Condition: used, Year of construction: 2017, functionality: fully functional, workpiece height (max.): 60 mm, height adjustment type: electric, feed rate X-axis: 20 m/min, Equipment: documentation/manual, We offer this Format4 Tempora 60.12 edge banding machine, used, manufactured in 2017. Manufacturer: Format4 Model: Tempora 60.12 Ibodpfx Afeztmbrouja Year of manufacture: 2017 Condition: used If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: reconditioned (used), functionality: fully functional, Flat- or glue joint scraping unit Used unit, not reconditioned, without warranty - For removing of glue residuals or leavings from the panel surface in the area of the glue joint. Specification: - consisting of one top and one bottom unit, individually adjustable. - top unit synchronized with top pressure in vertical direction - version with 3 small tracer rollers, individually adjustable, for smooth passage at front and rear edge of panel. IMPORTANT ANNOTATION: version with pneumatic cylinders for lateral cut-in/out controlled by selection of the individual unit in the main control is currently not available. But it is possible to retrofit this feature. Please ask for our quote. Isdjtywukspfx Afuoba Installation and set-up of the unit at your machine is also possible.

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. Ibsdpjztl Scefx Afusa POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: reconditioned (used), functionality: fully functional, Universal Trimming Unit UF11, with frequency inverter Used & reconditioned unit, without warranty For grooving or rebating in edgebanding machines or double end tenoners Specification: - motor can be swiveled steplessly or in rasters from +90 to -90 degrees (each vertical position of motor shaft) - motor 4 kW, 3Ph 400 V, 300 Hz - motor shaft diameter 30 mm Ibsdpfx Asztl Rxjfuja - with electro-pneumatic jumping function - inclusive of suitable KEB frequency inverter (used & tested) Upon request the unit can be upgraded to motorised (NC-controlled) adjustments in x- or y-axis. Please ask for our quote. Installation and set-up of the unit at your machine is also possible. Availability 1 - 2 weeks after receipt of order.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, HOMAG Pre-melting unit for Quick-Melt system Iedpfx Ajztl Nbsfuoba

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Numerically adjustable infeed fence Air flotation infeed table Anti-adhesive liquid spray system Pre-milling unit with diamond cutters Edge feeder for edge banding from coil or strips Glue station for GlueJet cartridges or L-Tronic laser technology 4 pressure rollers with pneumatic pressure adjustment Edge lubricant spray system Dual-motor precision end trimming unit with pneumatic angle adjustment Top and bottom edge surplus trimming unit (straight trimming) Numerically adjustable profile edge milling unit Flat scraper Profile scraper – two profiles Cleaning liquid spray system Pneumatically activated buffing units Pneumatically activated edge buffing unit Feed speed continuously adjustable from 10 to 25 m/min Automatic lubrication of the feed chain Frame support Minimum workpiece length: 140 mm Iodpfxoztkfbe Afujba Workpiece thickness: 8–60 mm Minimum workpiece width: 60 mm Year of manufacture: 2016

Condition: used, machine/vehicle number: 008605, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Ibjdpozqz Rijfx Afusa Grooving Unit: yes Max feed speed: 40 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: used, Storage location: Sonnefeld Ibsdpfxoway Dco Afusa

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Storage location: Nattheim Iodpfx Afevvkd Tjujba

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Ibodjvvkfdepfx Afuoa

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Ijdovvkfqjpfx Afuoba Storage location: Nattheim

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Storage location: Nattheim Iedpfx Ajvvkfwjfueba

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Ibsdpsxyiiljfx Afuea Storage location: Nattheim

Condition: used, Year of construction: 1999, Edge height: 10 - 60 mm Edge thickness: 0.4 - 3 mm Min. curve radius: 20 mm Feed speed: 2 - 18 / 4 - 14 m/min. Motor: 5.2 kW Air pressure: 6 bar Dimensions: 900 x 1300 x 1200 mm Weight: approx. 350 kg Storage location: Nattheim Ibsdpfxoymcrbe Afuja

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 202.03.008.17, functionality: fully functional, input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 12 m/min, total height: 1,693 mm, total length: 4,620 mm, total width: 1,200 mm, Equipment: CE marking, documentation/manual, FORMAT4 Tempora F800 60.08 e-motion Edgebander Manufacturer: FORMAT4 / Felder Group Model: Tempora F800 60.08 e-motion Year of manufacture: 2017 Serial number: 202.03.008.17 Location: Slovenia Well-maintained FORMAT4 Tempora F800 60.08 e-motion edgebander in very good technical condition. The machine has processed approximately 63,000 linear meters. It is fully operational, regularly maintained, and ready for production. The machine is currently connected and can be inspected and tested while powered on. Technical data: - Feed speed: 12 m/min - Workpiece thickness: up to 60 mm - Coiled ABS/PVC edge thickness: 0.4–3.0 mm - Strip edge material: up to 8 mm - Electrical connection: 400 V / 50 Hz / 3-phase - Rated power: 11 kW - Rated current: 28 A - Required compressed air pressure: 7 bar Overall dimensions: - Length: approx. 4,620 mm - Machine width without extended front support: approx. 1,200 mm - Height with safety hood closed: approx. 1,693 mm - Required operating depth with front support extended: approx. 1,775 mm - Height with safety hood open: approx. 2,068 mm Equipment: - Pneumatic-mechanical workpiece stop at the infeed - Premilling unit with replaceable cutters - Premilling working height up to 64 mm - Infrared heating lamp - EVA glue pot - Reversing function of the glue roller - e-motion end-trimming unit with two motors Ibjdpfoztbutsx Afusa - Pneumatically tilting end-trimming saws, adjustable from 0° to 15° - Tandem copying unit - Rondomat corner-rounding unit for edge thicknesses from 0.4 to 3 mm - Motorized positioning of the Rondomat unit - Radius scraper unit with pneumatic activation - Flat scraper unit for nesting applications - Release agent spray unit - Sliding agent spray unit - LED interior working lights The machine is being sold due to investment in a newer edgebander. Availability is by agreement. Dismantling, loading, and transport are at the buyer's expense unless otherwise agreed. Please contact me through Machineseeker for further information, additional photos, a video demonstration, or to arrange an inspection.

Condition: excellent (used), Year of construction: 2019, I sell the fully equipped edge banding machine Holz-Her Streamer 1057 XL, year 2019: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable Clue scrapers pneumatic adjustable Cleaning brushes top + bottom Cleaning fluid spray front + back Control panel Working thickness adjustment manually Material height 8-60mm Edge thickness 0,4-8mm Feeding speed 10m/min. Total length including feeding plate 4200mm Very good condition, fully working! Including full documentation and CE. Available immediately. Ijdpfozr Rwhjx Afujba

Condition: used, Year of construction: 2014, functionality: fully functional, Equipment: CE marking, OTT TWISTER Edge Banding Machine This is a single-sided edge banding machine, operated from the right side, designed for applying and processing edges made of veneer, plastic, and solid wood. Year of manufacture: 2014 1. Technical specifications and dimensions: • Banding thickness: 0.4 – 10 mm. • Part width: minimum 70 mm. • Part height: 8 mm to 60 mm. • Part length: minimum 150 mm. • Continuous speed: 18 m/min. • Working height: 880 mm. • Machine dimensions: height 1,600 mm, width 1,100 mm, length 7,200 mm. • Weight: 3,250 kg. • Operating voltage: 400 Volt, 50 Hz. 2. Key working units: • Pre-milling unit: equipped with 2 motors (2.2 kW, 12,000 rpm) for milling the front surface. • Glue application (Vario-Melt): application roller with dosing automation and modular Combi Melt system for EVA and PUR adhesives. • K13 trimming unit: 2 motors (0.2 kW) for precise edge trimming with a tilting option of 0/5°. • Rough and fine milling unit: for processing edge overhang and radius milling. • AKF copying milling cutter: automated unit for longitudinal and corner processing with a function for veneer and postforming. • Scraping units: includes a radius scraper ZKc (for PVC edges) and a surface scraper ZKf (for removing excess glue). Accessories • PUR package: includes a quick-change head and a hopper. Iodpfx Afjzr Nkgoujba OTT TRANSLIFT Transport System This system is used for automatic handling of parts and returning them to the operator. • Manipulator: single-column, with suction, maximum load capacity 60 kg. • Movements: rotation 0°/90° and transfer to the return belt. • Return conveyor belt: width 900 mm, length corresponds to the machine. • Part limits: maximum length 3,000 mm, maximum width 1,300 mm.

Condition: used, Holz Her Sprint 1329 Black Edition Heavy-duty version - edge thickness 0.4 - 8 mm (15 mm with tool change) 18.5" touchscreen control, Power-PC color display Motorized, position-controlled bridge height adjustment Pre-milling unit for attachment before the gluing station Automatic infeed guide rail 1350 mm MOT Edge magazine, fully automatic for coil and strip material MOT Glue application station GLU-JET cartridges - hot melt and PU gluing, thin-film technology Edge height max. 60 mm Glue height adjustment / sensor nozzle High-gloss package Pressing unit 1913 mot., motorized-pneumatic NC servo axis Cutting unit for coil and strip material up to 15 mm edge thickness Isdezdzlmopfx Afusba with electro-pneumatic adjustment of 0-10° bevel of the cutting saw Multi-function milling unit MOT 6 - NC control axes: Flush trimming 8 mm (15 mm) Radius milling Chamfer milling 0 - 15° Copy milling unit MOT 4, corner copying, postforming corners with 4 NC control axes, for milling the upper and lower longitudinal edge and copy milling the front and rear end edges, vertical edge, working height 60 mm Scraping blade unit MOT4 Surface scraping blade unit – finishing Buffing unit for final polishing and edge polishing with 2 textile discs Spray system for infeed and outfeed areas as well as antistatic agent at the pressing unit Infeed area: electronically controlled release agent spray device Pressing unit: electronically controlled antistatic spray device Outfeed area: electronically controlled cleaning agent spray device with cleaning agent First delivery 2018 / from lease return Machine is WORKSHOP OVERHAULED in TOP CONDITION Available from stock, Lieboch

Condition: used, Holz Her Sprint 1321, with edge banding and PU adhesive application Heavy-duty version – edge thickness 0.4 – 15 mm SPS-based Edgecontrol control panel Motorized, position-controlled bridge height adjustment Iodpfx Afszp Hc Usuoba Pre-milling unit for attachment before the gluing station Fully automatic edge magazine for roll and strip material Gluing unit with cartridge system + PU adhesive application Automatic glue height adjustment / touch probe nozzle Pressure unit 1913, pneumatic Trimming unit for roll and strip material 1918 – 15 mm With pneumatic adjustment for trimming saw angle from 0-10° Multi-function milling unit with motorized adjustment: flush trimming – 15 mm, radius and chamfer milling – 15° Profile milling unit – corner rounding 1833 Scraping unit for chamfers and radii 1929, pneumatic Pneumatic infeed and outfeed Surface scraping unit – finishing, pneumatic Buffing unit for finishing and edge polishing with 2 textile discs HIGH-END spraying system Complete set of tooling Machine is in FULLY OPERATIONAL CONDITION Machine from a craft business / consignment sale Available from stock in Lieboch, NET € 21,500.00

Condition: used, Year of construction: 2017, HOLZ-HER Edgebanding Machine LUMINA 1380 Used machine Year of manufacture: 2017 Condition: Well-maintained Motorized pressure beam adjustment Edge thickness, roll material: 0.4 - 3 mm Edge thickness, strip material: max. 3 mm with unit FF701 max. 8 mm without unit FF701 max. 15 mm with tool change on the multi-function milling unit Edge height: max. 65 mm Workpiece thickness: 8 - 60 mm Workpiece width: min. 60 mm Workpiece length: min. 160 mm Feed speed: continuously variable, 10 - 18 m/min Control system Edge Control 19 with 18.5" touchscreen color display 16:9 ECO MODE energy-saving mode Infeed fence, 1350 mm long Motorized adjustment of infeed fence Joint milling unit 1802, edge feed MG701 SYNCHRO Glue application station Glu Jet GJ302 automatic (refurbished in 2026) Including changeover trolley Including quick-change couplings Including HSK mounting for the unit Including automatic unit detection Ibodszpzy Uepfx Afuea GLU JET collection container Pressing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12000 min-1) pneumatically pivoting 0/10° Milling unit FR701 6 fully digital NC servo axes. Profile milling unit FF701 4 fully digital NC servo axes. Scraper unit 1929 MOT4 incl. high-gloss kit Surface scraper FK701 Spraying system 1856 for the infeed and outfeed area Spraying system (release agent) after the pressing unit Automatic chain lubrication Adaptive pressure and glue quantity control Location: Bavaria Availability: approx. August 2026

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Condition: Good (the machine has undergone extensive maintenance every year, most recently in March 2026!) Equipment: - iTronic – Adaptive pressure and glue quantity control with automatic, program-dependent fine adjustment - MOT SPS adjustable infeed fence - Automatic chain lubrication: Intelligent automatic transport chain lubrication - Edge Control 19 control system - EL GRM variable, 400V 50Hz, 2.2kW V2 SPRINT 1329 PERFORMANCE 400V 50Hz - Edge Control 19 control system with 18.5" touchscreen color display, 16:9 format - ECO MODE energy-saving mode: An automatic standby circuit - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for jointing panel edges - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Edge feed 1901 SYNCHRO: automatic transport of coil and strip material - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - DW501 SPS motorized SPRINT - GM501 spray device after the printing unit with lubricant (recommended for high-gloss edges) - End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically tiltable 0/10° - Milling unit FR701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Air Stream System multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 Ibedjzpzy Ispfx Afuja - Form milling unit FF701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, left-hand rotation with CM technology - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, right-hand rotation with CM technology - Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the tracing rollers - HW reversible knives for scraper holder, R = 2.0 mm (2 pcs. required) - Flat scraper FK701 with pre- and post-sensing for removing adhesive residue - TR501 spray unit for infeed and outfeed (separating and cleaning agent) - Includes nesting shoes below with their own spray unit Location: Hesse Availability: Approx. July 2026

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Equipment and technical data: Edge banding thickness: max. 8-55 mm Edge banding with rounding unit: max. 45 mm Strip edge banding thickness: 0.4 - 8 mm Roller edge thickness: 0.4 - 3 mm Feed rate: 12 m/min Incl. rotatable control panel HF joining unit, 2-motor Incl. quick-heating tank, interchangeable, Teflon-coated Incl. electronic positioning of the pressure rollers Incl. swiveling double miter saw unit Incl. flush trimming unit Incl. CNC-controlled chamfering, radius, and corner copying unit with nesting package Incl. radius pull blade with nesting package Incl. flat pull blade Iedpfxew Nadgj Afusba Incl. groove unit Incl. scraping unit Incl. spray unit Availability: short notice Location: Flörsheim

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 0-261-07-3237, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, height adjustment type: mechanical, actuation type: electric, total height: 1,580 mm, total length: 4,780 mm, total width: 1,130 mm, overall weight: 1,630 kg, Equipment: CE marking, documentation/manual, I am offering a professional edge banding machine from Brandt, model Optimat KDF 430. * Brand: Brandt (HOMAG Group) * Model: Optimat KDF 430 * Year of manufacture: 2008 * Functions: Edge banding with EVA glue * Second glue tank for color changes * Diamond pre-milling cutter * Trimming unit * Pressure rollers * Circular saw for length trimming * Milling unit, top/bottom: rounding, chamfering, flush trimming * Corner rounding unit * Profile trimming blade * Surface trimming blade Ibedpfjzrtbpox Afuoa * Max. workpiece height: 60 mm * Max. edge thickness: 6 mm solid wood The machine is fully functional and ready for operation! Available from week 40/2026. Please feel free to contact me if you have any questions.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, We offer this excellent HEBROCK AKV 3005 DK-F Airtronic edge banding machine with solid edge band magazine, manufactured in 2014. Manufacturer: HEBROCK Model: AKV 3005 DK-F Year of Manufacture: 2014 Condition: very good Category ID: 877 Type: Airtronic edge banding machine with solid edge band magazine Hebrock AKV 3005 DK-F edge banding machine (2014) – Fully equipped with Airtronic & Solid Edge Band Feeder An extremely well-equipped and production-ready edge banding machine. The machine is in very good condition; this specific machine is equipped with Hebrock’s Airtronic unit for zero-joint/laser-joint (hot-air system) and a solid edge band magazine for thick wood edges. The machine has a complete processing line, which means a finished result directly from the machine without the need for post-processing. Pre-milling: Double pre-milling cutter (joint milling) with diamond tools for a perfect cutting surface. Gluing system: Traditional glue application (hot melt) + Airtronic unit for seamless zero-joint. Magazine: Automatic edge band magazine, also optimized for solid edge bands. Cutting: 1 high-precision cutting blade. Milling: Upper and lower milling unit for radius and bevel milling. Corner rounding: Integrated corner copying/corner rounding for finished corners. Finishing/Post-processing: Profile scraping (radius scraper), flat scraping (surface scraper), and polishing unit. The machine handles everything from thin rolls (ABS/PVC) to thick solid wood edges. Thanks to the Airtronic system, you can achieve the sought-after "invisible joint" required in modern furniture manufacturing. Iedpfszrm Dqjx Afueba The machine can be demonstrated in operation by appointment. The buyer is responsible for removal and transport. VAT will be added to the price. If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2020, functionality: fully functional, operating hours: 380 h, power: 6.7 kW (9.11 HP), input voltage: 400 V, input current: 7 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 9 m/min, total height: 1,636 mm, total length: 3,731 mm, total width: 720 mm, overall weight: 950 kg, Equipment: CE marking, documentation/manual, We are offering this used OAV MAX 370P edge gluing machine, manufactured in 2020. Model: MAX 370P Motor power: 6.7 kW Voltage: 400 V Current: A Ibjdpfx Aozrl Izofuea Phase: 3 PH Frequency: 50 Hz Date of manufacture: 03.2020 Serial number: 20030001EB/P1 Including: - Pre-milling cutter. - Miter saw. - Radius milling cutters, top and bottom. - Corner rounding. - Radius scrapers. - Cleaning brushes. If you have any questions or would like more information, please feel free to call or email us. The machine can be seen in operation.