Used Filtration Device for sale (13,777)

Condition: good (used), Year of construction: 1999, The filtration system is used to filter oil (rapeseed, sunflower, soybean oilseeds and others). The system is made to work automatically, it has a command unit that manages the pneumatic valves, and with the help of sensors it controls and manages the work. The system includes a control unit, a piping system with fittings and valves, and a SS filter body. Hsdetxc Hpepfx Afiefn Automatization is completely new and never used!

Condition: used, AR Filtration ARNO-2VF-YA & PRF-K23 Filtration Units. Country of Origin: Italy Location: This lot is located in Bornago, Italy. Hsdpfx Afjxnl Awoiefn

Condition: used, Year of construction: 2020, operating hours: 500 h, functionality: fully functional, machine/vehicle number: DSF-1020 SS, TIMEX Filtration System: TIMEX DSF 1020 SS Drum Stripper Filter Filter Model: TIMEX DSF 1020 SS Drum Stripper Filter Filter Type: Frame Type Flange Standard: EN 1092-1 (DIN2576) PN10 Application: N/A Service Fluid: N/A Capacity: 30 m3 /h Quantity: 1 Unit Inlet TSS N/A Filtration Degree: 2000 µ Filtration Area: 6 m² Drum Diameter / Length: Ø1000 mm / L: 2000 mm Inlet & Outlet Connections: DN150, PN6 Flanged Drain Connection: DN50, PN6 Flanged Working Pressure Min/Max: by Gravity Max. Operation Temp: 55oC Operation Temp: N/A Gearbox Motor Power: 1.1 kW* Required Voltage: 400 V AC / 50 Hz / 3Phz Filter Body / Pipe / Flange Material: SS316L Stainless Steel Filter Screen Material: SS316L Stainless Steel Hfedpfxerf U Enj Afion Cleaning Mechanism: Compressed Air + Water Accessories * Control Board (Std.)

Condition: used, functionality: fully functional, Total flow of clarified water through PF 1 – 5 or PF 6 – 9 is 400 m³/h. Filter diameter: 3,000 mm Filter media - type PR 1 – 1.6 - Grain size: 1 – 1.6 mm - Bed height: 1,100 mm Operation: Maximum filter capacity: 100 m³/h Hfjdjxcnaujpfx Afisn Filtration rate: 14.3 m/h Backwashing: Backwash water flow: 70 m³/h Upflow velocity: 10 m/h Backwash air flow: 385 Nm³/h The PF units are divided into two sections: PF1-5 (old installation) and PF6-9 (new installation). Only one section operates at a time according to operational requirements. The overall workload is approximately balanced, so each section runs about 4,400 hours annually. The sand filters are regularly backwashed after each operational cycle (80 hours) or when the pressure loss reaches ΔP 25 kPa. The system is fully operational. PF Reconstruction: PF1-5: 10.11.2015 – complete replacement of sand, nozzles, and shell surface maintenance PF6-9: 13.7.2018 – complete replacement of sand, nozzles, and shell surface maintenance.

Condition: good (used), Year of construction: 2014, functionality: fully functional, volume flow: 1,000 m³/h, total width: 1,020 mm, total length: 1,680 mm, total height: 2,460 mm, overall weight: 1,540 kg, operating pressure: 10 bar, input voltage: 400 V, power: 14.2 kW (19.31 HP), 1 heat-regenerating compressed air adsorption dryer. The dryer was in use from 2014 to 2017. The system has been out of operation since 2017. The compressed air came from an oil-free Atlas Copco ZR3 compressor with 132 kW. Manufacturer: Donaldson Filtration Deutschland GmbH Type: HRS 1000 Year of construction: 2014 Volume flow at 7 bar: 1000 m³/h (16.66 m³/min) Connection: DN 80 Installed power: 14.2 kW Dimensions length / width / height: 1680mm / 1020mm / 2460mm Weight: 1540 kg Desiccant bottom (20 cm): 3 mm activated aluminum oxide Hfedpfx Afor A El Eeisn Desiccant middle (40 cm): 2 mm activated aluminum oxide Top desiccant (rest up to the top) silica gel as a ball. The desiccant is already disassembled and immediately available. The desiccant was sucked out of the container with a vacuum cleaner and packed separately in airtight bags. The desiccant is still in a usable condition. It is not oily or soiled. There is the possibility of external re-drying. The TÜV has inspected the inside of the containers and an expert opinion is currently being prepared. "Loose adhesion on the lower part of the dished end" (pictures to follow)

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, filter area: 65 m², volume flow: 6,574 m³/h, Complete unit: cyclone on feet + fan + rotary valve + piping + electrical cabinet. Hodevdtxcopfx Afiefn Treated air flow: 6,574 m3/H Filter surface: 65 m2 Filter media: Antistatic polyester 550 g/m2 + oleo/Hydro OWR treatment New equipment, never assembled, new price 35 K€.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 400 kW (543.85 HP), Ore Beneficiation Plant for Nickel, Copper, Zinc, Graphite, Gold, Silver, Chrome, Quartz/Silica In today’s competitive mining and metallurgical industry, maximizing ore value is critical. Our state-of-the-art Ore Beneficiation Plant offers a complete solution designed to increase the content and quality of raw ore, transforming it into a marketable product ready for further processing or direct sale. Engineered for a wide range of minerals—including nickel, copper, zinc, graphite, gold, silver, chrome, and quartz/silica—our ore beneficiation plant delivers exceptional performance, efficiency, and reliability. Introduction Mining operations around the world face the challenge of processing ores that are often low in grade and require extensive refinement to be economically viable. Beneficiation—the process of increasing the concentration of valuable minerals—plays a vital role in reducing operational costs, enhancing recovery, and ultimately, ensuring profitability. Our ore beneficiation plant, also known as an ore processing plant or mine dressing plant, integrates advanced technology and robust engineering to deliver an efficient crushing, grinding, classifying, and separation process. Designed to handle a wide variety of ores, our plant is the ideal solution for mining companies looking to optimize their extraction and processing operations. Whether you’re processing nickel, copper, zinc, graphite, gold, silver, chrome, or quartz/silica, our plant provides the versatility and performance needed to meet today’s rigorous industrial standards. ## What Is an Ore Beneficiation Plant? An ore beneficiation plant is a facility where raw ore is processed to improve its quality and increase the concentration of valuable minerals. The plant typically includes several stages of processing: 1. Crushing: The raw ore is reduced in size to allow for more efficient downstream processing. 2. Grinding: Further size reduction to liberate the valuable minerals from the waste material. Hfodpfx Afjq Nw Uqjijn 3. Classifying: Separation of the ore into different size fractions using screening and hydrocyclones. 4. Separation: Employing various physical processes such as magnetic separation, flotation, or gravity separation to concentrate the valuable minerals. 5. Dewatering: Removal of excess water to prepare the concentrate for further processing or shipping. This integrated process not only boosts the metal content but also minimizes waste, thereby improving overall cost efficiency and environmental sustainability.

Year of construction: 1992, condition: good (used), Container turning device, welding turning device, welding turning device, welding device, welding turntable, welding turntable and tilting table, welding turning device, welding turntable tilting table -Manufacturer: Commercy Soudure, welding rotating device swiveling -Type: PM 250 -Load capacity: see photo nameplate -Control: with foot pedal -Three-jaw chuck: Ø 314 mm, bore Ø 100 mm, base plate Ø 600 mm -Speed: max. 3 rpm right/left rotation -tiltable: via crank Hodeq Ei A Tepfx Afisfn -Transport dimensions: 1190/720/H900 mm -Total weight: 267 kg

Condition: good (used), used copying unit Copymat, type 1301A2 Hjdpfx Aoipibqsfisfn

Condition: excellent (used), Precision CNC tool presetting and measuring device from renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, as well as Heidenhain ND1202T Tool-Chek electronics. Very good condition, complete and fully operational unit. Technical specifications and features: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Display system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optical system with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • X/Z axis measuring range: up to approx. 400 mm • Axis control from KELCH control panel (joystick + function keypad) • Digital readout, menu in German and English • Complete with original documentation and all connectors Condition: • Used, fully functional • Very clean example from a German toolmaking shop • All axes move smoothly, screen responds correctly • Ready for work Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools prior to mounting in CNC machines. The optical system with Pico LCD display allows for measurement of tool length, diameter, and geometry in visual mode. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools. Hodpfoxn Ax Aox Afiefn

Year of construction: 2017, condition: like new (used), MMM Uniclean® PL II 15 single chamber washer-disinfector (Mint condition, year of manufacture: 2017) Product description (Source: MMM) Powerful single-chamber washer-disinfector for thorough reprocessing of large quantities of medical devices such as general surgical and MIS instruments, anesthesia materials, ophthalmic and dental surgical instruments, containers, bowls, trays, surgical shoes and other utensils. Operating convenience Loading baskets can be conveniently loaded from all four sides. Easy-Move casters: Even heavy baskets can be moved easily with little effort and positioned precisely in the chamber. Glass control panel - easy to clean Rubberized CoolTouch handles allow even hot baskets to be touched. Frame and front panel made of stainless steel 1.4301 (AISI 304) Chamber and all fixed piping in contact with the product in AISI 316L Glass doors in double glazing with securized glass Hfjdpfx Asimdtvefien Glass panel with integrated 5.7" color touch screen on loading side Large residual run indicator and door switch on the unloading side TECHNICAL DATA Model: Uniclean PL II 15-2 EL ( = Electric, not external steam) Single or double door: Double door Voltage: 380 - 400 V / 50 Hz Heating: Electric Equipment Machine Deionized water preheating tank (tank 1) Deionized water recovery tank Sound insulation machine front (tank 2) Sound insulation front of machine Sound insulation side wall Exhaust air economizer Exhaust air draft breaker Conductivity measuring system Monitoring Hepa-Filter Potential free contacts Return air locks Median connection on site Hot water connection Dosing system Suction lances 3 pieces 3. dosing pump incl. accessories Roller conveyor Semi-automatic transport Basic module Automatic roller conveyor Automatic loading roller conveyor preparation Automatic unloading roller bank preparation Batch documentation and machine connection Barcode reading system UPL II (cable) Barcode reader for basket recognition For the correctness, completeness and topicality of the data we do not take over guarantee.

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. High extraction capacity with low space requirement Maximum performance in this class Very quiet Range of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter Hfjdpecnw U Defx Afijn Can also be used for several dust sources High-quality, sophisticated construction Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, thus flexible in use Large inspection openings Large-dimensioned, mobile spill container with clamp and spill collection bag unit already completely assembled at delivery, therefore quickly usable mobile Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminized, washable and therefore with long service life Filter standard in antistatic design tested and approved according to category M-BIA Filter resistance monitoring via differential pressure box, adjustable with warning lamp on the control box The fan is connected downstream of the filter Equipment details: With innovative locking device for safe container positioning All units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan wheel Inspection opening

Condition: used, machine/vehicle number: 46-1056, overall weight: 52 kg, This inductive shrink fit device SECO-epb EasyShrink 20 is being auctioned online in our industrial auction/machinery auction for mechanical engineering companies – machinery park clearance & restructuring. Hodpfoxnqi Nox Afijfn

Year of construction: 2015, operating hours: 13,660 h, condition: used, filter area: 18 m², negative pressure: 2,000 Pa, suction capacity: 13,000 m³/h, Oil mist extraction unit for workshop halls – Plug & Play filtration tower designed for extraction of coolant and lubricant emissions in industrial halls. IVAT Ölnebel-T13K filtration and ventilation tower. Hedoxnlwzopfx Afiefn Ideal for aerosols, oil mist, emulsion mist, and vapor extraction. Industrial hall filtration ventilation – suitable for numerous technological processes in manufacturing plants, particularly in metalworking operations. Very often, extraction systems with coolant recovery installed directly on machines are insufficiently effective or simply not present. Machine retooling, frequent opening of machine enclosures, or lack of enclosure at machining heads causes oil mist to escape from machine areas, exposing workspaces and personnel to harmful mist and vapors. Installing a filtration tower significantly improves air quality at workstations and should be considered an ideal filtration and ventilation supplement for halls where fully isolating oil mist using coolant recovery devices is either impossible or very difficult to achieve. Equipped with automatic air and temperature control for the workspace. An innovative PLC control system monitors data and detects threshold exceedances at the workplace, ceiling heat-up, and automatically regulates temperature and air quality. Performance: up to 13,000 m³/h Vacuum: 2000 Pa Filtration area: 18 m² Fan power: 7.5 kW Year of manufacture: 12/2015 Operating hours: 13,660 Stock number: 1054

Condition: used, Container size approx.: 0.7 x 1.3 x 0.14 m Hfsdpfx Aoxnliwjfijn Container volume approx.: 110 liters

Condition: excellent (used), Device for precise setting, measurement, and inspection of CNC cutting tools. Equipped with an EZset optical camera system and EZvision (Image Controller 1) software. Condition: very good, complete, ready for operation. Technical data and features: • Model: PRECIsset 400 • Measurement system manufacturer: EZset GmbH & Co. KG, Germany • Control screen: Image Controller 1 • Software: EZvision • Documentation version: 1.1.1 (18.08.2006) • Measuring range X / Z axes: up to 400 mm • Camera with image processing system • Edge, length, and tool diameter measurement function • Results can be saved and printed • USB and RS ports • Power supply: 12 V DC, 40 VA • Year of manufacture: approx. 2018–2019 • Supplied with original PRECITOOL technical documentation Condition: • Used, fully functional • Screen operates correctly • Longitudinal/Transverse axes reference correctly Hfedoxn Awxepfx Afion • Well-maintained unit from a German tool shop Functional description: The PRECIsset 400 enables fast and repeatable tool setup prior to CNC machining. The EZset vision system allows for blade geometry analysis and tool wear inspection. High measurement accuracy ensured by a stable column and industrial-grade optics.

Condition: used, Year of construction: 2015, Serial number: 15037991278R / 1407713xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18748 Specifications: - 2015 model - Type: SEHK300 - Slightly used - Remote control with bluetooth - Lifting capacity: 30,000 - Ready for delivery Description: 2015 Suxxesion pipe spreader in good condition. Flies with a number of pipes and extra equipment (see pictures). Ready for delivery.   Hodpfx Afevgyd Rsisfn

Condition: new, Year of construction: 2025, Description: IE 3 motor standard max. volume flow up to 8.500 m³/h at the fan approx. 73 m² filter surface, residual dust content according to H3 Pre-separator standard 71 dB (A) at full load (according to DIN EN ISO 11201) already complies with prEN 16770 Optional: Models with type-tested rotary valve (FSA) Tested back pressure flap Integrated automatic venting system Intake port: 350 mm Nominal motor power: 11 KW Voltage: 400 V/ 50 HZ Max. volume flow: 8500 m3/h Nominal volume flow: 6927 m3/h Negative pressure at Vnom. 2765 Pa Filter area: 73 m2 Spa collection volume: (net/gross) 3x165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (LxWxH) 3112 x 1058 x 2351 mm Hfodpfxecqy I Sj Afion Weight: 1074 kg Location: in stock 54634 Bitburg

Condition: good (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1504023, total width: 2,800 mm, total length: 8,000 mm, total height: 2,800 mm, overall weight: 15,000 kg, tank capacity: 1,000 l, TECHNICAL DATA & FEATURES: Oil and coolant treatment system Hfedpfx Afoxm Twgsien Load capacity: 20,000 kg NOTES ON COLLECTION: Note: The system will only be available from calendar week 3, 2026 onward FCA Winterlingen, loaded onto truck

Condition: used, Year of construction: 2021, operating hours: 177 h, Please contact ATS Norway for more information Please provide reference number upon request: 19184 Specifications: - Hours: 177 - 90 km - 8-wheel drive? - Good tires - Automatic box - With front screen - Lots of extra light - Radio/Cd Hjdovg At Ispfx Afiefn - Climate/ac - Diesel - With belts Worl Power Er-180 000L-8 crane 180 t/m from 2016   Superstructure: - Supportlegs - Extra light - Quick attach - Reversing camera - Central grease Hours: 177

Condition: good (used), Year of construction: 2009, Manufacturer BIESSE Hjdpfx Ajwmr Tvsfiefn Model UNICLAMP Machine type: Mechanical clamping system Year of manufacture: 2009 Item number: 7350171 Technical specifications Quantity: 5 Clamping height: 15 - 55 Height: 48 mm, with quick-release coupling Suitable for Biesse Additional information * Sales unit includes 5 used Uniclamp clamping elements * Clamping elements for clamping strips, suitable for Biesse console tables with ATS Location: From stock, 54634 Bitburg - Available immediately -

Condition: excellent (used), Year of construction: 2020, Pneumatic Double Diaphragm Pump Cobra 40-10 Top condition – Year of manufacture: 2020 Its unique design enables low-pulsation operation. Consistent paint flow for a perfect spray pattern and highest surface quality. Ideally suited for processing shear-sensitive and moisture-sensitive materials. Minimal shear forces – ideal for processing, e.g., UV coatings. Ideal for handling small material volumes and frequent color changes. Scope of delivery: Basic unit on frame, HD double hose 7.5 m, upper container 5 l Ex, AirCoat spray gun AC 4600 Professional including red air cap and holder, AirCoat nozzle ACF 3000 11/40. Technical Data: Hodsxdtkujpfx Afiofn Ratio: 40:1 Displacement per double stroke: 10 cm³ Flow rate at 200 double strokes: 2 l/min Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg Extremely low hours of use –

Condition: new, Year of construction: 2025, Al-Ko clean air dust extractor year 2024 Exhibition piece - Immediately available Absolute special price Technical data Power Unit 250 P Intake manifold: 250 mm Rated motor power: 6.5 kW / 3 Ph Voltage: 400 V / 50 Hz Max. volume flow: 4900 m³ / h Nominal volume flow: 3524 m³ / h Hsdpfxscdy I Rs Afisfn Negative pressure: 2451 Pa Filter surface: 22.4 m² Sink collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, Clean Air Dust Collector RLA 160 For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft For wood shavings and dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with minimal space requirements Maximum performance in this class Very quiet Area of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter Can also be used for multiple dust sources High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bags System delivered fully assembled, allowing for quick deployment Mobile Filter description Ultra-compact with maximum filter area Filter material made of polyester fleece Aluminum-coated, washable, and therefore with a long service life. Filter comes standard with an antistatic design, tested and approved according to category M-BIA. Filter resistance monitoring via differential pressure cell, adjustable via a warning light on the control box. The fan is installed downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan impeller. Inspection opening for cleaning the bypass filter. 5 m connection cable with 5-pin CEE plug and phase inverter. 2 fixed and 2 swivel casters with parking brake. Manual cleaning. Model RLA 160 Item no. 5131620 Technical Specifications Intake manifold diameter 160 mm Nominal flow rate 1448 m³/h Max. flow rate 2400 m³/h Valve pressure at Vnenn 2247 Pa Filter area 9.21 m² Filter material dust class M Residual dust content H3 (< 0.1 mg/m³) Hfsdpfx Ajcnw T Ijfijn Filter cleaning Compressed air supply Chip collection volume 2 x 193 l Mains voltage 400 V Mains frequency 50 Hz Motor power 2.2 kW Max. sound pressure level 73 dB(A) Dimensions (length x width x height) 1681 x 830 x 1654 mm Weight 254 kg Location: Ex warehouse 54634 Bitburg

Condition: excellent (used), Year of construction: 1998, Used Scheppach RG 4000 dust extractor - dust-tested Technical specifications Hose length: 2500 mm Hose connection diameter: 100 mm Motor power: 1.5 kW, 50 Hz / 400 volts Mobile Extraction drum Availability: Immediately Storage location: 54634 Bitburg Hsdpfxswb Hqxe Afijfn