Spiral Tunnel Type Parts Washer

INTERSONIK HELIWASH

Condition: new, Year of construction: 2024, Helical washer, spiral tunnel for small parts like bolts, screws, joint and small metal parts. Industrial parts washer for mass production, ideal solution for chip and oil removal. Perfect parts washing systems for degreasing and precise cleaning. Operation Principles: Work pieces are washed rinsed and dried with detergent and pressurized hot water spray in helical conveyor tunnel. Application Areas: -Machined parts like rivets, nuts, bolts, screw etc. -Textile accessories as zip, button, snap, fastener etc. -Fittings and equipments for gas regulators, hot water pipes lines, natural gasline etc. -Sanitary Industry; fittings and armature Processes: -Spray wash -Spray rinsing -Drying Hsdped I E Irefx Aa Esnp All of the HELIWASHes are tailor-made and have lots of options according to your needs. Please feel free to contact us for technical details.

Condition: like new (used), Manufacturer: Varian Hodpfx Ashmba Aja Eenp Type: NHS-35 Condition: The pump is in very good condition and can also be supplied with a corner valve if required. Warranty: 3 months Delivery time: In stock

Year of construction: 2019, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: MISCO1082, Oil Mist Collecting and Regaining. MISCO is used for collecting and getting rid off the oil in the CNC machines cabin. It is a water vapor, aerosol, smoke, oil mist filtering / separating device. Also allows condensing and recycling the condensed liqud back to the sump The particulate-smoke-gas-water in the air sucked in is filtered through the vapor separation units. The saturated oil-water etc. contained in the air is also separated and recovered, and the air is cleaned by 98% of the dry air. Removal of parts washing machines vapor-mist, Welding fumes, Oily air off CNC machines In the industry and even In the industrial kitchens a lot of oil mist, various gases, fumes and dusts are mixed into the air and create a risk of fire. In addition, they are inhaled by workers and cause damage especially to the lungs, respiratory tracts and other vital organs. For this reason, harmful substances such as gas, dust, smoke and similar substances must be cleaned by absorbing harmful substances in terms of safety and health. Application Areas: CNC Machines Welding fumes, Allows removal of oil vapor and recovery of existing fluid in CNC machines Automotive - Metal Processing – Food Industry - Industrial Kitchens - Steel - Casting - Chemical Industries etc. Working Principle; 1-Entry of dirty smoke –vapor- mist 2- Condensation with laminar flow over the walls 3- Disintegration of the particles passing through the filter 4-Recycling of condensing liquid 5-Dry and clean air evacuation For detailed information please contact us. Hnedpfx Ajd Nwk Usa Eop mistcollector, cnc cutting oil, fume removal, cutting oil fume collector

Condition: used, Year of construction: 1987, Technical details: number of spindles: 8 spindle passage: 51 mm Hsdpfjiay Sfjx Aa Eenp Article: multi spindle automatic lathe Manufacturer: Schütte Type: AF51 Yob: 1987 eight main spindles max. bar diameter D=51mm control SIEMENS SIMATIC S5 pick up in pos. 7, for rear machining thread cutting drive independent feed in positions 2/3 electronical trip dog control “Balluff” clear text display Wöhrle coolant pump magnetic cartridge filter oil running incl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type) Painting in light blue and light grey The configuration of tooling will be different like pictures. Please, contact us for getting more information and pictures on mail(at) or *

Condition: like new (used), Year of construction: 2022, OEM – laser marker / engraving laser (diode pumped YAG-laser) The laser beam source was used for some time to generate plasma as part of a scientific project. Overall, however, it only has few operation time. Due to the short pulse length, this laser is also very suitable as an engraving laser Hnedpfxspyg N Ae Aa Esp Laser source of the complete system is a 10 Watt diode-pumped YAG-laser with 1064 nm wavelength. The working area is 100 x 100 mm, up to 300 x 300 mm is available as an option. No external cooling is necessary. Input-voltage: 110...240 VAC / 50 Hz. Applications are laser engraving and material ablation. The control software is installed on a PC, optionally also a Laptop can be used. The language of the software can be choosen (German, English). The laser is prepared for an integration into a ‘higher level system’, but can also be used as a 'stand alone' system. In this case interfaces for Interlock, emergency stop, laser control etc. are available. We are happy to support the customer according to his requirements.

Year of construction: 2022, condition: as good as new (ex-display), Aluminum angled conveyor incl. mobile substructure horizontal area 1,100mm Rising area 1,500mm Pitch angle in bend 60° Total conveyor length: 1,750mm Discharge height: approx. 1,600mm Height of the horizontal: 300mm (feed height) Conveyor belt width 500mm PU conveyor belt including driver and corrugated edge petrol matt Drive: motor 0.25KW, speed 0.2m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 4x freely steerable transport rollers with parking brake 2 pcs. corrugated edges 50x35mm 11 pieces T-50 studs welded on in the middle - 481mm pitch Hnjdpfx Aasi Igikj Eep 2-layer particularly laterally stable Usable width 290mm, results as follows: Transverse arrangement -70+30-5+290-5+30-70mm

Condition: new, saw blade diameter 300 mm capacity 90 degrees: round 102 mm capacity 90 degrees: square 90 mm capacity 90 degrees: flat 120x80 mm capacity 45 degrees: round 90/80 mm capacity 45 degrees: square 80/70 mm capacity 60 degrees: flat 90x70/85x70 mm total power requirement 1,5/2,0 kW weight of the machine ca. 0,135 t dimensions of the machine ca. 0,5 x 1,05 x 1,0 m The versatile professional metal circular saw. Convincing in performance and price. · For miter cuts left up to 45° · For sawing steel, stainless steel and, to a limited extent, aluminum profiles · Spindle vice with double clamping arm for low-burr cuts · Cone safety clutch to protect the saw blades. · 2 speeds 33 + 66 rpm · Automatic cooling directly on the saw blade · Double bearing for saw head · 24 V safety switch in the handle with restart lock · Length stop, assembly tool · Closed cast, solid cast superstructures Hnodpfx Asfg Rlaea Eop · Miter adjustment on operator side machine base (option) ATTENTION: Price is without saw blade!!! (saw blade price EUR 93 / EUR 123)

Condition: new, weight max. in kg 1200 kg fork length 1150 mm stroke height min 85, max 190 mm 160 mm length in width 550 mm number of wheels 4 vorne, 2hinten tire equipment 80 x 70mm PU tandem fork arm (length x width x thickness) 1150 x 160 x 45 mm turning radius 1452 mm battery 48V / 20Ah weight of the machine ca. 0,140 t dimensions 1,65 x 0,55 x 1,2 m Hsdpfx Aofgyhnsa Esnp SPECIAL PRICE!!! - Battery charging time only 3 hours - Electrically lift and move - Use up to 6 hours - Easy to maneuver due to its low weight - Powerful lithium battery Driving speed - 4.5 km/h without load - with load 4.0 km/h

Year of construction: 2008, condition: excellent (used), Screw pump Manufacturer: Busch Type: Cobra DS 600 E Condition: very good Hjdpfsd Rafbjx Aa Eenp Delivery time: available from stock

Year of construction: 2005, condition: ready for operation (used), Tank capacity: 775l, max. batch weight: 100kg, heating capacity: 26kW, max. temperature: 75°C, basket dimensions X/Y/Z: 660mm/480mm/338mm, fine filtration tank 1/2: 100µm/50µm. Machine dimensions X/Y/Z: approx. 1850mm/1400mm/1800mm, weight: approx. 950kg. The machine was overhauled in 2024 and has not been used since. Including basket rotation with swivel drive, automatic water filling and oil separation with coalescence separation unit and oil collection container. Documentation available. On-site inspection is possible. Hnsdpfewr Dxhex Aa Ejp