Used Aks for sale (335)

Year of construction: 2006, condition: used, Saw blade diameter (vertical): 550 mm Saw blade diameter (horizontal): 500 mm Max. profile height: 250 mm Max. feed rate: 830 mm Digital angle displays for material stop and tilting of both saw units Pneumatic material clamps Giodpoyybr Uefx Acwer Minimum quantity spray device Hydropneumatic saw blade feed via 2-hand operation Weight: 1,000 kg

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1340020158, Variable notching possibilities for mullion and transom combinations, e.g. for curtain walls, conservatories, sky lights, and special designs Precise and safe notching is ensured because the workpiece is fixed and only the saw units move Both saw units are adjusted in height simultaneously by means of a hand wheel (analogue display on the hand wheel) The cutting depth is set using an analogue display Manual angle adjustment of the saw blades using a digital display of the tilting angles Support table with compound slide and pivoting back fence is manually adjustable for optimal use of the cutting range The angle of the pivoting back fence is shown on a digital display Horizontal and vertical profile clamping Automatic working cycle at a 90° pivoting angle (two-hand control when cutting special angles) Hydro-pneumatic saw feed Lower saw unit (vertical): Saw blade diameter 550 mm Tilting range from 45° forwards to 60° towards the rear Max. cutting height of 210 mm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW with motor brake Gsdpfx Acsyfhvpowjir Saw blade speed 2,800 rpm Manual tilting angle adjustment with digital display Upper saw unit (horizontal): Saw blade diameter 500 mm Tilting range from 55° downwards up to 60° upwards Notching depth, max. 190 mm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW with motor brake Saw blade speed 2,800 rpm Manual tilting angle adjustment with digital display Travel 830 mm max. Support table with working height of 990 mm: Pivoting range from 30° left to 30° right, home position 0° Pivoting range manual with digital display Compressed air supply 7 bar Air consumption per working cycle 35 l without spraying, 45 l with spraying Length 3,000 mm, depth 1,420 mm, height 1,600 mm, weight 1,250 kg

Condition: excellent (used), Year of construction: 2006, Year: 2006 - technically efficient, ready to work – after full service - flash limitation: 0.2-2 mm Godeyu R Eljpfx Acwsir - maximum welding length: 2600 mm - support arms - PLC controller

Year of construction: 2004, condition: excellent (used), functionality: fully functional, 2004 Elumatec AKS 134 Notching Saw – High-Precision Notching for Curtain Walls, Skylights & Conservatories Manufacturer: Elumatec Model: AKS 134 Year: 2004 Condition: Very Good Now available: Elumatec AKS 134 Notching Saw, manufactured in 2004 and in very good condition. This robust, German-engineered machine is purpose-built for precise notching in aluminium profiles, specifically designed for fabricators working on curtain walls, conservatories, skylights, and other complex architectural aluminium systems. The AKS 134 features a dual-saw unit design — vertical and horizontal — offering exceptional flexibility, accurate angles, and safe operation. Combined with digital angle displays, hydro-pneumatic feed, and automated cutting cycles, this is a premium choice for serious aluminium fabricators. 🛠️ Key Technical Specifications: 🔻 Lower Vertical Saw Unit: Saw Blade Diameter: 550 mm Tilting Range: +45° forward to -60° rear Max Cutting Height: 210 mm Motor Power: 3 kW (with motor brake) Speed: 2,800 rpm Manual Tilt Adjustment with Digital Display 400V, 3~, 50Hz 🔺 Upper Horizontal Saw Unit: Saw Blade Diameter: 500 mm Tilting Range: +55° down to -60° up Max Notching Depth: 190 mm Motor Power: 3 kW (with motor brake) Speed: 2,800 rpm Travel Distance: up to 830 mm Manual Tilt Adjustment with Digital Display 400V, 3~, 50Hz ⚙️ Machine Features: Dual saw blades for versatile and complex notching Workpiece stays fixed – only the saw units move, enhancing precision Simultaneous vertical saw unit height adjustment via handwheel (with analogue readout) Digital angle displays for both saws and pivoting back fence Manually adjustable support table Horizontal and vertical pneumatic clamping Automatic cutting cycle at 90° with two-hand safety control for angled cuts Hydro-pneumatic saw feed for smooth, consistent cutting Compressed Air Supply: 7 Bar (35–45L per cycle) 📏 Machine Dimensions & Weight: Footprint: 3000 × 1420 × 1600 mm Weight: 1,250 kg 🏗️ Ideal For: Aluminium façade and curtain wall manufacturers Skylight and conservatory fabricators Giedpsxyupksfx Acwor Precision aluminium notching applications Workshop environments needing multi-angle notching in high volumes 🧰 Reliable, accurate, and engineered for demanding tasks, the Elumatec AKS 134 is a proven performer in the architectural aluminium industry. Elumatec AKS 134 for sale Aluminium notching saw Ireland Curtain wall notching machine Elumatec saw for curtain wall systems Notching saw for aluminium profiles Elumatec AKS 134 specifications 550mm notching saw Double blade notching saw Used Elumatec machinery Aluminium construction saw Notes: *Specifications are given in good faith but not guaranteed*

Year of construction: 1991, condition: ready for operation (used), Technical features: heated knives, weld bead limitation 0.2mm, optimization of the welding result through the parallel sliding welding process, individual adjustment of the welding parameters, quick changing of the outer contour allowances by means of holding magnets. Air consumption at 6bar: 15l/Takt, angle adjustment range: 30-180°, profile height: 30-105mm, max. profile width at 90°: 157mm, compressed air connection: 8.7bar, power: 2.7kW, supply voltage: 220V, 50/60Hz, length: 770mm, width: 880mm, height: 1560mm, weight: 320kg. An inspection on site is possible. Gedsylbrdjpfx Acwjir

Condition: excellent (used), 2 - Used Urban AKS 4110 head welding machine - Heated stainless steel blades on top - Heated stainless steel blades on bottom Giodpfx Ajykp Dxecwsr - Weld seam limitation: 0.2 mm - Maximum welding length: 3.25 m - Set of support arms

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, power: 389.81 kW (529.99 HP), Mobile shredder DOPPSTADT AK 560 Eco Power Diesel engine: 530 HP Fine shredding basket (hole size can be agreed) Gisdpfx Acew Rz Rqowjr Rear discharge conveyor with magnet roll (magnetic head pulley) Twin drive (separate drives for scraper floor and infeed roller) Hydr. self propelled drive (for moving on site) Radio remote control

Year of construction: 2001, condition: ready for operation (used), A notching saw Elumatec for post-and-beam profile combinations is available. Lower saw blade: diameter: 550mm, tilt range: 45°-60°, max. cutting height: 210mm, speed: 2800rpm, power: 3kW. Upper saw blade: diameter: 500mm, tilt: 60°, max. notching depth: 190mm, speed: 2800rpm, power: 3kW. Stroke: 830mm, working height: 990mm, swivel left/right: 30°/30°. Machine dimensions X/Y/Z: approx. 3000mm/1450mm/1600mm, weight: approx. 1250kg. Documentation available. An on-site inspection is possible. Gisdpfx Ajw Nykgjcwer

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, type of input current: AC, pressure: 7 bar, Complete system consisting of 3 units of AKS 6400 4-head welding machines and 2 units of AKS 6600 4-head welding machines plus 2 units of SV 800/4 CNC weld seam finishing machines, including chip extraction system. Giedpfx Acsw Etv Aswsr

Condition: good (used), functionality: fully functional, 1 - Urban AKS 3610 Head Welding Machine - Weld bead limitation: 0.2 mm - Upper Nirosta blade, heated - Lower Nirosta blade, heated Gisdpfx Acex Ur Rdjwor - Angle adjustable from 30° to 180° - Set of support arms

Year of construction: 1996, condition: good (used), - Output: 15 -30 To/h - With mechanical variator - Motor for cylinder + spiked roller: 7.5kW 400V 50Hz - With integrated grape crusher AQ 30 - Grape crusher: 2.2kW - Plastic destemming cylinder - Without electrical equipment - Machine in good condition Gsdpfxjmn I Nbo Acweir Dimensions: - Length: 2840mm - Width: 1040mm - Height: 1130mm

Condition: excellent (used), Year of construction: 2000, Welding and cleaning line GRAF, year 2010 The direction of work from left to right Welder four-head SL4Q, max. welding dimension 2800 x 3200 mm, 0.2 mm flash, gasket formates Cooling station WPCNC4 4-axis cleaner with a turning station, equipped with knives for cleaning flat surfaces with a groove and smooth Gisdpfswrpwiex Acwor The line was servised in the end of 2022 y. with part replacement for over 10000 Euro (total cost of service). It is in very good condition. Currently is working.

Year of construction: 2013, condition: excellent (used), Welding and cleaning line GRAF, year 2010 The direction of work from left to right Welder four-head SL4Q, max. welding dimension 2800 x 3200 mm, 0.2 mm flash, gasket formates Cooling station WPCNC4 4-axis cleaner with a turning station, equipped with knives for cleaning flat surfaces with a groove and smooth The line was servised in the end of 2022 y. with part replacement for over 10000 Euro (total cost of service). It is in very good condition. Currently is working. Gisdpfxevr U Syj Acwjr

Condition: good (used), Year of construction: 2009, Double welding and cleaning line URBAN consisting of 2 four-head welding machines AKS 6910/4 - 30 /40, one with right-hand stop, one with left-hand stop, WINDOWS control, each with a URBAN TBA transport/cooling belt, transverse table with motor for removal of individual elements, URBAN SV 815 cleaning automatic with two heads, with infeed table and rotatable outfeed table, additional station for processing of corner and scissor bearing drillings as well as milling of elements with varying widths, buffer rack with tiltable shuttle table and two additional outfeed tables. Godpfsw Niqpsx Acwsir

Year of construction: 2007, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1340020469, Mitre Saw Machine AKS 134/00 1 x Saw Blade Ø550mm 1 x Saw Blade Ø500mm Giedpfx Acsx A D Ihswer Equipped with digital angle setting readout

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Year: 2007 Gjdpjxgqvtefx Acwsir - technically efficient, ready to work – after full service - SV 530 cleaning machine - AKS 1610 welding machine - TBA-F 26/25 cooling station - WT 530 turning station - Welding dimensions: 2300 x 3500 mm - Flash limit: 0.2 – 2 mm - Seal formers

Year of construction: 1993, condition: repair required (used), Circular saw sharpener Loroch AK Automat year 1993 blade diameter min/max - 80/710 mm Gedpfx Aogtmt Tscwjir graduation 3-25 mm grinding disc type - Borazon grinding disc diameter 200 mm drive motor 0,55 kw working speed 10-45 z/min coolant dimensions 1500×1200 x 2300 mm weight 750 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 10000x2500x1600 mm Weight 3300 kg Total power requirement 16,2 kw Gisdpfevz E Anox Acwor

Condition: new, M&S Gruseck GmbH NEW screening baskets from the specialist – 100% MADE IN GERMANY! Screening baskets suitable for the Doppstadt AK series 430, 435, 510, 535, 560, 635, 640, etc. Gisdpfx Acsxp Nzmewjr - TOP QUALITY - Various perforations - Short delivery times Many other spare parts also available from stock: - Rear screens - Tailgates - Various impact plates - Wear plates - Scraper floor rails - Hammers - Hammer holders - ... AND MUCH MORE!

Year of construction: 2024, condition: new, Universal notching saw; Height 1.100 mm; head +/-180 degrees. Saw stroke 900 mm, blade diameter 500 mm Gisdjd A Huwopfx Acwor

Condition: used, Year of construction: 2011, total length: 5,000 mm, total width: 2,100 mm, total height: 1,650 mm, Weight: 7.800 kg - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 02969-099B81 - Drive system: CNC - Control system brand: Cybelec - Control system type: CybTouch 6 Giodpfxsyxqrue Acwor - Drive type: Hydraulic - Configuration: Swing-beam - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 4100 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: Pneumatic - Finger guard: Fixed with lift-up guard - Angle adjustment: Motorized - Blade gap adjustment: Manual - Table type: Fixed table - Transport dimensions: 5000mm x 2100mm x 1650mm (l x w x h) - Transport weight [kg]: 7800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1998, total length: 3,350 mm, total width: 2,180 mm, total height: 2,780 mm, Weight: 9.000 kg Price: On request - Year: 1998 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No Giedpfsyrpvksx Acwor - Serial number: 230 - Drive system: Conventional - Power [kW]: 11.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 160 - Max. working width [mm]: 3100 - Column gap [mm]: 2550 - Crowning system: None - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Options: Digital readout - Transport dimensions: 3350mm x 2180mm x 2780mm (l x w x h) - Transport weight [kg]: 9000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2006, functionality: fully functional, Used CNC 4-meter press brake from Ermaksan Model: CNC AP 40200 Gjdpoyw Swiefx Acweir Capacity: 4100 x 200 tons 1 set of complete tooling Delem DA66w graphical CNC control CNC-controlled Y1, Y2, X, and R axes Manual crowning

Year of construction: 2016, condition: ready for operation (used), - USED - 4-AXIS SYNCHRONIZED CNC PRESS BRAKE AXIS: Y1 - Y2 - X - R BENDING LENGTH: 2100 mm TONNAGE: 60 ton THROAT DEPTH: 410 mm DISTANCE BETWEEN UPRIGHTS: 1700 mm UPPER BEAM TRAVEL: 275 mm CONTROL UNIT: DELEM DA58 Gisdpsxn U Rqjfx Acwor WEIGHT: 4560 Kg OVERALL DIMENSIONS: 3250 x 1960 x 2750 mm

Condition: excellent (used), For sale: a line pump from the renowned German manufacturer KSB, model ETALINE ETL 032-032-200, complete with Siemens motor. This unit is intended for use in industrial installations, heating and cooling systems, as well as water circuit applications. TECHNICAL DATA OF THE PUMP Manufacturer: KSB Model: ETALINE ETL 032-032-200 Flow rate: Q 4.0 m³/h Head: H 12 m Impeller diameter: 191 mm Rotational speed: 1459 rpm Year of manufacture: 2021 Flange connections Giedjywu Haepfx Acwsr MOTOR Manufacturer: Siemens Power: 0.55 kW Voltage: 400 V, 50 Hz Speed: approx. 1440 rpm Efficiency class: IE3 Design: ATEX Ex II 2G Protection: PTC CONDITION Very good condition Complete unit Minor visible signs of storage Technically fully functional APPLICATIONS Industrial process installations HVAC systems Water and liquid circulation Manufacturing plants Explosion hazard zones