 45° mm cutting capacity - square 85 x 110 /45° mm saw blade turning speeds 25 / 50 U/min voltage 400 V / 50 Hz Motor output 1 kW machine weight ab. 0,24 t Dimensions (L/W/H) 980 x 790 x 780 mm • unused exhibition machine Lhsdpsvxlkasfx Ag Rep • saw is fitted on a lower frame, • 2-step motor, • pneumatical quick clamping vise, • material back stop, • coolant device, • mitre ability: 45° left, 45° right

Condition: new, cutting diameter 240 mm dimensions of saw-band 2730 x 27 x 0,9 mm table height 920 mm cutting speed 35 + 70 m/min 240 mm stroke back stop 230 mm cross-slide 270x230 210 Impact energy 200 Air consume per blow 200x210 130 mm 130 mm 130x160 mm total power requirement 1,2 kW weight of the machine ca. 0,26 t dimensions of the machine ca. 0,9 x 1,6 x 1,74 m • miter left 60° • Quick-release vise with quick-release device a. • Quick release lever for easy handling • Frame and gear made from one piece, very quiet cut and very low vibration • Electrical monitoring of band tension and band breakage, saw band cover. • Carbide saw band guide Lsded Iip Sepfx Ag Rehp • Large machine bed • Machine base (disassembled) with automatic cooling The AutoCut system consists of: Hydraulic cylinder, feed control, spring assembly, limit switch Automatic saw frame lowering via the hydraulic Cylinder, continuously adjustable feed, with limit switch at the end of the cut. Rapid lowering of the saw frame from the rest position to the workpiece, then toggle to normal saw feed (e.g. for scribing). Manual operation: The hydraulic cylinder works as a brake cylinder (e.g. for notching). Through the brake cylinder the saw can be positioned in any position during the return stroke.

Condition: new, Year of construction: 2024, Ring Rolling machine ZOPF - model ZB 30/3 MD TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - manual adjusting of the center roller - working position horizontal and vertical (optional) - digital readout Lhedpfxedktnve Ag Rsp - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 20 mm - roller diameter: 76-86 mm - shaft rpm: 11 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 0,18 kW - adjusting way: 35 mm - weight: 85 kg - dimensions: 530x420x500 mm

Condition: new, Ring roller machine with spindle Lsdpfx Agsuudhfj Rjhp

Condition: used, Saimp KS Iron Lathe. Ljdpev Sth Hsfx Ag Rohp Max piece length 1000mm

Condition: new, Machine in stock and immediately available Double Mitre Metal Band Saw S 255 DG Cutting capacity round / square 90°: 255 mm / 210 x 210 mm Cutting capacity flat 90°: 310 x 210 mm Cutting capacity round / square 45°, right: 220 mm / 210 x 210 mm Cutting capacity flat 45°, right: 220 x 200 mm Cutting capacity round / square 45°, left: 230 mm / 200 x 200 mm Cutting capacity flat 45°, left: 230 x 200 mm Cutting capacity round / square 60°, right: 135 mm / 135 x 135 mm Cutting capacity flat 60°, right: 135 x 135 mm Saw blade dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor output S6 40%: 2.2 kW Working height: 930 mm Features: - Double mitre saw with swivelling saw bow from left -45° to right +60° - Ideal for machining pipes, profiles, and solid materials made of stainless steel, iron, etc. in commercial applications - Generously sized, cast saw arm for low-vibration operation - Two band speeds for optimal adaptation to the workpiece Lodped R Sipjfx Ag Rshp - Hydraulic lowering cylinder - Quick-release vice for fast, easy clamping of workpieces - Precise, adjustable saw blade guide for optimal cutting results - CE/IEC certified, German documentation and German service Scope of delivery: - Saw blade - Material stop - Pressure gauge (band tension) - Carbide saw blade guides - Quick-release vice - Integrated coolant system - Hydraulic bow lowering - Motor protection switch - Automatic end stop - Base frame

Condition: new, "Shaft diameter: 50 mm Piston force: 10 tons Hydraulic motor: 1,5 KW Machine operating position: Horizontal/vertical Control: Programmable digital display Dimensions (w x h x l): 650 x 1270 x 1100 mm Weight: 430 kg Capacity: Steel pipe : 80 x 2 mm Square tube : 60 x 60 x 3 mm Round bar : 40 mm Flat bar : 60 x 60 x 6 mm Angle iron : 80 x 80 x 12 mm Scope of delivery: CE60H3 Lsdpfsuudgbox Ag Rshp Standard roll set Equipment (Control panel, service manual, etc.)"

Condition: new, Year of construction: 2025, Fully automatic cutting of medium-large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. For every piece of aluminium you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new aluminium stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic optimiser mode with timber laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales Model: A550 Length: 9 m Linear Unit: ProfiStop Alpha Material Length: 8580 mm Lodpjf Eknnjfx Ag Rohp Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 25 - 90 m/min total power requirement 1,1 / 1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m ATTENTION SPECIAL PRICE!!! (20347) Double miter metal band saw with: - Belt speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table for quick miter adjustment - Quick-action clamping stick can be moved Lhjdpefgyh Rsfx Ag Rsp - Quick release lever - Automatic cooling

Condition: used, machine/vehicle number: 7979, Table Ø: 400 mm Lhsdpfsb Ez R Uox Ag Rop Table with 8 T-slots: 12 mm Overall height: 175 mm Space requirement: 600 x 450 x 175 mm Weight: approx. 100 kg