Complete sawmill (stationary)

Boldrew Bandsägemaschine Typ A-1200 Z

Condition: used, No. 3264 Complete sawmill Möhringer / Paul Used, still connected to power until 30.06.26 Consisting of: - Log crosscut table with driven tapered rollers Length measurement Hecht with remote-controlled photoelectric sensors - 1 cross conveyor to the frame saw, 7000 x 5500 mm LW Cam chains in mint condition - 1 cross conveyor, 3800 x 4000 mm LW - 1 roller conveyor in front of the frame saw, length 12400 mm, roller width 1400 mm With hydraulic lowering and lifting for sawn timber, cross-discharge with 2 flap gates - Quick-clamping frame carriage EWD with auxiliary carriage - 1 auxiliary conveyor for log feeding in front of the frame - Root reducer Möhringer - Frame saw Möhringer B 75-55 Multi-BV, year of construction 1994 Passage 700 mm, stroke 550 mm, saw blades hydraulically adjustable, conveyor belt, log loading device with adjustable laser, round timber measurement Hecht, clamps Jansen, hooks, 60 saw blades, adjustment gauge - Powered splitting wedge with chain bed Möhringer 230-292, year of construction 1994 With pre-cutting, photoelectric sensors, and laser for adjustment - 1 roller conveyor 4000 x 1400 mm LW, with grooved rollers, cross-feed with pneumatic cylinders - 1 S-conveyor with storage 3500 x 4000 mm LW, flights Albert made of square tube - 1 S-conveyor 3000 x 5500 mm LW, motor with adjustable slip clutch, function monitoring, drive elements made of angle iron - 1 under-table cross-cut saw Paul 15 AO, year of construction 1992 - 1 double edger Paul KME 2 / 750 R, year of construction 1988 With splinter separator, right-hand side unit electrically adjustable, through-feed cross-cut unit, length sorting system, preselection programs Österle - 1 conveyor belt 7400 x 400 mm LW - 1 conveyor belt 4000 x 400 mm LW - 1 conveyor belt 3000 x 500 mm LW - 1 trough conveyor approx. 6500 x 500 mm LW, ascending, for sawdust - 1 trough conveyor HOLTEC approx. 6500 x 500 mm LW, ascending, for wood chips - 1 trough conveyor HOLTEC, horizontal, with left and right rotation as a distributor over the boxes - Drum chipper HAAS, feed width 600 mm, feed height 150 mm, with vibrating chute - Frame saw sharpening machine OPL - Saw blade tooth setting machine VOLLMER GSA, year of construction 1996 - Frame saw sharpening machine VOLLMER (needs minor repairs, push cylinder bent) Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Kjdpfx Abeyzr Tfefjlu Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: good (used), functionality: fully functional, Year of construction: 2012, operating hours: 20,200 h, load capacity: 5,500 kg, fuel type: gas, Equipment: clamp, gripper hydraulics, For sale is a Hyster S 5.5FT gas-powered forklift. The forklift is fully functional and in good condition. Not offered with forks as shown, but with a Mayer paper roll clamp with rotary hydraulics from 2005 (last photo). Kledjwalyiopfx Abfou Technical specifications: Year of manufacture: 2012 Rated load: 5500 kg (5.5 tonnes) Load center: 600 mm Turning radius: approx. 2375 mm - 2534 mm Lift height: up to 5300 mm Free lift: available Transmission: DuraMatch™ 1-speed or DuraMatch™ 2-speed Travel speed (loaded/unloaded): approx. 16.7 - 17.2 km/h Dimensions: approx. 3,500 mm * 1,420 mm * 2,500 mm mm Weight: approx. 7,800 kg Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website

Condition: excellent (used), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, equipped with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed unit Planer/moulder with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed, frequency-controlled, 8–80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th universal spindle 11.0 kW (four-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/stop brake units • Pneumatically supported top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced spacing between feed rollers • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Connected load approx. 145 kW / approx. 400 A • Free-standing electrical cabinet Kedjwvqklspfx Abfjlu • Operating instructions, spare parts list and wiring diagram included • Machine sold without cutterheads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL bearings All motors newly fitted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other new parts fitted in the machine Condition: see attached photos – technically in excellent condition Infeed mechanization unrefurbished – complete – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale excepted.

Condition: new, Hydraulic cable winch HAW1700 with electric valve incl.manual operation and radio remote control for mounting on wood splitter, crane, mini excavator, tractor, stacker, mower crawler and telescopic loader, in viticulture and horticulture, agriculture, construction and forestry and many other applications. With electric hydraulic valve and radio remote control. With the HAW1700 hydraulic winch you can make many tasks easier. Maximum cable capacity 30 m with 6 mm wire rope. Basic equipment 20 m 6 mm wire rope ⦁ Pulling firewood to the log splitter and setting it up ⦁ Pulling logs onto a trailer ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and small excavators ⦁ As a winch for small tractors and narrow-track tractors Kljdpfefn Tvhex Abfsu A robust steel construction with screw-on options on both sides (bottom, back, top) with M 12 thread. This gives you the possibility to use the winch flexibly. Large rope pulley mounted on bearings on both sides for long service life of the wire rope. The standard pulling force is 1700 kg. The winch can be installed in various positions. A hydraulic brake is available as an option. Depending on the pulling speed and pulling force you need, we can offer you different options. Please contact us, we will be pleased to advise you. ⦁ Maximum working pressure: 225 bar peak ⦁ Continuous operating pressure: 175 bar ⦁ Displacement: 400 ccm ⦁ Torque at 225 bar: 870 Nm peak ⦁ Torque in continuous operation 380 Nm ⦁ Maxima [...]

Condition: used, Year of construction: 2006, operating hours: 14,754 h, Equipment: all wheel drive, Atlas Terex 1905 Ksdpfx Aotplq Iebfslu Year of construction: 2006 Engine power: 114 KW hammer piping, air conditioning, quick coupler

Condition: new, Precise, quiet and reliable drill press. Built to strict accident prevention standards. Precision spindle axis with tempered morse taper, base plate machined. Electronic speed variator included. Rotary table + vise mm 350 X 250. Kedpfx Aboir Aihefolu Drilling capacity on steel :R50 mm ø 22. Tapping capacity on steel :R50 mm M 14. Spindle taper :CM2 Spindle stroke :mm 90. Spindle sleeve diameter :mm 52. Column diameter :mm 98. Spindle center column distance :mm 201. Transmission PU Electronic variable speed drive (E). Spindle speed :Rpm 270 ÷ 4,200. Motor power :kW 0.75 / 220 V Single phase. Dimensions :( h x w x d ) mm 1950 x 600 x 680. Weight :Kg 220.

Condition: new, Year of construction: 2025, MAX MAMMUT 400-500-600: High speed log profiling line (up to 600 mm in diameter) for the production of prisms, "river use", "trieste use" beams, boards in general and semi-finished products for pallets. FULLY HYDRAULIC MACHINERY Kljdehpbthepfx Abfju Minimum diameter of logs 120 mm Maximum diameter of logs 600 mm Minimum working length mm 1.800 Maximum working length mm "Infinite" (∞) Tool holder shaft diameter 60-80 mm Cutter diameter mm 300 Feed speed mt / min. 5 - 70

Condition: used, Year of construction: 1997, Line 3 Stenner MHS9 machines from 1997 Kodpfjw Nrhksx Abfjlu

Year of construction: 2022, operating hours: 6 h, condition: like new (used), functionality: fully functional, 3 pieces of nearly new PROLAIN dryers, each approx. 170 m³. Further technical data available on request. Sale on behalf of customer. Kjdpoxcifrsfx Abfelu

Condition: good (used), Year of construction: 1993, Rotor width 800 mm 22 kw motor 20 knives on rotor 25 mm concave Klodep H Sv Dspfx Abfou There is also a wooden frame to put the chipper higher so that a conveyor belt fits in below