Used Suction Filter for sale (9,575)

Condition: used, Chip dust suction filter, with automatic filter cleaning (wash control with blowers and Macair panel) at 1 bag. Kljdpfx Ajtxdpxsh Eju Motor-powered lathe, optional Euro 500 + VAT Suction motor power:: Kw. 4 Filtration size: Main tube mouth mm. 250, deviations mm. 150 each

Year of construction: 2016, condition: excellent (used), machine/vehicle number: 216 105, BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Equipment / Additional information: Roots Blower Kljdpfehqmghsx Ah Eou Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 500 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL

Condition: good (used), Clean air extraction system Used machine, in good condition Images to follow mobil Jet 160, Connection 160, Fan 2.2 kW Air flow rate 1850 m³/h, 400 V Kjdjrb D Nopfx Ah Eslu

Condition: used, 2-bag suction filter, used. Kodpfx Aey S Acrsh Eslu Filtering with 21 sleeves diameter 20 cm, length 240 cm Vacuum cleaner motor with inverter, approximately 2-3 kW.

Year of construction: 1996, condition: used, functionality: fully functional, machine/vehicle number: NF-1706/2896, A Novotecnic candle filter system utilizing the precoating principle is available for the treatment and purification of grinding oil. Operating fluid: grinding oil, flow rate: 50 l/min, tank capacity: approx. 800 l, control: Siemens PLC. Documentation available. On-site inspection possible. The filter system was used in our facility to filter carbide from the coolant oil during tool grinding. Since the system is equipped with a drying unit, the carbide powder could be marketed effectively. Klodpoy Sw Rqjfx Ah Eeu

Condition: good (used), Year of construction: 1994, functionality: fully functional, space requirement height: 2,440 mm, overall weight: 1,480 kg, pressure: 2 bar, total width: 1,300 mm, total length: 1,850 mm, total height: 1,650 mm, filter area: 0.75 m², operating temperature: 200 °C, Enamelled steel filter nutsche Estrella AG, Switzerland Capacity: 760 litres, filter nutsche, suction nutsche, pressure filter Year of manufacture: 1994 Documentation: complete Operational condition: fully functional Diameter: 1000 mm Filter area: 0.75 m² Permitted operating pressure: -1/+2 bar Permitted operating temperature: -10/+200 °C Kledpfx Aeu U Afujh Eeu Support structure: upright on legs with subframe Opening: hydraulic opening assistance Enamel quality: blue colour, Email 2000 Estrella Total volume: 760 litres Overall height open: 2440 mm Height closed: 1590 mm L x W: 2000 x 1300 mm

Condition: new, Year of construction: 1985, Blow-in diameter: 300mm Ksdpfxourv Hbs Ah Ejlu Spähesacks: 4 Filter area: 16 Filter cleaning: manual Dimensions: approx.: 1900 x 670 x 2800 mm (L x W x H)

Condition: ready for operation (used), Year of construction: 2019, Two Ivat filter towers for dust and smoke with temperature control and nanofilter are available. Air volume flow: 22000-25000m³/h, motor power: 18.5kW, max. separation efficiency: 99.95%, filter area: 120m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 2000mm/1500mm/3000mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Kjdpfx Ahjyvuvlj Eolu

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. Klsdpfjwc Nrnjx Ah Eju The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: ready for operation (used), Year of construction: 2009, A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible. Kodexl Elgjpfx Ah Eolu

Condition: excellent (used), Suction & Filtration Trolley Manufacturer: Anton Metzger Model: MKR 400 S Capacity: 400 liters Technical data, see photo Documentation available Klodpfxjw Avzpj Ah Eju Length: 2650 mm Width: 800 mm Height: 1440 mm Weight: 610 kg

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy. Kledpfx Asdrtaleh Eeu

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Klsdpfx Aholxyhfj Eeu Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Year of construction: 1991, condition: excellent (used), Candle filter VelaCart B750, manufactured by Seitz-Filter-Werke Type: VELAcart B750 - 16H07 DN 080 Year of manufacture: 1991 Manufacturer's serial number: 1992 Filter element: Candle Volume: 105 liters Clamp screw type: M20 x 85 A2 (10 pieces) Candles: Quantity: 16 pieces Length: 73 cm Mesh size: 5 x 3 mm (length x width) Container: Ksdpfefbckusx Ah Eolu Permissible operating overpressure (bar): Liquid 10 / Gas 10 Permissible operating temperature (°C): Liquid 85 / Gas 85 Dimensions: Height: approx. 1.78 m Width: approx. 56 cm Weight: approx. 150 kg In very good condition!

Condition: good (used), Year of construction: 1987, functionality: limited functionality, machine/vehicle number: 63526, overall weight: 1,200 kg, operating temperature: 220 °C, year of last overhaul: 2022, For sale: Pfaudler Balfour filtration Nutsche, volume 300 L. Glass-lined reactor, jacketed, in working condition. Sales price 24,000 Euro, ex works. Can be inspected onsite in Zofingen, Switzerland. Klsdpfsy Igzkox Ah Eou

Condition: ready for operation (used), Year of construction: 2014, A Polo slant bed filter with vacuum filter endless belt design and enlarged storage tank is available. Capacity: 5000l, max. operating temperature: 60°C, flow rate per minute emulsion/oils: 650l/200l, dirt chamber capacity: approx. 400l, vacuum chamber capacity: approx. 140l, connected load: 5kW. Filter unit dimensions X/Y/Z: approx. 2450mm/1650mm/1550mm, filter unit weight: approx. 1150kg, total weight: approx. 3000kg. Documentation available. An on-site inspection is possible. Kedpfx Aey Eg Dyeh Eelu

Condition: ready for operation (used), Year of construction: 1991, Flow rate: 1500 m³/h Drive motor: 380 V, 2850 rpm, 1.5 kW Extraction pipe diameter: 140 mm Kedpfewx H Dyox Ah Eslu 3-meter sections with 3 joints, height-adjustable Intake funnel with throttle valve Space required: 1150 x 600 x approx. 2300 mm

Condition: excellent (used), functionality: fully functional, Large Disa cartridge filter with 32 cartridges and a 22 kW fan moves 10,000 to 16,000 m³ of air with an electronic fire damper. In excellent condition and has always been kept indoors. Extraction system suitable for all types of dust. Still installed, so dismantling must be carried out by the buyer. Kedpeyuzg Tsfx Ah Eslu

Year of construction: 2012, condition: good (used), functionality: fully functional, For sale is a CFT compact filter technic top-mounted dust extraction system, type HKAF 12-30 The system is fully functional and ready for use immediately after connection All documentation for the system available thanks to CFT Digital Contact details can be passed on after purchase. Technical data: Year of construction: 2012 Length: 2476 mm Width: 1277 mm Height: 2330 mm Weight: 600 kg Exhaust air flow rate: 28 m3/min Filter elements: 12 pieces Filter area: 30 m² Filter material PMB 600*500 Shock valves: 4 pieces Rotary cycle control unit: 12 cycles Compressed air parameters: 4.5 bar Loading & or shipping possible for an additional charge Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Ksdpfx Ajrfcpmoh Ejlu For further information or contact options, please visit our website

Condition: used, Year of construction: 2011, functionality: fully functional, Donaldson DCE Torit DMC-MMC filter oil mist separator, oil separator, oil extractor, air filter Year of manufacture: 2011 Connection: 400V, 1.5KW Klodpfx Ahjxri T Uj Eju Fully functional condition, see pictures Forklift available for loading Collection only by appointment in 75053 Gondelsheim Shipping by freight forwarding possible, please inquire with postal code

Condition: good (used), DF separator, fine oil separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Mann Filter, Air Oil Separator Filter Type 49 002 -Inside/outside: Ø 124/169 mm -Number: 5x air filters available -Price: per piece -Dimensions: Ø 190 x 315 mm -Weight: 2.6 kg/piece Ksdewbzxqopfx Ah Ejlu

Condition: excellent (used), Hydraulic filter Kjdsb A Skujpfx Ah Ejlu -Type: RG 045/070/RE045G20B -Quantity: 3 available -Price: per piece -Weight: 0.5 kg/piece

Condition: used, Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter Klodpfx Ajd Sxg Uoh Eou -Mann air filter housing with: filter -Inlet/outlet: Ø 80/70 mm -Part Number: 43 905 63 8981 -Dimension: Ø 260/400 mm -Weight: 11.5 kg

Condition: excellent (used), Hydraulic filter Kjdpfx Ahob A Rh No Eslu -Type: HY13479 -Quantity: 10 available -Price: per piece -Weight: 0.5 kg/piece

Condition: good (used), Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter Ksdpfx Asd Sxg Rjh Eolu -Mann air filter housing -Inlet/Outlet: Ø 39/39 mm -Part Number: 45 Quantity: 1 air filter housings included -Price: per piece -Dimensions: Ø 173/165 mm -Weight: 1.8 kg