Condition: ready for operation (used), Year of construction: 2024, workpiece height (max.): 60 mm, feed rate X-axis: 10 m/min, spindle speed (max.): 16,000 rpm, control type: PLC-controlled, The machine has already been disassembled and stored by a specialist. TECHNICAL DETAILS Rotational speed of the miter saw station: approx. 16,000 rpm Rotational speed of the milling station: approx. 16,000 rpm Maximum milling depth: 3 mm Design for edge thickness: 1 mm Hot melt adhesive specification for edge material max.: 3 mm Feed rate: approx. 10 m/min Maximum workpiece thickness: 60 mm EQUIPMENT Maintenance-free, coated glue basin with provision for interchangeable basins Glue dispensing device Kdjdszb Idfepfx Abfsn Pneumatic milling adjustment Combination design with interchangeable plate cutter Corner rounding milling cutter Radius drawing blade Surface drawing blade with pneumatic extraction device Cleaning station Robust chain drive Ball-bearing mounted double roller pressure pad Aggregate viewing window from the machine's rear and operator side Signal lamp for workpiece sequence Extendable workpiece support ACCESSORIES Hebrock 8 mm version Hebrock quick-change system for corner milling cutter Hebrock jointing up to 60 mm workpiece thickness Hebrock protective spray for edges Hebrock nesting (milling cutter + radius drawing blade) Hebrock Airtronic Note: Accessories are provided without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on-site.

Condition: used, Year of construction: 2007, with edge gluing: workpiece thickness: 8 - 50 mm, edge thickness: 0.4 - 3 mm, fixed lengths: max. 3 x 45 mm, feed rate: 11 m/min, connection value: 10.5 kW, compressed air: 6 bar, weight: approx. 1250 kg, machine length: 3920 mm. Kdedjy Tpz Dopfx Abfon Storage location: Supplier.

Condition: good (used), Code: 0414 Brand: SCM MINIMAX Model: ME 25 - CE Standard Automatic edge bander for joinery, furniture, custom-made furniture, panels, doors, kitchens and various – CE Standard – Year 2017 Technical data: Thickness of roll edge 0,4–3 mm Max edge thickness 5 mm Min/max panel height 12/50 mm Kdodpfx Ajzfapmjbfsn Panel feed speed 7 mt/min Work surface height 904 mm Min panel length/width 190/65 mm High-grip toothed feed belt Panel support roller conveyor along the entire length of the machine Composition: Gluing unit: Glue tank capacity 1 kg – Motor power 0,18 Kw End cutting unit: Motor power 0,37 Kw – End trimming blade diameter 90 mm Z 20 – Blade rotation speed 12000 rpm Overlapping trimming unit: Upper and lower motor power 0,75 Kw – Vidia cuttersn diameter 75 mm Z 4 – Cutter rotation speed 12000 rpm Edge scraper unit for finishing Pvc/Abs edges Glue scraper unit for removing any excess glue Suction inlet diameter 120 mm Overall dimensions mm 1950 x 700 x 1250 h Weight kg 430

Condition: ready for operation (used), Year of construction: 2008, operating hours: 7,900 h, Edgebander manufactured in 2008. This OTT Tornado features a maximum panel thickness of 60 mm and a minimum panel length of 150 mm. It includes a CombiMelt Glueing System and a double end trim unit for efficient processing. If you are looking to get high-quality edgebanding capabilities, consider the OTT Tornado machine we have for sale. Contact us for further details. Kedpfx Ajzd U N Eebfjdn - Operating Hours: Approx. 7,900 hours (Calculated average from 2021-2026 following computer replacement in 2021)- Voltage: 3x400 VAC- Current: 31 A- Power: 19.5 KW- Frequency: 50 Hz- Control Voltage: 24 VDC- Max Fuse: 35 A - 5x6mm²- Edge Dimensions: Max. 65 x 2 mm / 55 x 12 mm- Panel Thickness: 8 - 60 mm (Up to 42 mm for premilling)- Panel Length: Min. 150 mm- Panel Width: Min. 70 mm- Control System: Panel Lodge System / Beckhoff 15" Color Touch Screen- Glueing System: CombiMelt Glueing System (Modular design for EVA and PUR hot melt, 1.5-liter hopper)- Premilling Unit: 2 HF motors (2.2 kW, 12,000 rpm) with diamond tools- Edge Magazine: For coiled edge material (0.4 - 3.0 mm) with automatic cutting device adjustment- Double End Trim Unit: 2 HF motors (0.3 kW, 12,000 rpm), automatic positioning 0°/3°- Rough Trimming Unit (Bfc): 2 motors (0.7 kW, 12,000 rpm)- Fine Trimming Unit: 2 HF motors (0.3 kW, 12,000 rpm) for radius 2-5 mm- Radius Scraper: Two-side tracing, automatic positioning with separate dust collection container- Corner Rounding System (KF-a): 2 HF motors, double-parallelogram guidance, max height 60 mm Technical Specification Feed Speed 14 m/min

Condition: used, Year of construction: 2001, Workpiece thickness min./max.: 6/45 mm Edge banding thickness: 0.4 - 3 mm Edge banding height max.: 51 mm Edge banding strip length min.: 350 mm Edge banding overhang in height per side max.: 3 mm Workpiece width min.: 60 mm Workpiece length min.: 180 mm Overall length: 3700 mm Width: 1440 mm Height max.: 1970 mm Workpiece infeed height: 850 mm Weight: approx. 850 kg Storage location: Nattheim Kedpoy Dd Iyefx Abfedn

Condition: used, Holz Her Sprint 1329 Black Edition Heavy-duty design – edge thickness 0.4 – 8 mm (15 mm with tool change) 18.5" touchscreen control panel, Power-PC color display Motorized, position-controlled bridge height adjustment Pre-milling unit for attachment before the gluing station Automatic infeed fence, 1350 mm MOT Edge magazine, fully automatic for coil and strip material, MOT Gluing station GLU-JET cartridges – hot melt and PU adhesive, thin-film technology Edge height max. 60 mm Glue height adjustment / sensor nozzle Press unit 1913 mot., motorized-pneumatic, NC servo axis Ksdpfx Aezdzlmobfsdn Cutting unit for coil and strip material up to 15 mm edge thickness With electro-pneumatic adjustment of 0-10° bevel on the miter saw Multi-function milling unit MOT 6 - NC control axes: Flush trimming 8 mm (15 mm) Radius trimming Chamfer milling 0 - 15° Copy milling unit MOT 4, corner copying, postforming corners with 4 NC control axes, for milling the upper and lower longitudinal edge and copy milling the front and rear end faces, vertical edge, working height 60 mm Scraping blade unit MOT4 Surface scraping blade unit – finishing Buffing unit for final polishing and edge polishing with 2 textile discs Spray system for infeed and outfeed areas as well as anti-static agent at the press unit Infeed area, electronically controlled release agent spray device Press unit, electronically controlled anti-static spray device Outfeed area, electronically controlled cleaning agent spray device with cleaning agent First delivery 2018 / from lease return Machine is FACTORY REFURBISHED in TOP CONDITION Available from stock in Lieboch

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total height: 2,100 mm, total length: 6,700 mm, total width: 1,050 mm, empty load weight: 3,500 kg, Equipment: CE marking, TECHNICAL DETAILS The machine has the following configuration: 1. Unit: Nordson pre-milling unit (tools included) 2. Unit type: Gluing unit 3. Unit type: Pressure rollers (tools included) Ksdpjzdzmkefx Abfsdn 4. Unit type: Rough milling unit 5. Unit type: Cut-off unit 6. Unit type: Fine milling unit MACHINE DETAILS Number of units: 6 Voltage: 400 V Power consumption: 41 A Fuse: 50 A Dimensions (L x W x H): 6,700 x 1,050 x 2,100 mm Weight: 3,500 kg Transport packages: 5 EQUIPMENT CE marking

Condition: used, machine/vehicle number: 008585, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Kjdpfx Asy In A Aobfjdn Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Base machine with manual pressure bridge adjustment - Extendable workpiece support, distance: 600 mm - Joint milling unit FG 201 with 2 milling heads incl. diamond milling cutters 70 x 48 x 30 mm, Z 2 - Edge feeder 1903, single feed, automatic transport of coil and strip material Kdjdezdlwyepfx Abfen - Gluing system Glu Jet GJ 301 with automatic glue height adjustment (touch-sensitive nozzle) - With magazine for glue cartridges - Printing unit 1912-3, pneumatic, first roller driven with pneumatic immersion control - Trimming unit 1918, pneumatically pivoting 0-10 degrees - Multifunction milling unit 1827 MOT 4 with pneumatic package incl. diamond milling cutters - Profile milling unit 1832 for corner copying with radius milling cutter - Pull blade unit 1929 MOT 2 - Chip collection box - Surface pull blade FK 701 - Deburring unit 1940 - Minimum workpiece length (mm) 160 - Workpiece thickness (mm) 6-60 - Edge thickness (mm) 0.4-6 - Feed speed (m/min) 10 - Overall length (mm) 4930 - Weight (kg) 1420

Condition: excellent (used), Year of construction: 2018, Specification Length: 4605mm Workpiece Thickness: 40mm Edge Material Roll: 0.4 – 3mm Kdsdpfxszdklce Abfon Edge Material Strip: 0.4-3mm Feed Speed 8m/min Joint Trimming Unit 40mm Quick Change Application Unit Magazine for Coiled Material Pneumatic 2 point adjustment Pressure Zone End Trim Unit with Pneumatic Adjustment Pneumatic Adjustment Fine Trim Contour Trimming Unit Pneumatic Adjustment Profile Scraping Unit Glue Joint Scraper Buffers LED Indoor Lighting EasyTouch Control System Manual Central Lubrication Manual Top Pressure Adjustment Roller Top Pressure

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Kdodpfx Abewlbxljfen Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: ready for operation (used), Year of construction: 2017, overall weight: 3,800 kg, Edgebander manufactured in 2017. This HOMAG Optimat KDF 440 C features a workpiece thickness capacity of 8 - 60 mm and edge material compatibility of 0.4 - 8 mm. It offers a variable feed speed of 8 - 18 m/min and includes several units for joint trimming, glue application, and corner rounding. If you are looking to get high-quality edge banding capabilities, consider the HOMAG Optimat KDF 440 C machine we have for sale. Contact us for further details. Kdsdpfx Abezdidasfsn • Condition: Used • Workpiece thickness: 8–60 mm • Edge material: 0.4–8 mm (depending on unit configuration) • Feed speed: 8–18 m/min (variable) • Min. workpiece length: approx. 120 mm • Min. workpiece width: approx. 60 mm • Glue application: EVA hot-melt adhesive; PUR-compatible (optional) • Glue pot: Teflon-coated; quick-change capability • Total connected load: approx. 15–20 kW (depending on configuration) • Compressed air requirement: 6–7 bar • Control system: powerControl / powerTouch • CE marking: Yes • Unit configuration: • Joint trimming unit • Glue application unit • Pressure zone • End trimming unit • Top/bottom trimming unit • Corner rounding unit • Scraper unit • Buffing unit

Condition: ready for operation (used), Year of construction: 2000, overall weight: 2,000 kg, Edgebander manufactured in 2000. This OTT Pacific V6-F features an edge thickness capability of 0.2 - 6 mm and can handle workpiece thicknesses from 8 to 42 mm. It operates at a feed speed of 12 m/min and includes various processing units such as joining mills, a gluing unit, and a polishing unit. If you are looking to get high-quality edge banding capabilities, consider the OTT Pacific V6-F machine we have for sale. Contact us for further details. Kdodpfx Ajy Df Uusbfsn Used single-sided edge banding machineBrand: OTTType: Pacific V 6-FYear of manufacture: 2000Technical specifications:Edge thickness: 0.2 - 6 mmWorkpiece thickness: 8 - 42 mmWorkpiece width: min. 70 mmWorkpiece length: min. 150 mmFeed speed: 12 m/ctrical connection: 3 x 400V, 50 HzExhaust: 2 x Ø 120 mm at 20 m/aust capacity: 30 m³/hEquipment - Processing units:Joining mills2 x 1.5 kW, 12,000 rpm, 200 Hztwo application-controlled work spindlesGluing unitRapid-heating tank with Melt-maticautomatic edge magazine with optical monitoringfor strip edges in fixed lengthsRelease agent spray systemend trimming unit2 x 0.2 kW, 12,000 rpm, 200 Hzautomatic swivel 0° / 3°Flush milling unit 0° / 15° / 30° / 45°2 x 0.43 kW, 12,000 rpm, 200 HzRadius milling unit R2 - R52 x 0.3 kW, 12,000 rpm, 200 Hz2 quick-change stations for milling unitsCorner rounding milling unit2 x 0.3 kW, 12,000 rpm, 200 HzScraper2 x carbide scrapersPolishing unit2 x 0.2 kW, 2,800 rpm, 50 HzWeight: 2,000 kgNote:The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing unit, including DIA tools • Jointing capacity up to 40 mm • Workpiece thickness up to 3 mm • Combination milling station, radius R 2.5 mm Technical Description: - Hot melt adhesive application to the workpiece for edge materials up to 3 mm - Workpiece thickness up to 60 mm without jointing unit, up to 40 mm with jointing unit - Maintenance-free, coated gluepot - HF end-trimming unit (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable cutter heads (combination version) and fine adjustment from the operator side - Free spaces for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment of the end-trimming saw - Signal lamp for workpiece flow - Robust chain feed - Ergonomically arranged control panel - Double roller upper pressure beam - Aggregate windows on machine rear and operator side - PLC control with touchscreen included Technical Data: - Feed rate: 10 m/min - Panel thickness: 8 – 40 mm - Weight: approx. 1550 kg (depending on configuration) Kdsdpfex S Hmzsx Abfjn - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spray system (2014) • 1 pc hot air unit for visual zero joint using special edge materials • Including pneumatic gluepot positioning • Including cooling and antistatic spray system • Including 2 additional quick-change edge channels • Including special version corner rounding unit; max. workpiece thickness 60 mm, min. length 200 mm - Exclusively for Hebrock 3000 series edgebanders - Retrofitting possible at extra cost upon request Technical Data (special unit): - Max. panel thickness: 40 mm - Edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (only Airtronic), electronically controlled - Ready for operation after approx. 2 min Upgrade to 8 mm edge thickness possible; max. workpiece thickness 40 mm • Including pneumatic saw adjustment (special version, min. workpiece thickness 8 mm) • 3-point pneumatic milling shift • Selector for radius/chamfer/flush for combination milling stations, eliminating manual changeover (PLC control required) Buffing station (swab): 1 pc Corner rounding unit: 1 pc incl. combination tooling and pneumatic radius/chamfer adjustment, max. 40 mm workpiece thickness, min. 300 mm workpiece length, Radius R 2.0 mm Radius scraper: 1 pc with pneumatic lift, Radius R 2.0 mm Flat scraper: 1 pc with pneumatic actuation Complete chassis: 1 pc Glue station quick-change system incl. glue discharge system (downward outlet in preparation), 1 pc (no second gluepot), machine can process PU adhesive Grooving unit (vertical for panel): 1 pc incl. pneumatic lift, vertical groove, groove width 8.2 mm, groove depth 8.0 mm, distance from panel edge 14.0 mm; special motor version with higher performance Extraction for internal jointing unit: 1 pc connected to machine's extraction manifold Corner rounding cutter ball bearings: 24.1 mm (1 pc), 24.2 mm (1 pc) Edge protection spray system: 1 pc for sensitive edge materials Combined spray system (separating and cleaning agent): 1 pc Location: Supplier stock

Condition: reconditioned (used), functionality: fully functional, Flat- or glue joint scraping unit Used unit, not reconditioned, without warranty - For removing of glue residuals or leavings from the panel surface in the area of the glue joint. Specification: - consisting of one top and one bottom unit, individually adjustable. - top unit synchronized with top pressure in vertical direction - version with 3 small tracer rollers, individually adjustable, for smooth passage at front and rear edge of panel. IMPORTANT ANNOTATION: version with pneumatic cylinders for lateral cut-in/out controlled by selection of the individual unit in the main control is currently not available. But it is possible to retrofit this feature. Please ask for our quote. Installation and set-up of the unit at your machine is also possible. Kdodpfx Abjtywukjfjn

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Kjdpfjw Tfw Hex Abfjdn Proven quick heating tank; heating time approx. 5 minutes. Safety interlock for the application roller; the roller engages only after reaching operating temperature. Centrally height-adjustable upper pressure bar. Edge feeding and roll separation pneumatically controlled. Connected load: approx. 11.5 kW, heating power 4.5 kW, frequency inverter 300 Hz, 4 kVA. HF crosscut saw unit: electrically and pneumatically controlled, motor power 0.37 kW. Saw blade diameter: 100 mm HF flush milling unit: for radius, straight and chamfer milling. Crosscutting from rolls up to 3 mm. Edgebanding and crosscutting up to 5 mm. Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: Chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Extendable workpiece support at front. Digital position display for feed height adjustment, edge thickness, and milling. With chassis. With heated infeed ruler. Compressed air connection: 6 bar Central extraction port: 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Approx. 560 kg Availability: short notice Storage location: Flörsheim

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 1552.3, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, total height: 1,380 mm, total length: 2,700 mm, total width: 750 mm, overall weight: 750 kg, For sale is a used BI-MATIC S.r.l. edge banding machine, model Starter, without a joining unit. The machine is in technically perfect condition and is ready for immediate use. Year of manufacture: 1999 Panel thickness: 8 – 40 mm Edge thickness, roll material: 0.4 – 3 mm Edge thickness, strip material: 0.4 – 5 mm Glue: Granules Heating time: approx. 5 – 6 minutes Kdsdpfx Abezfpt Ujfsn Dimensions: Length: 2700 mm Width: 750 mm Height: 1380 mm Weight: approx. 750 kg The machine can be inspected and tested by appointment. A forklift is available on site for loading, so the machine can be easily loaded onto a trailer or truck. The machine is sold used, excluding any warranty, guarantee, or right of return. If you are interested or have any questions, please do not hesitate to contact us.

Condition: excellent (used), Felder TEMPORA F400 edge banding machine Pre-milling cutters, Glue application via roller, Replaceable tank Tank capacity 1.5 kg Heating time 10 min Pneumatic guillotine for pre-trimming Liquids Ready-to-use trimming balls Up-and-down milling unit R1-R2 Corner rounding unit, Profile trimming cutter Flat trimming cutter, Cleaning fluids Polisher, Max element height 48 mm, Max edge band thickness in roll 3 mm, Feed rate 12 m/min In my opinion, the technical condition is very good. Year: 2024 Ksdpfxezfiqts Abfodn Machine length: 423 cm Inspection and testing possible on-site.

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: 3074, functionality: fully functional, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, total height: 1,618 mm, total length: 4,984 mm, total width: 1,425 mm, overall weight: 1,400 kg, year of last overhaul: 2025, extraction connection diameter: 140 mm, extraction nozzle diameter: 140 mm, feed rate Y-axis: 10 m/min, working height: 888 mm, Due to the acquisition of a new machine, our reliable edge banding machine, purchased new in 2016, is now for sale. The machine has operated in a joinery workshop with 8 employees. It underwent a complete overhaul in January 2025. New radius scrapers, new milling tools, and new polishing wheels were installed. The pre-milling unit has been re-sharpened. The glue roller’s clutch has been replaced. The glue pot was completely refurbished and cleaned. The machine is suitable for both EVA granulate (e.g., Henkel Dorus KS351) and PUR adhesives. The degree of pre-milling, the edge material thickness, and the position of the lower and upper milling tools can be conveniently adjusted from outside the machine housing via manual handwheels. The control system allows custom edge banding programs to be saved. The machine automatically and pneumatically switches between 0.4 mm and 2.0 mm edge banding via program. Main specifications: - Power: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100–150 l/min) - Touchscreen Kodpfxexlr S Hj Abfedn - Saved edge banding programs - Feed speed: 10 m/min - Edge material thickness, in rolls: 0.5–3.0 mm - Workpiece thickness: 8–60 mm (banding 60 mm thick materials possible) - Minimum workpiece width: 70 mm - Minimum workpiece length: 180 mm (for end trimming saw) / 220 mm (for corner rounding) - Processing units: - Diamond pre-milling (12,000 rpm) - Release agent tank/nozzle - Gluing station - End trimming saw - Milling unit R2 - Radius scraper R2 - Corner rounding unit - Cleaning agent tank/nozzle - Flat scraper - Polishing wheel Price does not include VAT.

Condition: ready for operation (used), Year of construction: 2017, overall weight: 1,650 kg, product length (max.): 4,168 mm, Edgebander manufactured in 2017. This BIESSE Jade 240 features a panel thickness capacity of 10-60 mm and an edge height range of 14-64 mm. It includes a pre-milling unit, glue application unit, and various trimming units for enhanced functionality. If you are looking to get high-quality edge banding capabilities, consider the BIESSE Jade 240 machine we have for sale. Contact us for further details. Kjdpfszc R E Ujx Abfsdn • Technical data: • Panel thickness: 10–60 mm • Edge height: 14–64 mm • Edge thickness (coil): 0.4–3 mm • Edge thickness (solid strips): up to 8 mm • Feed speed: 12 m/min • Minimum workpiece length: 150 mm • Minimum workpiece width at 150 mm length: 85 mm • Minimum workpiece width at 250 mm length: 50 mm • Pneumatic connection: 7 bar • Glue pot capacity: approx. 2 kg • Glue pot heat-up time: approx. 10 min • Dust extraction connections: 100 mm • Standard units: • Pre-milling unit • Glue application unit • End trimming unit • Flush/profile trimming unit • Corner rounding unit • Radius scraping unit • Glue joint scraper • Buffing unit

Condition: used, Year of construction: 2023, Special price – Showroom machine Garbsen INDUSTRIAL AUTOMATIC EDGE BANDING MACHINE stefani md (the images of the machine are not binding with regard to the actual features specified below) KEY FEATURES EDGE BANDING OF SOLID WOOD UP TO 15 MM THICKNESS: SIMPLE AND FUNCTIONAL PROCESSING OF EDGES WITH LARGE DIMENSIONS "SGP" GLUE TANK: USE OF EVA AND POLYURETHANE GLUE FOR A PERFECT GLUE JOINT "STARTOUCH" CONTROL: A TOUCH IS ALL IT TAKES TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge banding machine for applying edge banding with hot melt adhesive to the four sides of straight panels and for subsequent finishing. Machine frame and longitudinal supports made of cold-rolled steel in a box construction, manufactured in a single element, for high rigidity and vibration-free operation to accommodate the working units. Openings with slides for discharging any remaining chips to the floor. Upper pressure beam made of thick-walled steel construction and with columns made of cast iron, for a vibration-free structure where the working units are attached. Pressure rollers on the feed chain in a double row, made of rubber with a high coefficient of friction and with sliding on bearing rollers. Device to protect the pressure rollers from any remaining chips. Electronic adjustment of the upper pressure unit, depending on the panel thickness. Upper working units attached to the pressure beam or mechanically connected to ensure automatic adjustment when changing the panel thickness. Lower working units attached to the machine frame or to the longitudinal support, for a precise reference to the panel. All high-frequency motors are operated via frequency inverters. Protective cover for all units positioned after the gluing unit. Windows made of polycarbonate ensure a good view of the units during processing. Interior lighting of the cabinet. Protective cover with sound-absorbing material for lower noise emissions during processing. The spacer on the infeed guide allows the machine to be fed in the correct spacing. The spacing is automatically adjusted to the selected feed speed. Extraction nozzle arranged on the soundproof hood. Swivel control panel in an ergonomic position at the machine infeed. The electrical system complies with current regulations. Electrical components housed in a metal housing, attached to the machine frame and provided with doors for convenient access during any maintenance work. Panel feed The panel feed is carried out via a feed chain consisting of rubber sliding blocks with a high coefficient of friction, attached to a 1-1/4" industrial chain. The chain slides on 2 guides made of hardened and ground steel, a round guide and a flat guide, to guarantee a straight feed and protect against lateral displacement. Automatic lubrication of the chain. The amount of lubricating oil is optimized by the control system depending on the panels being processed. Support roller track externally and positioned along the entire length of the machine; consisting of an extendable opening system with sliding on linear bearings and plastic sliding rollers with steel pivot pins. "STARTOUCH" CONTROL Main features: 12" touchscreen color display Graphical representation of all processing units and their status (on/off) Kdjdpfx Abszc Ilxefsn

Condition: good (used), Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor Kdedob A Tagepfx Abfen -Connection plug broken -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Acquisition shaft: 20 mm -Tool: mm -Dimensions: 250/60/H130 mm -Weight: 3.8 kg

Condition: used, machine/vehicle number: 008587, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Kedpfxey In Dgs Abfjdn Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008586, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Kdsdpfxoy In A Nj Abfen

Condition: used, machine/vehicle number: 008494, Position 1: Single Edgebanders HOLZHER-LUMINA + MASTER 5510 Kdedpfx Abezbxznsfen Position 2: Panel Return Systems HOLZHER-LUMINA + MASTER 5510