Used cylindrical grinding machines 0-599mm grinding length for sale (101)

Condition: used, Year of construction: 1982, grinding diameter 630 mm grinding length 600 mm centre height 320 mm Chodjv Dxxzepfx Agrsd Machine with heavy duty workhead. Machine will be partial overhauled before delivery. Machine will get a geometry protocoll according to the Kellenberger new machine guideline

Condition: refurbished (used), Year of construction: 2025, operating hours: 36 h, functionality: fully functional, machine/vehicle number: 1024-54, Country of Manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff: 8460.2920 Dimensions: 235 x 155 x 145 cm TECHNICAL FEATURES: MAIN DIMENSIONS: Centre height: 100 mm Distance between centres: 400 mm LONGITUDINAL SLIDE: Max travel: 420 mm Cjdew T Sc Nopfx Agrohd Minimum automatic travel: 1 mm Table feed speed: 100–3500 mm/min Overtravel delay: 0–5 sec. Maximum table swivel (400/650 mm): 30°/15° CROSS SLIDE: Max travel: 170 mm Rapid traverse: 30 mm Plunge depth (diameter): 1.9 mm Feed rate 1: 0.03–1.5 mm/min Feed rate 2: 0.02–0.3 mm/min Plunge feed per impulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350 x 32 x 127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual stroke: 120 mm Swivel to right: 15°/30° Optional wheel guard for wheel set max width: 50 mm WORKHEAD: Swivel range: 0°–90° Spindle speeds: 80/175/380/800 rpm Internal taper: Morse 4 Collet type: W-20 Drive power: 0.5 kW Maximum workpiece weight: 20 kg Load for in-the-air grinding: 12 Nm Optional stepless drive speed range I: 30–300 rpm Optional stepless drive speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill travel: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centres: 400 mm Measured over 400 mm: 0.002 mm Between centres: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for in-the-air grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permissible voltage variation: –15% / +10% Permissible frequency variation: ±3% Compressed air: 5 bar All technical specifications are given without obligation and subject to errors or omissions.

Condition: used, Centre height 125 mm Csdjylcpkopfx Agrohd Distance between centres 400 mm Max. longitudinal travel 440 mm Grinding wheel 400x50x127 mm Max. grinding diameter 250 mm Max. table load 80 kg Max. workpiece weight between centres 80 kg Grinding wheel speeds: number (steps) 3, 1500-1800 rpm Angular displacement +/- 45° Workpiece spindle head: - stepless speeds 30-675 rpm - rotatable 90° Spindle taper 5 MT Tailstock taper 3 MT Table speed stepless 0.05-5.50 m/min External grinding wheel motor 3 kW Machine weight approx. 1500 kg

Condition: used, TECHNICAL DETAILS - centers height : 125 [mm] - max grinding length : 430 [mm] - max part diameter : 249 [mm] - max part weight : 100 [kg] - grinding wheel size : Ø400 x 63 x 127 [mm] - part holder headstock spindle speed : 8 - 800 [rpm] - max stroke X, Z : 320 , 650 [mm] - floor space : 2500 x 2000 [mm] - weight : 4700 [kg] EQUIPMENT - CN FANUC 18iTA - tailstock with fine adjustment - grinding head type URS - grinding head orientation each 0.1 degrees - inside grinding device with spindles Ø120 mm FISCHER type MFZ-1090 90000 Rpm and et type MFV-1230 12000-30000 Rpm - various grinding wheel flanges - grinding wheel extractor - 2 diamond dressing devices for inside and external grinding wheels Chsdpey Tb Aajfx Agrjd - active flagging device MARPOSS Kel-pos - tool-measuring system Kel-set - Kel set system - 3 jaws chuck

Condition: as good as new (ex-display), Year of construction: 2025, Offered is a external cylindrical grinding machine EMAG WPG 7 - external cylindrical grinding at the highest level and on the smallest footprint. Footprint of the WPG 7 is only 1,800 x 2,400 mm. The machine is perfect for machining small shafts or pinions. The WPG 7 can be loaded manually as well as by automated solutions (such as chain conveyors and linear gantry). Chedpfstlrkbox Agrod CONTROL Fanuc 0i TECHNICAL DATA Workpiece length: max. 250 mm grinding Ø: max. 80 mm Center height: 100 mm Center length: 380 mm Workpiece weight: max. 30kg Grinding wheel Ø: max. 500x 80 mm Price, delivery time and equipment of the machine according to agreement.

Condition: good (used), Year of construction: 2011, Maximum grinding diameter 290mm, maximum grinding length 800mm, grinding wheel size 290mm x 63mm bore. Control Fanuc 21i-TB, workhead speed 1,000rpm, spindle power 5Kw, table swivel +6/-3.5 degrees, Cedpfxjtudfds Agrjhd workhead swivel angle 0-90 degrees. internal spindle motor 1.5kw. fitted with coolant.

Condition: excellent (used), Year of construction: 2001, Description to follow! Cjdpfx Aozd E Tzogrshd

Condition: good (used), grinding diameter 450 mm grinding length 600 mm centre height 140 mm workpiece dia. 280 mm number of turns of spindle head 63 - 400 U/min grinding wheel speeds 20-35 m/s dimensions of the machine ca. 2,4 x 1,9 x 2,1 m Csdpfx Agexcblqjrehd

Condition: used, TECHNICAL DETAILS - center height : 320 [mm] GRINDING WHEEL HOLDER HEADSTOCK - Left grinding wheels dimensions : 400 x 50 x 127 [mm] - Right grinding wheels dimensions : 225 x 20 x 76,2 [mm] - Power : 3 [kW] - Spindle speeds : 3000 [rpm] Chedpfoyn R I Tox Agrsd - Orientation of grinding wheel holder headstock : 270 [°] PART-HOLDER HEADSTOCK - Orientation of part holder headstock : 360 [°] - Spindle speeds : 20 - 400 [rpm] - Spindle internal cone : Morse 5 - Power : 0.9 [kW] POWER SUPPLY - Supply voltage : 380 [V] EQUIPMENT - Automatic cycle work (rough part, finishing and reverse) - Heidenhain display - Coolant tank * with paper filtering unit - 1 internal grinding spindle : 12000 [rpm]

Condition: repair required (used), The TSCHUDIN HTG400 is available as a source of spare parts. Mechanically, the machine is in good condition. Electrically, the machine needs to be inspected and repaired. The drive motors are in good condition. The machine is being offered as a source of spare parts. Cedpoyt E Irefx Agrohd

Condition: used, Year of construction: 1994, Technical details: grinding diameter: 198 mm grinding length: 200 mm z-axis: längs:240 mm x-axis: quer: 340 mm control: Tschudin CNC E 9034B grinding wheel diameter: 500 mm centre height: 100 mm Distance between centres: 300 mm max. workpiece weight between centres: 100 kg interface: RS 232 total power requirement: 16 kVA weight of the machine ca.: 4,5 t space requirement of the machine approx.: L:3,1xT:3,2xH:2,0 m Plunge type grinding automatic technical specifications: - grinding spindle tool intake: 203,2mm - grinding spindle not swiveling - workpiece spindle swivelling : +30° to -90° - tailstock collet cone = MK 3 - control: ISO - and graphically programing equipment: - electronical balancing device : AB 100 T.K. - grindig wheel changing aid Chsdpfx Aou Ng A Nsgred - grinding disc dressing device (also for grinding forms programable) - cooling system with paper filtering system - Measuring device (out of function, integrated measuring control not connected) *

Condition: used, rand: DANOBAT Model: RT 1200 Useful support surface 1200 x 450 mm Cjdpfx Agozqrmzerehd Useful grinding surface (100 mm wheel) 1200 x 600 Useful grinding surface (50 mm wheel) 1200 x 550 Longitudinal travel X axis 1300 mm. Transverse travel Y axis 500 mm

Condition: good (used), Year of construction: 2001, total width: 700 mm, total length: 1,050 mm, total height: 1,400 mm, disc diameter: 250 mm, overall weight: 100 kg, Double brush polishing machine, with 2 exhauster stands, Motor 2-speed, 1,3 / 1,7 KW, speed 1400/2800 rpm., Dia brushes 250 x 25 x 60 mm, dimension 1050x700x1400 mm, weight 100 kg Cedjwhzh Eopfx Agrehd

Condition: used, TECHNICAL DETAILS - Distance between tips: 400 [mm] - Tip height: 125 [mm] - max. workpiece weight between tips: 150 [kg] - Z axis stroke : 600 [mm] - Z axis rapid feed : 15 [m/min] - Table orientation : +/- 6 [°] WHEELHEAD - grinding wheel dimensions: 500 x 80 x 203.2 [mm] - peripheral speed: 60 [m/sec] - Power : 9.5 [kW] - head position : -30 [°] WORKPIECEHEAD - Type of cone : CM5 - Speeds : 5 - 1500 [rpm] - Power : 2.1 [kW] - Bore : 34 [mm] TAILSTOCK - Cone : CM3 - Quill stroke : 80 [mm] POWER SUPPLY - Voltage: 400 [V] - Frequency: 50 [Hz] - Installed power: 16 [kVA] Chedjuhbxyjpfx Agred WEIGHT & DIMENSIONS - Machine floor space : 3.650 x 3.050 [mm] - Machine height : 2.000 [mm] - Machine weight : 4.850 [kg] MACHINE HOURS - Number of working hours : 42000 [h] EQUIPMENT - CNC : Siemens 840 D - Remote electronic handwheel - Automatic tailstock - Diameter and length control - Loading/unloading robot - Cooling unit - Coolant tank - Oil mist extractor - Wheel diamer - 2nd grinding head with CBN wheel and rotary wheel dresser - Fire extinguisher * *NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: used, TECHNICAL DETAILS - Centers height : 125 [mm] - Distance between centers : 400 [mm] - Grinding wheels dimensions : 400 x 127 x 50 [mm] - Power : 4 [kW] - Max. part weight : 30 [kg] - Floor space : 3000 x 3520 [mm] - Weight : 4000 [kg] EQUIPMENT - CN FANUC 21i-T - B axis with 1° precision - Chuck 3 jaws - Tool-holder flanges - 1 external grinding wheel - 1 diamond grinder - Tail stock with fine adjustment - 1 internal grinding devices with spindle 42000 rpm - Coolant tank with paper filter Chodjuhbxtspfx Agrjd - Part probe

Condition: used, TECHNICAL DETAILS - distance between centers : 200 [mm] Csdpfxjuhbxmo Agrjhd - centers height : 100 [mm] - strokes (X/Z) : 130 / 170 [mm] WHEELHEAD - grinding wheels dimensions : 400 x 63 x 127 [mm] - peripheral speed : 45 [m/sec] - power : 3 [kW] - positioned at : 30 [°] WORKPIECEHEAD - type of cone: MT4 - speeds : 600 - 3000 [rpm] - power : 0,5 [kW] - C axis indexing precision : +/- 0,5 [°] TAILSTOCK - type of cone : CM2 - quill stroke : 30 [mm] ELECTRICAL SUPPLY - voltage : 400 [V] - frequency : 50 [Hz] - installed power : 19 [kVA] DIMENSIONS - floor space : 1760 x 2180 [mm] - height : 2630 [mm] - weight : 4.000 [kg] HOURS - under power : 46.943 [h] - working hours : 21.529 [h] EQUIPMENT - CNC FANUC 16TB - soft options : Studer Release B, Pictogramming - interface : RS232C - electronic deported handwheel - direct measuring rules on axes X/Z - tailstock with fine concentricity adjustment - tailstock pinole hydraulic recoil - swiveling dressing wheel upon table : FISCHER AES-72x230/3 - dynamic wheel balancing device : DITTEL HBA 4000 - prepared for diameter sensor : MOVOMATIC ES400 - prepared for parts loading/unloading robot : FELSOMAT - automatic front door - prepared for cooling - electrostatic aspiration : ELOSTA BF2000 - pneumatic collets chuck - 1 wheel-holder - 1 grinding wheel - support arm for zero gravity wheel change - 1 balancing shaft

Condition: used, Year of construction: 1996, machine/vehicle number: xxxx, Lg.no. 24265 Technical data: - Shaft holder 35 mm - Shaft groove length 90 mm Chedstx Ubrspfx Agrjd - Drive speed 1450 rpm - Drive 400 V / 4.4 kW - Space requirement approx. W 1300 x H 2500 x D 800 mm - Weight approx. 200 kg

Condition: refurbished (used), functionality: fully functional, year of last overhaul: 2026, ⚙️ Studer S20 Favorit – Universal cylindrical grinding machine 400 x 100 mm ⚙️ 🔝 Latest version with PLC and updated automation 🔹 High-precision cylindrical grinding machine for external and internal grinding. 📐 Main features: ↔️ Distance between centers: 400 mm 📏 Center height: 100 mm 🇪🇺 CE marking 🔧 Completely rebuilt (full retrofit) to offer performance and precision comparable to that of a new machine. 🛠️ Equipped with renewed components and carefully adjusted to ensure maximum reliability and precision. 🧰 Wide range of accessories available. 📅 Delivery time: available for immediate delivery! 📸 Photographs of our finished machine. 🏷️ Project reference: OP26-003 Chodpfx Agozcytbjrod For more technical information, pricing, or details about the machine, please do not hesitate to contact us.

Condition: refurbished (used), Year of construction: 2026, center height: 100 mm, center width: 680 mm, total length: 620 mm, grinding diameter: 199 mm, Condition of the machine: The machine is currently in a used, unrevised condition. All wearing parts of the machine are replaced, including the feed spindle in the X-axis, and all assemblies are restored to a new condition. After the revision, the machine is easily comparable to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to a new condition. After the work is completed, the machine receives a measurement report according to the manufacturer's original specifications. Electronics: The electronics and the control cabinet housing are completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is overhauled and the hydraulic lines are replaced with new lines. Painting: As soon as the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are freed of the old paint, cleaned and repainted. Technical data of the machine: Center height: 100 mm Center width: 680 mm Grinding length: 620 mm Grinding wheel: 350 x 50 x 127 Weight and space requirement of the machine: Cjdpfx Aev Hqlrsgrshd 2600kg // 2320x1400x1450 mm Machine equipment (standard): • 1 piece grinding headstock Ø35 • 1 piece workpiece headstock MK5 • 1 piece protective cover for discs Ø 400 mm • 1 piece tailstock MK 3 standard • 1 piece flange Ø 127 mm • 1 piece hydraulic unit • 1 set of operating tools and operating instructions

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 1, center height: 150 mm, center width: 480 mm, grinding diameter: 299 mm, New arrival 1 Hydraulic Universal External and Internal Cylindrical Grinding Machine TSCHUDIN HTG 410 U – Year 1988, partial overhaul in 2026 – 150 mm center height x 480 mm center distance – workpiece spindle head MK 5 with stepless speed adjustment. Grinding wheel left and right – swiveling internal grinding attachment with 18,000 RPM Csdpfx Aevdumbogrehd Machine equipped with four-axis digital readout – X-axis – Y-axis and rotary encoder with one-micron resolution when swiveling the universal grinding spindle head and workpiece spindle head! Pneumatic air cushion lifting for effortless swiveling of workpiece spindle head and grinding spindle head. Machine includes four-jaw chuck, halogen lamp, paper band filter, folding dresser, and balancing arbor. Guideways in X-axis newly scraped – machine thoroughly inspected by specialist. Automatic cycle with "rapid traverse to automatic infeed – dwell time – retraction – infeed dimension remains set". Very little used machine from prototype manufacturing! Price on request (Domestic sales plus 19% VAT.) Technical data not binding – subject to prior sale and errors. Best regards, INDUBA GmbH Mathias Becker D-78628 Rottweil

Condition: excellent (used), grinding diameter 155 mm grinding length 400 mm centre height 80 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : STUDER (CH) Universal Precision Cylindrical Grinding Machine Model S 20-12 Year Chjdpfszbczxox Agred Height of centers / Grinding Ø 80 / 160 mm Center distance / Grinding length Z-axis 400 / 420 mm Internal Grinding Ø mm Workpiece weight flying / between centers max. 5 / 20 kg Table speeds 0,1 – 3,5 m/min Table way automatic, min. 1 mm Table swivable max. 30 ° Universal Grinding Head cross way max 170 mm Rapid infeed way 30 mm Infeed way 1,9 mm Feeds 0,001 – 0,04 mm/Ø Swivable 10 / 30 ° Grinding wheel dimension : bore x width x Æ 127 x 30 x 300 mm Internal Grinding device separately mounted mm Workhead Fitting taper/conus MK 2 Speeds 60 – 1.200 rpm Spindle drive 2,2 kW Total electric load approx.. 5 kW - 400 V – 50 Hz Weight approx. 1.000 kg Accessories / Special Features: • Electrohydraulic conventional control with PHILIPS Digital Readout for the infeed (x-axis) • Preinstalled automatic cycles for plunge-in grinding, traverse grinding, internal grinding with roughing, finishing, fine-finishing, spark-out • Separately mounted Internal Grinding Device with belt-driven internal grinding spindle • Workhead with Quck-release collet chuck, swivable 90° • (right now the machine is not equipped with a tailstock, an original STUDER tailstock; used can be supplied for approx.. EUR 5.000,--) • Wet grinding equipment with coolant filtration unit, separate electric cabinet, manuals Condition : Very good ! Universal machine for all sorts of grinding tasks ! Video : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, before loading

Condition: used, grinding diameter 660 mm grinding length 2000 mm workpiece weight 1500 kg grinding wheel diameter 400 mm control X-As. Diatos 602 total power requirement 12/22/30 kW Including: With Diamant Wheel / Plunge Grinding With Spark out / Face Grinding The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Cjdpsyqtg Djfx Agrohd than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 06.E.400.020, Manufacturing origin CH Voltage 3x400V - 24(V – DC) Netweight 5500 kg Dimensions 237x206x195 cm TECHNICAL DATA Control Fanuc 21i-MB 3 axes U : work wheel axis W : workpiece / dressing axis X: drive wheel axis Through feed grinding Workpiece diameter Ø 1.5 - 50 mm Plunge grinding Workpiece diameter Ø 1.5 - 100 mm Grinding length max 270 mm Grinding wheel Max. external diameter Ø 400 mm Inner diameter Ø 203.2 mm Max. speed 50 m/sec. Drive power 11 kW Optional drive power 29 kW Regulating wheel Max. external diameter Ø 250 mm Inner diameter Ø 127 mm Speed 5 - 1'000 min-1 Tilting angle +5° / -5 Drive power 3.7 kW Positioning accuracy In all 3 axes 0,1 µm Resolution of glass scales 0.05 µm Dimensions Length 2060 mm Width, (with door open) 2370 mm (3120 mm) Height, (with door open) 1950 mm (2100 mm) Weight 5500 kg Compressed air Max. pressure 16 bar Air consumption 165 L/min Air consumption with straightening spindle 250 L/min Temperature +15° / +40° C. Chodpfx Ageiqt S Ajrjd errors and omissions excepted-data given without obligation

Condition: used, Year of construction: 1996, grinding diameter 5 - 255 mm grinding length 400 mm centre height 130 mm grinding length at plunge grinding 50 mm control SINUMERIK 805 grinding spindle speed 25 - 1400 U/min Chodpfx Aotqqtrogred work piece spindle speed 0 - 500 U/min feed of grinding spindle slide cross 0 - 5000 mm/min table speeds 0 - 5 m/min grinding wheel diameter 450 mm total power requirement 10 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,65 x 2,2 x 2,35 m Accessories: grinding wheel with flange, 3-jaw chuck, electron. hand wheel

Condition: good (used), Grindable, largest diameter: 200 mm Center distance: 450 mm Weight of the machine approx: 2, 2 t Chedpfx Aslz Nxwsgrjd Machine dimensions: