Used planing & moulding machines for sale (494)

Year of construction: 1971, condition: used, Shaft system 1 bottom - 4kW, 2850 rpm 2 right lateral - 3 kW, 2850 rpm 3 lateral left - 3 kW, 2850 rpm 4 right side 3 kW, 2850 rpm 5 top 5.5 kW, 2850 rpm 6 bottom - 4kW, 2850 rpm Dimensions 4900 mm x 1300 mm x H 1500mm Hedpfjigqzrox Ahvjfd Weight approx 5500 kg

Condition: new, Year of construction: 2021, Max. working width 260 mm Min. working width 25 mm Max. working height 180 mm Min. working height 8 mm Feed speed 4/30 m/min Spindle speed 6000 rpm Tool holder spindle diameter ø 40 mm Tool diameter 1st lower spindle ø 125 mm Hodpsv Dtwfefx Ahvofd Min. tool diameter 4th spindle ø 110 – 125 – 140 mm Max. tool diameter 4th spindle ø 200 m Min./Max. tool diameters (except 1st and 4th spindle) ø 110 / 200 mm Diameter and thickness of the undercutter ø 145 – 12 mm Length of the worktable 2500 mm Axial adjustment of the vertical spindles under the worktable - 90 mm Power of the lower planer spindle motor 4 kW Power of the right spindle motor 4 kW Power of the left spindle motor 4 kW Power of the upper spindle motor 5.5 kW Power of the second, lower spindle motor 4 kW Power of the feed motor 2.2 kW Feed up/down 0.37 kW Worktable made of HARDOX steel standard Pneumatic pressure of the drive units standard Poly - V belts drive all spindles, withstand the highest efficiency of the power of the motors standard Independent motor unit for each spindle standard Drive system powered by the Cardan system standard Chip removal system standard Manual lubrication of the work table standard Direct start of the motor with illuminated buttons from the control panel standard Overall dimensions (length x width x height) 4300 X 1600 X 1700 mm Weight 2000 kg

Condition: used, Year of construction: 2006, 9 spindles plus 1x saw unit Hfedpfoyh T R Iox Ahvjd Working width: 38 - 300 mm Working height: 40 - 110 mm Technical data in the attached document Available from October 2026

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, working width 300mm working height 140mm feeding rate 200m/min spindles speed 6000 RPM spindles diameter 50mm spindles set: 1. bottom - 22kW 2. top - 22kW Hfedpjvu Sayofx Ahvsd 3. right - 18,5kW 4. left - 18,5kW 5. right - 18,5kW 6. left - 22kW 7. top - 22kW 8. bottom - 22kW 9. top - 22kW 10. bottom - 22kW 11. bottom - 22kW Without feeder: 125 000€

Condition: ready for operation (used), Working width: 220 mm Working height: 120 mm 5 spindles Spindle arrangement: bottom / right / left / top / right Motors: 5.5 kW, 7.5 kW, 5.5 kW, 5.5 kW Table lubrication Feed speed: 6/22 m/min Year of manufacture: 1990 Hfedpov Dh Sdjfx Ahvod Machine length: 4400 mm Width: 1700 mm Height: 1250 mm

Condition: used, Number of boring spindles 4 St. Working width 230 mm Working height 120 mm Feed motor 5,5 kW Hfjdsw I Dcdjpfx Ahved

Condition: excellent (used), functionality: fully functional, Four-sided planer Leadermac Smartmac 423 Working width: 15–230 mm Working height: 10–150 mm Hfodjydk I Eepfx Ahvod Number of spindles: 4 Spindle configuration: Bottom 5.5 kW Left Right 7.5 kW Top 7.5 kW First feed roller on the table is grooved for wet timber Feed speed adjustable via variator: 6–24 m/min Electric height and width positioning Spindles adjustable on two axes

Condition: like new (used), Year of construction: 2005, functionality: fully functional, working width: 230 mm, planing height: 120 mm, planer shaft diameter: 40 mm, workpiece height (max.): 120 mm, Weinig Unimat 300 — 4-sided planer 230 x 120 mm Although from 2005, this machine is practically like new! Rarely have we seen one so little used. Hsdpfx Asydk Thohvsfd Looking for an almost-new 4-spindle planer but don’t have the budget for a new one? This Unimat 300 is the perfect pick!

Condition: excellent (used), functionality: fully functional, shaft diameter: 40 mm, Equipment: cabin, Four-sided planer BMH Coroprofil 32 320x160mm Working width: 320 mm Hodpfx Ahoyc Tzrsvofd Working height: 160 mm Number of spindles: 6 Spindle configuration: Bottom: 9.2 kW Right: 7.5 kW Left: 7.5 kW Top: 11 kW Right: 7.5 kW Left: 7.5 kW Spindle diameter: 40 mm Side spindles adjustable in two planes Electronic machine positioning Feed speed: 4–24 m/min

Condition: excellent (used), Weinig Profimat 23 four-sided planer Working width 230mm Working height 120mm Number of spindles 5 Spindle arrangement: Bottom 4kw Right Hodpfx Ahevyr Hkevefd Left 11kw Top 11kw Bottom 11kw Pneumatic material clamps Adjustable feed speed 5-22m/min Entry table length 2470mm Feed motor with a power of 4kw CE certificate Diameter of exhausts 5x140mm Machine dimensions 400x150x165cmH Weight 2300kg

Condition: ready for operation (used), functionality: fully functional, overall weight: 90 kg, HEMAG 6-roll feed Specifications: - condition - used - manufacturer - HEMAG - 6 pulling rollers - forward/reverse rotation - speed control on gears, switch and additional transmission - three-phase motor - 8 working speeds from 4.0 to 30 m/min - weight - about 90 kg Additional information: - the machine is in excellent technical condition, ready for immediate use Hfjdjtzyzzepfx Ahvod - presented photos illustrate the actual state of the object of sale - possibility to turn on and check the device on site. - the price listed in the auction does not include VAT.

Condition: good (used), Year of construction: 2002, Number of boring spindles 4 St. Working width 220 mm Working height 120 mm Hedpfxeu N Iwne Ahvjfd Length of the planing table 2500 mm Feed motor 0,75 kW

Condition: excellent (used), Year of construction: 2018, Weinig Powermat 700 Year of manufacture: 2018 Planing width: 230 mm Planing height: 160 mm Hfsdpfxjyg Hflo Ahvjd Infeed table: 2,500 mm Feed speed: 40 m/min Feed motor: 7 kW Table treatment: Marathon coating (hardened, excluding infeed table and special plates) Driven roller in table with width 200 mm Memory Plus system for 500 profiles Spindle arrangement Bottom: 11 kW Right: 7.5 kW Left: 7.5 kW Top: 11 kW Top: 11 kW Bottom: 11 kW Machine is in very good condition

Condition: excellent (used), Compact High Speed Planing Line Mechanisation with Stacker 1. Weinig EM814 moulder infeed with flat chain feeder 2. Weinig 820 high speed right angle moulder outfeed with cross feed sweepers 3. Weinig 811 board stacker with scissors lift (chain feed discharge options) -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high) Hfodpfxsxb U Txo Ahvjd 3. Weinig cross chains after scissors lift to move full packs away from the stacker when full. Possible to supply with Weinig Hydromat moulders 100m/min as needed.

Condition: good (used), Year of construction: 2000, Weinig A5 outfeed with automatic board stacker. -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor Hfedpfxexftvae Ahvod -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high)

Condition: like new (used), functionality: fully functional, Hydraulic feed to the Weinig Hydromat. Hfsdpfxsv Er Ufs Ahvod Feed speed 8-60m/min

Condition: excellent (used), - Number of spindles: 4. - Planing width: max 120 mm. - Planing height: max 100 mm. Hfedpfxjygy Tps Ahvsd - Motor power: typically 4 x 3 kW. - 4 feed speeds - Spindle diameter: 30 mm.

Condition: good (used), Year of construction: 1999, Technical data : Max working width : 170 x 120 mm Hfjdjygydzspfx Ahved Number of spindels : 7 Pc. Spindle configuration : Bottum/right/left/top/top/bottum/universal Spindle diameter : 40 mm Infeed table : 1600 mm Infeed type : Kardan Infeed speed : 5 - 30 mtr/min Tools on 4 spindles ( TERSA) Noise cabin CE Marked

Condition: used, Number of boring spindles 6 St. Working width 230 mm Working height 120 mm Hjdpfx Aheya Hh Tevofd

Condition: excellent (used), Weinig Profimat 26 Super four-sided planer Working width 230mm Working height 130mm Number of spindles 5 Arrangement of spindles Bottom 4kw Left Hjdpfx Asu Hgd Iohvefd Right 7.5kw Top 5.5kw Bottom 4kw Pneumatic presses divided into 3 sections Feed speed adjustable by variator 5-24m/min CE certificate Technical documentation

Year of construction: 1989, condition: excellent (used), 8 heads The last universal head. Max planing height 130mm Hedpfjmi A Dzox Ahvefd Max planing width 240mm Driven rollers in the table - for wet wood Repeatable heads, two on each side Smooth adjustment of the feed speed Cardan feed

Condition: not inspected (used), Year of construction: 2002, Chambon (BMH) Profilmax moulder Description Infeed table 2000mm Spindle sequense bottom-right-left-top Motorpower 4/4/4/5,5 kW Power (total) 26kW Planing width: 230mm Planing height: 120mm Spindle diameter 40mm 2000 kg Dimensions 3250 x 1600 x 1600mm CE Hfsdpoq Iir Nsfx Ahvsd (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: not inspected (used), Year of construction: 1995, SCM Compact 23 Moulder Description Spindle sequence bottom-right-left-top Infeed table length 2000mm Max. Working width 230mm Max. Working height 120mm Feed speed 6-12 mtr / min Hfsdpoq Iipxefx Ahved Spindle speed 6,000 rpm 400Volt 50Hz CE (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: not inspected (used), Year of construction: 1997, SCM Compact 23 Moulder Hjdpewc A R Dofx Ahvofd Description Spindle sequence bottom-right-left-top Infeed table length 2500mm Max. Working width 230mm Max. Working height 120mm Feed speed 6-12 mtr / min Spindle speed 6,000 rpm 400Volt 50Hz CE (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2005, Weinig Unimat 500 Moulding machine Description; Dimensions of the infeed table: 2500 mm Number of axes: 5 Spindle Sequence: Bottom-right-left-top-bottom Mobile spindle: No Planing width: 20 / 230 mm Planing height: 12 / 120 mm Throughput: 24m/min Groove bed: No Other comments:- (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland Hjdpow Ebacefx Ahvsfd