Universal Machining Centre

+GF+ MIKRON HPM 1350U

Condition: used, Year of construction: 2009, functionality: unexamined, machine/vehicle number: 73136, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 720 mm, nominal power (apparent): 64 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 3,150 mm, total length: 5,605 mm, total width: 4,290 mm, overall weight: 12,600 kg, spindle speed (min.): 15,000 rpm, operating hours of spindle: 21,786 h, number of slots in tool magazine: 46, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, +GF+ MIKRON HPM 1350U – 5-Axis Machining Center (Year of Manufacture 2009) Used 5-axis milling machine MIKRON HPM 1350U from 2009. The machine is in operational condition and comes from ongoing production. Equipped with Heidenhain iTNC 530 control, rotary table Ø 1100 mm, 46-position tool magazine, and Renishaw OMP60 touch probe. Operating Hours (Readout): Control powered on: approx. 112,194 h Machine powered on: approx. 72,272 h Spindle running: approx. 21,786 h Programs: approx. 21,654 h Condition: Used machine with normal signs of use, technically operational. Inspection under power possible by arrangement. Work Areas Travels: X-axis: 1,350 mm Y-axis: 1,150 mm Z-axis: 720 mm (vertical spindle) / 895 mm (horizontal spindle) Spindle Standard spindle 15,000 rpm Speed range: 0–15,000 rpm Acceleration to max. speed: approx. 2.5 s Power: 38 kW (S6 = 40% duty cycle, TS = 2 min) Torque: 193 Nm (S6 = 40% duty cycle) Tool holder: HSK-A63 (DIN 69063-1, option ISO-B40/DIN 69871) Max. tool diameter: 130 mm (fully equipped) Bearing: Ceramic hybrid Ø 70 / Cronidur steel Lubrication: Lifetime lubricated Cooling: Water-cooled with corrosion inhibitor Feed Drives Feed motors: AC Rapid traverse / working feed: 32 m/min (20% duty cycle) 10 m/min (100% duty cycle) max. 15 m/min (40% duty cycle/hour) Nodpfx Aex Eh Iqjd Njcl Position measuring systems X/Y/Z: Linear scales (direct) Rotary Table Clamping surface: Ø 1100 × 1000 mm, flattened on the side Table load: 1,600 kg T-slots: 8 × 18H12 + 1 alignment slot 18H7 (100 mm pitch) Centering bore: Ø 50 H6 Clamping torque: 8,000 Nm Max. mass moment of inertia: 75 kg·m² Table elevation above floor: 1,120 mm Table drive: Direct torque motor Drive torque: 1,600 Nm (40% duty cycle, 2 min) Swivel Axis (A-axis) NC swivel range: +16° to −120° Measuring system: direct, absolute Clamping principle: hydraulic, stepless Max. swivel speed: 4,000 °/min Max. working swivel torque: 600 Nm (S6 40%) Swivel time 0° → 90°: 0.9 s Tool Magazine / Changer 46-position magazine (installed as per documentation) Magazine positions: 46 Tool holder: HSK-A63 (DIN 69063-1), option ISO-B40 Max. tool diameter: 80 mm (fully loaded) 130 mm (partially loaded) Max. tool length: 300 mm Max. tool weight: 8 kg Magazine loading: 200 kg Tool change time (vertical): 11 s Coolant / Chip Disposal External coolant supply (AKZ): 40 l/min, 2.5 bar Internal coolant supply (IKZ) Electrical Data: Installed rated power: 75 kW Connection power: 58 kW Connected load: 64 kVA Control voltage: 24 V DC Operating voltage: 3 × 400 V, 50 Hz Protection class: IP54 Dimensions & Weight Machine weight: approx. 12,600 kg (without accessories) Required space (L × W × H): 5,605 × 4,290 × 3,150 mm

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 950 mm, total length: 600 mm, total height: 1,850 mm, air demand: 0.9 m³/h, tank capacity: 250 l, input voltage: 230 V, overall weight: 180 kg, Equipment: cabin, lighting, XTON SANDBLASTER™ is a premium sandblasting and bead-blasting machine, ideal for workshops with limited workspace. The 250-liter pressure blast cabinet operates in a closed-circuit system and features a unique filtration system with an integrated dust collector. It is designed for exceptionally quiet operation, enhancing user comfort. The device is equipped with high-quality grain leather gloves, which are resistant to mechanical damage. The machine can also be painted in any color from the RAL palette. Additionally, an option is available for the unit to be made of stainless steel. EQUIPMENT: - Worktable measuring 80 x 55 x 60 cm - 250-liter chamber - LED lighting - High-quality gloves TECHNICAL SPECIFICATION: - Weight: 180 kg - External dimensions (W x D x H): 95 x 60 x 185 cm Nedpfsrl R Dljx Ad Nocl - Chamber dimensions (W x D x H): 88 x 55 x 60 cm - Chamber capacity: 250 L - Power supply voltage: 230 V / 50 Hz - Nominal working pressure: up to 10 bar - Cleaning efficiency: 25 m³/h - Cleaning grade: SA-3.0 – extensive and deep corrosion removal - Air requirement: 900 L/min - Maximum airflow: up to 12,500 L/min - Supported nozzle diameters: 2-15 mm - Nozzle material: tungsten carbide - Abrasive valve: MIKRO II - Viewing window dimensions: 270 x 510 mm - Worktable load capacity: up to 200 kg - Operating temperature: 10 - 50 °C - Construction: powder-coated steel, optional stainless steel

Condition: like new (used), Year of construction: 2018, operating hours: 11,300 h, functionality: fully functional, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, controller model: itnc 530, workpiece weight (max.): 1,600 kg, table load: 1,600 kg, rotary table diameter: 1,100 mm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 11,000 h, coolant supply: 80 bar, number of slots in tool magazine: 30, MIKRON HPM 1350U, 2018, machine is under service contract, fully functional under power. IKZ 80 BAR, Renishaw probe, laser measuring, kinematic OPT, OSS cycles. Geometry report available Nsdpfov Ibtcox Ad Nocl

Condition: used, Year of construction: 2015, x-travel 1.200 mm y-travel 600 mm z-travel 675 mm Control C 620 HSCI FS table-size 1.220 x 620 mm 40 fach Nodex Ak Hdopfx Ad Nocl Distance between table and spindle 735 mm turning speeds 10.000 U/min spindle drive 18 kW Internal cooling system 30 bar -Electronic steering wheel. -LINEAR RULES. -Laser probe measuring tools. -Preparation for piece measuring probes. PROBE NOT INCLUDED.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: GS1000/5-T, rotational speed (max.): 30,000 rpm, overall weight: 15,500 kg, Year of manufacture: 2014 Condition: very good Magazine: 66 x HSK63 Control: Heidenhain 530 Spindle: n=30,000 Ncsdpfxow Awmtj Ad Nol Erowa zero-point clamping system integrated into the table Erowa Robot Easy 250 automation with 6 pallets 3D probing system Oil-air lubrication of high-frequency spindle Laser measurement Spindle hours:

Condition: new, BRAND NEW MACHINING CENTER HEIDENHAIN TNC 7 digital path control with 19" screen HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis: 650 mm Y-axis: 700 mm Z-axis: 645 mm Table size (diameter): 410 mm Maximum workpiece diameter: 500 mm Maximum spindle speed: 12,000 rpm (oil-cooled with MQL) Ncodehy Artspfx Ad Njl Spindle taper: SK 40-BIG PLUS (BVD 40) Maximum spindle motor power: 17 kW ICS – internal coolant supply – 20 bar Rapid traverse X, Y & Z: 30,000 mm/min Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm ATC tool changer with double gripper: 30 positions (optional up to 80 tools) Hinged belt chip conveyor Full enclosure Only inquiries from Germany will be answered.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 650 mm, total length: 6,500 mm, table length: 2,000 mm, table width: 1,000 mm, total width: 3,600 mm, spindle speed (max.): 12,000 rpm, total height: 4,000 mm, overall weight: 14,000 kg, Equipment: rotational speed infinitely variable, Milling machine retrofitted in 2024 CNC TNC 530 HEIDENHAIN Distance between columns 1250 mm HSK 63 ELECTROMANDRINO spindle 12.000 rpm INTEGRAL fairing Nedpfx Ajul Txzsd Nocl

Condition: used, Year of construction: 2020, DOOSAN LYNX 2100LYA Year: 2020 FANUC touch control Ncodpjx Id D Aefx Ad Nsl Specification: Max spindle speed: 6000 rpm Max turning length: 510 mm Max bar diameter: 51 mm Max turning diameter: 300 mm Y-axis: 105 (±52.5) C-axis: 360° Turret: BMT45P 24 positions - Programmable tailstock - Tool probe - LNS chip conveyor - Driven tool holders: 4 pcs (2/2) - Standard tool holders: 6 pcs Operating hours: 3177 hours

Year of construction: 2021, condition: new, Graver Grinding Machine Ncsdpfegllp Uox Ad Nol Make: HERZOG (AMA) Model: Pregraph U2 Condition: New machine with warranty - for grinding of gravers, pins, punches and round parts - robust, durable construction - versatile application possibilities - motor protection and restart protection accessories: - Extraction tool, through axial adjustment of the disc, the previous setting is setting is retained - Machine light - Operating tool - Grinding wheel with flange - Operating instructions

Condition: excellent (used), Year of construction: 2017, High-Performance 5-Axis Machining Center POSMILL H800 U Year of manufacture: 2017 Operated in single-shift mode Large spindle cooler Full Heidenhain measuring systems installed on all axes Heidenhain 530 control unit Kessler spindle, 18,000 rpm Kessler rotary swiveling arm, swing diameter 800 mm, fully usable with zero-point clamping system New maintenance scheduled for April 2025, rotary union replaced (€8,600) ————— Technical Data: X-axis: 670 mm Y-axis: 830 mm Z-axis: 600 mm (A-/C-axis) Swivel range approx. -100 to +120° and -120 to +120°, C-axis endlessly rotating 360° Ncsdoxtnikspfx Ad Nsl Table diameter: 800 mm Tool holder: HSK 63 Tool positions: 96