Used Finger Press for sale (13,427)

Year of construction: 2008, condition: reconditioned (used), Max gluing length 3m Minimum gluing length 1.5m Press in perfect technical condition The presse worked with Spanevello ARROW Klsdpfsk Uw Ukjx Ah Nsl

Condition: repair required (used), Year of construction: 1993, machine/vehicle number: 624/9, pressing force: 10 t, working height: 805 mm, total length: 1,900 mm, Cycle press for finger joints Finger joint press Pressing force 10 t Wood width 80-300 mm Wood thickness 18-80 mm OPTIONAL Ksdpjt Sc T Iefx Ah Noll with hydraulic unit

Condition: refurbished (used), pressing force: 10 t, working height: 805 mm, total length: 1,700 mm, Hydraulic finger jointing press (Keilzinkpresse), cycle press for finger joint connections, pressing force 10 t. For wood width 80–300 mm and thickness 18–80 mm. OPTIONAL: with 300 l hydraulic unit and 5.5 kW motor, manufacturer GOD, with electrical installation. Kedpfjt Sc Swox Ah Njll

Condition: refurbished (used), DKV III Throughfeed Press with Brake Unit Refurbished Available either with original hydraulic motors or converted to servo motors Options: - Chain threading device - Traveling cross-cut saw Function: For pressing finger joints without stops (in continuous operation). The upper and lower plate chains provide feed force. Kledpfxov T Aqys Ah Nsl Following brake plates transfer the required longitudinal press force to the wood via friction. Advantages: - High output despite relatively slow feed rates - Absolutely no vertical finger offset at the joints Technology: Heavy-duty 2" plate chain, pneumatically lift/lowerable Floating brake elements Pressing force measurement via contact manometer Height adjustment electric Maximum pressing force adjustable and dependent on feed speed and wood cross-section, 4500 daN at 32 m/min 2200 daN at 70 m/min Feed speed adjustable 10-70 m/min Drive power Feed unit adjustment 1 kW Brake adjustment 1 kW Hydraulic motors 45 kW Technical data: Wood width 90 - 180 mm Wood thickness 20 - 80 mm Thickness-width ratio 6:10 Wood cross-section for 15/16.5 mm fingers max. 90 cm²

Condition: excellent (used), total width: 1,500 mm, total length: 3,000 mm, Panel press in very good working condition + Grecon finger jointing Kledpfxet Uduxs Ah Nel

Condition: repair required (used), Year of construction: 1994, functionality: limited functionality, machine/vehicle number: 6305/7, pressing force: 15 t, working height: 905 mm, total length: 1,900 mm, pressing force 15 t line consisting of : feed rollers with servo drive press 15 t inclusive hydraulic unit feed rollers with servo drive Klodpfx Ajg T Spaoh Nel saw >>without electrical equipment

Year of construction: 2025, condition: new, Table dimensions 1000 x 400 mm pneumatic clamping 4 Stk. moveable ja_yes ja loading dimensions L x W x H 1200x800x1200 mm weight 220 kg For fast compression of Minizinken- or Softline compounds especially for larger cross-sections - Independent of the angle Kjdpfjx Ak Hqex Ah Noll - Especially suitable for arched manufacturing - Table size 1000 x 400 mm - Pneumatic connection 10 bar - Air consumption 1 cdm / stroke - 4 clamping cylinders for workpiece clamping - Pairs switchable - Right half of the table supported on hardened shafts through ball linear bearings - 2 pressure cylinder for linear table displacement, separately switchable - Weight: 200 kg - CE - execution (Technical details according to manufacturer - without guarantee.!)

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1300x800x1350 mm Weight 370 kg Total power requirement 0 kw Kodov A E Nkepfx Ah Njll

Condition: like new (used), functionality: fully functional, Year of construction: 2025, machine/vehicle number: PB12093N2025005, shaft diameter: 155 mm, empty load weight: 450 kg, Equipment: documentation/manual, Unused profile bending machine, year of manufacture 2025! TECHNICAL DETAILS Shaft diameter: 50 mm Roller diameter: 155 mm Kodpfx Ahex Tp N Uj Nell Capacity round diameter: 50 mm Shaft speed: 11 rpm Number of rollers: 3 pcs. MACHINE DETAILS Control: Conventional Power: 1.5 kW Dimensions & Weight Dimensions (L x W x H): 1,200 x 800 x 1,800 mm Net weight: 450 kg Transport packages: 1 pc. Operating hours: 0 EQUIPMENT Documentation CE marking CE certificate

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: HB10011N2025006, table width: 550 mm, table length: 300 mm, stroke length: 180 mm, pressing force: 28 t, empty load weight: 800 kg, Unused band bending machine, year of manufacture 2025! TECHNICAL DETAILS Capacity: 28 t Max. stroke: 180 mm Table width: 550 mm Table length: 300 mm MACHINE DETAILS Motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 1,300 x 800 x 1,400 mm Net weight: 800 kg Transport packages: 1 piece Klodpfex Tp E Ajx Ah Njl Operating hours: 0 EQUIPMENT Documentation CE marking CE certificate

Condition: like new (used), Year of construction: 2025, functionality: fully functional, throat depth: 1,100 mm, pressing force: 100 t, table width: 300 mm, table length: 1,500 mm, stroke length: 380 mm, Unused hydraulic press, year of manufacture 2025! TECHNICAL DETAILS Capacity: 100 t Max. stroke: 380 mm Throat depth: 1,100 mm Frame gap: 100 mm Kjdpfox Tp Abex Ah Noll Height adjustment: 750 mm Table length: 1,500 mm Table width: 300 mm Number of columns: 2 MACHINE DETAILS Motor power: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 1,450 x 800 x 2,200 mm Net weight: 970 kg Transport packages: 1 EQUIPMENT Movable press cylinder Documentation CE marking CE certificate

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 60 t, stroke length: 380 mm, table width: 260 mm, table length: 1,000 mm, throat depth: 750 mm, Unused hydraulic press, year of manufacture 2025! Klodpfxex Tpy Tj Ah Njl TECHNICAL DETAILS Capacity: 60 t Max. stroke: 380 mm Height adjustment: 750 mm Throat depth: 750 mm Adjustment length: 100 mm Table width: 260 mm Table length: 1,000 mm Number of columns: 2 MACHINE DETAILS Motor power: 2.2 kW Dimensions & Weight Dimensions (L x W x H): 1,100 x 800 x 2,200 mm Net weight: 540 kg Transport packages: 1 EQUIPMENT CE marking CE certificate Documentation

Condition: used, Year of construction: 2003, pressure 400 t distance between columns 1060 mm stroke 450 mm no. of strokes 15 - 30 /min distance table/ram, max. stroke up, adjustment up 1160 mm table surface area 1000 x 700 mm capacity of ejector in table 2 x 16 t Kledpjvzxpuofx Ah Nol ejector stroke of ejector in table 125 mm Die cushion pressure in table 120 t Die cushion stroke in table 2 mm capacity of ejector in ram 2 x 4 t stroke of ejector in ram 100 mm ram surface 1000 x 700 mm column travel -side 630 mm power capacity 55,0 kW weight 50,0 t year of manufacture 1986 - overhaul 2003 multi-station press with automatic parts feed, Transfer, drawing cushion in table (2. stage) as is where is, WITHOUT putting into operation, stored in dismantled condition

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F Kjdpfx Asvuuknoh Nell

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Xerox Versant 80’ colour production system. Item for sale: 1 x Xerox Versant 80 with the following equipment: Kljdpfx Ahjx S D Ipe Nol Includes Fiery Controller E200-08 Includes Paper Deck A-CF03 Includes Booklet Finisher Includes Squarefold / Front Trimmer Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 1,016,110 pages Colour: Approx. 865,654 pages Black: Approx. 150,456 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: used, Year of construction: 2025, total height: 2,100 mm, total width: 800 mm, total length: 2,200 mm, Empty weight: 1.145 kg Price: On request Kledexb Scwspfx Ah Njl - Year: 2025 - Documentation available: No - CE marking present: Yes - CE certificate present: Yes - Serial number: PPW10061N2025009 - Motor power: 3.0kW - Table width: 300mm - Throat depth: 1500mm - Table length: 1500mm - Ram width: 120mm - Ram length: 120mm - Model: Hydraulic - Max. stroke: 380mm - Number of columns: 2 - Height adjustment: 750mm - Power: 100.0ton - Transport dimensions: 2200mm x 800mm x 2100mm (l x w x h) - Transport weight [kg]: 1145kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, machine/vehicle number: 1591, Industrial flatbed heat press COMAS Tipo 85, suitable for sublimation printing, lamination, or thermal transfer on textiles, films, and composite materials. Kljdsxryyljpfx Ah Nol The machine was purchased but never put into operation. It has been stored in a dry environment and is in good physical condition. Equipped with VAHLE KEK 5/60 power feed system (industrial conductor rail). Heavy-duty construction, ideal for workshops or small production facilities needing reliable thermal pressing capacity.

Condition: like new (used), Year of construction: 2024, operating hours: 2 h, functionality: fully functional, total height: 2,120 mm, installation height: 2,120 mm, total width: 1,000 mm, throat depth: 695 mm, operating speed: 12 mm/s, overall weight: 1,200 kg, reverse speed: 9 mm/s, pressure: 12 bar, Hydraulic press Profi Press automatic 60 Tonnes single phase hardly used Technical specifications Pressure force [kN]: 600 Maximum pressure [bar]: 259 Piston stroke [mm]: 380 Oil capacity [dm³]: 38 Working speed [mm/sec]: 2,87 Approaching speed [mm/sec]: 9,5 Return speed [mm/sec]: 12 Motor power [kW]: 2.2 Voltage [V]: 400/3 Frequency [Hz]: 50/60 Working width [mm]: 750 Weight [kg]: 540 Diameters Kodpfx Ajx Dzfaeh Njll Inside diameter of cylinder [mm]: 170 Diameter of piston rod [mm]: 75 Diameter of piston head [mm]: 100 COLLECTION ONLY FROM MANCHESTER Payment on collection No Vat . Features of this workshop press (60 ton M/H-2) Integrated pressure manometer Pressure regulation Hydraulic unit with a 2-speeds handle In height adjustable working table Joystick for the control of the piston Hand pump for precision pressing Optional accessories Movable cylinder Foot pedal, two-hands operation or hand remote controller V-block set for extra support Mandrel set / Pressure pins Digital stroke read-out Table plate / pressing table Protection screens (customisable) Dimensions in mm A: 2120 B: 1000 C: 695 D: 750 E: 260 F: 1315 G: 150 H: 197 I: 750 J: 805 K: 200 NO VAT ! , no vat added.

Condition: good (used), Bookbinding Press 50×40 with Base The machine is fully operational and ready for use. Format: 500×400 mm Kjdpfx Aex N D Tyjh Nsll Pressure: 5 tons

Condition: ready for operation (used), Year of construction: 2002, Extruders and oil screw presses for soybean processing, obtaining oil and soybean cake. There are two extruders and two presses. One extruder and one press work in tandem and form a pressing line. The motor power of the press is 22 kW and the power of the extruder is 55 kW. the capacity of one line is 500-800kg/h Kedjtxinaspfx Ah Noll The price refers to one line (exstruder+press)

Condition: used, With this offer, you are purchasing a used manual transfer press ‘Lotus LTS 150 B from 2023’. Item for sale: 1 x Lotus LTS 150 B with the following equipment: Includes DTF gel oven Year of manufacture: 2023 Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! Klsdpfjx Eg Upsx Ah Nol For more information, please feel free to contact us personally.

Condition: good (used), Proofing press 55x65cm Antique The machine is in very good condition, can be used as an exhibit or as a printing machine. Max. format 550×650 mm Weight 650 kg Kledpfx Aju Umaish Nol Flow table, system of claws holding the sheet. Electrically driven spreading roller.

Condition: good (used), Letterpress printing press, foot operated Made in Germany Klodpfx Asvac S Deh Njl Fully original machine. A brilliant looking exhibit to put in a company lobby. A manually added piston. Rollers Format of the pressure 35x24cm

Condition: good (used), Columbian Press 1858 Letterpress Manufactured in Great Britain by Henry Watts Kodpfxevbb Slo Ah Nell Year of manufacture 1858. Can be used as a work machine or as a museum exhibit.

Condition: used, Year of construction: 1975, functionality: fully functional, Eccentric press, 5 ton eccentric press, for sale in excellent condition Kljdpfjuf Av Usx Ah Nol pressing force: 5 tons table size: 260x210 mm stroke length: 130 mm 3kW, 400V 50Hz