Used machine and parts cleaning equipment for sale (124)

Condition: good (used), Year of construction: 2003, Parts cleaning device, IBS, – used - : Price per unit: €350 (net) Manufacturer: IBS Scherer GmbH Model: Type F2 Year of manufacture: 2003 Serial number: 44675 Power connection: 1/N/PE 230V, 50Hz Rated power consumption: 18W, 0.2A Load capacity: 60 kg Width: 800 mm Net weight: 50 kg Drum size: 50-litre drum Frame material: sheet steel Height: 1125 mm Cleaning medium: special cleaner Cleaning tank width: 790 mm Cleaning tank depth: 540 mm Condition: good Available: immediately Kdedpox El A Ujfx Agtsl Location: Warehouse Frankenberg / Saxony

Year of construction: 2013, condition: used, total power requirement / kW weight of the machine ca. / t Ksdpey S Dzcsfx Agtsdl required space / m

Year of construction: 2015, condition: ready for operation (used), Cleaning system is fully functional. Usable dimensions: Diameter 800mm, usable height 700mm. Tank volume: 500L. Options: Sludge drain Steam extraction Oil skimmer separator Magnet rod for metallic particles Volumetric chemical dosing Kjdpfsy Txcksx Agtodl Bag filter

Condition: used, Parts cleaning system from renowned Austrian company Machine comes from company liquidation, was in operation until the end. Cleaning agents are included. Kdodsvcrutopfx Agtol

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Kdsdpfxofz A D No Agtol Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, An automatic car wash is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic car wash is equipped with a set of pumps for spraying, it has been designed so that as little liquid as possible migrates to subsequent processes after the process, saving money and improving the quality of washing. This is very important, because the apparent savings in systems made without the use of these solutions may generate much higher costs in the future related to chemicals and waste disposal, which will be simply more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development works allowed us to develop a car wash with the function of drying details (Option) with hot air blown by a set of fans after the washing process. The car wash is equipped with an advanced system of creating own macro programs, which can consist of 10 steps each, depending on the number of tanks, the processes can be repeated, their order can be changed, etc. Each of the tanks has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be carried out e.g. between processes or at the end of the cycle. • Controls installed on a swivel arm for better access • PLC microprocessor control • 7 "touch control panel • A very large number of nozzles compared to other solutions • (Option) Possibility of drying details after washing • Ability to create your own advanced programs • Advanced system of dampers made of acid-proof steel sheets, double secured with limit switches • Control system for tight closing and full opening of the flaps Ksdpfx Agsfy T Rcjtedl • To minimize fluid mixing, separate lines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, the fluids cannot be mixed • Fully automatic operation

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, total length: 1,260 mm, total width: 1,110 mm, total height: 2,600 mm, overall weight: 1,600 kg, Used Cleaning Machine Type RCTS petite / 2 Technical Data: Cleaning medium: Halogen-free hydrocarbon or modified alcohol It is recommended to use a high-quality solvent such as (DOWCLENE TM 1601 or) DOWCLENE 1621 With CE marking, roll-standard version according to drawing 5I05204X1-3---- Kjdeyud Nqopfx Agtedl The system complies with the 31st Federal Immission Control Ordinance (as of 21.08.2011), Swiss Air Pollution Control Ordinance (as of 01.03.1998), Austrian VAV Ordinance (as of 26.07.2022), and the EU VOC Directive 199/13 The RCTS system is designed as a single-chamber flood cleaning unit. The system operates under full vacuum at approx. 100 mbar absolute pressure, which eliminates the need for explosion protection. Basket size / batch size: 260 x 160 x 95/100mm to be clarified Maximum batch weight: 15 kg Year of manufacture: 2018 Operating hours: hours per Condition: Completely overhauled in 2026, very good condition

Condition: excellent (used), Year of construction: 2020, operating hours: 17,000 h, functionality: fully functional, machine/vehicle number: 863/2020, total height: 2,100 mm, inner dimension length: 530 mm, inner dimension width: 320 mm, inner dimension height: 200 mm, input voltage: 400 V, type of input current: AC, input frequency: 50 Hz, electrical fuse: 50 A, input current: 40 A, temperature: 70 °C, heating capacity: 6 kW (8.16 HP), load capacity: 40 kg, Equipment: documentation/manual, Höckh Multiclean Lean Concept III, including filling with new Safechem Dualene 1601 solvent. Everything is complete and ready for use and is sold as a complete package. The system offers options for immersion spraying, steam degreasing, and ultrasonic cleaning. Remote maintenance is prepared and only requires an internet connection. In addition to the system, the scope of delivery includes: - automatic basket feed - 3 cleaning baskets - chiller for system cooling - complete documentation The system can be inspected and tested before purchase. After the purchase, we will gladly assist with dismantling and loading, and can also provide a brief training session on machine operation and maintenance. The system is fully functional and in very good condition. We are selling this system because we now have a larger system in operation. Kjdsy Sxn Depfx Agtodl

Year of construction: 2018, operating hours: 4,000 h, condition: like new (used), Lanner Vetamat SFT350/063-DS32 Chip Processing System with Push-Bottom Centrifuge 100% operational, low operating hours, excellent condition, currently still installed and can be inspected on site, immediately available Manufacturer: Lanner Anlagenbau GmbH Model / Type: Vetamat SFT350/063-DS32 Machine type: Chip processing system / chip centrifuge / chip de-oiling system Year of manufacture: 2017 Commissioned: 2018 Condition: Used Control system: Siemens S7 Country of origin: Germany Kjdpfx Asy N Axuegtodl Original value (according to info): €183,771 net Availability: Immediate, system needs to be dismantled at short notice Technical Data: System type: Lanner Vetamat SFT350/063-DS32 Centrifuge type: DS32 push-bottom centrifuge Conveyor: SFT350/063 hinge belt conveyor Chip crusher: Lanner S50GF Lifting and tipping device: MD-3 / Vetamat Lifting and tipping device capacity: max. 500 kg Infeed hopper: wear-resistant manganese steel Infeed hopper volume: approx. 280 liters Tank capacity: approx. 250 liters Max. centrifuge throughput (acc. to offer): approx. 375 l/h Motor power DS32 (acc. to datasheet): 5.0 kW Weight DS32 (acc. to datasheet): approx. 1,650 kg Dimensions DS32 (acc. to datasheet): approx. 4,230 x 1,320 x 2,290 mm Dimension D (acc. to datasheet): 750 mm Operating modes: Automatic and manual operation Documentation (acc. to offer): Operating instructions, circuit diagram, parts lists, project planning Throughput capacity by material (acc. to Lanner documentation): - Steel / Stainless: approx. 375 kg/h - Aluminum: approx. 125 kg/h - Cast iron: approx. 560 kg/h - Brass: approx. 280 kg/h - Grinding sludge: approx. 250 kg/h Actual throughput depends on material, chip shape, and coolant used. Equipment / Scope of Supply: - Lanner Vetamat chip processing system - DS32 push-bottom centrifuge - S50GF chip crusher - SFT350/063 hinge belt conveyor - MD-3 / Vetamat lifting and tipping unit - Hopper approx. 280 liters - Tank approx. 250 liters - Coolant separation box - Siemens S7 electrical cabinet - Hydraulic unit with hydraulic oil - Coarse material lock - Inspection hatches - "Hopper" cleaning unit - "Conveyor" cleaning unit - Pump with hose and dispensing gun - Sediment baskets with Ø 2 mm perforation - Drip tray - Level sensors - "Chip wagon present" sensor - "Chip wagon level" sensor - Float switch for external tank / oil drum full - Material preselection switch - Coolant selection switch - Operator console / control cabinet with indicator lights and controls Description: For sale is a used Lanner Vetamat SFT350/063-DS32 chip processing system, year 2017. The system is designed for processing metalworking chips. It reliably separates coolant or oil from metal chips, enabling efficient de-oiling and drying of the chips, and recovery of cutting fluid / oil. The system consists of a DS32 push-bottom centrifuge, an S50GF chip crusher, an SFT350/063 hinge belt conveyor, a lifting and tipping device, tank, coolant separation box and a Siemens S7 control system. According to documentation, the machine is suitable for short, free-flowing metal chips and metal sludge. The system is not suitable for bar ends, workpieces, scraps, waste, extremely long chips, stringy chips, or oversized coarse parts. The unit was commissioned in 2018 and is in flawless condition. The original stated purchase price was €183,771 net. Inspection possible by appointment. The system must be removed immediately due to new machinery investments.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), Parts Cleaning System / Spray Cleaning System Type CM13 2-Tank (Washing + Rinsing) including air knife blow-off Basket Diameter: 1,300 mm (octagonal) Max. load capacity: 1,000 kg Basket is loaded and unloaded by the operator using a transfer cart (detachable/mobile) positioned in front of the machine. Useful height: 800 mm Wash tank: Volume: 430 liters, Spray pressure: 6.0 bar Rinse tank: Volume: 280 liters, Spray pressure: 4.0 bar Total connected load: approx. 52 kW Control: Siemens S7-1200 with KTP700 touch panel Including the following features: + automatic water refill for both tanks + automatic chemical dosing 1-10% (Dosatron) + special spray system (can be optionally activated) for small components (= E-spray system) + side channel blower with height-adjustable air knife system (blow-off drying) + steam extraction including condensate return + weekly timer for electric heating + pre-configured for retrofitting an oil separator + media filtration via bag filter (manufacturer Eaton, Topline) in both circuits (washing and rinsing) + external cladding with stainless steel sheet + complete system fully insulated + tanks separated into two modules; fully insulated (different temperatures possible) + removable filter baskets in the return flow Kdjdpfxjv Tm Ayo Agtjl + stainless steel circulation pumps incl. mechanical seal and soft starter The system is exhibited at the Glogar Technology Center and is used exclusively for washing trials.

Year of construction: 1990, condition: used, CIP plant for Seitz combifilter Year of construction: 1990 The manual system consists of caustic tank, heat exchanger and circulation pump. Kedpfxow Uc Hbe Agtedl Additional title: one tank, heated CIP-Tank: 1500 l

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: E 118/09025, For sale: OTEC fine polishing machine - Type: ECO 1 X 18 - Machine No.: E 118/09025 Kedey Rzxcjpfx Agtodl - Year: 2009 - Weight: 50KG The machine has been regularly serviced and maintained and is in excellent condition. The polishing machine has seen very little use and is practically like new. It is suitable for fine polishing, cleaning, and deburring of demanding workpieces that have undergone various machining processes. Workpieces are placed in a tank together with media and coolant, where they are rotated and vibrated simultaneously, resulting in effective polishing. The machine operates fully automatically, with adjustable polishing time, vibration frequency, and rotation speed. It is connected to the mains and ready to operate.

Year of construction: 2006, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 70/060260, For sale: OTEC fine polishing machine - Model: DF 70 Kodpfx Ajy Rzwxjgtsdl - Serial No.: 70/060260 - Year of manufacture: 2006 - Power: 2 kW - Weight: 450 kg Machine Accessories: - Coolant tank - Automatic polishing paste dosing system - Report printer - 10 tool holders - 1 mixer holder I am offering a polishing machine designed for the ultra-fine finishing of various metal parts after machining operations. Additionally, it is suitable for cleaning heavily soiled or stubborn residues from parts made of different materials. The machine is fully automatic and equipped with an additional coolant tank, preventing overheating of media and workpieces during operation and enabling continuous polishing for 10 hours or more. The polishing process involves fully or partially immersing the workpieces in the polishing media, allowing the granulate to reach all surfaces evenly. This ensures an even finish, even in deep or hard-to-reach areas. The machine has seen very little use and has been regularly maintained. It is currently connected to the electrical supply and ready for immediate operation.

Year of construction: 2026, condition: new, Parts cleaning system, spray cleaning system type L90 automatic hot water parts washer with automatic basket drive by means of gear motor, stainless steel washing pump (Lowara), rotating 3-sided spraying system (from below, from the side and from above) with stainless steel nozzles. - basket diameter: 790 mm - useful height: 500 mm - max. loading weight: 150 kg - spraying pressure: 3 bar - tank volume: 105 litres - heating: electrically adjustable (RT - 90°C) plant dimensions (LxWxH): 1.150 x 1.250 x 1.900h mm Empty weight: approx. 220 kg Washing time clock freely adjustable via Omron timer (minutes and hours) complete cleaning machine (interior and exterior) made of stainless steel 1.4301 water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid lock Bath cover with fine filter (2.000 micron) Suction filter as pump protection Operating hours counter Steam vapour extraction incl. condensate recirculation Preparation for later installation of an oil separator Parts washer is as good as new, never used. OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST !!! Kedpfxjhgh I Se Agtsdl

Year of construction: 2025, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning machine type L102 automatically working hot water parts washer with basket drive by means of a 2 stainless steel washing pumps (Lowara), 2 rotating 3-sided spraying systems. Ksdpfshymmgex Agtsdl spray systems. - basket diameter: 910 mm - useful height: 520 mm - max. loading weight: 200 kg - spraying pressure: 2x 3 bar - tank capacity: 175 liters - heating: electrically adjustable (RT - 90°C) plant dimensions (LxWxH): 1.300 x 1.250 x 1.990h mm empty weight: approx. 300 kg washing time clock freely adjustable (minutes and hours) complete cleaning machine (interior and exterior) in stainless steel 1.4301 manufactured water circulation and loading basket made of stainless steel 1.4301 bath cover with fine filter (2.000 micron) 2 pcs. suction filter as pump protection steam vapor extraction incl. condensate recirculation it is an exhibition machine from Glogar Technology Center.

Year of construction: 2026, condition: new, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Kedpfofl Ufzox Agtsdl

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system type L102 automatically working hot water parts washer with basket drive by gear motor, 2 stainless steel washing pumps (Fab. Lowara), 2 pieces circulating 3-sided spray systems. Insulation of the complete system included. - Basket diameter: 910 mm - useful height: 520 mm - max. loading weight: 200 kg - spraying pressure: 2x 3 bar - tank volume: 175 liters - heating: electrically adjustable (RT - 90°C) plant dimensions (LxWxH): 1.300 x 1.250 x 1.990h mm empty weight: approx. 300 kg Washing time clock freely adjustable (minutes and hours) complete cleaning machine (interior and exterior) made of stainless steel 1.4301 water circulation and loading basket made of stainless steel 1.4301 insulation of the complete system (tank and cabin) made of stainless steel 1.4301 mechanical lid lock bath cover with fine filter (2.000 micron) 2 pcs. suction filter as pump protection operating hours counter Steam vapor extraction incl. condensate recirculation Ksdpfxec S Tlas Agtsdl Oil skimmer for bath maintenance Insulation of the complete system Parts washer is as good as new (test plant/technical center) OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST !!!

Year of construction: 2025, condition: new, Parts cleaning machine, spray cleaning system type L122 automatically working hot water chamber washing machine with basket drive by gear motor, housing of the unit made of stainless steel 1.4301, - 2 pieces 3-sided arranged nozzle systems made of stainless steel with stainless steel flat spray nozzles, - 2 pieces washing pumps made of stainless steel (Fab. Xylem/Lowara), - level control as protection against dry running - 2 pcs. suction filter as pump protection - Oil skimmer for bath maintenance - basket diameter: 1.150 mm - useful height: 700 mm - max. loading weight: 300 kg - spray pressure: 2x 3 bar Kodpfx Ajhl Ic Rjgtsdl - tank capacity: 270 liters - heating: electrically adjustable (RT - 60°C) - connected load (electric): approx. 11,5 kW - plant dimensions (WxDxH): 1.480 x 1.540 x 2.195(h) mm

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system type L102 automatically working hot water parts washing machine with basket drive by means of gear motor, 2 stainless steel washing pumps (Fab. Lowara), 2 pieces circulating 3-sided spraying systems. Insulation of the complete plant included. - Basket diameter: 910 mm - useful height: 520 mm Kdodpfx Agodz Dy Hjtjl - max. loading weight: 250 kg - spraying pressure: 2x 3 bar - tank volume: 175 litres - heating: electrically adjustable (RT - 90°C) plant dimensions (LxWxH): 1.300 x 1.250 x 1.990h mm Empty weight: approx. 300 kg washing time clock freely adjustable (minutes and hours) complete cleaning machine (interior and exterior) made of stainless steel 1.4301 water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid lock Bath cover with fine filter (2.000 micron) 2 pcs. Suction filter as pump protection Operating hour meter Steam vapour extraction incl. condensate recirculation Parts washer is as good as new (test plant/technical centre) OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST !!! This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system type L90 automatic working hot water part washing machine with basket drive by gear motor, stainless steel washing pump (Fab. Lowara), circulating 3-sided spray system with stainless steel nozzles - Basket diameter: 790 mm - Useful height: 500 mm - maximum loading weight: 150 kg - Spray pressure: 3 bar - Tank volume: 105 litres - Heating: electrically adjustable (RT - 90°C) System dimensions (LxWxH): 1,150 x 1,250 x 1,900h mm Kerb weight: approx. 220 kg Wash timer freely adjustable (minutes and hours) complete cleaning machine (interior and exterior cladding) made in stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid locking Kdsdpfxod H Slas Agtsl Bathroom cover with fine filter (2,000 micron) Intake filter as pump protection Oil skimmer for bath maintenance Operating hour counter Steam swath extraction incl. condensate recirculation Part washer is as good as new (test plant/technical plant) OTHER KORBDIMENSIONS ON REQUEST !!! AVAILABLE

Year of construction: 2017, operating hours: 14,932 h, condition: used, machine/vehicle number: IntNr231417, Technical Description – PERO RO Manufacturer: PERO AG Model: RO R1 / 414-EX Year of manufacture: 2017 / 10 Machine type: Cleaning system / Degreasing unit Process: Solvent cleaning (e.g. modified alcohols or hydrocarbons) Technical data (typical for this series): Cleaning system: Closed-loop, fully automatic Working chamber dimensions: approx. 530 × 320 × 200 mm Max. batch weight: approx. 50 – 80 kg Kdjdpfx Agjy Htvrotsl Solvent: Modified alcohol (hydrocarbon-based) Drying: Vacuum drying Control: PLC control with touch panel Equipment: Integrated distillation unit, filtration system, oil separator Power consumption: approx. 10 – 15 kW Vacuum pump: Integrated Condition: Very good, well-maintained condition – from ongoing production Special features: • Energy-efficient cleaning system with closed solvent circuit • High cleaning quality with minimal solvent consumption • Ideal for precision engineering and machining businesses The machine can be inspected under power by prior appointment. Subject to technical changes, errors, and prior sale.

Year of construction: 2025, operating hours: 3 h, condition: as good as new (ex-display), functionality: fully functional, 3000W Continuous Wave Laser Cleaner. Designed for demanding industrial applications requiring power, speed, and robust processing. Suitable for: – Removal of oil and grease from metal parts – Paint and corrosion removal from metal structures – Cleaning of steel beams, platforms, and tanks – Cleaning of welded seams prior to IBR inspection – Industrial equipment refurbishment Features: – 3000W continuous fiber laser (CW) – Raycus laser source – 10m cable length – SUP 22C laser gun – Weight: 200 kg – Wheels for easy mobility – Water cooling system – 16L industrial chiller – CE marking – Stable temperature during prolonged use – High cleaning efficiency and stable operation – Industrial grade, designed for everyday operation Kjdpfxoy Iv Tco Agtsdl – Can be used as a mobile or stationary unit CSI Support team provides technical assistance and operational training in our laser cleaning center. Consulting and development of safety procedures for both indoor and outdoor operations.

Year of construction: 2006, condition: used, Technical data of the basic equipment Electrical connection values: Device total 230/400V 50Hz 50A 35 KW Motor washing pump 400/690V 50Hz 9,5A 4KW Heating elements: (3x9kW) 230/400V 50/60Hz 13,5A 9KW Motor steam extraction 230/400V 50HZ 1.1A 0,45kW Motor rotary basket drive 230/400V 50Hz 1.1A 0.37kW Pneumatic connection values: Compressed air supply line min. 6 bar / max. 10 bar Performance data: Wash pump flow rate 280 l/min Delivery pressure washing pump 5 bar Dimensions, weights, contents data: Liquid volume tank 1 washing 650 L liquid volume tank 2 rinsing 265 L perm. basket load 750kg usable basket diagonal 1400 mm usable height in the unit 800 mm loading height 920 mm height approx. 3010 mm width approx. 2365 mm depth approx. 1665 mm Kdsdpon Nyt Hefx Agtol empty weight approx. 1320 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, WEBEN / CEEVER Washing Tunnel with Robot, Conveyor, and Inspection System Manufacturer: WEBEN / CEEVER Application: Automated parts handling downstream of a press (press not included), washing, drying, and quality control Description: This system is an automated solution for retrieving and transferring parts from an upstream press. Robots pick up the parts and move them via a conveyor and transport system through an industrial washing tunnel (wet cleaning), followed by an inspection/measuring system for quality assessment. The complete process chain is designed for continuous operation, integrating robotic handling, washing process, conveyor technology, and automatic quality decision (OK/NOK). Technical Specifications – Washing Tunnel Year of manufacture: 2021 Cleaning process: spray-spray system (water-based), air blow-off, hot air drying Max. workpiece dimensions: length 1,400 mm Max. workpiece dimensions: depth 2,000 mm Max. workpiece dimensions: height 10 mm Max. workpiece weight: 12 kg System dimensions: width 3,000 mm System dimensions: depth 35,500 mm System dimensions: height 3,400 mm Weight (empty): 20,000 kg Weight (operational): 27,000 kg Material in contact with media: stainless steel AISI 304 Washing tank volume: 4,000 liters Washing tank heating: electric 80 kW Rinse tank volume: 2,500 liters Rinse tank heating: electric 40 kW Washing pump: 2,000 l/min, 6 bar, 30 kW Rinse pump: 900 l/min, 6 bar, 15 kW Washing filtration: 4 bag filters, 100 µm Drying: electric 48 kW Kjdpfx Agoy Ein Ujtedl Electrical connection: 380–400 V / 50 Hz / 3 Ph + N Total connected load washing tunnel: 385 kW Compressed air for automation: 6–8 bar, 1/4" connection Compressed air blow-off: 6–8 bar, 4 connections, approx. 30,000 Nm³/h consumption, 1 1/4" connection Technical Specifications – Robot, Conveyor, and Inspection System Control: Siemens PLC S7-1500 1517F Operator panel: Siemens TP1900 Comfort Robot: KUKA KR50 R2500 IONTEC with KRC4 (multiple robots in line) Conveyor technology: multiple conveyor lines / transport zones Max. conveying speed: up to 24 m/min Inspection system: laser measuring system with automatic OK/NOK evaluation and sorting Location: EU

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, Connection: 3.55 kW / 230 V / 50 Hz External dimensions (WxDxH): 945 x 830 x 1025 mm External dimensions (WxDxH, open): 945 x 830 x 1640 mm Weight: 60 kg Basket diameter: 600 mm Useful height: 380 mm Pump pressure: 2.2 bar Spray volume: 4,200 l/h Load capacity: 100 kg The soiled item to be cleaned is placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and time, the unit is switched on and the cleaning solution in the tank is heated. Inside the closed machine, the basket rotates at a constant speed around its own axis. The pump system draws the cleaning solution from the wash tank and feeds it through 6 stainless steel spray pipes equipped with overlapping flat jet nozzles. The item is thoroughly sprayed from all sides with hot solution during even rotation of the basket, which is driven by the jet action. After the cleaning cycle is complete, the unit shuts off automatically. Advantages: - 1 horizontally mounted pump - Flow rate: 70 L/min - 3 three-dimensional stainless steel spray pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (Ø 170 mm) - Rotating stainless steel wash basket driven by water jet Kdedpfsxiwc Ssx Agtel - Steam extraction - Stainless steel perforated plate with filter inlets above the wash tank - Water shortage safety device