Used Machining centers (vertical) X-axis travel 600-699mm for sale (270)

Condition: used, Year of construction: 2002, Technical details: Cgjlqjviwg Ujv Hwbst x-travel: 600 mm y-travel: 410 mm z-travel: 520 mm tool change unit: 16 turning speeds: 8000 1/min control: SIEMENS 810 shopmill table surface area: 840 x 420 mm rapid traverse X- and Y-axis: 36 m/min rapid traverse Z-axis: 20 m/min taper ISO: SK 40 spindle drive: 15 kW weight of the machine ca.: 2,5 t space requirements approx. LxWxH: 2,2 x 2,3 x 2,3 m vertical machining center, el. handwheel, no chipconveyor, approx. h "machine on", approx. h "spindle on" *

Condition: good (used), Year of construction: 2018, operating hours: 6,310 h, Functionality: fully functional, machine/vehicle number: 112029, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 305 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate Z-axis: 20 m/min, controller model: Brother C-00, table width: 800 mm, table length: 400 mm, table load: 200 kg, spindle speed (max.): 10,000 rpm, coolant supply: 30 bar, distance table to spindle center: 555 mm, distance table center to spindle nose: 625 mm, tool length: 200 mm, tool diameter: 80 mm, power: 26 kW (35.35 HP), Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BROTHER Speedio R650X1 HT machining center, first commissioning 2019 22 tools 26KW spindle drive High Torque Spindle holder BBT-30 10,000 revolutions Cgjlqv Hjq Hdzbjwbst Rotary shuttle table low version 2 pallets 30 bar internal cooling Twin chip disposal system - 2 chip conveyors in one system Emulsion mist extraction for cooling lubricant

Condition: good (used), Year of construction: 2004, operating hours: 39,000 h, Functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller model: Heidenhain Mill Plus IT, total height: 5,600 mm, total length: 9,000 mm, overall weight: 6,000 kg, For sale is a 5 axis machining center of the Makre DMU and type 50 eVolution Please note the GMN high frequency spindle spindle HCS 30.000 /15 and the 92-fold tool changer The machine is in good condition and fully functional Technical data Year of construction: 2004 Operating hours: approx. 39,000 h Control system: Heidenhain MillPlus IT Cgjlqv Hjtyit Eswbjt Table size: approx 500 mm ⌀ Traverse paths: X-axis: 500 mm Y-axis: 420 mm Z-axis: 380 mm A-axis: 0-180° C-axis: 360 ° Tool holder: HSK 50 Spindle speeds: max: 30,000 1/min Frequency: 500 Hz Power: 15 kW Tool places: 92 NO chip conveyor Space requirement according to drawing: 9,000*5,600 mm Transport dimensions: 2,800*3,700*2,800 mm Weight: 6,000 kg On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Fzho0bc Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: excellent (used), Working travels 620 x 470 x 400 mm Table size 700 x 450 mm Spindle taper SK40 Spindle speeds -10000 rpm Tool changer 20 Pos. Control FANUC 0iM Coolant through spindle With palett changer Cgslqv Hwevha Ifebjt MARCELS MASCHINEN CH

Condition: repair required (used), Year of construction: 2005, operating hours: 44,050 h, Functionality: not functional, machine/vehicle number: 2731660/C 0000, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, Machining center with chip conveyor and belt filter system. Travel X/Y/Z 600/400/425mm Speed range 20 to 18,000 1/min AC main drive 35/25 kW (40/100% ED) 3D path control SINUMERIK 840D powerline Tool change/ 25 magazine positions HSK-A 63 tool holder Shuttle table Clamping surface 2x660x400 mm Infrared measuring probe Heidenhain TS 641 Internal cooling lubricant supply (IKZ) 40bar / 23l/min / 600L container Scraper belt conveyor discharge height 1000mm incl. coolant tank 200L Gravity paper belt filter Rotating viewing window Oil and emulsion mist separator with mechanical filter Work area flushing - chip flushing Flow rate: 100l/min Pressure: 1bar Electronic handwheel SIEMENS SINDIC data transmission between network and SINUMERIK 840D Machine is sold as in need of repair. There is a defect in the sensor for the tool changer (position detection). Celqv Hwerl Rwxobegt Please send technical questions in writing. >>> Commercial sale

Condition: excellent (used), Functionality: fully functional, travel distance X-axis: 633 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: ITNC530, rotational speed (min.): 18,000 rpm, Equipment: chip conveyor, documentation/manual, Cover Maho DMU 60 MonoBLOCK -Control: Heidenhain ITNC 530 -Travel X-, Y-, Z-axis: 633/560/560mm -feed speed 0.01-30000 mm/min -rapid traverse 30 m/min -Spindle speed: 20-18000 1/min -Tool holder: SK40 DIN 69871 -Tool magazine with 24 places -Machine weight approx. 9000 kg -Chip conveyor -Rinsing gun -Coolant blow air changeover (M25) -Heidenhain TS 649 touch probe -Manual control unit -BLUM laser -bed flushing The machine was checked and measured. A geometry report was created. The geometry is within the tolerance for new machines. Very good condition. An inspection / test, on site under power, is of course possible. We are happy to offer transportation, installation and commissioning on site. Everything from a single source: We at Baumgärtner CNC GmbH & Co. KG are a company that specializes in: Cgslqveuii Hne Hwbst -service -maintenance -overhaul -automation of DMG machines and other well-known manufacturers. We accompany you! From the purchase of the machine, to transportation and installation, to commissioning and subsequent maintenance or repair work, you can count on us.

Condition: good (used), Year of construction: 1996, Travel X/Y/Z 600/500/450 mm, Control HEIDENHAIN TNC 410 PA, spindle power 9,0 KW, spindle speed 5-6300 rpm, ISO40, table size 530x900 mm, max. table load 400 kg, tool changer 22 places, dimension 2200x2700x2050 mm, ca. 3550 kgs, accessoires Renishaw tool prove, 4th axis TRIAG with clampings, Software updated, flat screen, radio data transfer installed, tool holders, manuals Celqvoqaguge Hwbjgt

Condition: used, Year of construction: 1992, machine/vehicle number: 2821-1444, See pictures for condition. More detailed information about the machine will follow shortly. Cgeletgkd Rsqv Hwbjt

Condition: good (used), Year of construction: 2012, Traverses X Y Z: 600 x 500 x 540mm, Table 700 x 500mm, Spindle speed 40 – 10,000 rpm, Spindle taper iso 40, 24 station ATC, Heidenhain TNC530I Control, Coolant, Low Volt light Cgjlqv Hju E R A Sjwbet

Condition: excellent (used), Working travels 600 x 560 x 510 mm Table size 900 x 560 mm Spindle taper SK40 Spindle speeds 20 -12'000 rpm Tool changer 30 Pos. Control SIEMENS 840D Coolant through spindle Misc. accessories Colqsvhahrov Hwbegt MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2017, Functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, feed rate X-axis: 42,000 m/min, feed rate Y-axis: 42,000 m/min, feed rate Z-axis: 42,000 m/min, table load: 800 kg, rotational speed (max.): 20,000 rpm, spindle speed (max.): 20,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Machine is in top condition and can be inspected at any time Celqv Hovk Ulqowbjgt

Condition: used, Year of construction: 2005, - Fagor 8055 CNC control Cgjlqvjtvf Hto Hwbst - Additional tank for internal spindle cooling (15 bar) 400 liters - Year of construction 2005 Technical data: - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverse: 24 m/min - Working spindle speed: 8000 rpm - Tool holder: BT40 - Table size: 762 x 363 mm - Maximum table load: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

Condition: excellent (used), Year of construction: 2013, Control: Heidenhain iTNC 530 Traverse path X: 635 mm Travel Y: 510 mm Z travel: 460 mm Spindle speed: 10,000 rpm Spindle power: 13/9 KW Tool holder: SK 40 Pallet size: 800 x 500 mm Pallet load: 400 kg Tool changer: 30 places Rapid traverse: 30 m/min 3D measuring probe TS 649 Table probe Rinsing gun handwheel Cgelqv Hetk Nzbowbet Linear scales

Year of construction: 2007, Condition: good (used), OKK VP 400 5 AXIS VERTICAL MACHINING CENTRE MAKE OKK MODEL VP 400 YEAR 2007 CONTROL FANUC 310IS A5 TABLE SIZE DIA. 350.0 mm TABLE LOAD 200 KGS TRAVERSES (XYZAC) X: 600.0 mm Y: 410.0 mm Z: 460.0 mm A: -120 to +30 degrees C: 360 degrees SPINDLE SPEED 100 – 12,000 RPM SPINDLE TAPER 7/24 # 40 SPINDLE NOSE TO TABLE 150 – 610.0 mm SPINDLE MOTOR 22/18.5 kW RAPID TRAVERSE RATE: (X, Y, Z) 48/48/36 m/min ATC 30 stations SPINDLE TAPER BT 40 MAX. TOOL LENGTH 300.0 mm MAX. TOOL WEIGHT 7 KG TOOL CHANGE TIME 1.2 SEC PLUS BIG PLUS BT 40 SPINDLE Cjlqvji Hca To Hwbsgt 2 SPEED TOOL CHANGER CERAMIC SPINDLE BEARINGS SIMALTENOUS 5 AXIS THROUGH SPINDLE COOLANT RENISHAW MP10 PROBE RENISHAW MEASUREMENT TWIN AUGER CONVEYORS SPINDLE CHILLER

Year of construction: 2004, Condition: good (used), Traverses X Y Z; 680 x 394 x 625mm, Cjlqsm H Uyzjv Hwbogt B axis -110/+ 65 degrees, C axis 0.001 degrees, pallet diameter 130mm, maximum workpiece diameter 300mm, maximum workpiece height 250mm, number of pallets 40, spindle taper BT40, 240 Station ATC, spindle speed 12000rpm, Fanuc G-Tech 16I control, through spindle coolant, and swarf conveyor.

Condition: good (used), Year of construction: 2003, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Tool magazine is not in operation !!! Cgjlqor H D Akjv Hwbjt

Condition: used, Year of construction: 1989, x-travel 650 mm y-travel 410 mm z-travel 450 mm Colqv Hweucgupobsgt travel x vor 1000 mm control mc4va total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Year of construction: 2004, X-Axis 700 mm Y-Axis 360 mm Z-Axis 270 mm Table size length 600 mm width 300 mm Number of tool pockets 21 Celqv Houmrpzowbogt Spindle taper BT-30 Max. spindle speed 10000 rpm Length x width x height 1828.8 × 1574.8 × 2209.8 Weight 1800.4 kg

Condition: used, Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 510 mm, table load: 800 kg, rotational speed (max.): 8,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS x-path: 610 mm y-path: 500 mm z-path: 510 mm Table clamping surface: 1000 x 460 mm Spindle holder: BT 40 Spindle speeds - infinitely variable: 120 - 8000 rpm Spindle motor: 7.5 kW Torque at the spindle: 190 Nm Infinitely variable feeds: 1 - 8000 mm/min Rapid traverse X/Y/Z-axis: 24 / 24 / 18 m/min Table load: max. 800 kg Spindle projection: 510 mm Spindle/table distance min. / max.: 120 / 630 mm Tool changer: 24 Pos Tool diameter max.: 100 mm Tool length - max.: 300 mm Cjlqsuucq Esv Hwbsgt Tool weight max.: 10 kg MACHINE DETAILS Model: FIRST MCV 600 Year of construction: 2004 Control : Heidenhain iTNC 530 Machine length: 2.36 m Machine width: 2.45 m Machine height: 2.54 m Machine weight: approx. 4.3 t

Condition: excellent (used), Year of construction: 2000, Hello I have for sale a Deckel Maho DMU 60T machining center Control: Heidenhain 430 Technical condition of the machine - perfect Year of production: 2000 Country of Manufacture: Germany Machine parameters: Axis travel "X" : 630mm Celqvetyk Hme Hwbogt "Y" axis travel: 560mm Z" axis travel 560mm Torsion head Maximum spindle speed 18,000 rpm. Tool storage: 24pcs(2x12 tools) Heidenhain measuring scales on all axes Walking through spindle Chip conveyor High-pressure cooling system central lubrication hydraulic tool clamping spindle taper SK40 Full programming instructions Documentation Included in the price loading and transport by forwarding within the country The price also includes training in programming and operation of the machine We take care of all procedures related to obtaining leasing Stal-Com company for 17 years we are engaged in sales, service and training on CNC machines from DMG group. We specialize in all models of Gildemeister lathes and Deckel Maho Machining Centers. All machines undergo a meticulous technical inspection. In addition to customers from Poland, our machines are also bought by customers from all over Europe and parts of Asia. Each machine can be checked during production as we also do machining. After purchasing a machine from our company, we provide training for the crew as well as we can set up the production of details at the customer's site. We cooperate with many companies on a permanent basis to which we provide further machine tools.

Condition: good (used), Year of construction: 2004, operating hours: 18,584 h, Functionality: fully functional, TECHNICAL DETAILS Control: Heidenhain iTNC520 Travel X / Y / Z: 630 / 560 / 560 mm Speed range: 0 - 12000 rpm (infinitely variable) Operating mode: 3 + 4 + 5 axes Clamping surface Rigid angle table: 1000 mm x 600 mm Rotary table: available Number of magazine positions: 24 Tool holder: SK40 Cslqv Hwott I Tksbsgt MACHINE DETAILS Connected load: 49 kVA Operating voltage: 400 V, 50 Hz Switch-on time: 34,230 h Operating voltage: 18,584 h EQUIPMENT - Fully protected cabin with sliding doors and interior lighting - Integrated chip conveyor - Chip flushing gun - Coolant device - 3-part, height-adjustable machine shoes - Spindle oil cooler - Operating instructions - Electronic handwheel

Condition: ready for operation (used), Year of construction: 2010, operating hours: 43,000 h, Functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 14,000 rpm, number of slots in tool magazine: 60, New spindle installed in 2024! TECHNICAL DETAILS X travel: 635 mm Y travel: 510 mm Z travel: 460 mm Table dimensions: 560 x 790 mm Cgoleu Unv Esqv Hwbot Speed: 14,000 rpm Tool holder: SK40 Number of tool positions in the magazine: 60 MACHINE DETAILS Weight: 5,500 kg Connected load: 35 kVA Operating voltage: 400 V, 50 Hz Operating hours: approx. 71,000 h Spindle hours: approx. 43,000 h EQUIPMENT - Chip conveyor - ShopMill - Paper filter

Condition: ready for operation (used), Hilma hydraulic vice Machine vice Jaw width: 200mm Clamping width: 0-340mm Clamping force: approx. 80-100 kN ( could only be measured up to 60 kN. ) 3 clamping ranges adjustable via socket pins. Space requirement: 700mm x 300mm x 170mm ( L x W x H ) You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Cslqveu It Nto Hwbegt Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: excellent (used), Year of construction: 1999, operating hours: 15,000 h, Functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: Hurco, overall weight: 4,000 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 15,000 h, spindle motor power: 6,000 W, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hurco BMC2416 with Ultimax control. It's really extremely good and simple. Very easy to understand controls Machine is still under power and can be viewed at any time. We only milled small parts, mainly from aluminum. Cslqv Hwot R Th Tebsgt

Condition: excellent (used), Year of construction: 2019, operating hours: 6,083 h, Functionality: fully functional, controller model: Siemens 840D-SL, operating hours of spindle: 818 h, Equipment: chip conveyor, MILLING MACHINING CENTER CMX 600 V Cgjlqvju Dkc Nj Hwbet Available immediately Systems are dismantled ready for transport Self-collection at the Haldensleben site Optional loading/transport can be offered