Machining center with rotopallet

DMG MORI DMC 635 V - P

Condition: good (used), Year of construction: 2013, Vertical machining center Machine type: DMG DMC 635 V / P Control: Heidenhain iTNC 530 Year: 2013 Itedsz Dkt Dspfx Ahbon SPECIFICATIONS Travel X-Axis: 635 mm Y-Axis: 510 mm Z-Axis: 460 mm Spindle speeds: 10.000 rpm Tool: SK 40 Toolchanger Tool capacity: 30 Palett system Amount of paletts: 2 Table size: 560 x 790 mm Equipment No cooling through spindle Electronical handwheel Caliper: TS649 Tool measurement: Tischtaster Chip rinsing pistol

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 6,000 m/min, feed rate Z-axis: 6,000 m/min, table width: 450 mm, table length: 1,530 mm, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Itedpfx Ahextmqtobon Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2006, Technical details: max. wheel diameter: 300 mm max. module: 7 weight of the machine ca.: 15 t table turning speeds: 100 U/min table diameter: 180 mm hob turning speeds: 750 U/min max. hob diameter: 300 cutter length max.: 230 mm Liebherr LC300 with loading automation Machine including counter holder Iodpjyz Sd Rjfx Ahbetn The machine used to work with emulsion *

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 28820005482, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, Equipment: documentation/manual, Dear Sir or Madam, Itsdpfsvx N Shjx Ahben We are selling a DMC 100 V hi-dyn machining center in good condition. Unfortunately, the year of manufacture is not written down, but we suspect it was 2001. Please see the pictures for further details; we are of course happy to answer any questions you may have. The system can be viewed with power on. The buyer must organize collection with a suitable truck. The system can be dismantled and removed by either the buyer or us (for an additional fee of €1,500).

Condition: used, TECHNICAL DETAILS - Number of axes : 7 MILLING SPINDLE - Tool holder type : HSK40 - Spindle speeds : 30000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 450/270/310 [mm] - Rapid traverses rates (X/Y/Z) : 75 [m/min] Iodpfxeuhbr Ts Ahbstn B ROTARY AXIS - Travel : -20/+90 [°] - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 40 TURNING SPINDLE - Spindle speeds : 8000 [rpm] - Max. bar diameter : 32 [mm] - C axis indexing precision : 0.001 [°] - Travel : 360 [°] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1500X2600 [mm] - Machine height : 2300 [mm] - Machine weight : 2850 [kg] MACHINE HOURS EQUIPMENT - CNC : Siemens 840 D - 3 colors status lamp

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Itodpfx Ahex Hn D Rebjn Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: good (used), functionality: fully functional, Year of construction: 2000, sheet thickness steel (max.): 16 mm, back gauge: 1,000 mm, cutting length (max.): 3,150 mm, foot switch motorized arrester behind cutting angle adjustment Technische Daten / technical details: Schnittleistung / max. cutting capacity 16 mm max. Schnittlänge / max. cutting length 3150 mm Anschlag / limit stop 1000 mm Gewicht der Maschine / weight 16300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Isdpfxev Syyve Ahbjtn Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Working travels 860 x 560 x 600 mm Table size 1000 x 560 mm Itsdpfxozbrrtj Ahbjn Spindle taper SK40 Spindle speeds -10'000 rpm Tool changer 24 Pos. Control HEIDENHAIN iTNC-530 Coolant through spindle 3D measuring tracer Tool lenght measuring device Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2003, turning length: 1,505 mm, Turning-milling center GILDEMEISTER GMX 400 linear with Y-axis and milling spindle Year of manufacture: 2003 Control system: Sinumerik Powerline Technical data: Drive power main spindle ISM 90: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar diameter: 90 mm Number of magazine slots: 120 pcs. Tool holder for milling spindle: HSK 63 Drive power counter spindle ISM 90: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar diameter: 90 mm B-axis / milling spindle: Drive power: Speed: Torque: Tool holder: HSK 63 Y-axis: +/- 110 B-axis: +/- 120° Ijdpfx Aswzbq Tshbotn Lower turret: X-axis: Z-axis: Speed of driven tools: Number of turret slots: 12 pcs. Tool holder: VDI 40 Accessories: - Chip conveyor - High-pressure system with 20 bar - Preparation for 3D measuring probe - Tailstock function for counter spindle - Automatic sliding doors

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, travel distance X-axis: 3,030 mm, travel distance Y-axis: 1,520 mm, travel distance Z-axis: 310 mm, total length: 9,500 mm, total width: 4,500 mm, total height: 2,050 mm, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, VS-3015CE 6KW FIber Laser Sheet Cutting Machine Working area (mm) : 3000×1500 Itedpfxsv Ngras Ahbjn X axis travel distance (mm): 1520 Y axis travel distance (mm): 3030 Z axis travel distance (mm)： 310 X/Y axis positioning accuracy ： ≤0.03mm\m X/Y axis repeat positioning accuracy： ≤±0.02mm Max. synthetic positioning speed: 150m\min Max. acceleration: 2G Double-sided control panel, adaptive multi-angle placement, simple disassembly, and can fit into a standard 40HQ container. Industrial-grade special air conditioner, constant temperature and humidity for stable performance. Automatic grease and oil injection system, intelligent air pressure monitoring device, and anti-collision detection device provide intelligent protection.