Condition: new, Year of construction: 2026, Rehnen Varioflex Shelf Cart Flexible paint drying cart Sturdy tubular frame construction 17 shelves Extendable and lockable from 200 to 2000 mm 4 polyamide swivel casters Knedpfxobumtie Apmoa Load capacity: 400 kg Support tubes are galvanized Optional: Additional crossbars Length: 200 - 2000 mm Depth: 870 - 1180 mm Height: 1980 mm Support tube length: 650 mm Extended to: 1150 mm Clear space between tubes: 60 mm Load capacity: 400 kg Immediately available The cart can also be shipped within Germany for 75.00 euros (net).

Condition: as good as new (ex-display), Year of construction: 2026, The outstanding advantages: Space-saving, compact design – comfortable and powerful. Excellent surface quality and pleasant working environment thanks to diagonal, low-turbulence airflow. Large capture area thanks to air deflectors – also suitable for larger workpieces. Separation rate of paint mist up to 99%, pre-filter retention capacity up to 18 kg/m² – resulting in a long filter life! Easy and quick filter change on the front. Cost-effective replacement filters. Low purchase costs and extremely low energy consumption. Knodpfx Aecnz Iqjpmea Dry spray wall made of galvanized steel sheet with welded base frame, cardboard labyrinth filter as a pre-filter, and fiberglass filter as a secondary filter. Ex-fan incl. throttle valve mounted on the left. Don't compromise on surface quality. Easy Paint extraction walls are the ideal, cost-effective solution for effectively capturing and filtering paint mist and extracting solvent vapors. Robust and powerful, yet economical in consumption. The IPE dual filtration system ensures that two filter stages provide a maximum separation rate of up to 99%. The cardboard labyrinth filter initially absorbs significantly more overspray (up to 18 kg/m² filter area) than conventional filter mats, thanks to its folded filter pockets. The subsequent fiberglass secondary filter only absorbs the finest residual particles. As a guideline, a service life of approximately 150 to 200 painting hours can be specified for the cardboard labyrinth filter, depending on the paint used. The fiberglass filter only needs to be replaced after approximately 900 to 1200 painting hours, i.e. only every 5th or 6th cardboard filter change. Easy Paint also has a lower intake opening to quickly and safely capture solvent vapors at the floor level or from floor pits. Thanks to this additional intake opening at the bottom, the Easy Paint can be connected to a floor pit or drip tray as an underfloor extraction system. The filter cassette, which can be inserted from the front, also makes filter changes easier. Standard extraction capacity Easy Paint 3500 Item No. 600025 Airflow rate with standard delivery * 3500 m³/h Primary filter area 2.5 m² Secondary filter area 2.0 m² Motor power 400V/50Hz 1.1 kW ex Connection fitting for extraction hose D = 300 mm Width in mm 2750 Total height in mm 1455 Depth in mm with capture area 855 Weight in kg 145 Location: In stock at Bitburg Exhibition machine at a special price.

Condition: new, Year of construction: 2026, Pneumatic double-diaphragm pump Cobra 40 -10 Its unique design enables operation with minimal pulsation. Consistent paint flow for a perfect spray pattern and the highest surface quality. Ideally suited for processing materials that are sensitive to shear and moisture. Minimal shear forces – ideal for processing, e.g., UV coatings. Ideal for processing small quantities of material and for frequent color changes. Scope of delivery: Basic unit on a stand, HD double hose 7.5m, upper container 5l Ex, AirCoat pistol AC 4600 Professional including red air cap and holder, Air Coat nozzle ACF 3000 11/40. Technical data: Transmission ratio: 40:1 Volume flow per double stroke: 10 cm3 Volume flow at 200 double strokes: 2 l/min Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg Knsdsbuqn Hopfx Apmea Available at a special price – immediately available.

Condition: new, Year of construction: 2024, Binks Raptor Lite Air Combi Spray System The Binks Raptor Lite on a tripod combines the NEW Binks stainless steel pump MX 4/32 with the NEW Binks AirCombi spray gun AA440C. This guarantees pulsation-free paint supply and perfect surface quality. The Raptor Lite is the affordable and robust complete solution for a wide range of craft and industrial applications. Typical application areas: - Furniture and wood industry - Aerospace - Off-road Kjdpfx Apobu Dziemena - Metalworking - Truck trailer and semi-trailer manufacturers - And many others.... Suitable for the following materials: - Wood stains, paints and varnishes - Primers, sealants and undercoats - Solvent-based and water-based paints - Polyurethane - And many others.... 32:1 AirCombi Spray Package - 5-year pump warranty - Patented magnetic switch for quick, pulsation-free stroke change - All material-carrying parts made of stainless steel - AirCombi spray gun with the latest atomization technology - Modular design for reduced maintenance and low downtime - Fixed, spring-loaded seals - Large sight glass for release agents - Manufactured according to ISO 9001, CE and ATEX certified Raptor Lite Pump Specifications: - MX4/32 - Gear ratio 32:1 - Material flow max. 4 l/min, - Operating pressure max. 256 bar

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Ratio: 32 / 1 Package with filter Compressed air manometer Good condition Location: in stock at 54634 Bitburg - immediately available - Kedpfx Aoy A Tpqspmena

Condition: as good as new (ex-display), Year of construction: 2026, The compelling advantages: Space-saving, compact design – comfortable and high-performance. Knjdedqc U Hspfx Apmsa Excellent surface quality and pleasant working environment thanks to diagonal, low-turbulence airflow. Large capture area due to air guide plates – making it suitable for larger workpieces. Separation rate of paint mist up to 99%, retention capacity of the pre-filter up to 18 kg/m² – resulting in a long filter life! Easy and quick filter replacement on the front. Cost-effective replacement filters. Low purchase costs and extremely low energy consumption. Dry spray booth made of galvanized sheet steel with a welded base frame, cardboard labyrinth filter as a pre-filter, and fiberglass filter as a secondary filter. Ex-fan including throttle valve mounted on the left. Don't compromise on surface quality. Easy Paint extraction walls are the ideal, cost-effective solution for effectively capturing and filtering paint mist and extracting solvent vapors. Robust and powerful, yet economical in operation. The IPE double filtration system ensures that two filter stages provide a maximum separation rate of up to 99%. The cardboard labyrinth filter initially absorbs significantly more overspray (up to 18 kg/m² of filter area) due to the folded filter pockets than conventional filter mats. The downstream fiberglass secondary filter only captures the finest remaining particles. As a guideline, a service life of approximately 150 to 200 painting hours can be specified for the cardboard labyrinth filter, depending on the paint used. The fiberglass filter only needs to be replaced after approximately 900 to 1200 painting hours, i.e. only after every 5th or 6th cardboard filter change. Easy Paint also has a lower intake opening to quickly and safely capture solvent vapors on the floor or from floor pits. Due to this additional intake opening facing downwards, the Easy Paint can be connected to a floor pit or drip tray as an underfloor extraction system. The filter cassette, which can be inserted from the front, also simplifies filter replacement here. Standard extraction capacity Easy Paint 7000 Article number 600027 Air flow rate with standard delivery * 7000 m³/h Primary filter area 3.7 m² Secondary filter area 3.0 m² Motor power 400V/50Hz 2.5 kW ex 2-pole Connection nozzle extraction hose D = 355 mm Width in mm 2845 Overall height in mm 1955 Depth in mm with capture area 1015 Weight in kg 180 Location: In stock in Bitburg Exhibition machine at a special price.

Condition: new, Year of construction: 2024, Advantages - Compact design, space-saving - Powerful, high extraction capacity, low operating costs - Easy to maintain, long filter life - Universally applicable, variable accessories - High flexibility - Mobile design - Extraction technology with front plate system Technical data: Knodobpg E Ejpfx Apmsa Motor rated power: 0.75 kW / 2.1 kW Motor speed: 960 / 1430 rpm Airflow: 6,800 m³/h Filter area: 2 m² (2 x 1 m) Connection diameter 300 mm with throttle valve Dimensions (W / H / D) in mm: 2971 x 1405 x 1215 Weight: 248 kg

Condition: new, Year of construction: 2025, AL-KO Colour Jet 1 Paint Mist Extraction System Paint mist extraction system, ready for operation, with a 1 m² filter area including a pre-filter and a fine filter. Connection diameter: 300 mm, motor: 1.5 kW (suitable for installation in Zone 22 according to ATEX), switch: 1-stage, plus a 5 m cable with plug and throttle valve. Compact, space-saving steel sheet construction. Chassis with wheels. Indirect extraction near the floor. Completely pre-assembled. With connection cable and phase reversal device. Adjustable side panels. Optimized spray mist extraction through a patented front panel hood. Long filter life. Knodpfjbumr Ssx Apmsa High-performance fans with low noise levels. Filter wall with special mats. Exhaust nozzle with integrated throttle valve. Motor power: 1.5 kW Speed: 1400 rpm Nominal volume flow: 4600 m³/h Pressure: 500 Pa Dimensions (W*H*D): 1025*1437*1214 mm (W = 2000 mm with side panels) Filter area: 1 m² Weight: 175 kg

Condition: new, Year of construction: 2026, Variable adjustable painting turntable • Numerous adjustment options for small and large, solid workpieces • Stable • Can be operated by one person, rotatable with rigid outriggers and adjustable swivel arms Knodjbzmafepfx Apmoa • Height-adjustable Technical data: Length: max. 1850 mm Width: max. 800 mm Height: 1000 – 1300 mm Load capacity: 300 kg Location: Available from stock in Bitburg Top-quality product at a top price Can be shipped by us via UPS – assembly required.

Condition: excellent (used), Year of construction: 2014, Binks Raptor Lite AirCombi Spray Unit The Binks Raptor Lite on tripod combines the NEW Binks MX 4/32 stainless steel pump with the NEW Binks AirCombi spray gun AA4400M. This guarantees pulsation-free paint supply and perfect surface quality. Raptor Lite is the affordable and robust complete solution for a wide range of craft and industrial applications. Typical fields of application: - Furniture and wood industry - Aerospace - Off-road - Metal processing - Truck trailer and semi-trailer manufacturing - And many more… Suitable for the following materials: - Wood stains, paints and glazes Knjdpey A Ni Tsfx Apmja - Primers, sealants, and undercoats - Solvent-based and water-based paints - Polyurethane - And many others… 32:1 AirCombi Spray Package - Patented magnetic shift for rapid, pulsation-free stroke changeover - All wetted parts made from stainless steel - AirCombi spray gun with the latest atomization technology - Modular design for reduced maintenance effort and minimal downtime - Fixed, spring-preloaded packings - Large sight glass for separating agents - Manufactured according to ISO 9001, CE and ATEX certified Raptor Lite Pump Specifications: - MX4/32 – ratio 32:1 - Maximum material flow: 4 l/min - Maximum operating pressure: 256 bar Location: in stock, 54634 Bitburg - Available immediately -

Condition: ready for operation (used), Year of construction: 1995, Schuko spray booth wall with supply air unit + supply air ceiling Kedexvivqspfx Apmona Offered at a special price, but must be dismantled by the buyer Technical data: see photos Location: ex-site Saarland

Condition: new, Year of construction: 2026, Type designation and technical data The outstanding advantages: Space-saving compact design – comfortable and high-performance. Excellent surface quality and pleasant working environment thanks to diagonal, low-turbulence airflow. Large capture area thanks to air guide plates – also suitable for larger workpieces. Separation rate for paint mist up to 99%, retention capacity of the pre-filter up to 18 kg/m² – resulting in a long filter life! Simple and quick filter change on the front side. Cost-effective replacement filters. Low initial costs and extremely low energy consumption. Dry spray booth made of galvanized sheet steel with a welded base frame, cardboard labyrinth filter as a pre-filter, and fiberglass filter as a post-filter unit. Ex-fan including throttle valve mounted on the left side. Do not compromise on the quality of the surface finish. Easy Paint extraction walls are the ideal, cost-effective solution for the effective capture and filtration of paint mist and the extraction of solvent vapors. Robust and high-performance, yet economical in consumption. Standard extraction capacity Easy Paint 3500 Article No. 600025 Airflow rate in standard configuration * 3500 m³/h Primary filter area 2.5 m² Secondary filter area 2.0 m² Motor power 400V/50Hz 1.1 kW Connection for extraction pipe D = 300 mm Width in mm 2750 Overall height in mm 1455 Depth in mm with capture area 855 Knjdpfjb R D U Sex Apmja Weight in kg 145 Location: In stock at Bitburg Exhibition machine available at a special price.

Condition: excellent (used), Year of construction: 2016, I sell the 2-head roller coating machine for surface finishing at parquet production Cefla Sorbini Smart Parquett MRF/300. Year 2016. Configuration: 2-head roller coater Oil type: Oxidativ, UV, Let Oil load : 4 – 30 gr/m2 + brand new unused vacuum pump +2 pcs. new rubber cylinder +1 pc. new feeding band Ksdpszn Axcefx Apmsna Working width: 300mm Total length: 2,30m Total width: 1,30m Weight: 960kg Available immediately. Fully working. Still in production. Possible to run and test. Documentation and CE included.

Condition: used, The convenient Varioflex shelving trolley is designed for flexible and gentle unloading of painted workpieces. In addition, they enable its 4 swivel castors also facilitate the transport of the Workpieces. Its sturdy tubular frame construction can be Adjustable from 200 to 2000 mm. With 17 inner and 17 outer support tubes each per side, the trolley can carry loads of up to 400 kg at to support an evenly distributed load. The plug-in inner and outer support tubes allow can be removed if required and can be fitted at the rear be reused. When not in use, the shelving trolley can be stored to save space Put together. Optional accessories – Plastic-coated support tubes – Additional rakes Technical specifications: Length: 200–2,000 mm Depth: 870–1,180 mm Height: 1855 mm Support tube length: 650 mm – extended to: 1,150 mm Knedpezk Npaefx Apmoa Clearance between pipes: 70 mm Load capacity: 400 kg Availability: at short notice Storage location: Röllbach

Condition: excellent (used), functionality: fully functional, ELMAG SER-FC-CS45 painting line for joinery 1. Automatic transport system with: Knsdpfszk Epcjx Apmja – Trolleys: 40 units – Max. permissible total weight: 6000 kg – Trolley length: 3000 mm – Feeding system: automatic – Trolley rotation: automatic 2. Painting booth: – Dimensions: 4080 x 2000 x 4000 – Power: 4 kW – Flow rate: 14,000 m3/h 3. Flow coating system: – Length: 4000 mm – Valve height: 4500 mm – Usable working height: 2500 mm – Pump flow rate: 500 l/min – Valve construction: stainless steel – Capacity of the paint valve: 200 l 4. Drying chamber: – Dimensions: 13,000 x 2900 x 4100 5. Air purification system (inlet + recirculation filters): – Air flow: 7000 m3/h – Painting line compressor – Air purification system (inlet and recirculation filters) Air flow: 15,000 m3/h – Thermal power: 110,000 kcal/h

Condition: used, Year of construction: 2016, Used Makor START ONE spray coating machine suitable for low-volume woodworking production. Designed for applying water-based or solvent-based paints and glues to veneered components and PVC panels. Ideal for companies moving from manual finishing to automatic spray coating. Equipped with PLC control system with intuitive interface and automatic panel detection to optimise paint usage. Features a self-cleaning paper transport system, reducing maintenance and downtime. Knedpfx Apox Iggyomsa Spraying unit includes an electronically controlled oscillating arm with capacity for up to 4 spray guns, 2 high-pressure feed circuits, and quick-change coupling system. Efficient air-flow and filtration system ensures clean operation and environmental compliance. Technical Data: • Feed speed: 1–4.5 m/min • Air capacity: 10,000 m³/h • Installed power: 7 kW • Working height: approx. 900 mm

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, working width: 250 mm, Coating machine / brush applicator Manufacturer: Ceetec Type: A 250 Ksdpfx Apoyuaptemona Automatic coating machine with brush application Workpiece dimensions: Width max. 250 mm Height max. approx. 100 mm Length from approx. 800 mm The coating machine is suitable for applying paints, wood preservatives, as well as oils and waxes (e.g., for exterior cladding, decking boards, etc.) Technical data: - electronic diaphragm pump (no compressed air required) - spray nozzles for all-round application of wood preservatives - 12 rotating applicator brushes on 8 axes (standard nylon bristles) for 4-sided application of coating materials Workpiece feed adjustable via feed roller, approx. 16-45 m/min. Capacity approx. 960 – 2500 meters/hour Power connection 3 × 380 V EU Machine weight approx. 350 kg The machine has been cleaned and technically inspected. Hose connections, diaphragm, and brush set have been renewed. Ready for immediate use!

Condition: excellent (used), Year of construction: 2022, operating hours: 326 h, functionality: fully functional, machine/vehicle number: A20221005, feed length X-axis: 5,500 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 100 mm, workpiece weight (max.): 500 kg, working width: 1,300 mm, No minimum price – guaranteed sale to the highest bidder! Auction of a fully automatic coating system consisting of the following components: VEN SPRAY SMART spraying system VEN MOVE TRANSFER VEN TRANS BELT (x3) VEN TRANS BELT with dust protection hood VEN MOVE TRANSFER with drying chamber Air supply unit HC12 The system was installed in 2022 and was in operation for approximately 1 year (326 operating hours in pistol drive). TECHNICAL DETAILS VEN SPRAY SMART spraying system (year of manufacture: 2019) Feed speed: 1.5-4.0 m/min Working speed: 2.0 m/min Working height: 920±20 mm Working width: 1,300 mm Min. workpiece size: 300 x 100 x 10 mm Max. workpiece size: 3,600 x 1,200 x 50 mm Coating material: water-based paints, solvent-based paints Spraying process: Air, Airmix, Airless 326 operating hours VEN MOVE TRANSFER 180° (year of manufacture: 2022) Length: approx. 6000 mm Width: approx. 8,078 mm Speed: 3.2 m/min Max. load: 20 kg/m 766 operating hours 3x VEN TRANS BELT belt conveyor (year of manufacture: 2022) Length: approx. 5,635 mm Outer width: approx. 1,511 mm Working width: approx. 1,300 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m 766 operating hours VEN TRANS BELT with dust protection hood (year of manufacture: 2022) Length: approx. 3,800 mm Working width: approx. 1,300 mm Working height: 920±20 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m VEN MOVE TRANSFER with drying chamber (year of manufacture: 2022) Length: approx. 6,000 mm Width: approx. 8,078 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m Drying chamber manufacturer: Adolph & Co GmbH Min. exhaust air volume: 1,200 m³/h Operating hours (see image) Belt: 766 h Ventilation: 1,620 h Pistol drive: 326 h EQUIPMENT Fully automatic coating process Multi-layer coating programmable Automatic control of the entire coating process Kjdpfx Apjzlxilemjna 6 freely programmable spray guns Suitable for water-based and solvent-based paints Suitable for automated coating processes in industrial applications

Condition: excellent (used), Year of construction: 2014, Roller coater BÜRKLE easy coater RCL 12M and UV system easy cure UV - TRUV with 2 lamps and 2 x roller conveyor BÜRKLE easy coater RCL 1300: For one-sided application on flat surfaces from above Operating side left Touch screen control TP 177 Micro Rubberized application roller Hard chrome-plated metering roller can be sensitively adjusted via worm gearbox Knjdpfx Apet Dx U Ssmoa Controlled belt transport with exposed counter roller for safe workpiece transport Quick-change system with split bearing and cross-disc coupling for easy changing of the application roller Oscillating squeegee, can be changed quickly for cleaning Separate, infinitely variable FU direct drives for application roller, metering roller and transport Reversible dosing roller Motors and limit switches in Ex version on the machine Non-Ex control cabinet and control panel outside the danger zone on the machine Mobile version Electrical preparation for integrating the roller coating machine into a coating line Technical data Working width: 1300 mm Workpiece height 3 - 80 mm Min. workpiece length 400 mm Rubberized application roller DM 240 mm Chrome-plated metering roller DM 172 mm Transport speed 2 - 15 m/min variable Connected load approx. 2.4 kW Speed of metering roller 1.0 - 3.0 m/min Working height 900 mm (+/- 20) Safety equipment according to CE Incl. switch cabinet Weight approx. 1650 kg UV system e.a.s.y. cure UV - TRUV with 2 lamps One-sided curing of UV-curing lacquers on flat workpieces from above Incl. control cabinet Working width max 1300 mm Workpiece height max 80 mm Number of lamps 2 # - changed 10/2023 UV lamp power 120 W/cm² each Speed 2 - 15 m/min variable Transport: Transport carpet Exhaust air connection 2 x 250 mm Connected load 39 kW Weight approx. 750 kg 2 x roller conveyor RB 1300 Working width 1300 mm length 4000 mm Speed 2 - 15 m/min variable Connected load 2 x 0.37 kW Total system length 12450 mm

Condition: new, The AL-KO COLOUR JET paint mist extractor is used to extract toxic mist in the workshop. The AL-KO COLOUR JET is therefore ideal for paint extraction in timber-processing operations, in carpenters' and joiners' workshops and in the craft sector in general. The AL-KO COLOUR JET is a fold-out paint mist extraction system. Kjdpfohby Riex Apmsna It is delivered as a plug-in paint mist extraction system. Motor 0,75 / 2,1 kW ex/ 400 V / 50 Hz Fan speed 960 / 1.430 RPM capacity 3.000 / 6.800 m3/h dimensions (B/ W/ T) 1.912 x 1.405 x 943 mm with attached side panels 2.971 x 1.405 x 1.215 mm filter area 2 m2 noice level 72,0 dB(A) weight 248 kg

Condition: good (used), Year of construction: 2003, 2 units of Giardina painting systems Year of manufacture from 2003 to 2009 Roller coating machine UV dryer 1 UV dryer 2 Kjdpfxszlq Uts Apmena Roller coating machine, type G95/05 Baby, with GST UV dryer with 2 irradiation units UV dryer GST 1400/2

Condition: used, Year of construction: 2009, Colour: White - Details: - └ Description: Exclusive Makor - Year: 2009 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: MKR30029343 - Rail present: No Financial information VAT: The price shown is exclusive of VAT Ksdpfxownh I Eo Apmsna VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level at 3 m distance from the intake point: 55 dB(A) -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Technical data: W x H x D = 4,000 x 1,000 x 400 mm -FLOOR SUCTION DUCT for drying area Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Technical data: Manufacturer: LBH Type: VGM-071-0450-K Air volume: 10,000 m³/h Motor power: 4.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. Knsdpfx Aezlktpepmsa The technology: in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR

Condition: used, Gun cleaning device MARX PWA 900 -used- Knsdpfxju R Tfae Apmea Housing parts made of stainless steel, timer, fresh spray nozzle ----- Technical data ----- Dimensions (LxWxH): 670 x 510 x 370 mm, Compressed air: 6 bar

Condition: used, Year of construction: 2008, Infrared dryer, consisting of: Module 1: - 3 IRM lamps with a power of 3500 watts/lamp Ksdpfx Aswub Uxjpmena - Structure made of painted sheet metal. - Installed electrical power 10.5 kW Module 2: - 2 IRM lamps with a power output of 3,500 watts/lamp - Structure made of painted sheet metal. - Installed electrical power 7.0 kWTotal connection approx. 19.5 kW/400 V/50 HzExhaust air: - Exhaust air fan approx. 1,800 m³/h - Supply air/room air approx. 1,800 m³/h - Extraction nozzle D160mm ROLLER CONVEYOR - Celfa - Year of manufacture 2008 - Steel rollers with heat protection tape wrapped around - Roller spacing 160 mm - Feed via hand wheel adjustment - Installation length 2,000 mm - Feed approx. 3 - 7.5 m/min. - Including control cabinet - 400V/50Hz