Used machine and parts cleaning equipment for sale (124)

Condition: new, functionality: fully functional, Basket Washing Machine MRS - WASH 1200 Application: The device is designed for washing components of various sizes and weights. The washer is equipped with a mechanically driven rotary basket powered by a motor and spray nozzles. Operating Description: After switching on the main power, the bath heating process begins. Once the set temperature is reached, the washing cycle can be started. The primary washing phase is the first step, and its duration can be continuously adjusted using the timer located in the control box. When the set time elapses, the bath will end automatically. Kedpfxexnlpds Agtodl STANDARD EQUIPMENT OF THE WASHER: * Safety cover switch that disconnects during opening in the washing process * Liquid level sensor in the tank preventing dry operation * Temperature sensor * Single spray arm * Mechanically rotated basket * Double filtration system * Coarse mesh filter for insoluble contaminants (1mm mesh) * Drain valve Technical Data: Basket diameter: 1200mm Working height: 500mm Basket capacity: 300kg Working time programmability: 0-99 min Washing temperature: 60°C Heater power: 12kW Tank capacity: 400l Spray performance: 200l/min Spray working pressure: 4.5bar Overall width: 1750mm Overall depth: 1750mm Overall height (closed/open): 1250/2400 mm Power supply: 3~400V OUR OFFER INCLUDES OTHER MODELS OF AUTOMATIC BASKET WASHERS FROM THE MRS WASH SERIES WITH SIZES 800, 1000, 1200, 1500, AND EVEN 1500 XL. PLEASE CONTACT US FOR OFFERS ON OTHER MODELS.

Condition: new, functionality: fully functional, warranty duration: 12 months, total width: 1,750 mm, total length: 1,750 mm, total height: 1,700 mm, type of input current: three-phase, The HYDRO WASH 1200 2-in-1 automatic basket washer is a multifunctional device, enabling fully automatic cleaning of parts in a motor-driven rotary basket. For parts with more complex shapes, high-pressure washing at 140 bar is available. Thanks to the combination of these processes, this machine is versatile and can be used in any workshop. It is particularly suited for companies specializing in turbocharger, steering gearbox, and transmission refurbishing, significantly streamlining workflow. To ensure user safety and stable washing parameters, an electronic control panel and a range of integrated sensors are employed. Operating principle: Before the first use, fill the tank with washing fluid. The recommended fluid is a solution of MRS Cleaner Strong concentrate and water in the specified ratio. The Hydro Wash offers both manual and automatic washing modes. a) To activate automatic washing, prepare the device (fill with water and concentrate), close the metal glove cover, close the washer lid by simultaneously pressing two buttons (located at the front and rear of the device), and press the start button. *Basket rotation possible when the lid is open by pressing the right pedal button or simultaneously pressing the two buttons at the front and rear. The condition is that the metal glove cover must be closed.* b) To activate manual washing, close the washer lid by pressing the two buttons (front and rear) simultaneously. Open the metal glove cover and press the left pedal button. STANDARD EQUIPMENT: - Lid interlock sensor for safety when opened during washing - Liquid level sensor to protect against dry operation - Liquid temperature sensor - Adjustable spray arms with nozzles made from stainless steel by Spraying System - Mechanically driven rotary basket - High-pressure pump (140 bar) - Compressed air gun - Pressure regulator with water separator - Coarse mesh filter for insoluble contaminants (0.8 mm mesh size) - Fine filter for contaminants - Adjustable feet - Drain valve - Pneumatic cylinders Technical Data: - Basket diameter: 1200mm - Working height: 500mm - Basket load capacity: 300kg - Programmable cycle time: 0–99 min - Washing temperature: 60℃ - Heater power: 12kW - Tank capacity: 400l - Spray rate: 200l/min Ksdpjxm Ulljfx Agtjdl - Working spray pressure: 4.5–6 bar - Manual washing pressure: 140 bar - Overall width: 1750mm - Overall depth: 1750mm - Overall height: 1700mm (2450mm with lid open) - Power supply: 3~400V Optional equipment: - Belt oil skimmer - Low-pressure lance kit - Reinforced pump OTHER DIMENSIONS OF HYDRO WASH 2-IN-1 WASHERS AVAILABLE! MODELS 800 AND 1000 ALSO IN STOCK. CONTACT US FOR DETAILS ON OTHER MODELS.

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 2600/016GR.2 W-4667, Industrial washing machine Pero 2600 Kjdew Dhqljpfx Agtedl No. 2600/016GR.2 W-4667 Year of manufacture: 1991 Temperature of the washing and rinsing belt: 65–80°C Simatic S5 control system

Year of construction: 2025, operating hours: 50 h, condition: as good as new (ex-display), Spray-Flood Cleaning System – Parts Cleaning System for Highest Standards and Precision/Ultra-fine Cleaning Basket Internal Dimensions (Product Carrier): LxWxH 600x400x300 mm Max. Load Capacity: 150 kg; loading trolley in front of the unit included 3-Tank Configuration: Kdodpfx Ageg Itg Estol - Cleaning (600 liters) - Rinsing-1 (600 liters) - Rinsing-2 (600 liters) - System electrically heated - Cleaning methods: spraying, injection flooding, ultrasonic - Ultrasonic (rod transducer): 3,000 W effective / 6,000 W peak – 30 kHz - During cleaning, rinsing, and drying, the basket can remain stationary, swivel, or rotate (freely selectable in the program) - Hot air and vacuum drying (vacuum pump by Leybold, 300 m³/h) - Full filtration on all tanks (3), each equipped with Topline bag filter (by Eaton), filter fineness freely selectable - Automatic water replenishment in each tank - Preparation for coalescence oil separator - Preparation for installation of a demineralized water circulation system for rinsing water treatment Control system: Siemens S7-1200 with 16 programs Year of manufacture: 12/2025

Condition: good (used), Cleaning roll holder, floor stand, cleaning cloth roll holder Kdeder Im R Aopfx Agtjl -Manufacturer: Tork, Floor stand for cleaning cloth roll with waste bin -Type: W1 -Roller width: up to approx. 450 mm -Quantity: 5x cleaning roll holders available -Price: per piece -Dimensions: 710/590/H1010 mm -Weight: 8.1 kg/pc.

Condition: ready for operation (used), functionality: fully functional, total length: 1,100 mm, total width: 1,300 mm, total height: 1,600 mm, input voltage: 380 V, load capacity: 500 kg, empty load weight: 550 kg, Equipment: documentation/manual, Chamber washing system with rotary rack. Max. workpiece weight 500 kg, basket size 74x74 cm, max. workpiece height 66 cm. Includes loading trolley and cleaning powder. Operating manual available. Ksdpfxeymggvj Agtedl

Condition: excellent (used), Bous Waschfix 70/T3 WSA cleaning and degreasing plant BOUS Cleaning & Degreasing Plant Washfix Kdsdpfspudubsx Agtjl 70/T3 WSA Special equipment: Ultrafine filter Drain pump Filter monitoring Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: excellent (used), Rosink RFL Front Loader - Powerful water-based cleaning - Modular system - Cleaning of tall and long components - Easy operation, compact design - Low-maintenance operation - Base unit in stainless steel - Environmentally friendly Concept With the Rosink RFL front loader, we offer you an economical and user-friendly solution – especially suitable for cleaning tall components. The proven Rosink cleaning technology and the highest quality are thus combined in one system. The system is based on a single-bath system, standard with a rotary table, which can be expanded to a multi-bath system upon request. Within the wash chamber, various programs can run depending on the configuration and requirements, such as washing, rinsing, drying, etc. Features Basic unit in stainless steel 1.4301 Tank with sloping bottom Tanks and wash chamber including cladding and insulation Rotary drive with 4-point bearing Pneumatic lifting door with two-hand safety operation Transport trolley or loading table with stainless steel 1.4301 drip tray Pre-filtration via return filter baskets with usable height Selectable filter element: 200 μm or 500 μm Operating panel at the front with PLC for control (5 programs storable) Flat jet nozzle system entirely in stainless steel 1.4301 Automatic refilling system with bath level control Maintenance and inspection hatches for wash and rinse tanks Technical Data RFL 1650, variable depending on configuration Width: 2900 mm Kdodpfxex Exuqs Agtjl Height closed/open: 2800/4500 mm Depth without/with transport trolley: 2650/4500 mm Grid load capacity: 1000 kg Grid dimensions: 1320 x 1320 mm Grid diagonal: 1650 mm Connection voltage: 400 V, 50 Hz, 3Ph/N/PE Control voltage: 24 V / DC Washing capacity: 750 l Rinsing capacity: 500 l Pump capacity (washing): 7.5 kW at 630 l/min at 4.5 bar Pump capacity (rinsing): 4 kW at 250 l/min at 5.5 bar Drying capacity: 12 kW Heating capacity (cleaner): 36 kW Heating capacity (rinsing): 27 kW Weight: 3600 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, Fully Automatic Solvent Cleaning System KP50 HMA For operation with solvents (hydrocarbons or modified alcohol) under full vacuum. The cleaning and drying process runs fully automatically in a closed working chamber under vacuum. Component cleaning is performed via spraying, turbulence flooding, ultrasonic cleaning, and vacuum-assisted cleaning with freshly filtered and distilled solvent from the two storage tanks. Additionally, the system offers vapor degreasing with ultra-pure solvent vapor directly from the main distillation system. The final vacuum drying step ensures components are 100% dry, and the dual condensation stage minimizes solvent loss as well as emission and workplace exposure values (AGW). Technical data / Equipment: - 2-tank FULL VACUUM system incl. main and bypass distillation - Designed for flammable solvents (FP >55°C) - Includes basket holder with swing/rotation device - Basket dimensions: 520 x 320 x 200(h) mm - Batch weight: max. 50 kg/batch - System dimensions: approx. 2,300 x 2,250 x 3,000 mm (W x D x H) - Ultrasonic: 750 W, 40 kHz - 2 bag filters size 1 + preparation for an additional filter - Automatic working chamber door - Working chamber door in glass - Double loading table (sideways movable) in front of working chamber Kdsdjyi Sf Njpfx Agtel - 12" control panel - Main and bypass distillation - Remote maintenance module A chiller unit can be supplied optionally, if no cooling water is available on site. Price excl. VAT, transport, assembly/commissioning

Year of construction: 2009, condition: good (used), Bous Waschfix WSA 70 T3 cleaning and degreasing system BOUS cleaning & degreasing plant Waschfix WSA 70 T3 Usable space: 700 mm filling quantity: 180l / 180l Temperature +70 / +70 °C heating: 12 / 6 kW suction: 0,25 kW drying: 5 kW Compressed air: 6 bar Voltage: 230/400 V Control voltage: 24 DC Total consumption: 54 A 400 V Kdjdpfx Agepq N I Dstjl Year of construction: 2009 Special equipment: Ultrafine filter Drain pump Filter monitoring Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Year of construction: 2014, condition: excellent (used), Bous Waschfix T6/70 WSA cleaning and degreasing plant BOUS Cleaning & Degreasing Plant Washfix Kedpspuduxofx Agtodl T6 / 70 WSA Usable space: 700 mm filling quantity: 280l / 280l Temperature +70 / +70 °C Heating: 18 / 12 kW exhaust: 0,56 kW drying: 11 kW Compressed air: 6 bar Voltage: 230/400 V Control voltage: 24 DC Total consumption: 84 A 400 V Year of construction: 2014 Special equipment: Ultrafine filter Drain pump Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Year of construction: 1996, condition: ready for operation (used), Offered is a cleaning and degreasing system with steam extraction fan and oil skimmer, year of construction 1996, basket: Ø720mm, internal height: 140mm, workpiece: maximum usable height: 450mm, maximum batch weight: 500kg, overhaul: 2011: completely overhauled, renewed: gear motor, heater, gas spring and heating elements, documentation: operating manual, technical documentation and CE declaration of conformity available, overall dimensions X/Y/Z: 1190mm/1170mm/1170mm, weight: approx. 290kg. Inspection: possible by appointment. Kdsdpfxex Ect Ij Agtel

Year of construction: 2023, condition: new, Mobile complex for cleaning cars with ozone model Celette Trioxyclean, France. 6 units available. Fast and completely decompose harmful volatile organic compounds inside the car, such as formaldehyde, ammonia, benzene, TVOC (Total volatile organic compounds), etc., deodorize unpleasant smells of cigarette smoke, alcohol and food, effectively kill suspended bacteria and viruses, and protect passengers from cross infection. Ozone (O3) output: 5000mg/Hr Negative ion: 8 – 10 Million Ozone concentration: 15-25mg/L Sterilizer rate: 99.99% Cooling type: air-cooled Input Supply: 220/110 Volt | 50Hz/60Hz Weight: 37 KG Kdsdpfou Dpygjx Agtol Dimension (L x W x H) cm: 55 x 40 x 126

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total length: 1,820 mm, total width: 1,400 mm, total height: 1,800 mm, overall weight: 950 kg, input voltage: 400 V, input frequency: 50 Hz, load capacity: 100 kg, Equipment: documentation/manual, For sale: MAFAC Elba as a 2-bath cleaning system, year 2019, with approx. 2,500 cleaning cycles in very good condition. (Sale exclusively within Austria) Equipment: - Rotating warm air impulse blower - Stationary hot air drying system - Main stream fine filtration MT 1 - Main stream fine filtration MT 2 - Variable speed control of basket rotation - Control cabinet with top lighting Kdsdpfx Agjwyc Sistjl - Leveling kit - Timer - Safety grid MW 20 - Chemical dosing proportional to fresh water (2 units) - Suitable for Euro-standard baskets: 600 L x 400 W x 288 H mm

Condition: like new (used), Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input frequency: 50 Hz, temperature: 60 °C, load capacity: 250 kg, SUMMA DC3/OSK rotating basket, rotating drum cleaning equipment, Carousel degreasing machine with dryer. The chamber rotary machine of the Czech manufacturer operates on the principle of pressure spraying. The degreasing machine offers three surface cleaning combinations. The machine is suitable for surface degreasing of a wide range of materials. Ksdpfx Agswty H Djtjdl Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Max. workpiece size: 770x500mm Max. workpiece weight: 250kg Electr. Power: 23kw Bath temperature: Max. 60°C Air temperature: Max. 120°C Bath (rinsing) heating: 12/6kw Drying air heating: 13.5kw Aerosol pressure: 0.28Mpa Pump performance: 70 liters/minute Machine weight: 520kg Machine dimensions: 1800x1800mm Height: 1500mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: good (used), Cleaning container, safety container, cleaning container -Material: sheet steel Kdsdpfocnha Aox Agtjl -Container: Ø 295 x 235 mm -Strainer basket: Ø 265 x 100 mm -Number: 3x devices available -Price: per piece -Dimensions: 310/370/H740 mm -Weight: 8 kg

Condition: used, Cleaning container -Large: cleaning container -Interior dimensions: see photos -Performance levels: 5 -Price: per piece Kodpjd Skkyofx Agtjdl -Number: 2 pieces -Dimensions: 595/380/H660 mm -Weight: 38 kg

Condition: used, The SUNCOMBE SteriWasher is an innovative, robust, high-performance, and validatable parts washing system designed for use in the pharmaceutical, biotechnology, food and beverage, healthcare, and other critical sectors. The wash chamber is accessed via a sturdy hinged door and is constructed from 316 stainless steel, featuring a hygienic design. The combination of specially developed variable-power spray technologies enables the washer to deliver high-energy cleaning cycles alongside an energy-efficient rinsing process, easily selectable via simple recipe selection. Description SteriWasher™ parts washers utilize both proven and innovative technologies to provide an environmentally friendly cleaning solution with low water and energy consumption. They are suitable for production and research environments and can handle equipment ranging from critical small parts and tools to large mixers, drums, and containers. The product range is available with chamber sizes from 0.6 m x 0.6 m x 0.6 m up to the largest at 1.5 m x 1.5 m x 1.5 m. Customized variants with bespoke chamber sizes are also available to meet your requirements. The washers are fitted with crevice-free inserts and feature an airtight, leak-proof inflatable door seal for the complete unit and wash chamber. They come with standard or custom racks, with individually validated cleaning positions. These racks are removable and can be loaded onto mobile carts for easy loading and unloading. Models are available in single-door or double-door configurations for pass-through requirements. Washers are offered in single-door, straight double-door, or 90-degree double-door pass-through versions and are manufactured from 316 stainless steel to cGMP, EHEDG, ASME BPE, and GAMP standards, making them ideal for your wash area or cleanrooms. Features • 316L stainless steel chamber with radiused corners, sloped design, and crevice-free construction Kedsyf N Imspfx Agtodl • Standard and custom chamber sizes • One or two chemical dosing systems • Automatically locking hinged door with optional window and internal lighting • Inflatable door seal for maximum safety • Load trolleys and racks specifically engineered for your items • Hygienic pneumatically actuated valves and instruments • Hygienic stainless steel pumps • Stainless steel covers • HEPA-filtered air drying and cooling • Pharmaceutical-grade washing machine Specification KVP Philosophy: Total loss, full or partial recovery Discharge temperatures: Ambient up to 90°C (aqueous) / ambient (solvents) Material: 316 stainless steel, Duplex, or Hastelloy Operating temperature: Ambient up to 95°C (120°C turbo drying cycle) Operating voltage: 230VAC or 400VAC (24VDC control) Automation: CIPSuite Level 2000 to 4000 (optional DCS integration) Reporting: Printed records available, optional 21CFR11 electronic records and batch reporting.

Condition: ready for operation (used), Foresite C3 / C.I. Critical Cleanliness Control Tester Analytics Technology Year of manufacture: 2011 The C3 is unique among electronics cleanliness quality testers. It remains the only tester on the market that indicates whether a specific, critical area of a PCBA (Printed Circuit Board Assembly) is clean. Simply select the components and/or circuit areas most sensitive and vulnerable to contamination and/or reliability issues, and test a small area (0.1 in²). The C3 quickly provides feedback as to whether potentially detrimental residues, often caused by manufacturing processes, are present. Once the critical areas to be tested have been identified, the operator simply inserts a new disposable test cell into the vapor head and manually positions the head via the articulated arm over the test area. The weight of the arm and vapor head seals the test cell on the test surface. The operator then starts the automated testing sequence. Within 7-10 minutes, the operator knows whether the tested product area meets cleanliness standards. The C3 can be used directly in the production area. At the end of the test, the cell can be easily removed using the cell ejector on the head. The test sample in the cell, efficiently extracted from the small test area using steam, can undergo further analysis to identify specific contaminants and their concentrations. The entire test is simple and straightforward for the operator, with results not dependent on operator skill. The use of Pro-Site single-use test cells and extraction solution prevents cross-contamination of samples. You are welcome to arrange an inspection. We can also organize cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be provided, provided a valid VAT ID number is available. Subject to prior sale. Visit our shop and take a look at our other offerings as well. Brand names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Kjdpfx Aexhcklegtsdl Technical data deviations and errors in the description of the item may occur and are subject to change.

Year of construction: 2025, condition: as good as new (ex-display), The "RH S" spray cleaning system is a compact, space-saving, fully automatic cleaning system designed to meet demanding requirements for cleaning/degreasing and drying results. Component cleaning can be performed with the basket in a stationary, swiveling/oscillating, or rotating mode. The spray system, featuring multiple spray bars mounted on the longitudinal and end sides, is fixed inside the working chamber. Kedpfogrm Dfsx Agtjdl Basket dimensions: LxWxH 470x320x200(h) mm Two baskets can be washed in parallel (simultaneously) Maximum loading weight: 100 kg Spray pressure (wash cycle): 4 bar, Circulation rate: 360 l/min Control: Siemens S7-1200 with KTP700 touch panel Includes hot air drying (12 kW) Includes compressed air impulse blowing Includes steam extraction Includes stainless steel exterior cladding Includes preparation for retrofitting an oil separator Includes bag filter for medium maintenance Includes 2 stainless steel wire baskets, 470x320x200(h) mm System dimensions: LxWxH 1,425x1,920x1,980(h) mm Dimensions include open loading door Electrical connection value: approx. 25 kW

Condition: as good as new (ex-display), Year of construction: 2025, HD washbasin - HD brush washbasin The washbasin has an adjustable 60 bar high pressure pump with which cleaning takes place in a closed work area. The cleaning takes place with an aqueous degreaser (10kg included in delivery) and at approx. 45 ° C. Viewing window including lighting Medium filtration through a candle filter Comfort operation by means of a foot switch including turntable Technical specifications: Working area: 1,200 x 700 mm Kdedpfeurud Ejx Agtol Usable height: 400 mm Payload: 50 kg Operating pressure: adjustable up to max. 60 bar Pump output: 14 lt / min Washing temperature: adjustable up to max. 45 ° C Tank capacity: 170 lt Heating capacity: 4,000 W. Total output: 8.0 kW Voltage: 400 V ac 1 P + N + PE; Frequency: 50 Hz Machine weight: approx. 180 kg Overall dimensions with the lid open: 1,480 x 991 x 2,080 mm

Condition: excellent (used), BIO-CIRCLE Type: RWR 80L Auto KST Description: Kdjdpfxstqfbbe Agtjl RWR 80 L KST fully automatic SPS parts washer The RWR units from Bio-Circle are the optimum solution for cleaning internal circulation systems without dismantling. The unit is space-saving, quiet and very easy to operate. Thanks to the completely closed system, there is no unpleasant odor from the cleaner or the dirty water. External dimensions → approx. 1200 x 800 x 1050 mm Power supply → 400 V 50 Hz plug 16A CEE 5p 6h Drain → 1 1/4" outlet Technical specification: Type of soiling: limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, small quantities Component geometry: Whole components (without disassembly) Seal of quality: Stainless steel, service package available Maximum filling capacity: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heating: 4.5 kW Flow rate: 25 l/min Temperature (default setting): 60 °C Total weight of the cleaning system without tank filling: 180 KG Area of application: The RWR 80 L KST fully automatic PLC has been developed for the plastic injection molding sector and can be used wherever cooling channels (circulation systems, pipes) need to be cleaned. Application: Fill the RWR 80 L KST fully automatic SPS with Power Cleaner KST 2.0. As soon as the minimum fill level is reached and the system is switched on, the system starts to heat up. During the heating-up period, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and the flow direction change run automatically, after the instructions shown on the display have been confirmed. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: not inspected (used), DÜRR Type: DÜRR 1C gluing system Kodpfx Agerdyb Ajtjdl Dürr 1C gluing machine with drum pump, dosing unit and heated hose (approx. 5m). Technical description of the machine: Condition of the system Barrel pump, delivery hoses, dosing unit etc. are contaminated with old glue and must be cleaned or replaced. and must be cleaned or replaced. The machine has approx. 20 operating hours. Machine was used in a research facility. Year of construction 2017 Air inlet pressure max 6 bar Dimensions: approx. 1.5x1x1.5 meters 1 DÜRR adhesive control unit (110017040) 1 single barrel pump (110014004) Weight: approx. 300 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have over the phone.

Condition: used, TECHNICAL DETAILS Kdjdpfxow Ihtae Agtol - Machine equipped for cleaning polishing paste for luxury industry parts

Condition: new, functionality: fully functional, gearing type: hydrostat, color: green, overall weight: 1,200 kg, Year of construction: 2026, Equipment: additional headlights, adjustable boom, adjustable chassis, hydraulics, traction control, SUNLITE SL240- SL340- SL440- SL510- SL640 Kodpex Thn Nsfx Agtjdl Mazaka Sunlite solar panel cleaning brush is a professional cleaning solution designed to ensure photovoltaic modules operate at maximum performance. Equipped with high-quality, non-abrasive soft bristles, it safely removes dust, dirt, bird droppings, and other environmental residues without damaging the panel surfaces. With its ergonomic design and durable construction, it delivers high efficiency even during long-term use.