Used injection molding machines with a clamping force of 250 - 999 kN for sale (263)

Condition: not inspected (used), Year of construction: 1997, operating hours: 145,298 h, functionality: unexamined, machine/vehicle number: 31378, total length: 6,500 mm, total width: 2,000 mm, total height: 2,200 mm, A used machine from a site closure is being sold. Sale is made excluding any warranty for defects. Dcedpfx Ajzqabmedyek The machine has not been inspected but was in working order until the end. Weight approximately 9000 kg.

Condition: used, Year of construction: 2000, operating hours: 65,000 h, functionality: unexamined, machine/vehicle number: BA 850 CD Plus, clamping force: 850 kN, screw diameter: 1 mm, clearance between the columns: 1 mm, column diameter: 1 mm, displacement volume: 1 cm³, injection pressure: 1 bar, injection weight: 1 g, mold height (min.): 1 mm, ejector force: 1 N, ejector stroke: 1 mm, total length: 1 mm, total width: 1 mm, total height: 1 mm, type of input current: AC, input frequency: 50 Hz, input voltage: 360 V, input current: 1 A, 4x Battenfeld BA 600 / 850 CD Plus - EX LEGO - 38.641h / 73.827h - Dry Storage Location: 5932 Humble, Langeland Island, Denmark - BRIDGE CONNECTED - NO FERRY NEEDED! Storage: Dry indoor hall, immediately available Dcodpfxezp Hy Ho Adysk History: All machines from same LEGO subcontractor - only clean material - maintained to LEGO standards - BA CD Plus series with Unilog control FOR SALE - 4 MACHINES: 1. Battenfeld BA 600 CD Plus - 38,641h documented - 57A Motor / 97A Heating - 380V/220V + Trafo - 50Hz - RS232 - Good condition 2. Battenfeld BA 600 CD Plus - Good condition - 57A Motor / 97A Heating - 380V/220V + Trafo - 50Hz - RS232 3. Battenfeld BA 850 CD Plus - 73,827h documented - 80A Motor / 27A Heating - 380V/220V + Trafo - 50Hz - RS232 - Good condition 4. Battenfeld BA 850 CD Plus - Poor condition / donor for spare parts Condition: All machines running until dismantling. Hour meters 38,641h - 73,827h Technical: Standard 400V / 220V + transformer, 50Hz, RS232 interface Loading: Crane required approx 3.5-5.0t per machine. Bridge connected - no ferry cost. Price: 3.500 EUR each EXW 5932 Humble, Denmark Package Price: 12.000 EUR for all 4 EXW Contact for more photos/information - Videos available on request.

Condition: good (used), Year of construction: 2007, Ref. no.: 18597 Manufacturer: ENGEL Type: insert 200 H/70 CC 200 Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products. Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results. The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production. The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production. The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition. The ENGEL INSERT series is particularly suitable for: * insert molding applications Dcsdpfxsy Au I Ue Adyjk * metal/plastic combination parts * electronic component production * connector and cable technology * technical plastic parts * precision industrial products With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.

Condition: good (used), Year of construction: 2013, Ref. no.: 18494 Manufacturer: ENGEL Type: Victory 50-200 Spex Year of construction: 2013 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Mould height min.: 200 mm Opening width: 600 mm Platen size (h x v): 500 X 450 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2400 bar Measurements and weight Dimensions: 3,4 x 1,3 x 1,8 m Machine weight: 2900 kg Additional information & extras Core pull: 1 pcs Further information: ENGEL ENGEL Victory 50 SPEX (2013) – Tie-Barless Injection Moulding Machine For sale is a high-quality ENGEL Victory 50 SPEX injection moulding machine from 2013. Featuring tie-barless technology and a special SPEX configuration, this machine is ideal for precise and flexible production. Key Advantages: Tie-barless design → maximum mould accessibility SPEX special configuration → optimized for specific applications High precision & repeatability Energy-efficient operation Compact design → space-saving Automation-ready (robot interface possible) Applications: Automotive industry Electronics Medical parts Technical plastic components Dcjdpjxzq Skofx Adyok 👉 Machine in good working condition. Inspection possible upon request.

Condition: good (used), Year of construction: 1994, Ref. no.: 17540 Manufacturer: ARBURG Type: 270 C 500-100 RUNHOUR Only 100 Year of construction: 1994 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 270 X 270 mm Mould height min.: 200 mm Platen size (h x v): 405 X405 mm Injection unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight: 61 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,3 X 1,5 X 2,0 m Machine weight: 2400 kg Further information: Laboratory Machine with Exceptionally Low Operating Hours The offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes. The control system shows only approximately 100 operating hours and just 867 machine cycles. The machine is equipped with a hydraulic drive system and the proven ARBURG Dialogica control unit. In addition, it features an integrated crane system to facilitate mould and component changes. Djdpeyiz U Tefx Adysck The scope of supply also includes an unused spare screw with a diameter of 15 mm and a complete additional plasticizing unit, providing extra flexibility for different applications. Due to its exceptionally low usage, documented history, and valuable additional equipment, this machine represents a rare opportunity on the used machinery market.

Condition: good (used), Year of construction: 2005, Ref. no.: 16369 Manufacturer: BATTENFELD Type: EM 75-120 Unilog B4 All-electric Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg Further information: BATTENFELD EM 75/120 UNILOG B4 All-Electric Precision Injection Moulding Machine The BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes. All major machine movements are driven by modern servo motors, providing: * very low energy consumption * high repeatability and precision * smooth and quiet machine operation * low maintenance requirements Dodjwl Rucopfx Adyeck * stable and accurate production performance The machine is especially suitable for: * technical plastic components * electronic parts * precision moulded products * small and medium-sized production runs Compared to conventional hydraulic machines, the all-electric technology offers significantly improved energy efficiency and process stability. Equipped with the reliable BATTENFELD UNILOG B4 control system, the machine provides: * user-friendly operation * precise process control * stable cycle times * accurate servo axis management The machine has approximately 69,094 operating hours and appears to be in clean and well-maintained condition. The photos clearly show: * a clean electrical cabinet * well-maintained mechanical components * properly kept servo-electric units * a clean injection unit The BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic injection moulding applications.

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 80-380 CX Injection Moulding Machine Year of manufacture: 2010 Clamping unit Clamping force: 800 kN Mounting plate dimensions (H × V): 670 × 670 mm Space between tie bars (H × V): 420 × 420 mm Mould height (min./max.): 250 mm Maximum opening: 750 mm Injection unit Screw diameter: 40 mm Injection volume: 201 cm³ Shot weight (PS): 183 g Dsdpexw Upfofx Adyjck Injection pressure: 1860 bar Electro-hydraulic equipment Pump motor power: 15 kW Heater power: 10.9 kW Dimensions and weight Machine dimensions (L × W × H): 4.09 × 1.48 × 2.02 m Weight (with control cabinet): 3.55 t

Condition: excellent (used), Year of construction: 2020, WOOJIN PLAIMM TE 50 INJECTION MOLDING MACHINE Technical specifications: Machine type: electric injection molding machine Year of manufacture: 2020 Operating hours: Auto: 44,097 h Motor: 3,719 h Additional counter: 28,454 Clamping force: 490 kN Injection volume: 34 cm³ Screw diameter: 22 mm Injection weight: approx. 30–35 g PS Maximum mold opening stroke: 250 mm Column spacing: 360 x 360 mm Platen dimensions: 530 x 580 mm Minimum mold height: 130 mm Centering hole diameter: 125 mm Dsdpfxsy Ulfzs Adyjck Maximum injection pressure: 2184 bar Total power: 20.7 kW Machine weight: 3600 kg Machine type: electric (E) The machine is in very good technical and visual condition. It has been regularly used in serial production and is available for inspection while in operation.

Condition: excellent (used), Year of construction: 2007, Engel Victory 330/60 TECH Injection Moulding Machine Year of manufacture: 2007 Clamping unit: Clamping force: 600 kN Dcodpsxwviajfx Adyok Platen dimensions (table): 720 mm Mould height: 600 mm Opening stroke: 900 mm Ejector stroke: 115 mm Ejector force: 125 mm Injection unit: Screw diameter: 35 mm Shot volume: 154 cm³ Injection pressure: 2,400 bar Machine weight: 5,300 kg

Condition: excellent (used), Year of construction: 2006, Arburg 320 C 400-170 Injection Moulding Machine Year of manufacture: 2006 Dcodpfexwu R Nex Adyjk Clamping force: 40 t Screw diameter: 30 mm Distance between tie bars: 320 × 320 mm Maximum injection volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Maximum screw speed: 400 rpm Nozzle stroke: 250 mm Nozzle contact force: 40.6 kN Heating power: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW Machine length: approx. 3.4 m Machine width: approx. 1.4 m Machine height: approx. 2.0 m Machine weight: approx. 2,400 kg

Condition: excellent (used), Year of construction: 2008, Injection molding machine BATTENFELD HM 60/350 S Year of manufacture: 2008 Injection elements: Screw diameter: 35 mm Injection weight : 153.8 g Injection pressure: 2083 bar Injection volume: 169 ccm Closure elements: Closing force : 60 t Clearance between columns: 370x320 mm Dimensions of table plates max: 550x530 mm Ejector: hydraulic Closing system: hydraulic Control: UNILOG B6 Additional equipment: Dodpfjk Rnq Njx Adyeck Machine in very good technical condition Euromap 67 Dimensions: Weight: 3100 kg Length/Width/Height: 3.79x1.24x1.88 m Power supply: Pump/motor: 15 kW Heaters: 10.4 kW Total: 25.4 kW

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 50 - 100 AX injection molding machine Electric injection molding machine Year of production - 2011 Working hours 47799 Operator language: German, Romanian, Czech Closing unit - Mold closing force: kN 500 - Mold opening force: kN 39.9 - Dimensions of the mounting plate (hxv): mm 510 X 460 - Distance between columns (hxv): mm 410 X 360 Injection unit - Screw diameter: mm 25 Dsdsv Hxgqjpfx Adyjck - Injection pressure: bar 2025 - Injection volume: cm3 49 - Injection weight for PS: g 45 Dimensions and weight - Net weight with control cabinet: t 3.9 - Machine dimensions (length x width x height): m 4.13 x 1.6 x 1.8

Condition: excellent (used), Year of construction: 2011, BATTENFELD 35/75 PLUS INJECTION MOLDING MACHINE Technical specifications: Year of manufacture: 2011 Operating hours: 89,192 h Clamping force: 350 kN Injection volume: 25.4 cm³ Injection shot weight: approx. 23–27 g PS Screw diameter: 18 mm Maximum mold opening stroke: 200 mm Column spacing: 270 x 260 mm Platen dimensions: 470 x 280 mm Minimum mold height: 150 mm Centering hole diameter: 110 mm Maximum injection pressure: 2034 bar Hydraulic oil volume: 125 dm³ Total power: 28 kW Machine weight: 1050 kg Machine type: hydraulic Control system: BATTENFELD UNILOG B2 Dedpfsy Uk Axex Adysck The machine is in very good technical and visual condition. A larger number of machines in the same configuration are available – a total of 12 units manufactured in 2010–2011.

Condition: used, Year of construction: 2007, clamping force: 50 kN, displacement volume: 27 cm³, injection pressure: 2,760 bar, overall weight: 2,300 kg, screw conveyor diameter: 20 mm, terms of delivery: FCA Pegnitz delivery time: on request Dedezmi A Sopfx Adyjck terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2000, (1) Injection Moulding Machine, Handling: Wittmann | WX142-0325 | 2023 Miscellaneous: 1x protective enclosure Dsdoy N R Uqspfx Adyeck 1x handling system, Wittmann Series 9 1x conveyor belt incl. box-changing function 1x V2A reject chute 1x Euromap 12/67 conversion 1x external hot runner unit, Mold Masters M1-06-12 (year of manufacture 2016), 12 zones 1x conveyor unit, Motan Technical Details: Power supply: 3x400 V Frequency (Hz): 50 Current 1 (A): 196 Current 2 (A): 110 Current 3 (A): 86 Current 4 (A): 67 Weight (t): 9.7 Pressure (bar): 190 Flow rate (l/min): 190

Condition: used, Year of construction: 2003, (1) Injection molding machine, Handling: Sepro Robotique | Success 7 | 2016 Temperature control: HB Therm | Miscellaneous: 1x Protective Enclosure 1x Conveyor Belt, company RAU Maschinenbau 1x Hot Runner Controller 1x Conveyor Belt, company SAS Grillet 1x Conveyor Unit, company Motan Technical Details: Djdjy N R U Rjpfx Adyjck Machine size: 500/370-200 Power supply: 3/N/PE AC 400 V Frequency (Hz): 50 Current (A): 94 Weight (t): 3.3 Pressure (bar): 210 Flow rate (l/min): 130

Condition: used, Year of construction: 1999, functionality: fully functional, clamping force: 400 kN, screw diameter: 30 mm, clearance between the columns: 250 mm, column diameter: 50 mm, opening stroke: 480 mm, plate length: 450 mm, plate height: 500 mm, total length: 2,200 mm, total width: 1,200 mm, total height: 1,800 mm, overall weight: 2,800 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Complete plastic molding line OLEOPRESS OP/Z 40 press + 3M OPZ 50 oven + PGV thermoregulator For sale: a complete line for plastic molding, consisting of: OLEOPRESS OP/Z 40 hydraulic injection press 3M OPZ 50 industrial electric oven PGV RHC7 mold thermoregulator Machines are in working order and can be inspected on site. INJECTION PRESS Manufacturer: OLEOPRESS S.r.l. (Italy) Model: OP/Z 40 Year: 1999 Clamping force: 400 kN (40 tons) Configuration: Horizontal – 4 columns Dodszpbc Aspfx Adysck Technical data: Distance between columns: 250 × 300 mm Column diameter: 50 mm Maximum opening stroke: 480 mm Plate dimensions: 400 × 500 mm Cylinder heating capacity: approx. 6–8 kW Power supply: 400 V – 50 Hz – 100 A – three-phase Air line pressure: 10 bar Estimated weight: approx. 2,800 kg INDUSTRIAL OVEN Manufacturer: 3M Forni Industriali (Italy) Model: OPZ 50 Power supply: 400 V Installed power: 36 kW (18 + 18 kW) Maximum temperature: 650°C High-temperature industrial electric oven, suitable for: mold preheating post-curing polymerization of thermosetting materials MOLD THERMOREGULATOR Manufacturer: PGV srl (Italy) Model: RHC7 Power supply: 400 V Rated current: 28.6 A Interrupting capacity: 17.6 kA Unit for controlling mold temperature during the production cycle.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 28,701 h, clamping force: 800 kN, Vertical injection moulding machine manufactured in 1998. This Arburg 1200 TS 800-60-350 features a clamping force of 800 kN and includes two injection units: a vertical unit with a Ø22 mm screw and a horizontal unit with a Ø35 mm screw. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 1200 TS 800-60-350 machine we have for sale. Contact us for further details. • Clamping Force: 800 kN • Number of Injection Units: 2 • Injection Unit 1: Vertical, Ø22 mm screw • Injection Unit 2: Horizontal, Ø35 mm screw • Operating Voltage: 400 V • Phase: 3~ • Frequency: 50 Hz Dedpfx Adozlqtcoysck • Connected Load: 55.9 kW • Rated Current: 93 A • Control Voltage: 24 V DC • Protection Class: IP54 • Hydraulic Pressure: 210 bar • Rotary Table: Yes • Safety Enclosure: Yes • Pump Operating Hours: 35,290 h • Automatic Operating Hours: 28,701 h

Condition: used, Year of construction: 2009, Due to a relocation of our production facilities abroad, we now have two injection molding machines of the EL Exis / Sumitomo Demag brand available. These are the EL Exis S 200 - 840 and 300 - 1450 models, manufactured in 2009, which we would like to offer you on a non-binding basis. Dcsdpjznwahofx Adyek The machines have been operated in our facility on a two-shift system. Only clear, glass-like PP random copolymer was processed. In addition to the injection molding machines, the side-entry robots from Wittmann are also included in the scope of supply.

Condition: used, Year of construction: 2006, Operating hours: 30,471,625 Clamping force: approx. 800 t Tie bar spacing: approx. 420 mm Flow rate: approx. 103 l/min Frequency: 50 Hz Power supply: 400 V Pressure: approx. 210 bar Current: 82 A Weight: approx. 4.0 t Dedpfx Adezlg Uveysck

Condition: excellent (used), Year of construction: 2004, Boy 90 M Year of manufacture: 2004 Injection unit: Screw diameter: 42 mm Injection weight: 193 g Injection pressure: 1724 bar Metering volume: 214.7 ccm Clamping unit : clamping force: 90 t tie bar distance: 430x360 mm size of clamping platens: 635x610 mm ejector: hydraulic clamping unit: hydraulic Control: Procan - touch screen Additional equipment: Euromap 12 Robot interface Air valve x 1 Dimensions: Weight: 3100 kg Length/width/height: 4.37x1.21x2.20 m Dodpfx Aszc I U Tedysck Drive: Pumps/motor: 15 kW Heating power: 11,3 kW Total power: 26,3 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2016, Boy 55A Pro / Operating hours: 18,153 in automatic mode / Machine in very good technical condition. Year of manufacture: 2016 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Injection pressure: 1508 bar Metering volume: 136.1 ccm Clamping unit: Clamping force: 55 t tie bar distance: 360x335 mm size of clamping platens: 665x600 mm ejector: hydraulic clamping unit: hydraulic Control system: Procan Alpha - touch screen Additional equipment: Machine in very good technical condition Operating hours: 18.153 in automatic mode Pneumatic core x 2 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/width/height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating power: 7,7 kW Total power: 18,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Djdpfx Aezc Naqsdysck Price: Upon request

Condition: excellent (used), Year of construction: 2012, Arburg 680CB 400-170 / Vertical injection molding machine, tie-bar-less / Very good technical condition. Year of manufacture: 2012 Injection unit: Screw diameter: 25 mm injection weight: 54 g Injection pressure: 2500 bar Metering volume: 59 ccm Clamping unit : clamping force: 40 t tie bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Dodjzc Ng Dspfx Adysck Very good technical condition Vertical injection molding machine, tie-bar-less Euromap 67 Robot interface Air valve x 3 Hydraulic core puller x 3 Hot runner control x 12 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection It is possible to change the screw diameter The machine has been regularly serviced by the authorized service Arburg Original Arburg mold crane Dimensions: Weight: 6500 kg Length/width/height: 1.97x1.69x3.40 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2001, Arburg 320C 600-250 / machine in very good technical condition Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 121 g Injection pressure: 1820 bar Djdpfjzc Nl Tox Adysck Metering volume: 144 ccm Clamping unit: clamping force: 60 t tie bar distance: 320x320 mm size of clamping platens: 446x446 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Machine has produced molded parts for medical industry - pure production conditions Core pull control Injection unit hardened - bimetal Built-in sorting flap Dimensions: Weight: 2330 kg Length/width/height: 3.65x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2017, Arburg 370E 600-170 with Arburg Multilift Select robot / All-electric injection molding machine Year of manufacture: 11.2017 Injection unit: Screw diameter: 30 mm Shot weight: 77 g Injection pressure: 2000 bar Dosage volume: 85 ccm Clamping unit: Clamping force: 60 t Tie bar spacing: 370x370 mm Platen size: 510x510 mm Ejector: electric Clamping system: toggle Control system: SELOGICA - touchscreen Additional equipment: Production line with Arburg Multilift Select robot and conveyor belt All-electric machine: high-speed, energy-efficient, and very quiet Operating hours: h in automatic mode Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 24 zones Hardened injection unit – bimetallic Main motor: servo-driven with inverter for energy saving Injection unit driven by servo motor controlled by inverter Parallel movements Central lubrication Machine with two cylinders / nitrogen accumulator (extra charge for high-speed operation) Dcsdpfjzc Nm Rex Adyok Integrated Arburg conveyor belt and sorting flap Arburg Multilift Select robot, 6 kg, transverse Year of manufacture: 11.2017 4-axis robot: 3 axes servo-driven (electric), C axis pneumatically driven Stroke (axes): X-600, Y-800, Z-1800 mm Robot safety package Robot with adapter and safety housing Purchase of robot and conveyor belt possible at additional cost Dimensions: Weight: 3600 kg Length/width/height: 4.00x1.45x2.04 m All offered machines are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical demonstrations at our facility in Łódź. Price: On request