Used other injection molding machinery for sale (121)

Condition: ready for operation (used), Year of construction: 1993, Some older plastic injection molding machines from Arburg, Demag and Stübbe are available. 1) Stübbe S110/345, year of manufacture: 1976, clamping force: 1000kN, shot weight: 140g, mold installation height min./max.: 180mm/480mm, opening stroke: 320mm, tie bar spacing: 360mm/355mm, screw diameter: 40mm, core pulls: 1. 2) Demag D 150-452 NC III, year of manufacture: 1990, clamping force: 1500kN, shot weight: 207g, mold installation height min./max.: 320mm/550mm, opening stroke: 430mm, tie bar spacing: 460mm/460mm, screw diameter: 45mm, core pulls: 1. 3) Demag D 100-275 NC II P, year of manufacture: 1989, clamping force: 1000kN, shot weight: 130g, mold installation height min./max.: 200mm/400mm, opening stroke: 350mm, tie bar spacing: 400mm/400mm, screw diameter: 38mm, core pulls: 1. 4) Arburg Allrounder 270M 250-75, year of manufacture: 1990, clamping force: 250kN, shot weight: 25g, mold installation height min./max.: 225mm/not specified, opening stroke: 325mm, tie bar spacing: 270mm/270mm, screw diameter: 20mm, core pulls: 1. 5) Arburg 320 850-210, year of manufacture: 1986, clamping force: 850kN, shot weight: 108g, mold installation height min./max.: 250mm/625mm, opening stroke: 375mm, tie bar spacing: 320mm/320mm, screw diameter: 35mm, core pulls: 0. On-site inspection is possible. Individual sale possible. Hedpjx Hz Sbofx Adash

Year of construction: 2018, condition: ready for operation (used), A compact Arburg injection molding machine is available. Clamping force: 180kN, daylight: 221mm/221mm, platen dimensions X/Y: 400mm/400mm, max. opening stroke: 275mm, min. mold installation height: 150mm, max. platen distance: 425mm, ejector force: 18kN, ejector stroke: 95mm, screw diameter: 15mm, weight: approx. 1900kg, operating hours: approx. 23300h. Documentation available. An on-site inspection is possible. Hjdpfxex E Ac Ee Adajh

Year of construction: 2024, condition: ready for operation (used), An Arburg injection molding machine is available. Clamping force: 400kN, max. opening force: 130kN, max. opening stroke: 350mm, min. mold height: 200mm, max. platen distance: 550mm, tie bar distance: 270mm/270mm, max. moving mold half: 180kg, ejector stroke: 125mm, ejector force: 30kN, injection unit: Euromap 70, screw diameter: 18mm, injection pressure: 2500bar, weight: approx. 2200kg, operating hours: approx. 4100h. Documentation available. An on site inspection is possible. Hodpfxox E Acrs Adash

Year of construction: 2020, condition: ready for operation (used), Clamping force: 400kN, max. opening force: 130kN, max. opening stroke: 350mm, min. mold height: 200mm, max. platen distance: 550mm, tie bar distance: 270mm/270mm, max. moving mold half: 180kg, ejector stroke: 125mm, ejector force: 30kN, injection unit: Euromap 70, screw diameter: 22mm, injection pressure: 2500bar, weight: approx. 2200kg, operating hours: approx. 12400h. Documentation available. An on site inspection is possible. Hedpfex E Acxsx Adash

Year of construction: 2009, condition: ready for operation (used), Screw diameter: 40mm, screw stroke: 160mm, displacement volume: 201cm³, shot weight: 184g, injection pressure: 2000bar, shot volume: 168cm³, clamping force: 1500kN, opening force: 350kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, tie bar distance: 470mm/470mm, platen dimensions X/Y: 650mm/650mm, weight: approx. 5000kg, operating hours: approx. 60000h. Documentation available. An on site inspection is possible. Hsdpfx Ajx E Ac Sedajh

Year of construction: 2019, condition: used, overall weight: 960 kg, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Hsdpfx Aoxv D Tdsdaeh

Year of construction: 2020, condition: ready for operation (used), Offered is a Boy 100E 2K injection molding machine (year 2020, approx. 15160h) including Boy 2C XS unit, Boy LR5 handling (year 2020) as well as Dorner GAL-60 conveyor. 1000kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw (main unit) + 22mm screw (2K), fully enclosed, hydraulic ejector 42.7kN, OPC-UA & network interfaces, EUROMAP-67 robot interface, robot stroke X/Y/Z: 300mm/800mm/1500mm, conveyor 400mm width, 2m length. Viewing is possible upon arrangement. Hjdpoxyk Snjfx Adajh

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 291257-100, MACHINE DETAILS Net weight: 23,500 kg / 8,500 kg Hodpfx Asxyizhsdaoh Hydraulics – Operating pressure: 231 bar Electrical data Motor rated current: 109 A Control voltage: 230 V Frequency: 50 Hz

Year of construction: 1999, condition: ready for operation (used), A two-component injection molding machine Krauss Maffei Multinject is available. Clamping force: 3500kN, platen dimensions X/Y: 1280mm/1190mm, second unit: 390CZ. Machine dimensions X/Y/Z: approx. 6300mm/2000mm/3100mm, weight: approx. 17000kg, control: Krauss Maffei MC4, operating hours: 78424h. The control is defective. Documentation vorhanden. An on-site inspection is possible. Hsdpfx Adsxx Uf Ajash

Year of construction: 2016, condition: ready for operation (used), Offered is a Boy 80E 2K injection molding machine (year 2016, approx. 29398 operating hours) including 2C XS aggregate, Wittmann Primus 16 handling (year 2022), Dorner GAL-60 conveyor. 800kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw, completely enclosed, hydraulic ejector 42.7kN, EUROMAP 67 interface, robot stroke X/Y/Z: 2000mm/1200mm/620mm, conveyor 400mm width, 2m length. Viewing is possible by arrangement. Hodexx Ufvopfx Adash

Year of construction: 2001, condition: ready for operation (used), Offered are 2 identical horizontally operating hydraulic injection molding machines from ARBURG. Clamping force: 700kN, opening stroke: 250mm, mold installation height: 200-430mm, mold mounting plates X/Y: 476mm/476mm, movable mold half maximum weight: 250kg, screw diameter: 20/25/30mm, injection pressure: 2250/2240/1550bar, horizontal injection position: max. 120mm, weight: 2090kg, machine dimensions X/Y/Z: approx. 3500mm/1900mm/1950mm. Documentation vorhanden, viewing possible by arrangement. Hedpfxoxx Ufij Adaoh

Condition: ready for operation (used), A total of three Ferromatik injection molding machines are available. 1) Ferromatik K155, clamping force: 1550kN, max. platen distance: approx. 950mm, min. mold height: 300mm, max. opening stroke: 650mm, tie bar distance: 500mm/500mm, platen dimensions X/Y: 750mm/750mm, weight: approx. 8000kg. The machine has a leakage in the area of the hydraulic cylinders for the aggregate movement. 2) Ferromatik K200, clamping force: 2000kN, platen dimensions X/Y: 830mm/830mm, tie bar distance: 560mm/560mm, opening stroke: 650mm, daylight: 1000mm, min. mold height: 350mm. Machine dimensions X/Y/Z: approx. 7300mm/1800mm/2300mm, weight: approx. 10000kg. 3) Ferromatik K275, clamping force: 2750kN, min. mold height: 350mm, tie bar distance: 630mm/630mm. Machine dimensions X/Y: 8000mm/2300mm, weight: 13600kg. The machines are sold without handling. Documentation vorhanden. An on-site inspection is possible. Hsdpfxexxa S Io Adaoh

Year of construction: 2004, condition: good (used), Laservall KUBO100 Tempering Unit (2004) Hsdpeu Aqr Isfx Adajh

Year of construction: 2015, condition: ready for operation (used), Two complete injection molding facilities with two Husky injection molding machines, five complete tools with metal separator, gravimetric Motan mixing system and crane system are available. 1) 2x Husky H-PET230 AE RS95, year of construction: 2015, max. shot weight: 2424g, max. PET throughput: approx. 390kg/h. 2) 48-cavity H-PET mold, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, bottom thickness: 2.30mm, cavities: 48, cycle time: 12.1s-12.7s. 3) 48-cavity H-PET mold, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, bottom thickness: 2.3mm, cavities: 48, cycle time: 14.4s-15s. 4) 32-cavity H-PET mold, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, bottom thickness: 2.2mm, cavities: 32, cycle time: 11s-11.7s. 5) 32-cavity H-PET mold, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, bottom thickness: 2.42mm, cavities: 32, cycle time: 13.4s-14s. 6) 48-cavity H-PET-AE mold. Total system dimensions X/Y/Z: approx. 24m/13m/5.5m. Including drying unit, mold dehumidification, color mixing devices and T-conveyor. Documentation available. An on-site inspection is possible. Hsdpjw Az Riefx Adash

Year of construction: 2005, condition: ready for operation (used), There are two BOY 55M available, both year of construction 2005. Clamping force: 550kN, screw diameter: 38mm, stroke volume: 196cm³, injection pressure: 2000bar, platen dimensions: 565mm/540mm, tie bar distance: 360mm/335mm. Workpiece height min./max.: 250mm/650mm, opening stroke: 400mm, max. platen distance: 1050mm, ejector stroke: 80mm, max. mold weight: 600kg. Dimensions X/Y/Z: approx. 3300mm/1200mm/2100mm, weight: approx. 2300kg, operating hours: 29664h, control: Procan MD. Robot interface Euromap 12 included. Hjdpfx Astyaypodaeh

Year of construction: 1999, condition: ready for operation (used), An old Arburg injection molding machine and five HB-Therm temperature control units are available. 1) Injection molding machine Arburg Allrounder 270S 250-70, clamping force: 250kN, tie bar distance: 270mm/270mm, platen dimensions X/Y: 380mm/380mm, mold height range: 200mm/550mm. 2) Temperature control unit HB-Therm HB-W 140, year of manufacture: 1999, max. temperature: 140°C, flow rate: 40l/min, max. operating pressure: 12bar, machine dimensions X/Y/Z: approx. 650mm/300mm/1000mm, weight: approx. 75kg. An on-site inspection is possible. Hjdpfx Asxvdfaodaoh

Condition: as good as new (ex-display), Year of construction: 2010, Independent 2nd injection unit DEMAG Multi-plug 80 L for mounting from the side of IMM. Lab machine " like new " Hjdpfx Adeiwx T Ejash

Year of construction: 2016, condition: ready for operation (used), An Arburg injection molding machine with integrated rotary table is available. Connected load: 61kW, clamping force: 500kN, opening force: 40kN, opening stroke: 250mm, max. mold installation height: 270mm, platen distance: 520mm, rotary table diameter: 900mm, rotation angle: 180°, max. table load: 240kg, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 3250mm/2000mm/2600mm, weight: approx. 3200kg, operating hours: 6244h. Documentation available. An on-site inspection is possible. Hjdpfx Asxrf Nljdajh

Year of construction: 2003, condition: ready for operation (used), Eight Arburg injection molding machines, one Engel injection molding machine, and one Demag injection molding machine are available. 1) Arburg 270M 350-90, year of manufacture: 1996, operating hours: approx. 110000h. 2) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 108000h. 3) Arburg 270M 350-90, year of manufacture: 1992, operating hours: approx. 178000h. 4) Arburg 420C 1000-250, year of manufacture: 1995, operating hours: approx. 96000h. 5) Arburg 370C 800-225, year of manufacture: 1992, operating hours: approx. 156000h. 6) Arburg 320M 500-90, year of manufacture: 1991, operating hours: approx. 94000h. 7) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 83000h. 8) Arburg 630S 2500-675, year of manufacture: 2003, operating hours: approx. 93000h. 9) Demag Viva 100-400, year of manufacture: 1999, operating hours: approx. 116000h. 10) Engel ES 500/100 HLS, year of manufacture: 1998, operating hours: approx. 103000h. On-site inspection possible. Sale of individual machines possible. Hjdpfxexrf Nro Adajh

Year of construction: 2008, condition: used, overall weight: 75 kg, terms of delivery: FCA Pegnitz Hjdewyfm Njpfx Adaoh delivery time: on request terms of payment: 100% prior to delivery

Year of construction: 2008, condition: used, overall weight: 30 kg, terms of delivery: FCA Pegnitz delivery time: on request Hodpfxswyfm Ae Adajh terms of payment: 100% prior to delivery

Year of construction: 2003, condition: ready for operation (used), A total of seven injection molding machines Arburg are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, plate distance: 750mm, plate dimensions X/Y: 570mm/570mm, tie bar distance: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, plate distance: 350mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, injection volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, injection volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Hodpotyyn Hjfx Adaeh

Year of construction: 1995, condition: ready for operation (used), Clamping force: 500kN, tie bar distance: 270mm/270mm, opening stroke: 325mm, min. mold installation height: 225mm, max. platen opening: 550mm, clamping platen dimensions X/Y: 500mm/500mm, machine dimensions X/Y/Z: approx. 3700mm/1400mm/1900mm, weight: approx. 1750kg. An on-site inspection is possible. Hedpfsxltvmox Adash

Condition: excellent (used), Moretto server + 4 filters (2014) Hsdeikni Ijpfx Adaoh

Condition: good (used), For sale - injection molding machine, aggregate, machine for the production of EPS polystyrene shapes - thermoboxes, fishboxes - used, very good condition. The machine is currently still connected to the installation, which will make it easier for the buyer to dismantle and mark individual connections - Complete machine, ready to be connected to a steam installation, transport of EPS granulate, electricity, compressed air, cooling system. - Year of production 2023 - configurable mold for the production of polystyrene thermoboxes, fishboxes, 3 sizes, with or without holes, with a lid - a total of 6 configurations - complete boxes with lids are produced in one cycle - no need to change molds. - the set includes the rights to the design of boxes, fishboxes - documentation, ATTENTION! the machine can produce EPS building shapes for walls, ceilings !! - examples in one of the photos. We have other elements of the production line, check our ads. Hsdpfx Adeua Dqioash We also have other elements/devices for sale, such as: - injection molding machine, aggregate, machine for the production of EPS polystyrene foundation plates + plate mold - Certus container steam boiler room (oil steam generator) - EPS foamer - steam installation: boiler room - machines - 3m3 steam tank - installation for transporting foamed EPS - EPS silos - polystyrene crusher - many spare parts Possibility to send more photos and information by email. Possibility to sell individual components of the set separately.