Used honing machines for sale (88)

Condition: ready for operation (used), Year of construction: 2009, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, This 5-axis Matec 30-HV was manufactured in 2009, featuring a versatile universal machining center with a large X-axis travel of 3000 mm and a Y-axis of 600 mm. It includes a high-speed range up to 12,000 rpm, a tool magazine for 36 tools, and a high-pressure cooling system (70 bar). Ideal for complex 3D machining with its powered CNC rotary table and Heidenhain iTNC 530 control. Contact us for more information about this machine. Additional information • Dimensions of Machine (LxWxH): X = 3000 mm (table 3500 mm), Y = 600 mm, Z = 800 mm Horizontal • Rapid traverse: 48 m/min in the X, Y, and Z axes • Powered CNC rotary table for 3D machining • Tool magazine for 36 tools • Tool length max: 380 mm • 3D measuring probe with radio control and radio signal transmission • High-pressure cooling along and through the spindle (70 bar) Bwjdpfex D Rggsx Ab Iok • Coolant tank: 900 l • Automatic doors

Condition: ready for operation (used), Year of construction: 2010, number of axes: 3, This 3-axis GEHRING L2-630 vertical honing machine was manufactured in 2010. It features a 6-station rotary table, two honing stations, two measuring stations, and a brushing station. Fully automated with a robot feeder, consider the opportunity to buy this GEHRING L2-630 vertical honing machine. Contact us for more information. • 6-station rotary table • 2 honing stations Bjdpfxsx D Rins Ab Ijwk • 2 measuring stations • 1 brushing station Additional equipment • Robot feeder (enables full automation)

Condition: ready for operation (used), Year of construction: 2018, operating hours: 11,000 h, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 700 mm, controller manufacturer: HEIDENHAIN, table load: 1,600 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 30, number of axes: 5, This 5-axis +GF+ MIKRON HPM 1350U was manufactured in 2018. Ideal for advanced machining, this universal machining centre ensures precision and efficiency. Consider the opportunity to buy this +GF+ MIKRON HPM 1350U universal machining centre. Contact us for more information. Bjdpfx Asx D D Eiob Iewk Machine Benefits Technical Machine Benefits • Rotary table diameter: 1100 mm • Coolant supply: 80 bar • The machine is regularly serviced with very few hours and also has a maintenance contract with an authorized service provider. Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 15,000 rpm, travel distance X-axis: 1,016 mm, travel distance Y-axis: 635 mm, travel distance Z-axis: 635 mm, This 5-axis HAAS UMC-1000SS was manufactured in 2020. It features a large working envelope with X, Y, and Z axes measuring 1016 mm, 635 mm, and 635 mm respectively. Ideal for complex geometries and multi-sided machining. Consider the opportunity to buy this HAAS UMC-1000SS universal machining centre. Contact us for more information. Additional equipment • Chip Conveyor with Belt Drive • Export Packaging • 8-Station Pallet Pool for UMC • UMC Spare Tool Storage (1 unit) • Through-Tool Air Blast (TAB) • Auxiliary Coolant Filter • Chip Tray Filter Kit Machine Benefits Technical Machine Benefits • Standard program memory: 1 gb/ coolant tank capacity: 55 gallons/ cnc control cabinet cooler/ dynamic work offsets and tool center point control (dwo/tcpc)/ fast power-failure detection module/ ethernet interface/ haasconnect: remote monitoring/ haasdrop: wireless file transfer • Second home position/ high-speed machining (hsm)/ media display via m-code (m130)/ remote jog handle with touchscreen/ rotary encoders/ synchronized tapping/ safe run (safety restart feature)/ 1-year standard warranty • Enclosure with mist extraction preparation/ variable coolant pressure/ wi-fi connectivity to haas control/ wireless intuitive probing system (wips)/high-speed side-mount tool changer – 50+1 tools/ ct (sk) 40 spindle taper • Through-spindle coolant (tsc): 69 bar (1000 psi) Extra Information Bwedsyalh Sopfx Ab Isk Machine still under power

Condition: ready for operation (used), Year of construction: 2017, number of axes: 3, This 3-axis GEHRING 630-1 LR vertical honing machine was manufactured in 2017. It features a HAINBUCH sleeve with a diameter of 65 mm, VDI40 tool holders, and a hydraulic holder for reduction bushing. Ideal for precision honing applications. Contact us for more information about this machine. Additional equipment • HAINBUCH hexagonal collet sleeve, Ø65 mm — qty 1 • HAINBUCH alignment screwdriver — qty 3 • HAINBUCH drawbar adapter — qty 1 • Cable (unspecified) — qty 2 Bwjdpfx Aoyap Uieb Iok • Unclamping tool (unspecified) — qty 1 • Internal coolant pickup — qty 1 • VDI40 hydraulic toolholders, Ø20 (ISCAR) — qty 8 • MAPAL holder D12, Ø13, part no. — qty 4 • Reducer bushing for hydraulic holder, 20→13 mm — qty 6 • MAPAL HM reamer plate “Axel 92-R-0N” — qty 30 • MAPAL D12 holder/bracket Ø14 (unspecified model) — qty 1 • Hydraulic holder for reduction bushing ISCAR 20→14 — qty 3 • Chisel/tool holder DIN 69880 – E2 – 40×40 — qty 1 • MAPAL D12 holder/bracket Ø14 (unspecified model) — qty 4

Condition: ready for operation (used), Year of construction: 2004, operating hours: 53,875 h, spindle speed (max.): 15,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, controller manufacturer: MATSUURA, controller model: G-Tech 30i, number of slots in tool magazine: 240, number of axes: 5, This 5-axis Matsuura MAM72-25v was manufactured in 2004. It features X-travel of 550mm, Y-travel of 410mm, and Z-travel of 450mm. The spindle operates up to 12,000rpm with a BT40 taper and has a tool storage capacity of 240 pieces. Consider the opportunity to buy this Matsuura MAM72-25v universal machining centre. Contact us for more information about this machine. • B-axis travel: -110° to +110° • C-axis travel: 360° • Pallet working surface: 130 mm diameter • Max. workpiece size: 250 mm diameter x 250 mm height • After maintenance on the spindle the machine is limited to 12,000 rpm Additional equipment • BMO Titanium 50 robot cell (YOM 2016), available for an additional €30,000 • Includes: 1 zero-point clamping system and 1 long clamp Technical Specification Bsdoyf Hphjpfx Ab Iswk Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 6,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 550 mm, controller manufacturer: SIEMENS, controller model: n/a, number of axes: 4, This 3-axis CHIRON Mill 6000 SK was manufactured in 2004, featuring a high-speed motor spindle at 12,000 rpm and a travel range of X 6,000 mm, Y 630 mm, Z 550 mm. It includes a 5-axis milling package, 92 tool positions, and a Marposs collision monitoring system. Ideal for long part machining up to 6,000 mm and pendulum machining. If you are looking to get high-quality milling capabilities consider the CHIRON Mill 6000 SK machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • 92 tool positions hsk-a63 (background magazine) • Long part machining up to a maximum of 6000 mm • Machining of the end face (5th side) horizontally with swivel head (right/left) • Pendulum machining via center partition, max. Workpiece length 1773 mm with sk machining on both end faces (tool length 120 mm) • 4 hydraulic double vices (fixed center jaw) per pendulum section, positioning, and clamping via linear system (hydraulic release, mechanical clamping) Extra Information Additional Equipment High-speed package with Motor Spindle: 12000 rpm, 140 Nm Production Package: Scraper belt conveyor, discharge height 1050 mm Internal coolant preparation KNOLL VRF250 vacuum rotary filter (suitable for steel, cast iron, aluminum, plastic, brass) Bedjx Nr Iropfx Ab Ijwk High pressure 70 bar with HP pump and variable valve Flushing gun per pendulum field Emulsion mist extraction, 2 fans each 800 m²/h Rotating viewing window left and right (1400 mm from machine center) Automatic loading doors Center partition for pendulum machining 5-Axis Milling Package Air Blast Tool Life Monitoring Additional V24 RS232 in the control cabinet BDE/MDE interface (statuses: machine on, machine running, part counter) Marposs (Brankamp) CMS100 Collision Monitoring System 3D machine model for kinematic simulation in the CAM programming system 210 bar hydraulic power unit, 2 clamping circuits, separate system clamping pressure for each pendulum field, clamping pressure control KOHN linear clamping system 8 KOHN Multi 2000 MFS 125/680 HD hydraulic vices Two-part operator step across the entire operating width of 6000 mm With the 3 axes x, y, z and the swivel head, the software package 5-axis milling can be used to mill shapes, e.g. a curve. The software then synchronizes the axes.

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 270 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 250 mm, controller manufacturer: HEIDENHAIN, swivel angle B-axis (min.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis KERN HSPC EVO was manufactured in 2005. It features a spindle speed of 50,000 RPM, a tool magazine with 95 pieces, and a workpiece magazine with 24 pieces. The machine includes a Heidenhain iTNC530 control system and HSK 25 special holder. Note: the changer arm requires repair. If you are looking to get high-quality milling capabilities, consider the KERN HSPC EVO machine we have for sale. Contact us for more information. • Tool magazine: 95 pieces • HSK 25 special holder • Workpiece magazine: 24 pieces Bwsdpfxox H A Nbj Ab Isk • The changer arm no longer works, it needs a new guide/cylinder, see photo.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 17,050 h, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, overall weight: 20,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2012. It features a Heidenhain iTNC 530 control, a new spindle with 5,700 hours since 2021, and a robust 18,000 rpm spindle speed. The machine offers extensive travel with dimensions of 670/830/600 mm and supports 96 tool positions. Additional features include an internal coolant supply at 60 bar, a comprehensive coolant system, and a chip conveyor. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information. Additional equipment • new spindle since 2021: only 5700 spindle hours (Wear-related spindle replacement) • Inspection under power possible Machine Benefits Bwedpox D Dx Ajfx Ab Isk Technical Machine Benefits • Through-spindle air flow • Internal coolant supply: 60 bar • Coolant system with 1000l paper belt filter • Rotating viewing window • Chip flushing gun // bed flushing • Oil mist extraction • Blum tool breakage/measurement • Heidenhain 3d touch probe • Mobile electronic handwheel • Kinematics package Extra Information Spindle replacement due to wear (new spindle: 5600 hours since 2021) Production Hours: Control on: approximately 33300 hours, Spindle on: 17050 hours (new spindle 5600 hours, replaced in 2021 due to wear) Tool Positions: 96 Includes tool holders (shrink-fit chucks, collets, etc.)

Condition: ready for operation (used), Year of construction: 2001, operating hours: 20,325 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: TNC430, total height: 3,200 mm, table width: 1,250 mm, table length: 1,000 mm, table load: 2,000 kg, overall weight: 18,000 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 120, product length (max.): 6,000 mm, number of axes: 5, This 5-axis DMG DMU 125 P hi-dyn was manufactured in 2001. It features a Heidenhain control system, a SK50 spindle taper, and 120 tool stations. With spindle hours totaling 22,180, consider the opportunity to buy this DMG DMU 125 P hi-dyn universal machining centre. Contact us for more information about this machine. • Spindle hours: 22,180 • Tool magazine/stations: 120 • Travel distances: 1250 x 880 x 800 • Tool holder: SK50 • Changer: 120 tool positions in chain magazine • Gripper type: Double gripper • Control: Heidenhain TNC 430 • Working range: Longitudinal: 1250 mm Transverse: 880 mm Vertical: 800 mm • Dimensions: approx. 6 x 8 x approx. 3.20 m height • Weight: approx. 18,000 kgB axis is indexedAdditional data: • Full protection cabin • IKZ through spindle center • Blow air through spindle center retrofitted • Chip conveyor Bwodpfxex Sz Dhs Ab Isk • Coolant tank 600 liters • NC rotary table D1250 x 1000 mm • Max. load at table center 2,000 kg • Clamping grid 9 slots 18H7 a 100 mm • Kit motor with SK50 gearbox – spindle speed 8,000 rpm • Renishaw MP10 SK50 infrared measuring probe • Electronic handwheel • 4 operating modes possible • Flushing gun with pump Technical Specification Taper Size SK 50 Through-spindle Coolant Yes Dimensions Machine Depth 8000 mm

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 12,000 rpm, overall weight: 13,000 kg, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, spindle motor power: 18,500 W, tool weight: 8,000 g, number of axes: 5, This 5-axis MORI SEIKI NMV 5000DCG was manufactured in 2008. It features a maximum X-axis travel of 730 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a spindle speed of 12,000 rpm, a magazine capacity of 60 tools and an automatic pallet system. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NMV 5000DCG universal machining centre we have for sale. Contact us for further details. • B-axis rotation: +160° / -180° • C-axis table: 360,000 positions (0.001° resolution) • Rapid traverse (X/Y/Z): 50 / 50 / 50 m/min • Maximum torque: 135 Nm • Turning function: Integrated in table • Max. turning diameter: 450 mm • Max. swing diameter: 700 mm • Tool magazine capacity: 60 tools • Max. tool diameter: 125 mm • Max. tool length: 300 mm • Spindle cooling: Oil cooling system • Zero point: Automatic adjustment and dynamic correction (8 points) Bwodpfx Aboym Dbqo Isk • Cutting control: Automatic power control • Program memory: 2 MB • Custom macro: 999 variables • Tool life management: 128 × 2 groups • Status: Currently operational; inspection by Mori Seiki technician available Additional equipment • Pallet system: Automatic robot for loading/unloading • Measurement: Renishaw tool and part probing systems • Cooling: Independent high-pressure coolant system (40 bar) • Chip management: Rear chip conveyor • Power: Electrical transformer • Documentation: Full manuals, parts list, and electrical schematics • Tooling and pallets included; estimated value €50,000–€55,000 Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2020, operating hours: 5,717 h, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, total height: 2,565 mm, table load: 300 kg, overall weight: 8,200 kg, number of slots in tool magazine: 40, number of axes: 5, This 5-axis HAAS UMC-750 was manufactured in 2020, featuring a 762 mm X-axis, 508 mm Y-axis, and 508 mm Z-axis. It includes a spindle speed up to 12,000 rpm, ISO 40 taper, and a robust 40-position tool changer. The machine supports a maximum table load of 300 kg and offers advanced features like a wireless probing system, chip conveyor, and through-spindle coolant. Consider the opportunity to buy this HAAS UMC-750 universal machining centre. Contact us for more information. Additional equipment • Wireless Intuitive Probing System • Through-Spindle Coolant Machine Benefits Technical Machine Benefits • B-axis travel: 120° to -35° • C-axis travel: 360° • Spindle nose to table (max/min): 610/102 mm • Table diameter: 500 mm • Tool changer capacity: 40 positions Bwedpfx Abox Hbmre Isk Extra Information Machine still under power Dimensions Machine Depth 3978 mm

Condition: ready for operation (used), Year of construction: 2014, operating hours: 37,684 h, spindle speed (max.): 18,000 rpm, overall weight: 30,000 kg, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 900 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, number of axes: 5, This 5-axis HERMLE C60U Dynamic was manufactured in 2014. It features impressive travels of approximately 1200 mm in X, 1300 mm in Y, and 900 mm in Z. The machine is equipped with a NC swivel rotary table with a diameter of 1350 mm and a spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the HERMLE C60U Dynamic universal machining centre we have for sale. Contact us for further details. • Supply voltage: 400 V / 3~ • Mains frequency: 50 Hz • Control voltage: 24 V • Nominal current: 113 A • Power consumption: 78 kVA • Circuit diagram no.: 1-325-MS-96-021 • Axis configuration: 5 axes (X, Y, Z + A/C rotary table) • Software option: KinematicOpt • Tool interface: HSK-A 63 • Table type: NC swivel rotary table • Table diameter: Ø 1350 mm • Table size: 1350 × 1100 mm • Electronic thermal compensation (iTNC) • Electronic handwheel (iTNC) Bwodpfjylzc Nex Ab Ijk • Operating hours: 37,684 h • Spindle renewed approx. 600 operating hours ago • Exclusions: Clamping devices, tool holders, tools and zero-point clamping systems shown in pictures are not included Additional equipment • Through-spindle coolant, 80 bar (high-pressure) • Air blow device • Air through spindle centre • Chip flushing gun • Emulsion mist extraction • Probe: Heidenhain measuring probe • Tool breakage monitoring: BLUM

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller manufacturer: SIEMENS, controller model: 840D sl, spindle speed (max.): 15,000 rpm, spindle motor power: 46,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMF 260-11 was manufactured in 2017. A universal machining centre featuring a travelling column, X-axis linear drive at 80 m/min, and a motor spindle speed up to 15,000 min-1. It includes a swivel head, a 30-tool magazine, and a rigid table measuring 3,200 x 1,100 mm. Consider the opportunity to buy this DMG DECKEL MAHO DMF 260-11 universal machining centre. Contact us for more information about this machine. • Swivel head (B-axis) • Rigid table: 3,200 x 1,100 mm (125.98 in x 43.30 in) • Rapid traverse (standard): 40 m/min (131.2 ft/min) • Acceleration (standard): 4 m/s² (13.12 ft/s²) • Tool clamping: DIN 69872 • Tool magazine: 30 tools (chain with double gripper) • Chip-to-chip time: 9 s (SK40) • Direct measuring systems • Full-protective cabin and coolant tank • S-A3070 Dynamic package for DMF 260 linear (Y 1,100 mm): • Linear drive X-axis with 80 m/min (262.48 ft/min) • Rapid traverse XYZ: 80/60/60 m/min (262.48/196.86/196.86 ft/min) • Acceleration XYZ: 5/6/6 m/s² (16.4/19.68/19.68 ft/s²) • Active chiller for main spindle and linear motor • Tool magazine: 30 tools (chain with double gripper) • Chip-to-chip time: 7.5 s (SK40) • Motor spindle speedMASTER SK40: • Torque: 200 Nm / 130 Nm (148 ft-lbs / 96 ft-lbs) • 40% / 100% duty cycle Bwjdpfx Abjx D Iclj Iek Additional equipment • Chip conveyor (scraper type) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,215 h, controller manufacturer: HEIDENHAIN, controller model: TNC 640, spindle speed (max.): 20,000 rpm, spindle motor power: 35,000 W, number of axes: 5, This 5 axis MTcut UDS80H-5A was manufactured in 2019. It features a 20,000 rpm spindle, 120 Nm torque, and 35 kW drive power. Equipped with a HSK63 tool holder, 96-position tool changer, and a Kessler rotary tilting table with an 800 mm diameter. Includes Heidenhain TNC 640 control, 15" TFT screen, and Ethernet connectivity. Ideal for precision machining with its Heidenhain glass scales and BLUM laser tool measurement. Contact us for more information about this machine. • Operating hours: Control unit 6,904 h; Machine 5,480 h; Program runtime 2,215 h • Spindle: 120 Nm torque, separate spindle cooling for constant temperature • Tool interface: HSK63 with blow-out function • Rotary table: 800 mm diameter; Kessler rotary tilting table with 2 A-axes and 1 C-axis, direct-drive torque motors • Feedback: Heidenhain glass scales in all 5 axes • Tool changer: 96 positions with double-arm gripper • Control: 15" color TFT screen • Connectivity: Ethernet interface, 2x USB ports Bsdpfjx D In Uex Ab Iewk • Control functions: Plain text programming; short block processing time; create new program while another is running; proven Heidenhain machining cycles • Electronic handwheel • CE certified Additional equipment • Chip conveyor • Coolant system • Internal high-pressure coolant 50 bar with belt filter system • Coolant and compressed air gun • BLUM laser tool measurement • Heidenhain TS460 workpiece probe system for HSK63 with radio and infrared transmission • Heidenhain KinematicsOpt including Heidenhain calibration sphere KKH 250 • Extraction system: Filtermist FX4002, air volume 1,250 m³/h • Rotating viewing window • Work area light • Tool package Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2001, operating hours: 16,799 h, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis DECKEL MAHO DMC 80 U hi-dyn was manufactured in 2001. It features a rotary speed of up to 12,000 rpm, a B-axis automatic swivel milling head, and a C-axis NC rotary table measuring 900 x 630 mm. The machine includes a 60-position tool magazine, Heidenhain control system, dual pallet changer, and an internal coolant supply at 40 bar. Consider the opportunity to buy this DECKEL MAHO DMC 80 U hi-dyn universal machining centre. Contact us for more information. • B-axis automatic swivel milling head • C-axis NC rotary table: 900 x 630 mm • Tool magazine: 60 positions Bwjdpfx Absx H U D Ro Isk • Heidenhain control system Additional equipment • Dual pallet changer • Coolant temperature control system • Chip conveyor • Internal coolant supply 40 bar • Paper belt filter • Rotating viewing window • Cleaning gun • Oil and emulsion mist separator Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2013, number of axes: 3, This 3-axis GEHRING L2-630 was manufactured in 2013. It features a 6-station rotary table, including 2 honing stations, 2 measuring stations, and 1 brushing station, all automated. Ideal for precision honing applications. Contact us for more information. • 6-station rotary table • 2 honing stations • 2 measuring stations Bwedjx D Rihepfx Ab Isk • 1 brushing station Additional equipment • Robot feeder (enables full automation)

Condition: ready for operation (used), Year of construction: 2018, operating hours: 12,971 h, spindle speed (max.): 18,000 rpm, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2018. It features a 670x830x600 mm travel range, a swivel range of -120 to 120 degrees, and a continuous 360-degree rotary table. Equipped with an 18,000 rpm milling spindle, 96-position tool changer, and Heidenhain iTNC530 control, this universal machining centre is ideal for complex machining tasks. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information about this machine. • Swivel range (B): -120° to +120° • Rotary table (C): 360° continuous • Tool changer: 96 positions, HSK-A63, rear-mounted with display Bodpfsydpp Uex Ab Iowk • Measuring systems: Heidenhain linear scales (X/Y/Z) with purge air; Heidenhain rotary measuring system • POS kinematic module incl. reference ball • POS contour protection • Control cabinet cooling: active air-to-air • Spindle cooler: controlled • Oil cooling for 4th/5th axes: controlled • Network and USB connections • Automatically controlled crane loading hatch • Coolant pump at the head via M-functions • Tool change safety door • Table media interfaces: 3 hydraulic connections and 1 air connection in the table center • Mobile electronic handwheel • Operating hours: 22,996 total; 12,971 program runtime Additional equipment • External chip agitator / swarf (chip) conveyor • Chip removal device with dedicated pump • Water gun (washdown) • Air at the spindle • Electromechanical oil/coolant separator • Automatic coolant level monitoring • Operating status indicator light (stack light) • Hydraulic power unit, incl. control via M-function Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,000 h, spindle speed (max.): 18,000 rpm, overall weight: 10,500 kg, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 5, This 5-axis HERMLE C40U universal machining centre was manufactured in 2007. It features a travel of 850 mm in the X-axis, 700 mm in the Y-axis, and 500 mm in the Z-axis, with a rapid traverse of 45 m/min. The machine is equipped with a spindle speed of 18,000 rpm and a tool changer with 38 positions. If you are looking to get high-quality machining capabilities, consider the HERMLE C40U machine we have for sale. Contact us for further details. • Operating voltage: 400 V / 3~ • Mains frequency: 50 Hz • Control voltage: 24 V • Total power: 41 kVA • Total nominal current: 60 A • Master circuit diagram: 1-322-MS-96-002 • Rapid traverse: 45 m/min • Tool changer: 38 positions • Axis configuration: 5-axis • Linear axes: X, Y, Z • Rotary axes: A-axis (off-centre), C-axis (NC swivel rotary table Ø420 mm) • NC swivel rotary table: Ø420 mm • Internal coolant supply (IKZ): 80 bar • Laser tool measurement / breakage monitoring • Measuring probe: Heidenhain • Electronic handwheel • Electronic thermal compensation • Spindle hours: approx. 14,000 h (spindle replaced 11.2017) • Accessories: Without tools, tool holders and zero-point clamping systems Additional equipment • Paper band filter • Chip conveyor • Chip flushing gun Bwodpeyly A Isfx Ab Iek • Oil mist extraction Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,768 h, controller manufacturer: HEIDENHAIN, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 50 eVo linear was manufactured in 2005. It features a HEIDENHAIN control, a 40bar IKZ, a 60-tool magazine, and a spindle speed of 18k rpm. The machine includes automation capabilities fully adjustable for different product formats and positioning. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 eVo linear machine we have for sale. Contact us for more information. Bedpfxox Rd Hps Ab Iewk • Tool magazine: 60 tools • Through-spindle coolant (IKZ): 40 bar • Spindle overhauled in 2024 • B and C axes overhauled in 2024 Additional equipment • Automation (product handling), freely adjustable for product format and positioning • Paper belt filter • Blum laser tool break detection • Extraction system excluded Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, number of axes: 5, This DMG DECKEL MAHO DMC 60T was manufactured in 2005. A Universal machining centre, it offers robust construction and reliable performance for precision machining tasks. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60T Universal machining centre. Contact us for more information. Machine Benefits Technical Machine Benefits Bwsdpfxox Hbmfs Ab Ijk • Machine with nc rotary table and tool magazine for 60 tools: approximately 9610 kg • Belt filter system 900 l: approximately 850 kg • Installation weight of machine with max weight for workpiece, tools, and operating materials, belt filter system: maximum 11500 kg • B-axis complelty overhauled Extra Information Machine still under power // Contril unit: Heidenhain: MILL PLUS 2-fold pallet change. IKZ spindle with 12000 rpm, 40 bar Operating mode 4 for working with open door. Blum laser, with tool measurement and tool breakage control. Preparation for Blum 3D probe. Probe is not included in the scope of delivery. 900 liter cooling water tank with belt filter

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,900 h, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: HEIDENHAIN, controller model: TNC530, table load: 6,000 kg, number of axes: 3, This 3-axis ANAYAK Performer 2500 was manufactured in 2007. It features a Heidenhain TNC530 control unit, a versatile EMENA-VAR-3 milling head, and a robust table size of 2700 x 850 mm. Capable of handling a table load up to 6 tons, with traverse paths of 2500 mm in X, 1000 mm in Y, and 1100 mm in Z. If you are looking to get high-quality milling capabilities consider the ANAYAK Performer 2500 machine we have for sale. Contact us for more information. Machine Benefits Bsdpfxjx D Id Ns Ab Iowk Technical Machine Benefits • Table size: 2700 x 850 mm Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2007, operating hours: 40,522 h, controller manufacturer: MAZATROL, controller model: Matrix, total height: 3,400 mm, overall weight: 17,000 kg, This 5 axis Mazak Variaxis 630-5X was manufactured in 2007. A universal machining centre featuring a 2-pallet changer, 80-tool magazine, and a Renishaw probe. It supports a 70 bar internal cooling system, enhancing operational efficiency. Ideal for those looking to enhance their machining capabilities. Contact us for more information about this machine. • Loading method: Forklift/Crane • Known defects: Normal signs of use and wear • 80-tool magazine Bedpfx Aex D Ewajb Iewk • Renishaw probe • 70 bar internal cooling Additional equipment • 2-pallet changer Dimensions Machine Depth 5800 mm

Condition: ready for operation (used), Year of construction: 2004, overall weight: 5,000 kg, spindle motor power: 21,000 W, number of axes: 4, This 4-axis SCHÜCO Profilbearbeitungscenter 299 650 was manufactured in 2004. It features a powerful 21 kW motor and operates at a voltage of 380 V. With a maximum operating pressure of 0.8 MPa and a weight of 5,000 kg, this machine is designed for robust performance. If you are looking to get high-quality machining capabilities, consider the SCHÜCO Profilbearbeitungscenter 299 650 universal machining centre we have for sale. Contact us for further details. Bedpfx Ajypcgqeb Iswk • Voltage: 380 V • Frequency: 50 Hz • Current consumption: 42 A • Maximum operating pressure: 0.8 MPa • Nominal pressure: 0.6 MPa • Maximum air consumption: 200 NL/min Additional equipment • Wireless handheld scanner

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 4,000 rpm, controller manufacturer: HEIDENHAIN, controller model: TNC 124, number of axes: 3, This 3-axis KUNZMANN WF 4/3 was manufactured in 2001. It features a vertical spindle with a swiveling head, CNC-controlled X, Y, and Z axes, and a spindle taper of SK40. The spindle speed ranges from 0 to 4,000 rpm with rapid traverse rates up to 1,000 mm/min on all axes. Consider the opportunity to buy this KUNZMANN WF 4/3 universal machining centre. Contact us for more information about this machine. • Swivel head: ±90° • Spindle & drives (INDRAMAT): • Main spindle motor: 2AD104C-B050A1-CS06-A2N1 • Spindle taper: SK40 • Spindle bore: 22 mm • Quill diameter: 90 mm • Quill stroke: 60 mm • Axis drives: • X / Y / Z motor type: MKD071B-061-GG1-KN • Speed & feed: • Spindle speeds: • Range I: 0–1,000 rpm (stepped) • Range II: 1,001–4,000 rpm (stepless) • Rapid traverse: • X-axis: up to 1,000 mm/min • Y-axis: up to 1,000 mm/min Bwodpfoya D Svox Ab Iek • Z-axis: up to 1,000 mm/min • Feed force (X/Y/Z): approx. 4 kN • Electrical & control (INDRAMAT): • Power supply modules: • Net filter: NFD03.1-480-030 • Capacitor module: CZM01.3-02-07 • Controllers: • Spindle controller: DKC11.3-100-7-FW • Axis controller: DKC01.3-040-7-FW • Firmware versions: • Spindle: ESM 2.1-SMT-02V • Axes: ESM 2.1-SMT-02V Technical Specification Taper Size SK 40