Used planing & moulding machines for sale (513)

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 2205027, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, input current: 72 A, Four-sided planer Leadermac Smartmac LMC-423S with 4 spindles, manufactured in 2022. Equipped with an extended infeed table of 2.5 m (instead of 2 m) and a Schneider Easyset touchscreen control. Chodoz Ngimjpfx Agrsd

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, working width 300mm working height 140mm feeding rate 200m/min spindles speed 6000 RPM spindles diameter 50mm spindles set: 1. bottom - 22kW 2. top - 22kW 3. right - 18,5kW 4. left - 18,5kW 5. right - 18,5kW 6. left - 22kW 7. top - 22kW 8. bottom - 22kW 9. top - 22kW 10. bottom - 22kW 11. bottom - 22kW Chsdsz Af Rwopfx Agrsd Possibility to purchase the machine with feeder + EUR 14,900 net.

Condition: as good as new (ex-display), Year of construction: 2024, warranty duration: 12 months,  Control panel  5 cutting heads  The angle of the 5th head can be adjusted within a range of 270 degrees  5 feed and pressure rollers  Adjustable feed speed: 3 – 15 m/min  4 dust extraction points  Height indicator allowing for precise adjustment of the table and machine height  Width indicator allowing for precise adjustment of the timber dimensions  Infeed table with a length of 1.9 m and outfeed table with a length of 1 m Technical data CAPACITY  Four-sided planing • Maximum width 350 mm • Height range 10 - 160 mm  Two-sided planing • Planing width 410 mm • Height range 10 - 230 mm  Single-sided planing • Maximum width 510 mm • Height 230 mm TOP HEAD • Diameter 88 mm • Width 510 mm • Motor power 5.5 kW (7.5 HP) • Rotational speed 6000 rpm • Max. planing depth 8 mm • Max. profiling depth 20 mm BOTTOM HEAD • Diameter 72 mm • Width 410 mm • Motor power 4 kW (5.5 HP) • Rotational speed 6000 rpm • Max. planing depth 8 mm • Max. profiling depth 10 mm (15 mm drill) SIDE HEADS • Spindle diameter 30 mm • Max. Knife height 160 mm • Max. Diameter 160 mm • Motor power 3 kW (4 HP) • Rotational speed 6000 rpm • Max. planing depth 30 mm ADDITIONAL HEAD Csdpfx Agezqzy Rorshd • Spindle diameter 30 mm • Max. Knife height 130 mm • Max. Diameter 200 mm • Motor power 3 kW (4 HP) • Rotational speed 3000, 6000, 9000 rpm • Tilt angle 270 degrees

Condition: excellent (used), Year of construction: 1995, operating hours: 1,234 h, functionality: fully functional, 1 GUBISCH - window production line type CENTROMAT-CD-SUPER (output 3 - 4 parts per minute. Number of units to be produced in 8 hours, approx: 200 pieces) with the following machine components: 2 cross-cut saws > 2 cross-cut saws electronically controlled: yes > Number of tools: 1 piece > Spindle speed: 3000 rpm > Tool diameter max.: 350 mm > Motor power: 3 kW 2 left and 2 right vertical slot spindles > Number of tools: 3 pieces Chodsv A It Sepfx Agred > Spindle stroke: 3x100 mm > Spindle speed: 4200 rpm > Spindle diameter: 50 mm > Tool clamping length: 300 mm > Tool diameter max.: 320 mm > Motor power: 11 kW 3 profiling spindles vertical right > Number of tools: 3 pieces > Vertical spindle stroke: 3x100 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool clamping length: 300 mm > Max. tool diameter: 230 mm > Motor power: 9.2 kW 3 Profiling spindle vertical left > Number of tools: 3 pcs. > Vertical spindle stroke: 3x100 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool clamping length: 300 mm > Max. tool diameter: 230 mm > Motor power: 9.2 kW Other features: > Online capable: yes > Double parts package: yes > Screen control: yes Detailed description on request.

Condition: ready for operation (used), functionality: fully functional, max working width 500mm max working height 200mm height of side heads 10cm changenable side heads Codpozz Nh Dsfx Agrohd 2-knives shafts roll in the table manual adjustment of side heads two feed speed additional spindles in the outfeed

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 2201010, Four-sided planer Leadermac Compact LMC-530C with 5 spindles, year of manufacture 2022. Working width 15 - 300 mm, working thickness 10 - 150 mm, minimum piece length 800 mm (300 mm with sequential feed), infeed table 2500 mm. Spindles: 15 HP, 10 HP, 10 HP, 20 HP and 20 HP, diameter 50 mm, 6,000 rpm. Feed motor 7.5 HP, 6 - 24 m/min. Schneider 5.7-inch touchscreen EASYSET with NC control of axis 3 (left radial), axis 4 (top radial) and height adjustment of the pressure bar. Pneumatic left side pressure roller, two-part pressure shoe, extra table and anti-kickback device for multiple sawing. Cjdpfx Agez Ngiysrshd

Condition: good (used), Year of construction: 1993, functionality: fully functional, working width: 230 mm, planing height: 170 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 170 mm, power of feed motor: 7,500 W, height adjustment type: electric, planer shaft diameter: 50 mm, number of spindles: 8, input frequency: 50 Hz, Equipment: cabin, motor brake, 8 spindles, Chedpfjr Axwnsx Agrsd Working width: 230 mm, working height: 180 mm, spindle diameter: 50 mm, feed rate: 7.5 kW / 6 - 36 m/min, Spindle arrangement: 1-bottom (7.5 kW) - scoring spindle 2-bottom (7.5 kW) 3-Right (11 kW) 4-Left ( 11 kW) 5-Top (11.0 kW) 6-Bottom (22.0 kW) 7-Bottom (7.5 kW) 8-Top (7.5 kW) 8 driven rollers in the table

Condition: excellent (used), CATALOGUE NUMBER 6674 TECHNICAL DATA - Max. planing width: 150mm - Max. planing height: 130mm 7 spindles: 1) Horizontal, lower: 150mm, 3kW 2) Vertical, right: 130mm, 3kW Codpfx Age Af Utlerohd 3) Vertical, left: 130mm, 4kW 4) Horizontal, upper: 150mm, 4kW 5) Horizontal, lower: 150mm, 3kW 6) Vertical, right: 130mm, 4kW - Diameter of all spindles: 35mm - All spindles are adjustable up/down and right/left - 4 toothed feed rollers from above - 4 rubber feed rollers from above - 2 pressure rollers from above - Electric thickness adjustment: 0.25kW - Length of infeed table: 1970mm - Central lubrication of the table - Infinitely variable feed speed adjustment - Feed motor: 1.5kW - Diameter of dust extraction nozzles: 6x120mm - Dimensions (L/W/H): 4000x1300x1600mm - Weight: approximately 3000kg – Made in Germany – With 6 heads – Used planer, very good condition Net price: 36900 PLN Net price: 8581 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2003, functionality: fully functional, working width: 230 mm, planing height: 120 mm, planing width: 230 mm, overall weight: 3,000 kg, number of spindles: 5, Planing and Moulding Machine / Four-Sided Planer Manufacturer: SCM Model: Superset XL Year of manufacture: 2003 Planing machine with 5 spindles (bottom-right-left-top-universal), previously used in a parquet production facility. Working width: 230 mm Working height: 120 mm Feed speed steplessly adjustable, approx. 5 - 25 m/min. Spindle arrangement: Bottom Right Left Top Universal spindle Codez N Amzepfx Agrehd Weight approx. 3000 kg

Condition: ready for operation (used), Year of construction: 2011, Number of spindles 6 St. Working width 230 mm Working height 150 mm Length of the planing table 2000 mm Feed motor 5,5 kW Feed speed 7-36 m/min. Kuper SWT 23 XL-6 Four-Sided Planer ----- Machine fully functional tested! ... Working width min/max: 18 - 230 mm Working height min/max: 8 - 150 mm Spindle configuration: 1st Spindle - bottom ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Pulley diameter: 160 mm Adjustment: axial and radial, manual 2nd Spindle - right ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 160 mm Pulley diameter: min. 110 mm - max. 200 mm Adjustment: axial and radial, manual, via mechanical digital display Adjustment: vertical 35 mm below Table 3rd Spindle - Left ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 160 mm Cutting circle diameter (125 mm): min. 110 mm - max. 200 mm Adjustment: axial and radial manual via mechanical digital display Adjustment: horizontal 18 mm to 230 mm at 125 mm diameter, vertical 35 mm below table 4th Spindle - Top ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter (125 mm): min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric via mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 5. Spindle - top ----- Power: 7.5 kW Chjdpjyyqnlsfx Agrod Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric according to mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 6. Spindle - bottom ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 110 mm - max. 250 mm Adjustment: vertical manual according to mechanical digital display, axial manual Adjustment: Radial 8 to 150 mm with a 125 mm diameter Axially 35 mm Further features: ----- -Infinitely variable feed speed, 7-36 m/min, 5.5 kW motor -Electric height adjustment, 0.75 kW -Siemens touchscreen - Includes existing planer heads (Technical specifications provided by the manufacturer - no guarantee!)

Condition: excellent (used), CATALOGUE NUMBER 7133 TECHNICAL DATA - max. width of workpiece: 220mm - max. height of workpiece: 120mm – 5 spindles: 1) horizontal lower 220mm, 5.5kW 2) vertical right 120mm 3) vertical left 120mm; 2 and 3, 11kW Cjdpfx Ao Af Uy Sjgrohd 4) horizontal upper 220mm, 11kW 5) horizontal lower 220mm, 5.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - pneumatic pressure pads - from above: 4 infeed rollers, toothed, including 2 double rollers - from above: 1 double outfeed roller, smooth, rubber - from below: outfeed roller, rubber - feed on Cardan shafts - feed speed adjustment - feed motor 2.2kW - lifting motor 0.25kW - electric adjustment of planing thickness - length of infeed table 1970mm - central lubrication - diameter of dust extraction nozzle 4x120mm, 140mm - dimensions (L/W/H) 3500x1550x1400mm - weight 1750kg ADVANTAGES – with 5 heads – German-made – unpainted – used planer, very good condition Net price: 39900 PLN Net price: 9280 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), functionality: fully functional, Working width: 220 mm Working height: 120 mm Number of spindles: 5 Spindle arrangement: bottom / right / left / top / bottom Motors: 7.5 KW, 11 KW, 11 KW, 11 KW, 7.5 KW Table lubrication Feed drive: 2.2 KW Electrically adjustable pressure beam Electrically adjustable left spindle Codpfjz S Uf Ijx Agrehd Feed speed: 6/22 m/min Year of production: 1993 Machine dimensions: - Length: 4400 mm - Width: 1700 mm - Height: 1250 mm

Condition: ready for operation (used), working width 260mm working height 150mm toothed roller in the feed table before the first head 5 heads head arrangement: lower/right/left/top/bottom electric setting of planing dimensions Csdezxyddepfx Agrohd stepless feed adjustable up to 24m/min pneumatic clamps of the pulling rollers head adjustment in two axes engines: 1. 11kW 2. 11kW 3. 12kW 4. 11kW 5. 7.5kW pulling roller drive via cardan shafts feeding table length 2m chrome plated table additional pulling roller at the right head, so-called tandem horizontal pneumatic clamps set of heads included with the machine

Condition: used, Year of construction: 2007, functionality: fully functional, working width: 150 mm, planing height: 50 mm, spindle diameter: 40 mm, planing width: 150 mm, working height: 50 mm, - after technical inspection - German manufacture Chsdjw E I Ruepfx Agred - year of manufacture: 2007 - equipped with Weinig EM 15 belt feeder TECHNICAL PARAMETERS: - planing width: 150 mm - planing height: 50 mm - spindle diameter: 40 mm - first bottom head: 11 kW at 6000 rpm - second top head: 22 kW at 7000 rpm - third bottom head: 5.5 kW at 6000 rpm - feed motor: 2.2 kW - feed speed adjustable via inverter - feed via cardan shafts - four upper steel feed rollers - one upper rubber outfeed roller - grooved table surface - infeed table length: 1000 mm - automatic central lubrication - feeding table length: 4700 mm - feed speed adjustable via inverter - hydraulic pressure rollers - total feeder power: 2.25 kW - machine dimensions (L/W/H): 790 x 200 x 190 cm - weight: 3200 kg

Condition: excellent (used), Catalog number 7640 Codjzx Suuepfx Agrjhd ADVANTAGES – Best wide-belt sander for both wet and dry wood – Ideal for processing logs, flooring, etc. – 2 sanding drums + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used sander, very good condition TECHNICAL DATA - Max. sanding width 610mm - Max. sanding height 200mm - Top: - Toothed infeed roller - Ratchets - Pressure roller - 2 toothed feed rollers - Pressure roller - 610mm sanding drum, 6-knife, 15kW - Pressure rollers - Smooth outfeed roller - Bottom: - Side pressure roller at the infeed - Guide strip - Infeed table - Toothed feed roller - 610mm sanding drum, 6-knife, 7.5kW - 2 smooth feed rollers - Side pressure roller at the outfeed - Rear: 2 side spindles + pressure rollers: 1) Vertical right 200mm, 15kW 2) Vertical left 200mm, 15kW - Vertical left spindle with electric left/right adjustment - Spindle diameter 40mm - Spindles arranged in an alternating pattern - Spindles adjustable up/down, left/right 3) Additional horizontal lower spindle 160mm, adjustable up/down + left/right, 5.5kW - Spindle diameter 35mm - At the outfeed: 2 upper metal sliding rollers, 2 lower feed rollers, rubber - Adjustable rollers in the lower table - Electric sanding height adjustment - 6 feed speeds: 12.8/16.3/20/25.6/32.6/40 m/min - Feed motor 8kW - Dust extraction port diameters: 2 x 120, 2 x 160mm - Dimensions (L/W/H): 2980x1980x1800mm - Weight approximately 3500kg Net price: 66900 PLN Net price: 15558 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7663 TECHNICAL DATA - max planing width 510mm - max planing height 200mm – from above: - feed rollers - toothed infeed roller - pressure rollers, 2 rows - toothed infeed roller - pressure roller - planing roller 510mm, 4-knife, 7.5kW motor - pressure rollers - smooth outfeed roller - outfeed pressure roller, 2 pcs - smooth feed roller – from below: - pressure roller - adjustable infeed table + slip roller - planing roller 510mm, 4-knife, 5.5kW motor - 2 slip rollers, smooth - side pressure roller – from the rear: - side spindles 1) vertical right 140mm, 4kW 2) vertical left 140mm, 4kW - spindle diameter 40mm - installed 4-knife cutterheads at a height of 120mm - spindles adjustable up/down, left/right - stepless feed speed adjustment - electric table lifting - dust extraction port diameters 3x150mm, 1x110mm - dimensions L/W/H 2300x1700x1700mm - weight 2200kg ADVANTAGES – ideal for processing flooring – electric table lifting Chsdpfxeztpmqs Agrsd – Czech production – used planer, very good condition Net price: 36900 PLN Net price: 8581 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Year of manufacture: 2013 Milling head Working area X: 3000 Chsdjzxyfzopfx Agrjd Working area Y: 900 Working area Z: 50 Separate units: 1 Vertical drill: 12 Horizontal drill X: 4 Horizontal drill Y: 2 Grooving saw: Yes Stationary machine: Yes Clamping system: Clamps Safety feature: Photoelectric cell Controls and software SCM XILOG Minimum dimensions: 3920x1170x2150

Condition: excellent (used), Year of construction: 1990, SCM P64 Four-Sided Planer Infeed table length 2300 mm Planning width 180 mm Planning height 105 mm Feed rate 6 and 12 m/min Spindle diameter 35 mm Axial adjustment of the planing head for profiling 15 mm Motor power, infeed side 4 kW Motor power, thicknessing roller 4 kW Motor power, right and left rollers 5.5 kW Weight 1200 kg Chjdpjz Ii A Eefx Agrsd Dimensions 2820 x 1220 x 1920 mm Condition: Functionality tested.

Condition: used, Weinig Powermat 1200 automatic planing and moulding machine for planing and profiling solid timber in a single operation. This high-performance machine, featuring seven spindles, enables precise machining of all four sides of the workpiece as well as complex profiling at high feed rates. Ideal for demanding applications in the window, door, moulding and structural timber sectors. Codpfx Agsz Ttfporehd Technical data: - Spindle 1: Bottom / 15 kW / 50 mm / 8,000 rpm - Spindle 2: Right / 15 kW / 50 mm / 8,000 rpm - Spindle 3: Left / 15 kW / 50 mm / 8,000 rpm - Spindle 4: Right / 15 kW / PowerLock / 8,000 rpm - Spindle 5: Left / 15 kW / PowerLock / 8,000 rpm - Spindle 6: Top / 18.5 kW / PowerLock / 8,000 rpm - Spindle 7: Bottom / 22 kW / PowerLock / 8,000 rpm - Spindles: 7 - Working width: 230 mm - Working height: 160 mm - Feed rate: 36 m/min - Feed motor: 7 kW - Control system: PowerCom Plus - Table: Marathon Coating - Driven table rollers: 3 - Axial CNC spindles: 4+5 - Radial CNC spindles: 3+4+5+6

Condition: like new (used), working width 630 mm stepless feed adjustment 4-knife cutterhead maximum workpiece height 240 mm Codpfxezxyu Ao Agrjhd electric height adjustment 7.5 kW motor star-delta start 380V power supply

Condition: ready for operation (used), Year of construction: 2015, Weinig Powermat 700 6x 40mm Spindles. CNC on spindles 3, 4 and 5. Width 20-230mm Height 10-160mm Memory system Automatic lubrication system for bedplates. No 1.  11kW - Bottom 7000rpm No 2. 7.5kW - Right 7000rpm No 3. 7.5kW - Left 7000rpm No 4. 15kW - Top 7000rpm No 5 . 11kW - Top 7000rpm Csdpfxoz N Sy Re Agrehd No 6 . 11kW - Bottom 7000rpm Electronically variable feed. 40m/min Short infeed table. Marathon coating for machine bed plates. Manuals & hand tools.

Condition: excellent (used), Four-side planer WEINIG Quattromat 23 Cedey E Nlaopfx Agrjhd Max. planing width: 230 mm Max. planing height: 120 mm 4 heads, heads included Total power: 23 kW Manual vertical adjustment (up/down) Manual adjustment of planing width Branded machine, maintained in very good condition

Condition: good (used), Year of construction: 1977, functionality: fully functional, Weinig Type PFA 250/85 Year of manufacture: 1977 1 U-7.5 kW 2 R-7.5 kW 3 L-11 kW 4 R-5.5 kW 5 O-11 kW 6 O-7.5 kW 7 U-7.5 kW 8 Uni 7.5 kW Table: 2.5 m Csdpfxjz I A N Es Agrjhd Spindles 6 and 7 with jointer Feed: 5.5 kW

Condition: excellent (used), CATALOGUE NUMBER: 6950 Chjdszwwliepfx Agrjd TECHNICAL DATA - Max. width of workpiece: 220mm - Max. height of workpiece: 130mm - 4 spindles: 1) Horizontal lower spindle, 220mm, 5.5kW 2) Vertical right spindle, 130mm 3) Vertical left spindle, 130mm; (2 and 3 spindles) 5.5kW 4) Horizontal upper spindle, 220mm, 5.5kW - 4 spindles with electric up/down adjustment - All spindles adjustable up/down, left/right - Spindle diameter: 40mm - 4 top feeding rollers, toothed, including 1 double roller - 1 top double roller for withdrawal, rubber - 1 bottom roller for withdrawal, rubber - Feed via cardan shafts - Smooth feed rate adjustment: 6-22 m/min - Feed motor: 2.2kW - Lifting motor: 0.55kW - Electric adjustment of planing thickness - Length of infeed table: 1970mm - Central lubrication - Diameter of dust extraction nozzle: 3x120mm, 140mm - Enclosed in a cabinet - Dimensions (L/W/H): 3350x1400x1400mm, weight: 1700kg - Made in Germany - Unpainted - Used planer, very good condition Net price: 29900 PLN Net price: 6953 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (Price may be subject to change in case of significant exchange rate fluctuations)

Condition: good (used), Year of construction: 1989, functionality: unexamined, working width: 220 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 220 mm, working height: 120 mm, overall weight: 7,500 kg, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 10, power: 105 kW (142.76 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Hydromat 22 B With grooved bed 10 spindles, Working width: 220 mm, working height: 120 mm, spindle diameter: 50 mm, Feed rate: 7.5 kW / 8- 40 m/min, Spindle arrangement: 1-bottom (7.5 kW) - with hydraulic clamping 2- Right (7.5 kW) 3-Left (11 kW) 4-Right (7.5 kW)- with straight jointer 5-Left (7.5 kW) 6-Top (15 kW) - with hydraulic clamping 7-Bottom (7.5 kW) - with hydraulic clamping Chedpfx Aeu Udd Ssgred 8-Top (7.5 kW) - with hydraulic clamping and straight jointer 9-bottom (7.5 kW) - with hydraulic clamping and straight jointer 10-Uni (7.5) 6 driven rollers in the table