Used machine and parts cleaning equipment for sale (120)

Condition: good (used), Cleaning roll holder, floor stand, cleaning cloth roll holder -Manufacturer: Tork, Floor stand for cleaning cloth roll with waste bin -Type: W1 -Roller width: up to approx. 450 mm -Quantity: 5x cleaning roll holders available -Price: per piece Fsdpsr Im R Aefx Anmepk -Dimensions: 710/590/H1010 mm -Weight: 8.1 kg/pc.

Condition: used, Cleaning container -Large: cleaning container -Interior dimensions: see photos -Performance levels: 5 -Price: per piece Fsdpod Skkyjfx Anmopk -Number: 2 pieces -Dimensions: 595/380/H660 mm -Weight: 38 kg

Year of construction: 2009, condition: excellent (used), Cleaning system is fully functional. Fpsdpfxszkkb De Anmsk Working dimensions: diameter 800mm, working height 600mm Tank volume: 90L Options: Automatic cleaning or with washing brush Interior lighting Design / Accessories: Direct drive for the washing basket Mist extraction Low water level protection / level control Lid locking Weekly timer Chip/particle filter with bath cover plate 5 ECO rinse (fresh water) for minimal water consumption with machine-side hot water preparation Three-dimensional cold air blow-off Oil skimmer Drainage device / bottom flush with pump in gray cast iron and galvanized pipe system Hose connection and tap valve in aluminum/plastic

Condition: excellent (used), BIO-CIRCLE Type: RWR 80L Auto KST Description: RWR 80 L KST Fully automatic PLC parts cleaning system The RWR systems from Bio-Circle are the optimal solution for cleaning internal circuit systems without dismantling. The unit is space-saving, quiet and very easy to operate. Due to the completely closed system, there is no odor nuisance from the cleaner or the dirty water. External dimensions: approx. 1200 x 800 x 1050 mm Power supply: 400 V 50 Hz, 16A CEE 5p 6h plug Fjdpfx Anezgclmsmepk Drain: 1 1/4" outlet Technical specifications: Type of contamination: Limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, low quantities Component geometry: Whole components (without dismantling) Quality seals: Stainless steel, service package available Maximum filling capacity: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heater: 4.5 kW Flow rate: 25 l/min Temperature (preset): 60 °C Total weight of the cleaning system without tank filling: 180 kg Application area: The RWR 80 L KST fully automatic PLC has been developed for the field of plastic injection molding and can be used wherever cooling channels (circuit systems, lines) need to be cleaned. Application: Fill the RWR 80 L KST fully automatic PLC with Power Cleaner KST 2.0. Once the minimum fill level is reached and the system is switched on, the system begins to heat up. During the heating-up period, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and the change of flow direction run automatically, after the instructions displayed on the screen have been confirmed. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data, specifications are subject to change!) We would be happy to answer any further questions you may have on the phone.

Condition: not inspected (used), DÜRR Type: DÜRR 1K adhesive application system Dürr 1K adhesive application system with drum pump, dispenser, and heated hose (approx. 5m). Fsdpjzgckcofx Anmspk Technical machine description: Condition of the system The drum pump, feed hoses, dispensing unit, etc. are contaminated with old adhesive and must be cleaned or replaced. The system has approximately 20 operating hours. The machine was used in a research facility. Year of manufacture: 2017 Air inlet pressure, max. 6 bar Dimensions: Approx. 1.5 x 1 x 1.5 meters 1 Adhesive control unit DÜRR (110017040) 1 Single drum pump (110014004) Weight: approx. 300 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: new, functionality: fully functional, total length: 1,200 mm, total height: 2,100 mm, total width: 2,500 mm, empty load weight: 750 kg, input voltage: 400 V, water tank capacity: 400 l, warranty duration: 12 months, DPF DUO PREMIUM = CLEANING CABIN + DRYER FOR DPF/FAP FILTERS This set of devices allows for maximum optimization of the regeneration process. A well-organized operator can work with three filters simultaneously. Washes Dries Advantages of the DPF DUO Premium: -> A separate dryer doubles work efficiency -> We are the only ones to offer a large-diameter hose that connects to the DPF. A larger diameter = more water = more effective cleaning -> Our filter mounting system is free of elements placed inside the DPF filter tube that could block the water flow. This allows the full performance of the water and air pump to be utilized, shortening regeneration time. -> The large cabin provides the freedom to mount the cleaned filter. The operator, based on their experience, can choose the position in which the filter will be washed. -> Protection against excessive pressure in the filter during cleaning -> Protection against lack of airflow through the filter during drying -> Possibility to individually set the cleaning program according to the filter capacity -> Stable securing of the filter during drying -> Three-stage dirty water filtration system -> Water heating controller -> Insulated water tank -> Training at the customer's site can be provided The device enables the removal of soot and ash from DPF/FAP filters without negatively impacting the filter structure, restoring up to 99% of the nominal flow rate. Our technicians have dedicated significant effort to ensure that both the cleaning procedures and the detergents used are safe for the environment and machine operators. The operator checks the filter for mechanical damage using an endoscopic camera. If signs of melting, ceramic core cracks, or other apparent mechanical damage interfering with the DPF are detected, regeneration will not be possible. The regeneration process takes place in a closed chamber equipped with filters preventing harmful contaminants from escaping into the environment. Water with cleaning fluid circulates in a closed loop and is filtered throughout the process, significantly extending bath life. The DPF DUO Premium cleans filters using water, chemistry, and air. A precisely selected, computer-controlled sequence of water and detergent dosing, combined with air and impulses generated by compressed air, ensures high regeneration efficiency. Fsdpfx Ajxm Szqjnmjpk After the cleaning process is complete, an additional device dries the filter with air at 90°C, ensuring complete evaporation of the cleaning solution. After drying, the machine performs a final backpressure measurement. This measurement can also be taken before cleaning, allowing subsequent comparison of backpressure values before and after the process. The device is equipped with a printer that allows generating a measurement report. The washing time for filters from passenger cars or light commercial vehicles is 20–40 minutes, which enables regeneration of up to a dozen filters in 8 hours. High efficiency combined with low operating costs guarantees a rapid return on investment.

Year of construction: 2026, condition: as good as new (ex-display), Manual cleaning is performed using special gloves in the front section. The effectiveness of the cleaning process is ensured by a high-pressure pump and a special spray nozzle. In these devices, a temperature of up to 60°C can be set for the cleaning fluid. The pressure is adjustable from 1 to 80 bar. Fpjdpfef A Nq Asx Anmek Technical data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg, optionally up to 150 kg Spray pressure: adjustable from 1-100 bar Tank volume: 75 liters / heating power 2 kW Standard configuration: • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel sheets above the tank • Upward-opening flap with 2 handles and gloves • Window made of tempered glass • Door opening/closing system with gas spring assistance • Monitoring of door opening by means of a safety limit switch • Filter on the suction side of the pump (500 microns) • Foot switch for operating the cleaning pump • Interior lighting • Neoprene gloves, length 600 mm (chemical resistant) • Adjustable feet +/- 50 mm Optional: • Candle filter made of stainless steel with pump (10/25/50 microns) • External mini-pneumatic oil separator

Year of construction: 2026, condition: as good as new (ex-display), IMMEDIATELY AVAILABLE!!!! Manual cleaning is performed using special gloves in the front area. The effectiveness of the cleaning is ensured by a high-pressure pump and a special spray nozzle. In these devices, a temperature of up to 60 °C can be set for the cleaning fluid. The pressure can be adjusted from 1 to 80 bar. Fodpfx Ansf A D Nmsmspk Technical data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg, optional up to 150 kg Spray pressure: adjustable from 1-100 bar Tank volume: 75 liters / heating power 2 kW Standard version: • Blower gun inside • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel sheets above the tank • Top-opening flap with 2 handles and gloves • Window made of tempered glass • Door opening/closing system with support from gas springs • Monitoring of door opening by means of a safety limit switch • Filter on the suction side of the pump (500 microns) • Foot switch for operating the cleaning pump • Interior lighting • Neoprene gloves, length 600 mm (chemical resistant) • Adjustable feet +/- 50 mm Optional: • Candle filter made of stainless steel with pump (10/25/50 microns) • External mini-pneumatic oil separator

Year of construction: 2018, condition: refurbished (used), functionality: fully functional, workpiece weight (max.): 15 kg, inner dimension height: 95 mm, inner dimension length: 260 mm, negative pressure: 10,000 Pa, No minimum price – guaranteed sale to the highest bidder! Cleaning machine as a single-chamber flood system operating under full vacuum. The machine will undergo a complete overhaul in 2026 with an estimated value of €16,800 and is in very good condition. The original new price of the machine was €104,000. TECHNICAL DETAILS Cleaning medium: halogen-free hydrocarbon or modified alcohol Cleaning basket dimensions: 260 x 160 x 95 mm Batch weight max.: 15 kg MACHINE DETAILS Overall length: 1,260 mm Overall width: 1,110 mm Overall height: 2,600 mm Total weight: 1,600 kg EQUIPMENT Fjdpfx Aozh Eiqenmjpk CE marking in roll-on/roll-off standard version Complies with the 31st German Federal Immission Control Ordinance (BImSchV) (as of August 21, 2011) Complies with the Swiss Air Pollution Control Ordinance (as of March 1, 1998) Complies with the Austrian VAV Ordinance (as of July 26, 2022) Complies with the EU VOC Directive 199/13

Condition: ready for operation (used), Foresite C3 / C.I. Critical Cleanliness Control Tester Analytics Technology Year of manufacture: 2011 The C3 is unique among electronics cleanliness quality testers. It remains the only tester on the market that indicates whether a specific, critical area of a PCBA (Printed Circuit Board Assembly) is clean. Simply select the components and/or circuit areas most sensitive and vulnerable to contamination and/or reliability issues, and test a small area (0.1 in²). The C3 quickly provides feedback as to whether potentially detrimental residues, often caused by manufacturing processes, are present. Once the critical areas to be tested have been identified, the operator simply inserts a new disposable test cell into the vapor head and manually positions the head via the articulated arm over the test area. The weight of the arm and vapor head seals the test cell on the test surface. The operator then starts the automated testing sequence. Within 7-10 minutes, the operator knows whether the tested product area meets cleanliness standards. The C3 can be used directly in the production area. Fodpfx Anoxhcklomepk At the end of the test, the cell can be easily removed using the cell ejector on the head. The test sample in the cell, efficiently extracted from the small test area using steam, can undergo further analysis to identify specific contaminants and their concentrations. The entire test is simple and straightforward for the operator, with results not dependent on operator skill. The use of Pro-Site single-use test cells and extraction solution prevents cross-contamination of samples. You are welcome to arrange an inspection. We can also organize cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be provided, provided a valid VAT ID number is available. Subject to prior sale. Visit our shop and take a look at our other offerings as well. Brand names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Technical data deviations and errors in the description of the item may occur and are subject to change.

Year of construction: 1996, condition: used, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Used Complete System – Fully Operational – Inspection Possible During Production For sale is a complete and fully operational STEIMEL chip conveying and de-oiling system, which is currently still in use in serial production. The system has been used exclusively for conveying and de-oiling brass chips and is being sold solely due to the modernization of our production facilities. It is a continuous centrifugal de-oiling system. A major advantage for prospective buyers is that the system can be inspected while in operation before dismantling. Technical drawings and documentation are available. Dismantling is scheduled for October 2026. This system is ideally suited for companies in the machining and metalworking industry looking for a reliable and cost-effective solution for chip handling and the recovery of oil and coolant. Technical Data Manufacturer: STEIMEL Type: Continuous Centrifugal System, Type K50 Operating Principle: Centrifugal separation Year of Manufacture: 1996 Condition: Used, fully operational. The centrifuge drum (main component) was completely overhauled and has been back in operation since June 2026. Availability: Expected from October 2026 Location: 73630 Remshalden, Germany Processed Material: Brass chips (leaded and lead-free) Performance Capacity: 2,000 kg of de-oiled chips per 24-hour operation Residual moisture achieved: between 1.8% and 4%, depending on the chip type Residual moisture can be adjusted by: * centrifuge drum speed, or * chip elevator conveying speed * Simultaneous loading of up to 8 chip carts * Chip bunker capacity: approx. 800 litres Scope of Supply * Complete chip conveying system including centrifugal de-oiling unit * Oil reservoir not included Fodszhui Hopfx Anmjpk * Technical drawings and documentation included * EXW (Ex Works), loaded and ready for collection at our loading dock Key Features * System is currently still in production use * Inspection under real production conditions possible by appointment * Robust industrial design * Proven STEIMEL quality * Sale of the complete system preferred The system has been regularly maintained and remains fully operational until dismantling. Interested buyers are welcome to inspect the equipment on site and verify its performance and condition. Additional photos, technical documentation, and engineering drawings are available upon request.

Year of construction: 2008, condition: used, filling amount 180 l injection pressure 1,3 bar 700 l/min Fjdowgi Epepfx Anmepk diameter 800 mm voltage 400 V frequency 50 Hz dimensions ca. 1200x1300x1100 mm weight of the machine ca. 300 kg

Condition: refurbished (used), Year of construction: 2010, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 2.519, year of last overhaul: 2026, protection type (IP code): IP65, ejection height: 1,100 mm, nominal power: 4 kW (5.44 HP), operating pressure: 6 bar, operating temperature: 80 °C, working range: 950 mm, rotational speed (max.): 1 rpm, rotational speed (min.): 1 rpm, temperature: 80 °C, total height: 700 mm, compressed air connection: 6 bar, BvL cleaning system, Model Ocean RW 900 S. Fpodpfjzf Hm Sox Anmsk Optional features such as filter technology, etc., are still available.

Year of construction: 2023, condition: new, Spiral washer, used for cleaning small parts like bolts-nuts-screws etc. Fodpfefhb Icjx Anmopk Tunnel-type spiral washer, parts are loaded via vibrating table and transferred via spiral conveyor. Washing-rinsing-drying options are available Parts washer for small parts. Automatic washing machine, small parts washing, stamped parts washing machine, spiral washer, bolt washer, nuts washer, screw washer

Year of construction: 2023, operating hours: 1 h, condition: new, machine/vehicle number: MANUWASH3128, INTERSONIK Manuwash is perfect solution for manual parts washing. It is safe economic and user friendly. Manuwash can be manufactured with options and dimensions according to your requirements. Fpedpfx Aned Tg Nnjmjk Ideal for car repair shops and auto repair services. Please do not hesitate to contact with us for technical details. Please check the attached brochure for other details.

Year of construction: 2021, condition: new, Intersonik top loader rotary basket washers are a quick and economic solution to your parts washing needs. It is easy to use and nature friendly. Top loading mechanism makes the product easy for loading and unloading the washing basket. High-pressure water is sprayed via positioned nozzles during the washing cycle at the same time basket is rotated for even better washing quality. Technical details of the top loader spray washer is listed below: Nr. - Item - Details 1 - Machine dimensions - 850 x 850 x 1000 mm 2 - Loading height - 750 mm 3 - Loading capacity - 380 mm 4 - Stainless steel body - AISI 430 (1.5-2 mm) 5 - Pump power and number - 2.5 hp x 1 6 - Pump body - AISI 304 7 - Total heating power - 15 Kw 8 - Electricity - 380 V / 3 Phase 9 - Timer - 0-30 min 10 - Thermostat - 0-90 C 11 - Basket and nozzles - Galvanized coating 12 - Electrical components - ABB and Schneider or equivalent 13 - Pneumatic components - Mag and Festo or equivalent 14 - Oil skimmer - Available 15 - Drying fan - Optional Fedpfx Aehcimzenmepk 16 - Rinsing tank - Optional 17 - Ebara pump - Available 18 - Liquid level sensor - Optional 19 - Automatic liquid filling - Optional 20 - Mist exhaust fan - Optional

Year of construction: 2023, operating hours: 1 h, condition: new, Intersonik tunnel type automatic washing machine. You can wash crates, boxes, molds, lids etc. in a continuous and automatic washing machine. Ideal for food industry. Ideal for automotive industry. KLT washing, crate washing, plastic box washing machine, automatic washing machine, spray washing, tunnel washing For further info please contact with us. Fpjdpfx Aned Tnuasmjk

Condition: used, Year of construction: 2016, functionality: fully functional, working width: 600 mm, warranty duration: 12 months, input voltage: 400 V, total height: 1,250 mm, total width: 1,000 mm, total length: 1,080 mm, noise level: 65 dB, We offer Parts Washer PC 60/130 T for sale Catalogue number: 1.626-704.0 Year of manufacture: 2016 All devices purchased from us come with a 12-month WARRANTY. Equipment features: • Operating hours counter • Stainless steel safety grate • Swivel castors, 2 lockable • Timer switch • Water level control Fedpjwzwuzjfx Anmjpk Technical data: • Pressure: 1.5 / 0.15 bar / MPa • Pump performance: 4500 l/h • Connection power: 5.5 kW • Working diameter: 600 mm • Working height: 310 mm • Housing/frame: Stainless steel (1.4301) • CE certified • Heater power: 4.5 kW • Maximum temperature: 80°C • Adjustable wash time: 1 / 30 min • Load capacity: 130 kg • Sound pressure level: 65 dB(A) • Tank capacity: 100 l • Number of phases: 3 Ph • Frequency: 50 Hz • Voltage: 400 V • Dimensions (L x W x H): 1080 x 1000 x 1250 mm The washing process is fully automated, with easy operation ensured by a clear control panel and indicator lights displaying all working stages. The washing fluid temperature is maintained within the range of 35 to 80°C and is controlled via thermostat. Thanks to specially designed housing profiles (mechanical labyrinth seals), the PC 60/130 T operates without perishable rubber seals. Gas struts equipped with dampers guarantee effortless lid opening, while a ball valve enables easy draining of the cleaning fluid. The Kärcher parts washer operates in a closed-circuit system (using an electric pump) with a water-based cleaning solution instead of solvents, ensuring that the operator is not exposed to hazardous vapours.

Year of construction: 2020, operating hours: 6,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: VF353, The "CeBeCo®" TROWAMAT® XL is suitable for cleaning wash items whose contaminants can be removed by spraying with detergent under pressure. The inserted basket, filled with wash items, is evenly passed by the nozzles positioned above and below, via a carousel wheel. Additionally, the wash items are sprayed by a nozzle system in the door and at the rear of the unit. Thanks to the high spray pressure and low rotation speed, a consistent cleaning result is achieved. TECHNICAL DATA Type: "CeBeCo®" TROWAMAT "XL" Size 40100/40 WST Drawing No. 3314-20 Tank: Approx. 3 mm thick stainless steel sheet 1.4301 Insulation: 25 mm mineral wool / Terodem Cladding: 1 mm galvanized steel sheet Usable dimensions: approx. 400 mm x 1,000 mm x 400 mm (height) Load capacity: max. 100 kg, with evenly distributed load Fpjdoyr Dkcjpfx Anmjk Overall dimensions: approx. 2,700 mm x 1,825 mm x 2,530 mm (height) without roller conveyor Entry height: approx. 1240 mm Detergent: service water, aqueous, pH 7 - 11, max. +70°C, non-foaming, concentration max. 5% Detergent tank volume: approx. 460 L Rinse agent: aqueous, pH 7 - 11, max. +70°C, non-foaming, concentration max. 5% Rinse agent tank volume: approx. 240 L The offer includes roller conveyor and washing baskets. For further information, please contact us.

Year of construction: 2005, condition: used, Technical details: lifting capacity in kg: 230 kg Fpjdpfoyzhnlox Anmsk

Year of construction: 2016, condition: good (used), 1 used hot water parts cleaning system Manufacturer: Bio Circle Type: HTW II 800 Year of manufacture: 2016 Material: Stainless steel Electrically powered rotating basket Effective and cost-efficient Overall width: 1175 mm Overall depth: 1145 mm Height with closed lid: 1380 mm (with exhaust bend) Height with open lid: 1780 mm Inner diameter of the mesh basket: 800 mm Max. usable height: 400 mm Max. payload: 350 kg Tank capacity for cleaning fluid: 150 liters Electrical connection: 6 kW Fedpfx Aezb Iyajnmopk Voltage: 400 volts Frequency: 50 Hz Flow rate of the cleaning pump: 4.8 m³/h Spray pressure: 2.5 bar Electric heating in the washing tank: 5.3 kW Treatment temperature: 10°C to 85°C Load capacity: 150 kg Fresh water connection: 1/2″ Drain valve: 1 1/4″ Weight: 330 kg

Year of construction: 2017, condition: reconditioned (used), Hello, Fedpfx Anozcuxxjmepk we are offering two refurbished IBS washing machines, type MAXI 78 and MAXI 91-2. In addition, the pumps have been resealed on these machines. Inspection and collection in Einbeck. The soiled items to be cleaned are placed in the rotating washing basket, and the lid is closed. After setting the desired washing temperature and time, the machine is switched on, and the washing solution in the tank is heated. In the closed machine, the basket rotates at a constant speed around its own axis. The pump units draw the washing solution from the washing tank and pump it through 6 stainless steel nozzle pipes with overlapping flat spray nozzles. The items to be cleaned are blasted from all sides with the hot solution during the uniform rotation of the motor-driven basket. After the cleaning process is completed, the machine switches off automatically. Advantages: 2 pumps arranged horizontally 6 three-dimensional nozzle pipes made of stainless steel robust stainless steel design additional small parts cleaning basket made of stainless steel (diameter 170 mm) rotating washing basket made of stainless steel, V-belt drive via separate motor fume extraction stainless steel sieve plate with filter basket above the washing tank low water level protection adjustable feet

Year of construction: 2017, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: MAXI 91-2, The machine has been thoroughly inspected by IBS, and the pump has been newly sealed. Current pictures to follow. Easy operation thanks to a fully automatic cleaning process, allowing skilled personnel to focus on other important tasks. The wash tank is filled with a mixture of water and soluble IBS special cleaner (washing solution). Contaminated parts to be cleaned are placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and time, the device is switched on and the solution in the tank is heated. Inside the closed machine, the basket rotates at a constant speed around its own axis. The pump units draw the cleaning solution from the wash tank and distribute it via six stainless steel spray pipes with overlapping flat spray nozzles. The parts to be cleaned are intensely sprayed with the hot solution from all sides during the steady rotation of the motor-driven basket. Once the cleaning cycle is finished, the device shuts off automatically. Advantages - 2 pumps arranged horizontally - 6 three-dimensionally arranged stainless steel spray pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (diameter 170 mm) - Rotating stainless steel wash basket, V-belt drive with a separate motor - Steam extraction - Stainless steel perforated screen with filter basket above the wash tank - Low water level safety device - Individually height-adjustable feet Fpodpfsudz D Usx Anmok Technical Data Capacity of immersion tank/basket: 190 l Diameter of immersion tank/basket: 910 mm Load capacity: 200 kg (optional 300 kg) Temperature min. - max.: 0-60 °C Working height: 500 mm Dimensions (W x D x H): 1310 x 1160 / 1350 x 1285 / 2000 mm Weight: 150 kg Heating output: 6 kW Spray rate: 2 x 6,600 l/h Material: Stainless steel Electrical connection: 8 kW / 400 V / 50 Hz Pump pressure: 2.5 bar

Condition: like new (used), Year of construction: 2009, functionality: fully functional, temperature: 60 °C, Available immediately! Function Easy operation thanks to a fully automatic cleaning process, allowing professionals to focus on other important tasks. The wash tank is filled with a mixture of water and water-soluble IBS special cleaner (washing solution). The contaminated items are placed in the rotating washing basket, and the lid is closed. After setting the desired washing temperature and time, the unit is switched on and the solution in the tank is heated. Inside the closed unit, the basket rotates at a constant speed around its own axis. The pump units draw the washing solution from the tank and distribute it through 6 stainless steel jet pipes with overlapping flat spray nozzles. The items are intensively sprayed from all sides with the hot solution due to the uniform rotation of the motor-driven basket. Once the cleaning process is complete, the unit shuts off automatically. Advantages - 2 horizontally mounted pumps - 6 three-dimensional stainless steel jet pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (Ø 170 mm) - Rotating stainless steel wash basket, V-belt drive via separate motor - Steam extraction - Stainless steel sieve plate with filter basket above the wash tank - Suction filter in front of the pump chamber - Water shortage safety feature - Individually height-adjustable feet Technical Data Capacity dipping tank / basket: 280 l Diameter dipping tank / basket: 1150 mm Load capacity: 350 kg / optional 500 kg Temperature min. - max.: 0-60 °C Working height: 700 mm Fjdex Izwmopfx Anmjpk Dimensions (W x D x H): 1570 x 1510 / 1830 x 1495 / 2175 mm Weight: 250 kg Heating power: 10 kW Spray amount: 2x10800 l/h Pump pressure: 2.3 bar Material: Stainless steel Electrical connection: 13.5 kW / 400 V / 50 Hz / 32 A

Year of construction: 2026, condition: new, functionality: fully functional, Function Easy handling thanks to fully automatic cleaning process. This allows professionals to focus on other important tasks. The wash tank is filled with a mixture of water and water-soluble IBS-Special Cleaner WAS (washing lye). The soiled parts are placed in the rotatable washing basket and the lid is closed. After setting the desired wash temperature and time, the device is switched on and the lye is being heated in the tank. In the closed device, the basket rotates at constant speed around its own axis. The pump aggregate draws the lye from the washing tank and transports it through 3 stainless steel nozzle tubes with overlapping flat jet nozzles. Advantage The soiled parts are radiated intensively with the hot lye from all sides in the rotating basket, driven by geared motor. After completing the cleaning process, the device switches off automatically. 1 pump arranged horizontally Specific output: 120 L/min 3 three-dimensional stainless-steel nozzle tubes robust stainless-steel design additional small parts cleaning basket made of stainless steel (Ø 170 mm) rotating washing basket made of stainless steel, driven by geared motor steam extraction screen plate with filter inlets made of stainless steel above the wash tank water indicator longer nozzle tube above and below 9 nozzles more than Mini 60 Fpodpehct Eaofx Anmjk Technical data Tank capacity 80 l Basket diameter 600 mm Capacity 100 kg Temperature min. - max. 0-60 °C Dimensions (W x D x H) 945 x 830 x 1025 / 1640 mm Weight 60 kg Spray rate 7200 l/h Material Stainless steel Power supply 3,9 kW / 400 V / 50 HZ Nutzhöhe 380 mm Pumpendruck 2,4 bar