CNC machining center

Microcut Challenger MCV-2418

Condition: used, Year of construction: 2007, travel distance X-axis: 610 mm, travel distance Y-axis: 455 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 24 m/min, controller manufacturer: Siemens, Equipment: rotational speed infinitely variable, Ref. 5.3-787 1 used vertical machining center Microcut Challenger MCV2418, year of manufacture 2008 CNC control Siemens 24-position tool changer chip tray Technical data: Hjdpfx Aewwi H Ijahjp X-axis travel: 610 mm Y-axis travel: 455 mm Z-axis travel: 520 mm Spindle taper: ISO40 Spindle speed: 8000 rpm Table clamping area: 762x363 mm Tool magazine positions: 24 Weight approx.: 3200 kg Technical data, accessories, and machine description are non-binding.

Condition: excellent (used), Year of construction: 2006, FAMUP MCP 45 CNC machining center TECHNICAL DATA axes Number of axes: 3 X-axis: 450 mm Y-axis: 300 mm Z-axis: 400 mm Feed rate Work feed X,Y,Z: 10`000 mm/min Rapid feed X,Y,Z: 30`000 mm/min Working pressure force X,Y: 2000 N Working pressure force Z: 3300 N Pallet Dimensions: 400 x 300 mm Number of grooves: 2 Groove width: 14 mm Groove spacing: 80 mm Max. Table load: 100 kg Changeover time: 9 sec. Spindle Spindle motor power: 5 kW Speed: 10`000 rpm Tool changer Magazine slots: 16 Max. Tool diameter: 63 mm Max. Tool length: 150 mm Max. Tool weight: 4 kg Tool change time: 1.7 sec Hjdpfxjq U Rm He Aahop Weight: Approx. 3000 kg No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: excellent (used), Year of construction: 2011, CNC Control: FANUC Series 31i-A5 X axis travel mm: 730 Y axis travel mm: 510 Z axis travel mm: 510 B axis (degrees): +160 / -180 C axis (degrees): 360 Number of pallets: 1 Table size mm: Ø500 Table load capacity kg: 300 Cutting feedrate mm/min (X, Y, Z): 50,000, 50,000, 40,000 Maximum rapid traverse m/min (X, Y, Z): 50, 50, 40 Spindle speed rpm: 12,000 Spindle power kW: 18.5 / 15 Taper type: BT-40 Torque Nm: - Tool changer type: Chain Tool magazine capacity: 61 Max. tool diameter mm: 90 Max. tool diameter with adjacent positions empty: 125 Hsdpfoydh Hlex Aahjp Max. tool length mm: 300 Max. tool weight kg: 8 Coolant tank capacity l: 750 Through-spindle coolant (bar): Yes EQUIPMENT Rotary table with digital readouts: Included Work light: Included Through-spindle coolant Electronic handwheel integrated in CNC panel Coolant oil skimmer Tool life management 3D tool compensation Cylindrical interpolation MORI-APM programming software MACHINE DIMENSIONS Length mm: 2,771 Width mm: 3,948 Height mm: 3,264 Weight kg: 12,400

Condition: ready for operation (used), Year of construction: 2015, operating hours: 12,244 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 275 mm, travel distance Z-axis: 700 mm, spindle motor power: 11,000 W, total height: 1,620 mm, overall weight: 4,200 kg, controller manufacturer: SIEMENS, controller model: 840D-SolutionLine, number of slots in tool magazine: 16, number of axes: 2, This 2-axis SPINNER TC 600-65MC horizontal turning machine was manufactured in 2017, featuring a Siemens 840D control system and a 16-position indexing turret. It includes a main spindle with a speed of up to 4,000 rpm and a power of 24 kW. The machine offers a swing diameter over bed of 425 mm and a maximum turning diameter of 310 mm. Consider the opportunity to buy this SPINNER TC 600-65MC horizontal turning machine. Contact us for more information about this machine. Additional equipment • Full splash guard cladding + coolant unit • Work area light + pneumatic equipment • Panoramic window for optimum visibility into the work area Machine Benefits Technical Machine Benefits • Center distance: approx. 600 mm • Max turning diameter: 310 mm • Torque: main spindle (fanuc, s6 40%) 178 nm, main spindle (siemens, s6 40%) 301 nm • Quill stroke: 120 mm • Adjustment travel: 475 mm • Speed of rotating tools: 6000 1/min Hjdpfx Asx D E Hnjahsp • Driven tool power: (fanuc, 30 min) 3. 7 kw, (siemens, 40%) 6. 0 kw Extra Information Media Pneumatics max. operating pressure: 10 bar Normal pressure: 6 bar Hydraulics max. operating pressure: 30 bar Control Unit Control system: Standard Siemens 840D, Option Fanuc 21i Operating voltage: 400 V Mains frequency: 50/60 Hz Control voltage: 24 V DC Interfaces: USB, Ethernet, SPINNER-UNIMAG bar feed (electric) Technical Specification Through-spindle Coolant No Counter Spindle No Driven Tools Yes Taper Size VDI 30

Condition: used, Year of construction: 2002, Machining dimensions (tool diameter 25mm): X=3015 mm Y=1483 mm Z=325 mm Max. travels: X=3268 mm Y=1483 mm Z=325 mm Max. programming speed: X/Y = 75 m/min / Z = 30m/min Tool holder HSK 63F Drilling unit 7964, 14 vertical drilling spindles with 32 mm grid (10 in x / 4 in y) Sawing unit 7946 3.6 kW, 90° pneumatically pivotable Milling unit 7933 9 kW Wood Her Vector axis (C-axis) Tool magazine (6 disk places) Hand control unit Laser device (positioning of the suction cups) PC control panel with 17" monitor Operating system Windows 2000 Software: TwinCAM32 - office version Vacuum pump 100 m³/h Dry running Selective safety mats (3-field division) Storage location: Nattheim Hodpfovvi Nbex Aahep

Year of construction: 1998, condition: good (used), Make: UNION Type: Ti 1800 Year: 1998 Specifications Metric US Standard Table Length 2000 mm Table Width 1800 mm Table load 16000 Movement V-axis 1250 mm Rotation B-Axis 360.000 ° Rotation speed B-Axis 1,35 Omw/min. Movement speed V-axis 4000 mm/min. Dimensions (Estimate) Length 3400 mm Width Hjdpfx Aaskwcdbehep 2000 mm Height 920 mm Weight 6500 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2012, HAAS ST-10Y cnc lathe with C-axis, Y-axis Year: 2012 Technical details: Chuck Size 165 mm Max Part Swing max 419 mm Max Cutting Diameter 279 mm Max Cutting Length (varies with workholding) 406 mm Hodoy S S I Rjpfx Aahop Bar Capacity 44 mm Travels X Axis 200 mm Y Axis ± 51 mm Z Axis 406 mm Feedrates Rapids on X,Y 12.0 m/min Rapids on Z 30.5 m/min Spindle Nose A2-5 Max Rating 15.0 hp 11.2 kW Max Speed 6000 rpm Max Torque 102.0 Nm on 1300 rpm Draw Tube Bore ø 46 mm Spindle Bore ø 58.7 mm Main Spindle C Axis Positioning (±) 0.02 ° 0.02 ° Brake Holding Torque 190 Nm Control Type Interpolated Motion and Positioning Tailstock Taper MT3 Hydraulic Quill Travel 95 mm Manual Body Positioning 508 mm Turret 12 positions Live Tooling Max Speed 4000 rpm Tooling BMT45 Coolant Capacity 114 L Weight 3600 kg Accessories/options: - complete with C-axis and Y-axis - driven tool holders, 2 axial and 2 radial - swarf conveyor - hydraulic chuck - collet type chuck - static tool holders, 10 pieces - parts catcher - tool measuring arm - foot pedals for chuck and tailstock operating Under power in our warehouse, possible to test it anytime!

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Hsdpolz Rvlefx Aahjp Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, machine/vehicle number: 1383A, mileage: 152 km, power: 127 kW (172.67 HP), first registration: 07/1993, fuel type: diesel, overall weight: 9,716 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Equipment: all wheel drive, compressor, trailer coupling, TUV is NEW!!! truck registration , The AM General in a really good condition directly from the Army , Well maintained and maintained, the body is in a super good condition (vehicle from the reserve) , The M109A4 is equipped with: Tire pressure regulation system, with which the tire pressure can be changed while driving (ideal for soft terrain, sand, mud.....), four-wheel drive, 6 cylinder Caterpillar diesel engine with turbo and 6598cm? displacement (Pump-Duse without electronics), 5-speed automatic transmission, transfer case with stowage and off-road gear, power steering, air-assisted brakes, 3 front seats, cab has a soft-top and can be driven open, the body has the dimensions L/W/He L/W/H 3660 / 2290 / 1950mm inside, airing, electrical installation with sockets, interior lighting, trunk door at the rear, 3 windows on each side, the km indication are miles, there are several M109 in stock with a speedometer reading of 79 miles to 2155 miles, year of construction 1989 to 1993, driving license class 2 (truck) Perhaps with a little slimming down to 7.49T, tire size 14.5R20 (very good).e 14.5R20(very good condition) Tubeless , Highest speed 90 km / h , 24Volt power supply , The M109A4 has not only Tuv, but also drives reliably :-) can also be insured cheaply as a young timer AM Generalist also already for conversion as a motorhome and long-distance traveler, . All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal Hsdpfjqx Sxdjx Aahep

Year of construction: 1990, condition: used, 2. Tool turret heads, manufacturer DUPLOMATIC, year of manufacture approx. 1990, type: BSV-N250 8/20-110/50. Hsdobaf Spjpfx Aahep Tool holder size VDI50. Tool stations: 8. Center height: 125 mm. Price per piece.