Viering Werkzeuge Maschinen GmbH

Condition: used, cutting capacity: 280 mm,

Year of construction: 2017, Condition: excellent (used), Used Elumatec SBZ 151 Profile Machining Centre with 13.3m Processing Length For machining aluminium and steel profiles Fully functional, in very good condition Year of manufacture: 2017 Machining length: 13,300 mm End processing up to 9,980 mm with tool length of 116 mm 5-axis CNC control system with 15" display Tool changer with 20 positions HSK F63 Separate tool changer for saw blade, max. 500 mm diameter 16 pneumatic horizontal material clamping devices Autonomous clamp positioning, positioning during secondary time Two separate working zones, suitable for pendulum operation 2 pneumatic retractable material stops Handheld control device 2 light curtain systems with cameras at the front and side protective fencing Automatic length measurement with Z-axis stroke Minimum quantity lubrication Centralised lubrication Thread cutting without compensating chuck Double clamping per clamp Without software license X-axis [mm]: 13,300 mm Y-axis [mm]: 1,150 mm Z-axis [mm]: 715 mm Traverse speed X-Y-Z axis [m/min]: 60/40/40 A-axis swivel angle: +/- 110° freely programmable Gielhcdowynkqowzow C-axis swivel angle: +/- 180° freely programmable Max. swivel speed: 175°/sec Max. milling cutter diameter: 40 mm vertical / 100 mm horizontal Max. saw blade diameter: 180 mm Max. tool length: 180 mm from taper dimension Max. spindle speed: 24,000 rpm Spindle power: 21 kW Connected load: approx. 40 kVA Total operating hours: 39,697 h Total spindle hours: 23,042 h

Year of construction: 2018, Condition: excellent (used), For machining aluminium and steel profiles Fully functional, in very good condition Year of manufacture: 2018 Machining length: 7,200 mm 3-axis control with 15" monitor Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control unit Safety light curtain at the front and lateral safety fence Minimum quantity lubrication system Centralised lubrication system Thread cutting without compensating chuck Easy programming via hand control unit High-speed spindle up to 18,000 RPM Includes 3 angle heads X-Axis [mm]: up to 7,200 / 7,200 Y-Axis [mm]: up to 485 / 310 Z-Axis [mm]: up to 340 / 260 Traverse speed X/Y/Z-Axis [m/min]: 60/60/60 Max. milling cutter diameter: 25 mm Max. saw blade diameter: 180 mm Gislhcdwowynitezsw Max. tool length: 200 mm (tool + holder) Max. spindle speed: 6,000 RPM Spindle power: 6 kW Weight: approx. 5.5 t Total operating hours: 30,844 h Total spindle hours: 11,583 h

Condition: new, Year of construction: 2025, Machining center with 4 CNC controlled axes for machining profiles made of aluminum, PVC, and steel Machine frame in stable welded construction, stress-relieved annealed, with hardened rail guides Protective cabin over the entire machining length Pneumatically opening safety door Milling spindle: 3.8/4.6 KW S1/S6 3.0/3.7 Nm S1/S6 max. 18,000 rpm, air-cooled with tool holder ISO 30 Gielowrcwpohcdwzjw with minimum quantity cyclic spraying for tools with fill level monitoring Tool magazine: 5 positions, on the left side of the machine bed, for holding drilling, milling, and thread cutting tools, angle head, disc milling cutter up to Ø 150 mm Workpiece clamping: 4 pneumatic profile clamps, clamping range up to 250 mm automatic positioning via device on the Z-axis Workpiece positioning: One pneumatic reference stop each on the left and right of the A-axis Travel paths: X - Axis 3500mm Y - Axis 370mm Z - Axis 348mm A - Axis ±90° Travel speeds: X - Axis 70m/min. Y - Axis 30m/min. Z - Axis 30m/min. A - Axis 60°/sec Max. working areas: X - Axis 3270mm Y - Axis 250mm at 0° 116mm at ±90° of the A-axis Z - Axis:170mm at 0° 200mm at ±90° of the A-axis Operating software: CAD/CAM in 3D technology (option, included!) Programming system according to ISO standard Functionality: Linear and circular interpolation on two axes (X-Y) Three-side machining by swiveling the A axis 90°-0°-90° Face machining using a disc cutter Operating modes: One profile bar over the entire machining length Two profile bars in divided machining length Lubrication system: Automatically controlled central lubrication for all axes, ball screw drives and guides, with fill level monitoring Operation: 18.5" touchscreen Mouse + keyboard Connection data: Electrical: 400V/50Hz (3-Ph+N+PE), 16 A, Delivery without power cable Pneumatic: pressure 6 - 8 bar Dimensions and weight: Length: 5800mm Width: 1640 mm Height: 2000mm Weight: 2000 kg incl.: graphical programming software CM3D/CAD3D barcode reader additional network connection incl. remote maintenance/diagnosis for 1 year

Condition: good (used), Year of construction: 1998, Double miter saw ideal for insect screen processors! Gislewnrbvjhcdwzsw For aluminum, cutting length 4000mm Saw blade diameter maximum 500mm Swivel range: 90°- 45° pneumatic With hydropneumatic saw feed Horizontal workpiece clamping Vertical workpiece clamping Fixed unit on the right, the left unit is movable Automatic positioning control Roller track moving with the left saw unit Incl. software for macro programming

Condition: new, Year of construction: 2025, 3 NC axes for length as well as electronic tilting of the saw blades outwards 22.5° and inwards 135° Cutting length 5000mm Processing of individual cuts Processing of cutting lists Creating cutting lists via keyboard Import of cutting lists via USB storage device or over network Corner angle automatic/incremental cut Overlength cut processing Short cuts from 5mm cutting length Cross cuts Manages printing of labels with data or barcodes Hydropneumatic saw blade feed, continuously adjustable Pneumatic protective hoods Moving roller conveyor at the right saw unit with additional clamping cylinder Length positioning taking into account the saw angles and profile height Profile height measurement with length compensation incl. horizontal clamping cylinder Each saw unit has one horizontal and one vertical clamping cylinder Additional horizontal clamping cylinder at the fixed saw unit left of the saw blade 1 piece profile support between the saw units, pneumatically swiveling With 2-hand control IPC with Windows Embedded and HMI 15.0” touchscreen Incl. the options Minimum quantity spray devices Label printer Network connection for teleservice, 1 year duration We always have suitable extraction systems in stock, also for already existing aluminum saws! Golhcswnfvtjdwzeiw

Year of construction: 2008, Condition: good (used), Feed side left, swiveling of the saw unit by 45° (right and left) and manual horizontal swiveling by 45° on one side. Max. saw blade diameter 400mm. Equipped with mist spraying device. Optimal clamping of the workpieces to be machined via a horizontal clamp that presses the material against the rear cross stop. The angle positioning of the saw blade is achieved by swiveling the support table with lock pin for 45° (right and left) and manual locking for intermediate miters. incl.: Measuring system on the right, operated via handwheel and digital display, Measuring length up to 4000mm Gjlhcdowluckowzjiw

Condition: new, UNIMAX 3 PILLAR DRILL Powerful, precise pillar drill with a wide range of applications. Drilling table adjustable via rack and worm gear and pivoting around the column. Reversible switch for forward/reverse rotation, emergency stop button, digital speed display Infinitely variable spindle speeds Range A 80 - 1440 rpm Range B 180 - 3200 rpm Continuous drilling capacity 25 mm Standard drilling capacity 30 mm Tapping capacity M 20 Spindle MT 3 Drilling depth 125 mm Thrust 260 mm Spindle/table 90 to 840 mm Table surface 500 x 365 mm Total height 1855 mm Weight 250 kg Incl. Drilling kit, consisting of 1 drill chuck taper MK3 / B16 2 reduction inserts MK3 / 2, MK3 / 1 1 MSP 140 vise Gelhcdwowkhliezoiw 1 keyless drill chuck 1 - 16 mm / B16

Year of construction: 2015, Condition: excellent (used), Machining center with 4 CNC-controlled axes for machining profile bars or parts made of aluminum, PVC, non-ferrous metals, and steel up to 3 mm. Travel range X-axis up to approx. 4300 mm Y-axis up to approx. 270 mm Z-axis up to approx. 300 mm The profile turning device positions at -90°, 0°, and 90°, eliminating the need for angle heads for lateral machining and fully utilizing the spindle motor's performance range. Minimum-quantity oil spray system 4 clamping elements 8-station tool changer HSK-63F tool holder USB port RJ45 network card Including the following options: Camplus software Gelhcdwjwhwplszeiw Shape software MG Pilot control panel Pneumatic reference stop on the right side

Year of construction: 2024, Condition: new, Available from stock in various versions! For mounting on aluminum circular saws, ideal for double miter saws and automatic sawing systems. Power 2.2 or 3.0 kW, with or without remote start. Removable 160-liter container. 2 extraction nozzles. Mobile, with 2 lockable casters. Gislhcdwewczfajzow Hose, connectors, and reducers available to suit your needs.

Condition: excellent (used), Year of construction: 2020, Available from stock! Column-guided band saw with semi-automatic sawing process including: Clamping the workpiece, sawing, and raising it to the set height after the cut 90° round 335mm, flat 500x335mm Cutting speed: 15-150m/min AC frequency-controlled drive, continuously adjustable at the control panel Gijlhcdewcxl Dowzjw Incl.: Hydraulic bundle clamping device Micro-spray device Laser light Material support table on the infeed side with lifting roller

Condition: new, Year of construction: 2025, Available from stock! Semi-automatic band saw with double-sided miter adjustment from 90° to 30°, continuously adjustable to 0.5° accuracy according to the scale. Includes the optional micro-spray device! Hydraulic raising/lowering of the saw frame Semi-automatic sawing process Hydraulic material clamping / short-stroke cylinder Rapid lowering to the top of the material Gelhcowcwggedwzsiw 30° left Ø 130 or 120x120 45° left Ø 200 or 180x180 90° Ø 260 or 300x260 45° right Ø 200 or 180x180 30° right Ø 130 or 120x120 Remnant length 25mm

Condition: new, Year of construction: 2025, turning diameter over cross slide: 270 mm, spindle bore: 58 mm, turning diameter: 460 mm, center height: 230 mm, center width: 1,060 mm, quill stroke: 130 mm, quill diameter: 60 mm, total length: 2,280 mm, total width: 1,150 mm, total height: 1,650 mm, Turning diameter in gap: 690 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 25 rpm, overall weight: 1,910 kg, quill mount: MK 4, metric thread pitch (max.): 14 mm, tailstock quill diameter: 60 mm, Optimum TH 4610D center lathe with DPA 31 Plus digital position indicator and quick-change tool post Gelewaaf Hohcdwzjiw Hardened and ground Z-axis guideway Guaranteed spindle nose concentricity ≤ 0.015 mm Shafts, gears, and main spindle run in an oil bath Lead screw cover Precisely machined slide All guideways adjustable via V-ledges Mechanical longitudinal feed shutoff of the bed slide with four adjustable eccentrics Right/left rotation on the bed slide can be switched via a switch spindle Central lubrication in the bed slide Top slide adjustment range ± 90° Smooth-running, hardened, and ground gears mounted on two adjustable precision tapered roller bearings Switch with life cycle calculation, tested according to EN ISO 13849 Large chip guard with integrated LED Machine lamp Handwheels with adjustable fine scales of 0.04 / 0.02 mm Safety handwheels with disengagement function according to EN23125 on the X and Z axes Quick-action feed gears in a closed design, gears and shafts hardened and ground, running in an oil bath on precision bearings Adjustable thread dial scale Tailstock for taper turning adjustable ± 10 mm Tailstock sleeve and handwheel with adjustable fine scale of 0.025 mm Quick, easy, and tool-free adjustment of the tailstock using a clamping lever Cable routing via energy chain Heavily ribbed prismatic bed, induction-hardened and precision-ground from gray cast iron Coolant system with separate coolant tank with level indicator and oil separator; Easy and complete emptying and cleaning according to DIN standards Emergency stop device with foot operation Scope of delivery: Fixed steady rest, opening Ø 25 - Ø 178 mm Revolving steady rest, opening Ø 19 - Ø 114 mm LED machine light Adapter MK6-MK4 Non-revolving center MK4 Non-revolving, but temperature-resistant center MK4 Quick-change tool holder SWH 5-B Tool holder 25 x 120 Type D for 20 mm square chisel Thread gauge Set of interchangeable gears Gears for thread gauge (metric) Initial machine filling with high-quality oil Operating tools Options available upon request; we will be happy to advise you: - Three-jaw chuck / four-jaw chuck - Steel reamer / turning tool - Mounting elements - Commissioning Do you need a different machine? Please contact us!

Condition: excellent (used), Year of construction: 2014, Available from stock! Semi-automatic band saw with miter adjustment on both sides • Fast miter adjustment from 90° to 30°, continuously adjustable to 0.5° accuracy according to the scale. The miter pivot point is the intersection point between the saw blade and the material feed system, thus ensuring no change in the length. • End stops at 30° + 45° left • Quick material clamping: The material is clamped parallel at 90° at any angle of the saw frame. • Machine stand with chip collection tray • Saw blade drive with limit switch and automatic frame lifting to the top of the material. • Precise carbide-tipped saw blade roller guide. • Miter range continuously adjustable from 30° to 150°. • Coolant system supplied as standard (including electric preparation for minimum quantity spray system). Additional equipment DG-HS: Hydraulic raising/lowering of the saw frame. Semi-automatic sawing process. Hydraulic material clamping/short-stroke cylinder. Rapid traverse lowering to the top of the material. Gijlhjv Rbtnjcdwzew Cutting range: 30° left Ø 130 or 120x120 45° left Ø 200 or 180x180 90° Ø 260 or 300x260 45° right Ø 200 or 180x180 30° right Ø 130 or 120x120 Remnant length 25mm Smallest diameter 5mm Motor 1.0 / 1.5 kW Saw blade 3350x27x0.9mm Cutting speed 28/56 m/min

Condition: good (used), Year of construction: 2016, Robust electro-hydraulic CNC swing cut shears including CYBELEC CNC touch screen control including motorized cutting gap adjustment Equipment: - some functions of the CNC control: - back stop pre-selection - X axis - motorized cutting gap adjustment - number of pieces - cutting length limitation - material pre-selection, including sheet thickness - cutting line lighting (cutting on scribe mark) - motorized back stop, travel = 5.0 - 1,000 mm (X axis) on ball screws - including selectable retraction function ("swing-away function") - 1x side stop, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - ball rollers in the front support table - hinged finger guard, with safety switch - cutting line lighting with silhouette - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Freely movable foot switch - CE mark/declaration of conformity Golhov Ikp Tjcdwzoiw Technical specifications Sheet width: 3100 mm Sheet thickness: 6.0 mm Sheet thickness for stainless steel: 4.0 mm Holders: 14 pieces Stroke rate: 20 strokes/min Cutting angle: 1.2 ° Weight: 5500 kg Dimensions L-W-H: 4000 x 2410 x 1610 mm

Condition: good (used), Year of construction: 2013, Profile machining center Axis travel X-axis: 7430 mm Y-axis: 1320 mm Gislhcdjvy E Ibowzsw Z-axis: 500 mm A-axis: +/-90° Working areas X-axis: 7460 mm Y-axis: 650 mm Z-axis: 250 mm 8 clamping elements Automatic tool magazine with 8 places in a protected housing, for drilling, milling and thread cutting tools, angle head and disc milling cutter, max. Ø 200 mm, + 2 places for 2 angle heads Tool holder ISO 30 In pendulum operation (2 zone machining) the working stroke per zone is limited to 3500 mm

Condition: new, Year of construction: 2025, Speeds: Level 1: 37-185 rpm Level 2 150-750 rpm Torque in Nm 165+42 Holder size 2 diameter 31 Capacity M3-M24 Working range R = 1800mm Working height (without wheels) 805mm Includes: Ball-bearing, wear-free parallel arm radius: 1800mm 400V/3ph hydraulic system Clamping table 800x600mm with 3 T-slots 19mm Working and return speeds can be set separately electronically (using a frequency converter) Digital depth setting D-Touch, work cycle of your choice Manual: direction of rotation right/left using push buttons Automatic: digital input of depth, the direction of rotation is reversed at the set depth. Digital speed display (in the D-Touch control) Micro spray system for tool lubrication (integrated in the machine head) Quick-change holder for Bilz thread cutting holder with slip clutch, among others incl. Gjlhcjvu Uhtjdwzsiw 1 set of running wheels 1 set of thread cutting holder M4-M22/24 1 piece reducing ring for M4

Condition: good (used), Year of construction: 1998, with micro spray device Roller conveyor supply 3m, removal approx. 6m with measuring device Chip drawer Dimensions of the saw blades: 2950 x 27 x 0.9 mm Maximum cutting capacity: 280 mm Maximum jaw opening: 280 mm Height of the jaws: 130 mm 2 cutting speeds Pivoting cut from 0 to 60° Automatic lowering Manual jaw clamping Lubricant pump Voltage: 380 V Width: 900 mm Depth: 1900 mm Total height in raised position: 1900 mm Gelhcjvrdu Rsdwzeiw Weight: approx. 650 kg

Condition: good (used), Year of construction: 1996, Hecht electronic length stop with positioning control Positiomat 535 Stop roller conveyor 7000mm long, 300mm wide Aluminum stop adjustable via servo motor Simple positioning with chain dimensions Golevnq Rqjhcdwzjiw Additional feed roller conveyor with 5000mm long, 300mm wide, including adjustable side guide rollers. Both roller conveyors are electronically height-adjustable

Condition: new, Functionality: fully functional, Year of construction: 2024, Folding length 3020 mm Press force 320 t Infeed speed 140 mm/s Bending speed max. 10 mm/s Retraction speed 130 mm/s Y-axis stroke 400 mm Installation height 650 mm throat depth 450 mm free column passage 2555 mm Machine length 3785 mm Machine width 2290 mm Width without support arms 1740 mm total height 3100 mm Height of machine table 920 mm Motor power 22 kW Oil tank 300 l Machine weight 14450 kg (Data may vary depending on equipment) Standard equipment: 3 CNC axes (Y1, Y2, X) Double-guided press beam, stable and precise Stable back gauge, double-guided Stop fingers double-guided on linear guide Sliding front arms with height adjustment Side and rear protective covers Lower die adapter rail 60 mm Man. Top tool clamping system (Promecam system) Foot switch with emergency stop switch 380 V, 50-60 Hz, 3 phases Golhcdwouf Nr Aszsiw LED lighting Additional equipment: CNC control Delem DA 66t R-axis backgauge CNC controlled CNC controlled crowning Fiessler Akas 2M laser safety device 2 additional stop fingers (4 in total) 1 set of upper and lower tools - Further machining lengths and thicknesses are available with corresponding accessories! -

Condition: new, Year of construction: 2025, Semi-automatic sawing sequence with workpiece clamping-sawing-raising to set height after cutting is complete Stepless hydraulic cutting pressure and feed monitoring on the saw blade back. This ensures optimum conditions for every sawing task, i.e. constant pressure for solid material and constant feed for thin-walled profiles. Particularly suitable for universal use with different cross-sections, materials and frequently changing mitre cuts The machine control system complies with CE standard 89/289 Technical data: Cutting range in mm round/flat 90° 325/500 x 300 45° 300/300 x 300 30° 200/200 x 200 45° 300/300 x 300 Rapid traverse lowering of the saw frame via pushbutton to material edge Manual miter adjustment from 45°-90° - 30°, infinitely variable according to scale The miter pivot point is the intersection point between the saw blade and fixed clamping jaw, therefore no change in the length dimension when changing the angle position Hydraulic full-stroke workpiece clamping - CETOP hydraulic system The material is clamped in parallel at 90° for every angular position of the saw frame Complete coolant system with electric immersion pump Central machine operation Saw blade drive with limit switch Movable band guide arm, adjustment to material width Saw band deflection roller carbide guide Rotating chip cleaning brush Saw blade tensioning with torque wrench Paintwork silver-grey/ blue-grey (RAL 7001/ RAL 7031) Remaining piece length: 60mm Cutting speed: AC frequency-controlled drive 15-150 m/min infinitely variable on the control panel Drive unit Saw band 3,0kW ; 400V, 50Hz Hydraulics 1.1kW Gelhcdjt D Azcewzeiw Coolant pump 0.1kW Saw frame feed: Infinitely variable up to 300mm/min, hydraulically controlled Saw blade tension: Mechanical with torque wrench Saw blade dimensions: 4200x34x1.1mm Working height: 750mm (without set-up elements) Weight: 850kg Dimensions (LxWxH): 1450x2350x1350mm

Condition: new, Machine for grinding, deburring, rounding and polishing, manual, mobile use with vacuum system, alternatively also with magnetic system, starter kit and 1 brush CE-certified, designed with double emergency stop circuit and reset system Weight 445 kg Dimensions 1435x1100x1510mm high Working height 950 mm Work surface 1280x780 mm Minimum workpiece dimensions 20x20mm Maximum workpiece height 120 mm Gelhcdwjt Dpxbszjiw Maximum width of workpiece: unlimited length, with maximum width 780 mm Maximum workbench load 100 kg Operation: Double manual operation Number of work stations 1 Quick holder for brush M14x2 left-hand thread M14x2 right-hand thread for abrasives Brush design Disk brush Ø150mm with quick-change system Various brush variants possible, depending on material, we will be happy to advise you. Bia2Qk2S2I Brush power 0.75kW frequency-controlled motors Brush motor speed 150 - 1500 r.p.m. Workbench Carpet / Special friction design Vacuum system fixation in the workbench (standard) Vacuum system kW 2.2 kW Also available with additional magnets as an option (available from stock) Electrical values Voltage V 400 V (3L+N+PE) Frequency Hz 50 Hz Current A 10 A Power kW 6 kW Plug-in device CEE 400 V / 16 A (5-pole)

Condition: new, Year of construction: 2025, 2-column guided band saw in semi-automatic design with stepless mitre adjustment on both sides 30° - 45° - 90° - 135° With patented mitre system (ERP no. 0491120) Particularly suitable for universal use with different cross-sections cross-sections, materials and frequently changing miter cuts. Center of rotation remains unchanged at every angle setting, thus exact length measurement at 90° and in the miter area. MEBA Eco-Saw-Innovation 2000 The universally applicable MEBA 335 DG mitre band sawing machine is ergonomically perfected and has an optimum price-performance ratio. Simple central operation. The machine control system complies with CE standard 89/289 Technical data: Cutting range: round/flat 90° 335/500x335 45° right 330/305x335 30° right 180/170x335 45° left 305/305x335 Cutting speed: AC frequency-controlled drive 15-150 m/min infinitely variable on the control panel Drive unit - Saw band 3 kW ; 400 V, 50 Hz - Hydraulics 0.55kW - Coolant pump 0.11kW Saw frame feed: infinitely variable up to 300 mm/min, hydraulically controlled Saw blade tension: Mechanical with torque wrench Saw blade dimensions: 4400 x 34 x 1.1 mm Working height: 750 mm (without set-up elements) Weight: 1320 kg Bfpzm8E9K3 Dimensions (LxWxH): 1450 x 2350 x 1900 mm Subject to technical changes. Basic equipment of the MEBA 335 DG-500 Semi-automatic sawing sequence with workpiece clamping-sawing-up to set height after cutting is complete MEBA high-performance package: Infinitely variable hydraulic cutting pressure and feed monitoring on the saw blade back. This ensures optimum conditions for every sawing task, i.e. constant pressure for solid material and constant feed for thin-walled profiles. Manual mitre adjustment, digital reading with 0.1° accuracy Rapid traverse lowering of the saw frame via pushbutton up to the material edge Patented double mitre system (ERP no. 0491120) Unique double mitre bandsaw with which mitres on both sides can be set simply and economically by swivelling the saw frame and the material support. Automatic movement of the clamping vices and digital miter adjustment The material clamping vise moves automatically in the direction of flow according to the desired miter, so the material is always clamped at right angles, close to the saw band. The mitre pivot point is the intersection point between the saw blade and the fixed clamping jaw, which means that the length dimension does not change when the angle position changes. Hydraulic full-stroke workpiece clamping. Quick material clamping. The material is clamped in parallel at 90° for every angular position of the saw frame. Stable two-column linear saw frame Saw blade set at a 3° angle to the material support surface. Gelhcdet Dpw Rewzjiw Central machine operation Saw frame clearance height adjustment Movable band guide arm, adjustment to material width Saw blade deflection roller carbide guide Rotating chip cleaning brush Saw blade tension with torque wrench Operating instructions and spare parts list CETOP hydraulic system Coolant system (approx. 100 ltr.).

Year of construction: 2006, Condition: good (used), 3-axis / 5-sided machining with ISOLA soundproof cabin for aluminum, PVC and steel profile bars The machine has two processing zones and 2 tool magazines, which can be used individually in pendulum mode or both together for loading over the entire processing length (multi-part operation). The clamps can be positioned on the left and right independently of the processing head. Travel paths: X - axis: 7000mm Y - axis: 300mm (+ 113mm of the movable work table) Z - axis: 350mm P - axis: 3500mm (for left-hand clamp positioning) H - axis: 3500mm (for right-hand clamp positioning) 8 clamping elements (4 clamps per machining zone) 12 tool holders (6 holders per changer magazine/machining zone) incl. Gijlhcdjtp Ucmewzew Camplus software 2 angle heads

Year of construction: 2010, Condition: excellent (used), Functionality: fully functional, The QUADRA L1 consists of an automatic loading magazine and a gripper feed for profile lengths of up to 7500 mm. The feed transports the profile bar to the processing unit, which is equipped with 6 spindle motors and can carry out drilling and milling operations around the profile. The sawing module has 3 axes and is equipped with a saw blade with a diameter of 600 mm. The finished part is transferred from the machining area to the unloading table by means of an unloading unit, where it is transported to the unloading position by means of driven belts. The processing area is completely enclosed and can optionally be fitted with sound-absorbing mats. Gisljrpk Syjhcdwzow Automatic loading magazine with a maximum capacity of 15 profiles with a width of 100 mm. The profiles are transported to the gripper position by a belt conveyor. Automatic 3-axis CNC feed unit. Based on profile data, the unit positions itself in the pick-up position depending on the length and profile cross-section in order to feed the bar for processing. The gripper clamps the profile bar at a predefined position based on the drawing. A 600 mm saw blade enables a large cutting range to be covered thanks to the 3-axis movement option.