Four-sided planer and moulder

WEINIG Quattromat 22

Condition: good (used), WEINIG Quattromat four-sided planer max planing width 220mm max planing height 120mm 4 heads, heads included Tsdpsv Hqn Tofx Apded bottom spindle - 4KW, right and left 7.5KW, top - 5.5KW feed on cardan shafts with smooth adjustment electric lifting up and down electric adjustment of planing width branded machine preserved in good condition

Condition: new, Year of construction: 2024, Working width: 600 mm Working height: 5 mm to 300 mm Todoupy Spepfx Apded Minimum workpiece length: 250 mm Units: 2 1. Saw cutting unit Random System: Saw cut appearance 2. Brush: Tynex, diameter 210 mm Height adjustment: electric Height display: digital Feed speed: 4 - 14 m/min Motor power saw unit: 1.1 kW Motor power brush: 4 kW Motor power feed: 0.37 kW Machine length: 1400 mm Machine width: 1500 mm Machine height: 1600 mm Weight: 700 kg

Condition: used, Weinig four-sided planer - max. planing width 23 cm - max. planing height 13 cm - spindle arrangement: lower 4 kW, left and right spindles driven by a single 5.5 kW motor, upper 5.5 kW - 2 steel planing heads 23 cm, + one trimming cutter Tsdpfx Ape Ad Rcredod - automatic adjustment of planing width - feed rollers that can be raised electrically - upper spindle that can be raised electrically - feed with stepless adjustment The machine is in very good condition.

Condition: good (used), - Type: 1300A - Serial number: 951313V - Open top - Dimension: - Total length: 4900 mm Tedeq Ec D Topfx Apdjd - Depth 1100 mm - Height 2300 mm - Washing machine 2100 mm - Inlet 1400 mm - Outlet 1400 mm - Washing height: 1500 mm - 2 pairs of brushes - Connected loads: 380V, 50Hz, 11kW - Price on request

Condition: new, sheet width 1270 mm plate thickness 2,0 mm distance between columns 1300 mm daylight opening 48 mm 135 ° Tsdpfx Aoupxcgjpdod total power requirement Handbetrieben weight of the machine ca. 0,4 t dimensions of the machine ca. 1,6 x 0,9 x 1,2 m Segment-bending machine Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 260mm.

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Tedoh Ek Daspfx Apdsd Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: good (used), Year of construction: 1962, Large band saw with a 1250 mm roll diameter with central cutting device 45 kW motor Roll width 120 mm with electric blade tensioning the upper roll has been removed for transport Todpfx Ajfnh T Ijpded in very good condition, as it has been used little and was overhauled in 1997.

Condition: excellent (used), functionality: fully functional, Vollmer sharpening machine for band saws, in a robust design. Feed from the left to the grinding wheel. Blade width up to 360 mm. 3 switchable tooth profiles. Todpfx Apezmg I Sodod Grinding wheel diameter 250 mm. Infinitely variable feed drive, frequency-controlled. Linear feed system. Stable support and guide blocks, height-adjustable. Machine has been technically inspected and tested.

Condition: not inspected (used), Year of construction: 1995, functionality: fully functional, Lisec sealing robot for second seal type VL-1/25-2, for maximum unit size 3500 x 2500 mm, running direction right to left, consisting of following: RTV-11/25VE, inlet conveyor with width measuring device for glass and frame thickness VL-1/25-2, sealing robot for double glazing units Tedpfx Aporrvkbjded DOS-1TH, 2k metering station for Thiokol The machine will be completed and tested in simulation mode prior delivery

Condition: used, Cross-cut saw motor 1.8 kW Milling motor top 1.8 kW Milling motor bottom 1.8 kW Sliding table with Superfix manual clamp Tjdpfeq Auzaox Apdod Saw blade 2 slitting discs