Used Finger Jointing Cutter for sale (5,318)

Condition: excellent (used), total width: 1,500 mm, total length: 3,000 mm, Panel press in very good working condition + Grecon finger jointing Gtjdpfx Agot Uduxobst

Condition: repair required (used), Dimter HK 400 finger-jointing line Gtedpevi Hw Nsfx Agbst Finger-jointing plant for timber packages Wood input lengths: 800-6000 mm Milling height: 285 mm (300 mm) Colour: blue Needs repair, sold as is in its current condition The plant has already been dismantled and is stored in the warehouse in Achern A lot of material for little money All technical documentation available We will also provide technical support and answer all your questions.

Condition: good (used), Year of construction: 2014, functionality: fully functional, pressing force: 20 t, GRECON finger jointing line Combipact 4 Manufacture year 2012 Pos. 107 Compartments packaging BF 4-600 / 1500 Pos. 115 Plug-in station ESTA-600 / 1000 Pos. 120 GreCon Combipact cutter CP-205 / 600 / 1000 Pos. 121 Graco glue pump (year 2022) Gtsdpfx Agex Tnt Esbjt Pos. 130 Conveyor belt FB-600 / 1500 Pos. 140 Cross thrust transfer / turning station ÜKS 240 / 600 / 1000 Pos. 150 Chain threading station EKK 240 / 4000 RE-K Pos. 160 Feeding station VE 205 Pos. 170 GreCon forehead press Conti A-20 / 6500 Pos. 190 Electric cabinet and control unit See PDF for full technical details

Condition: good (used), Year of construction: 2010, WEINIG NKT Finger Joint Cutter Double-Pack DP20 An industrial finger jointing line – engineered for maximum precision and efficiency Technical Specifications: Wood infeed length: min. 130 mm | max. 1000 mm Wood outfeed length: min. 3700 mm | max. 7400 mm Wood cross-section: min. 20 x 40 mm | max. 80 x 180 mm Cutter diameter: 370 mm Finger joint type: Vertical / Horizontal, 10/11 fingers, 3.8 mm pitch Glue application: 2-sided, PVAC white glue Connected load: 80 kW Gjdpfxjx Ti Rfj Agbstt Note: The machine is currently dismantled and stored at our site. Inspection is possible by appointment. Scope of delivery: WEINIG NKT Double-Pack DP20 incl. control unit Integrated glue station for two-sided application Operating manual & documentation

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: FSL-62H-FJ-420A, Furnimate Semi-Auto Finger Jointing Line, new 2019, very good working condition. Model: FSL-62H-FJ-420A Will accept Lengths from 300 to 1400m/m, x up to 180m/m high. Gedpfxeuaf Rde Agbstt Finger joint Unit with Cut off Saw, Scoring Saw & Profiling Unit for the Finger jointing operation. Auto feed with conveyor to Glueing and pressing unit, will take timber jointed up to 4500m/m long x 1400m/m wide. Gluing Press with Auto ejection of the glued panel. Show your mobile number for images on WhatsApp. Can be demo'd working in Sheffield, Yorkshire UK. Full documentation available. Photos etc, available on Whats App & email. Price ex. works, dismantled & loaded buyers transport: £35,000.00 + Vat if applicable, or Euro 42,000.00 ( make an offer as well )

Condition: refurbished (used), Year of construction: 2007, The line for joining PDFD in the single-milling version consists of two main devices: the DFC 60M milling-tenoner (where the ends of the battens are machined) and the PHSL longitudinal press, where the elements are joined into a batten up to 6.6 meters long. Width of input package for milling-tenoner – 650 mm Width of glued elements – 30 ÷ 155 mm Length of glued elements – 170 ÷ 900 mm Thickness of glued elements – 20 ÷ 70 mm Compressed air requirement 18 m³/h Godpfx Aow Hrm Negbott Operating capacity – cycles/min. approx. 2 (batten 6600) Length of glued element – up to 6600 mm The machine is in excellent technical condition!!

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Auction of a Weinig finger jointing machine! Gtodpfx Asx Rbl Nogbjt

Condition: new, Year of construction: 2026, machine/vehicle number: 2022-04, -wood entrance 300 - 3000 mm -cutting height max. 250 mm -wood rests and tools drive -Performance wood thickness 25 mm = 72 parts / min -Performance wood thickness 35 mm = 51 parts / min Finger jointing machine and lines are a masterpiece of the woodworking industry >simply the best fingerjoint system> Gtodscbyqfepfx Agbjt Delivery time approximately 10 months The manufacturer and supplier MINDA industrial plants

Condition: used, *Available from approx. end of 2025* Fully automatic finger jointing line for the following dimensions: Thickness: approx. 24 – 100 mm Width: approx. 80 – 240 mm Finger jointing length: 400 – 1,500 mm Finished length: 2.50 m – 13.50 m continuously variable Consisting of the following system components: - SMB vacuum destacking lengthwise with 2 lifting tables and 2 package roller conveyors, built in 2013 Package dimensions max. 1.20 x 1.20 x 6.00 m 4 suction pads Sicko system Separation and infeed into roller conveyor for scanner feeding, board turner, switch for too moist, too dry, switch for B-quality, marking station or automatic operation - Bidac end-face scanner for cupping detection, built in 2013 - Brookhuis moisture measurement FMI 5 Year of manufacture 2019 - Microtec scanner Goldeneye 502, year of manufacture 2012 with X-ray, 4 color cameras and new optimization software - Dimter-Opticut 350-2, year of manufacture 2003 with paddle ejector, year of manufacture 2009 and associated sorting belts and pneumatic ejector for 2 additional qualities - NKT packaging - NKT finger jointing system with turntable Spezialpack AH 1050, year of manufacture 2005 consisting of: Milling machine · Tipping station · Threading section length 5.0 m · Cyclic press length 6.00 m · Cross-cut saw - SMB stacking machine, year of manufacture 1998, 2.50 - 13.50 m length, divisible into 2 units (e.g. 2 x 5.0 m) 8 stacking arms, 8 stacking tongues, manually adjustable electro/hydraulic stop, package width: max. 1200 mm, package height: max. 600 mm, hydraulic package pusher Storage location: Customer Gsdpfovvi Tyjx Agbott

Condition: used, Working width from to 40-150 mm Working height from to 18-50 mm 0 6100 mm Finger jointing line Weinig Grecon Profijoint ----- Technical Specifications: ----- 1. Milling machine: ----- Material length at entry: 150-700mm Material width: 40-150mm Material thickness: 18-50mm Jointing options: horizontal and vertical joint Milling spindle power: 15 kW Gtedex H Alvspfx Agbst 2. Grecon PJ7/6100 Hydraulic Press for Joining: ----- Maximum length of finished element: 6100mm Material trimming saw Saw diameter: 350mm Cutting unit power: 2.2 kW Without tools (techncial details according to manufacturer, with gurantee)

Condition: used, knife: WP Z2 flight circle (ø): 125 mm Gtedpfx Agjwrrnwobst drilling: 40 mm length: 30 mm material: steel

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, feed length X-axis: 13,000 mm, feed length Y-axis: 240 mm, feed length Z-axis: 100 mm, feed rate X-axis: 25 m/min, pressing force: 40 t, input voltage: 400 V, total height: 1,120 mm, working height: 1,120 mm, milling spindle length: 330 mm, control voltage: 400 V, workpiece height (max.): 100 mm, tool diameter: 240 mm, rotational speed (max.): 6,000 rpm, air pressure: 7 bar, total length of planing tables: 13,000 mm, We offer a fully automated production line for the manufacture of KVH structural timber. The line is fully certified with CE marking and by the Wood Technology Institute in Poznań. Compliant with ENPN 14.081 and 14.081 standards 1. Angled discharge conveyor 2. Infeed table for visual wood grading 3. Buffer before defect cutting saw 4. Automatic defect cutting saw with camera for fluorescent chalk 5. Buffer before finger jointing machine 6. Finger jointing machine with glue applicator and cross-cut saw for lengths up to 13 m Gtedpfxsxfzyye Agbjt 7. Chain conveyor storage from finger jointing machine to four-side planer 8. Automatic infeed for four-side planer 9. Four-side planer Winter 6-33 10. Outfeed roller conveyor from four-side planer 11. Automatic packaging machine for planed timber 12. Chain conveyor 13. Strength tester for laminated timber

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Set for micro-dovetail jointing for high-volume and mass production Features: – Production line with the highest efficiency, – High-power working units, – High feed speeds, – Accelerated manipulative movements result in excellent output. Depending on the required capacity, additional buffer conveyors are installed to accelerate the production process. TENONING MACHINE FC-10KZ-6 Data Values Milling spindle 50 x 210 mm; 5500 rpm Spindle motor 18.5 kW Special chopper saw 300/60 x 8 mm Saw motor 6 kW Table working width 600 mm Stack height 30 to 150 mm PRESS FC-10PZ6 Gtodpfx Agox Idl Hjbjt Data Values Board width/thickness 30-150 mm / 20-70 mm Finished board length 6000 mm Line output up to 15,000 linear meters/shift

Condition: repair required (used), Year of construction: 1993, machine/vehicle number: 624/9, pressing force: 10 t, working height: 805 mm, total length: 1,900 mm, Cycle press for finger joints Gjdjt Sc T Ispfx Agbett Finger joint press Pressing force 10 t Wood width 80-300 mm Wood thickness 18-80 mm OPTIONAL with hydraulic unit

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Finger jointing line Grecon ProfiJoint Year of production: 2014 Technical condition: very good Gtjdpfxoxyq Nmj Agbet Technical data: Finished element length: 2100 mm For an additional fee, installation, start-up, and operator training are available. We also offer ongoing service.

Condition: used, knife: Reversible blade Z6 flight circle (ø): 100 mm drilling: 30 mm length: 55 mm material: steel Labelling: MEC Godpfx Agswu Nypobjtt

Condition: excellent (used), Year of construction: 2012, Set for finger jointing in medium and mass production. The machine is technically efficient and in good condition. Several sets of tools are included. Characteristic: – industrial set with one tenoning machine. Loading the package under the supervision of the operator enables the processing of inferior raw material, – sensitivity controlled by microprocessors /automatic control/, – turning the package after 1 treatment on the turntable (sharp connection) or turning the package on the back (furniture joint with a line; unique GOMA solution), – the set includes an automatic station for loading the press, – the possibility of using cuts on the press, Tenoner with feed table Data Values Milling spindle fi 50x210 mm Spindle speed 6000 rpm 18.5 kW motor Tool dimensions fi 250x160 mm The saw spindle aligns the face Special chipper fi 300x8 mm 6 kW / 3000 rpm motor Stepless feed table Working width x working height 600 x 30-160 mm Glue nozzle outline by tool PRESS FC-10 PZ6/2 Data Values Board width 30-160 mm Jufefe Board thickness 20-70 mm Gjdpelu D Tfsfx Agbett The length of the finished board is 6000 mm Pressing force 3 - 7.5 - 10 T Hydraulic power pack 3 kW / 140 bar

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2025/002, Finger jointing machines and lines are a masterpiece of woodworking industry >wood entry lengths 900 to 6100 mm< >wood rests and tools drive< Godpfocbyp Nex Agbjtt >Best tooth milling quality and optimized cutting speed< >Long service life of the milling tools / dovetail cutters< -MINDA - MACH I (patented) -High performance finger jointing line -for KVH / DUO / TRIO / BSH / GL / CLT -technical running meters capacity = approx. 150 m/min -vertical and horizontal joints possible max. 200 x 300 mm -extremely flexible; short set-up times; reliable operation The only package system in the world that can also process a single board or single beam. -finger jointing machine, for vertical and horizontal milling, zinc profiles, made in Germany, along with new developments in the clamping stations and the transfer channel on the router table, has the Joema MACH I include a groundbreaking benefits, fast pace. Together with 1200 mm milling channel at 40 mm Thickness technical power meter = approx 150 meters /min, very reliable material transport - No vulnerable conveyor rollers, flaps and cross conveyors - high availability - for all sections including square suitable - by fully automatic, continuous channel matching is possible in extreme cases single mill - thus the system is extremely flexible, vertically horizontally and zinc profiles possible performance with KVH 160 x 280 mm are 38 meters / min, with KVH 100 x 300 mm, 64 meters / min, at BSH 45 x 250 mm are 110 meters / min, >>cutting-edge technology simply kept

Condition: used, knife: WP flight circle (ø): 125 mm Gtedpfx Agst Stbcjbst drilling: 40 mm width: 60 mm material: steel

Condition: refurbished (used), pressing force: 10 t, working height: 805 mm, total length: 1,700 mm, Hydraulic finger jointing press (Keilzinkpresse), cycle press for finger joint connections, pressing force 10 t. For wood width 80–300 mm and thickness 18–80 mm. OPTIONAL: with 300 l hydraulic unit and 5.5 kW motor, manufacturer GOD, with electrical installation. Godpfot Sc Swjx Agbott

Condition: used, knife: WP-Z2 flight circle (ø): 125 mm drilling: 30 mm width: 40 mm Gtjdpfx Agjt Stbiebjt material: steel

Condition: refurbished (used), DKV III Throughfeed Press with Brake Unit Refurbished Available either with original hydraulic motors or converted to servo motors Options: - Chain threading device - Traveling cross-cut saw Function: For pressing finger joints without stops (in continuous operation). The upper and lower plate chains provide feed force. Following brake plates transfer the required longitudinal press force to the wood via friction. Advantages: - High output despite relatively slow feed rates - Absolutely no vertical finger offset at the joints Technology: Heavy-duty 2" plate chain, pneumatically lift/lowerable Floating brake elements Pressing force measurement via contact manometer Height adjustment electric Maximum pressing force adjustable and dependent on feed speed and wood cross-section, 4500 daN at 32 m/min 2200 daN at 70 m/min Gjdev T Aqyjpfx Agbjtt Feed speed adjustable 10-70 m/min Drive power Feed unit adjustment 1 kW Brake adjustment 1 kW Hydraulic motors 45 kW Technical data: Wood width 90 - 180 mm Wood thickness 20 - 80 mm Thickness-width ratio 6:10 Wood cross-section for 15/16.5 mm fingers max. 90 cm²

Condition: used, Year of construction: 2004, Compact semi-automatic finger jointing line consisting of: - PJ 150/500 milling machine - Transfer table for manual transfer - PJ 7/6100 li single-channel press Gtodpfxew Nbace Agbot milling machine: 2 packages / min Press: 2 beats / min Input length: 150 – 700 mm Final length: max. 6,100 mm

Condition: used, knife: WP Z2 flight circle (ø): 100 mm drilling: 30 mm width: 60 mm material: steel Godpfot Starex Agbett Replacement blades: On demand

Condition: used, knife: Z4 * 125x20x35mm, Gjdpfxelf I Hke Agbett * n max. 9,000 rpm, * MECH.