Universal Machining Centre

DMG DECKEL MAHO DMF 260-11

Condition: like new (used), Year of construction: 2014, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,200 mm, 1 as-new CNC travelling column bed milling machine Brand: Soraluce Model: FL 8000 Year of manufacture: 2014 Control: Siemens 840 D Solution Line Ljdpfjwzx Ntox Ad Nehb Technical data: Travel X-Y-Z: 8000 x 1300 x 2200 mm C-axis travel: 360 degrees Table clamping area: 6000 x 2000 mm Tool holder: SK 50 Capto C8 Spindle speed up to: 4000 rpm Main drive: 43 kW Rapid traverse: 35 m/min CNC rotary table: 1600 mm, 250 rpm Weight approx.: 40 t Equipment / Accessories: Tool magazine CNC-controlled universal milling head Chip conveyor Full enclosure Complete coolant system Electronic handwheel Internal coolant supply (IKZ) Indexing clamp Rotary carousel table D=1600 mm, 250 rpm Table area 6000 x 2000 mm Face slide, etc.

Condition: excellent (used), mileage: 380,592 km, power: 353 kW (479.95 HP), first registration: 08/2014, fuel type: diesel, tire size: 385/65/22.5, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: yellow, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro5, suspension: other, Year of construction: 2014, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, fog lights, power mirror, soot filter, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Power brake booster - Speed limiter - Refrigerator - Air suspension - Media system - Particulate filter - Sun visor flap - Toolbox - PTO (power take-off) - Central lubrication system - Towing jaw = Further Information = Axle Configuration Brakes: Disc brakes Front axle 1: Tire size: 385/65/22.5; Max. axle load: 9,000 kg; Steering axle; Suspension: leaf spring Front axle 2: Tire size: 315/80/22.5; Max. axle load: 9,000 kg; Steering axle; Suspension: leaf spring Lhodpfx Adjwa Np Io Nob Rear axle 1: Tire size: 315/80/22.5; Twin tires; Differential lock; Max. axle load: 12,000 kg; Suspension: air suspension Rear axle 2: Tire size: 385/65/22.5; Lift axle; Max. axle load: 8,000 kg; Suspension: air suspension Weights Curb weight: 26,875 kg Payload: 10,125 kg Gross vehicle weight: 37,000 kg Functional Boom type: Telescopic (10 sections) Boom length: 26.3 m Lifting capacity: 16,900 kg Lifting height: 2,630 cm Crane: PALFINGER PK92002-SH H, year of manufacture 2014, mounted behind the cabin Body manufacturer: PALFINGER PK92002-SH H CE marking: yes Condition Technical condition: very good Visual condition: very good MANN MAURER TGS 35.480 8X4H-6 BL WITH PALFINGER PK92002-SH H CRANE EURO 5 L PACKAGE 480 HP DRIVE 8X4H-6 BL WHEELBASE 530CM LEAF / AIR SUSPENSION SLEEPER CAB WITH AIR CONDITIONING, REFRIGERATOR MEDIA SYSTEM, PHONE PREPARATION MANUAL TRANSMISSION TRAILER COUPLING FLASHING BEACON FRONT AND REAR TOOLBOX CARGO DIMENSIONS L=545CM, W=247CM PALFINGER PK92002-SH H 10 X HYDRAULICALLY EXTENDABLE PALFINGER WINCH KBW007-A 18M TOTAL 5 X EXTENSIONS CRANE CAN OPERATE IN FRONT OF CABIN VIA 1 X FRONT OUTRIGGER WIRELESS REMOTE CONTROL MAX. LIFTING CAPACITY AT 4.3M 16,900 KG MAX. WORKING HEIGHT 26.3M

Year of construction: 1984, condition: ready for operation (used), Rafamet UBB 112/2 Wheel Tread Diameter Minimum 700 mm Wheel Tread Diameter Maximum 1120 mm Clamping length 540 - 1050 mm Wheelset Axle Length Minimum 1640 mm Wheelset Axle Length Maximum 2800 mm Maximum Tire Width 150 mm Maximum Wheelset Weight 4000 kg Saddle Set Up Motion Speed 2000 mm/min Saddle Feed Maximum 2000 mm/min Lsdpfxehvml Is Ad Nohb Main Drive Motor Power 80 kW Weight aprox 40000 kg

Condition: used, different types available Lhsdpfxsdc A Sbj Ad Nob

Condition: as good as new (ex-display), Year of construction: 2013, operating hours: 1,265 h, functionality: fully functional, spindle speed (max.): 20,000 rpm, turning diameter: 4 mm, Equipment: documentation/manual, rotational speed infinitely variable, Citizen R-series of automatic lathes dedicated to small-diameter machining. This machine is used very little (15800 parts cut). model year 2013. Ledpfevtancex Ad Nshb With ASP-04 barfeeder. VAT is not needed if the sales happen outside of Turkey.

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 35,000 m/min, rapid traverse Z-axis: 35,000 m/min, workpiece weight (max.): 200 kg, total length: 500 mm, total width: 400 mm, table load: 200 kg, rotary table diameter: 280 mm, Coolant system Filtration tank HR 410 Handwheel iTNC530 controller 1e owner machine X - Travel: 600mm Y - Travel: 450mm Z - Travel: 400mm A - Axis: 110° B - Axis: 360° Table Length: 500mm Table Width: 400mm Table load: 200 Table Ø: 280mm Feed rate X-Axis: 35000mm/min. Feed rate Y-Axis: 35000mm/min. Lhsdpsx R S Smefx Ad Njb Feed rate Z-Axis: 35000mm/min. Feed rate A-Axis: 10Degrees/min Feed rate B-Axis: 15Degrees/min Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 3500mm Width: 3500mm Height: 2800mm Weight: 6600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2011, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2011 Control system: Fanuc Series 31i-MODEL A5 Spindle speed: up to 10,000 rpm Travel paths X-axis: 300 mm Travel paths Y-axis: 300 + 100 mm Travel paths Z-axis: 330 mm Rapid traverse X, Y, Z: 54 m/min Tool magazine: 21 stations Max. tool weight: 2 kg Total tool weight: 23 kg Lhjdpfx Ajxflxaed Njb Max. tool diameter: 80 mm Admissible table load: 200 kg Machine weight: 2,050 kg Power supply: 200/220 V, 3-phase, 50/60 Hz Power consumption: 1.5 kVA SCOPE OF DELIVERY Includes (not exhaustive): CNC Machining Center Fanuc Robodrill α-T21iFa Coolant pump and chip tray Exact scope of delivery as per photo series The Fanuc Robodrill α-T21iF machining center from 2011 impresses with its high precision and dynamic performance in a compact design. With travel paths of 300 mm in X, 300 + 100 mm in Y, and 330 mm in Z, the machine offers versatile machining capabilities. The 21-position tool changer ensures flexible production processes and minimizes setup times. The spindle achieves speeds of up to 10,000 rpm, enabling both fine machining and powerful cutting operations to be performed efficiently. The Fanuc Series 31i-Model A5 control system provides user-friendly and reliable programming. With a maximum workpiece load capacity of 200 kg and a compact construction, the machine is ideally suited for universal use in both single-part and series production. No guarantee is given for the correctness, completeness, or currency of the information provided.

Condition: used, Year of construction: 2017, Absolutely as good as new Lhodpfx Aevvxvded Nob Consists of 1 measuring case 12-20mm Consists of 1 measuring case 20-50mm Consists of 1 measuring case 50-100mm

Condition: good (used), Year of construction: 2020, machine/vehicle number: 164390-0000-Z2724, Offer 24059 Technical data: - Jaw design stepped jaws - Jaw width 125 mm Lhodperwmkaefx Ad Njb - Jaw height 40 mm - Clamping width 1 0 - 216 mm - Clamping width 2 97 - 312 mm - Clamping force 40 kN - Total height 140 mm - Weight 33 kg - Min. Space requirement L 463 x W 126 x H 145 mm

Condition: new, thread dia. M3 - M16 mm max. 187 U/min. working area 180 - 2000 mm engine output 0,7 kW Lsdpfx Ajfg U Sqed Nohb Electric tapping machines for M3 - M16 thread, Angle adjustable. 9 pcs. Quick-change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. optional: Clamping table with T-slots: 990x700x800mm. Magnetic base. Also available: M14 to M24 and M27 to M33.