Condition: good (used), BIESSE ARROW ATS 5 AXIS NC1000 MACHINING CENTER Machining head with revolver tool change Dujb Hcplsukcy Eoajt BH39 drilling machine, 250m3 vacuum pump (this machine had been in operation for 10 years in a woodworking school)

Condition: good (used), Year of construction: 2014, An IMA feeding system is for sale. Dob Hjqwn E Hscplajut Machine is available immediately. Year 2014

Condition: used, Year of construction: 2012, Integrated NC machining center for windows and doors composed of: A) Automatic loader mod. "SP" Automatic loader for Base SP N. 1 moulder -Automatic loader consisting of: -Table with motorized belts -Automatic device for moving pieces from the buffer to the loading surface of the moulder * Piece length min: 450 mm max: 3200 mm * Piece width min: 40 mm max: 230 mm * Piece thickness min: 40 mm max: 120 mm * Work cycles 10/min * Chain advancement speed on the table: 7 m/min * Loading table dimensions 2800 x 2150 mm B) Automatic moulder mod. SUPERSET NT C 6 Position 1 = Planer Shaft Position 2= 1st right vertical shaft Position 3= 1st left vertical shaft Position 4= 1st upper horizontal shaft Position 5= 1st lower horizontal shaft Position 6= Group for slat recovery 2500 mm entry level Speed 6-36 m/min via inverter No. 1 - engine power 5.5 hp (4 kw) Horizontal presser before the planer with pneumatic exclusion from the panel Pneumatic exclusion from the control panel for the feed unit located before the planer shaft Tandem advance group in front of the right vertical with rapid exclusion Advance groups after the upper ones for reducing the towing distance from 620 mm to 450 mm Input guide with bearings for automatic feeders Electrical predisposition for the use of automatic loaders Manual centralized lubrication Pump for lubrication of the work surface with automatic drive Setup for in-line integration with INTEGRA SYSTEM - work surface raised to 970 mm - traffic light at entrance - piece counting Independent electrical panel POS. 1 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) T-SET quick tool locking -allows tool locking/unlocking with the simple use of a compressed air gun POS. 2 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic vertical positioning POS. 3 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) High precision shaft Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic horizontal positioning POS. 4 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking Electronic vertical positioning POS. 5 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm Deb Hcpsixxwmelasut T-SET quick tool locking POS. 6 Glass bead recovery group Comprehends: PRL allows the automatic transition from planing to function recovery of the glazing bead and vice versa. - operating group with shaft diameter 30 mm, length 30 mm - electronic horizontal positioning - electronic vertical positioning - hardware and PLC modifications for axis management - tandem exit and modified hood second advancing group after the universal C) Connection transfer Transfer for receiving pieces from the moulder and automatic insertion into the Sott

Condition: ready for operation (used), Year of construction: 2006, operating hours: 19,857 h, Functionality: fully functional, travel distance X-axis: 4,400 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 180 mm, number of slots in tool magazine: 72, TECHNICAL DETAILS Travel: 4,400 x 1,300 x 180 mm Deb Hcpjuf Tpfslaeut Milling unit power: 15 HP Tool change: automatic Number of tool positions: 3 x 24 slots EQUIPMENT - Work table with traverse - Auxiliary unit for heavy parts - Pneumatic clamps for door and window production - Vacuum pump 250 m3/h - Automatic lubrication - Conveyor for waste

Condition: good (used), Year of construction: 2007, Functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 180 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 4,500 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 180 mm, feed rate X-axis: 45 m/min, feed rate Y-axis: 45 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: esa, workpiece length (max.): 4,500 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 180 mm, total height: 2,750 mm, total length: 7,000 mm, total width: 3,000 mm, table width: 1,200 mm, table height: 950 mm, table length: 4,500 mm, rotational speed (min.): 24,000 rpm, rotational speed (max.): 24,000 rpm, overall weight: 5,000 kg, spindle speed (min.): 24,000 rpm, spindle speed (max.): 24,000 rpm, spindle motor power: 7,500 W, number of spindles: 2, number of slots in tool magazine: 10, tool mount: 200 mm, tool length: 200 mm, tool diameter: 150 mm, tool weight: 5,000 g, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, Nesting cnc machine with automatic emptying of the work table. 7.5 kw main milling unit with quick tool change 10 positions 6.6 kw auxiliary milling unit with manual tool change HSK63F Saw with automatic 0-90 degree rotation Automatic lubrication Dujb Hcploufgg Reajt Remote machine control 2x vacuum pump 250m3h each

Condition: good (used), OMLAT Homag main spindle 12 KW 2-056-09-9670 Motor spindle with C-axis and RENISHAW measuring probe Please contact us if you only need the spindle and not the additional units. We also have a spindle in stock that can be offered without C-axis and measuring probe. Technical specifications: Duob Heudmbrocplaet Tool holder: HSK F63, taper diameter 38 mm, similar to DIN 69893 Tool retraction: Automatic with a retraction force of 11,000 N Maximum tool weight: 6 kg Direction of rotation: Right/left rotation, programmable Speed range: Infinitely variable 1,500 - 18,000 rpm, programmable Drive: Frequency-controlled three-phase motor Drive power: 12 kW in S-1 mode Spindle lubrication: One-time factory grease lubrication Spindle cooling: Water cooling Constant power: From 12,000 to 18,000 rpm Serial number: 006186 Homag part number: 2-05609-9670 Renishaw MP 11 probe The Renishaw MP 11 touch probe is an indispensable addition to your CNC machine. It enables high-precision measurements and ensures that your machining processes always run accurately and reliably. NC-controlled C-axis (W-axis) The NC-controlled C-axis (W-axis) considerably expands your machining options. This axis enables a 360° rotating movement and is perfectly adapted for use in Homag/Weeke machines.

Condition: reconditioned (used), Year of construction: 1998, Functionality: fully functional, MACHINERY READY DELIVERABLED, FREE SALE WITHOUT CONFIDENTIAL DEBUILDING OF THE WORKING CENTRE DOT-IN-POT with 3 axes3 Yaskawa electronic drivesNumerical control NC 400 PlusHole area 1,600 x 845 MMPfor larger panels, machining is carried out in 2 phases with double positioning, first to the left and then to the right, continuing the drilling precision10 Independent vertical drills with 32 mm.4 pitch. Horizontal drills ( 2 dx 2 sx )2 Horizontal drills ( 1 ant 1 post )1 blade unit for channels in XP dry vacuum pump axis New safety equipmentRevised machinery similar to the new one Djb Hcpsd Tq Iwelaeut

Condition: used, Year of construction: 1991, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 40 mm, overall weight: 4,000 kg, Taper: PS25 CNC control Tria 6000 Motor power 5.5 kW Dusbeua Arfo Hcplast There are 4 pieces available

Condition: used, Year of construction: 2012, XP600 Numerical Control with Biesse Works Advanced Software - Biesse Cabinet - Biesse Folding - Biesse Nest - Biesse Bh 660 Working field in X axis 3875 mm Working field in Y axis 1875 mm Working stroke in Z axis 385 mm Full nesting worktable Blower for cleaning the work surface Automatic loading system with side lifting table Labeling Automatic printing and application system of adhesive labels N ° 1 3-axis vertical electrospindle, with automatic tool change, liquid cooling, Iso 30 type cones Blade group Automatic tool change system with 21 positions - positioned on the rear of the machine Drilling head with 35 spindles arranged as follows: - N ° 17 vertical in X axis - N ° 12 vertical in Y axis - N ° 4 horizontal in X axis - N ° 2 horizontal in Y axis Duob Hcjpp Tiljplast Automatic unloading system with motorized belt Front protection and safety system with carpets Automatic lubrication system Air conditioning system for cooling and cleaning the machine control N ° 2 vacuum pumps

Condition: ready for operation (used), Year of construction: 2006, operating hours: 19,857 h, Functionality: fully functional, travel distance X-axis: 4,400 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 180 mm, number of slots in tool magazine: 72, TECHNICAL DETAILS Travel: 4,400 x 1,300 x 180 mm Milling unit power: 15 HP Djb Hcpljt Ubnpeajut Tool change: automatic Number of tool positions: 3 x 24 slots EQUIPMENT - Work table with traverse - Auxiliary unit for heavy parts - Pneumatic clamps for door and window production - Vacuum pump 250 m3/h - Automatic lubrication - Conveyor for waste

Condition: good (used), Year of construction: 1999, Functionality: fully functional, IMA BIMA 410 V CNC WORKING CENTRE FOR ROUTING + BORING + EDGE BANDING • Industrial machine with heavy-duty structure Djb Hcplet N Iw Tsaeut • Working area: X:4000 mm Y:1200 mm Z: 100 mm • Travel speed: X:100 m/min Y:80 m/min Z: 25 m/min • 2 Working areas • 8 movable work tables to support the panels. SCHMALZ system • 23 SCHMALZ suction cups with vacuum system for the locking of the working piece • 4 loading device through pneumatic bars assembled on the work tables that lift the pieces • 1 SIEMENS vacuum pump ROUTING UNIT: • 10 HP. Refrigerated router head • Automatic change of the tool • Tool holders: HSK F-63 • C AXIS that allows to turn and 360° angle drive heads with rotation regulation in automatic by numerical control • 0 to 20.000 rpm • Tool magazine 12 positions MULTI-BORING UNIT: • 7 independent spindles for vertical boring in X direction • 5 independent spindles for vertical boring in Y direction • High revolution speed: 9.000 rpm EDGE BANDING UNIT: • Automatic device to apply the edge into straight profiles of shaped panels • Applicable banding material in coils: thin edge and PVC up to 3 mm • Independent unit to edge band shaped panels. It's installed on the main frame of the machine - hot-melt glue pot and premelter - spreading roller to regulate the quantity of apllied glue - edge pression roller • Lamp zone to pre-heat the side of the panel • Multiple magazine for edge coils with 2 positions, to automatically change the edge type • Top and bottom edge trimming head-unit • Top and bottom edge scraping head-unit CONTROL OF THE MACHINE: • IMATRONIC • Software IMAWOP • Command board installed on a separated electrical cabinet to control the machine PROTECTION ENCLOSURE OF THE WORKING UNITS PROTECTION FENCES SECURITY CARPETS SECURITY NORME CE MARK

Condition: reconditioned (used), Functionality: fully functional, IMA Adapter Unit with Interchangeable Flush Trimming Head and Flat Scraper Blade The IMA adapter unit is a refurbished interchangeable unit designed for flush trimming operations and equipped with a flat scraper blade. Featuring the article number 10 237 069 and an HSK 63 F clamping system, this unit is ideal for precise and secure machining tasks. The unit’s rotation is synchronized with the drive rotation, and it includes a 57 mm opening. Specifically designed for use with IMA machines, it supports tools with chamfer milling cutters. Included in the package is a flat scraper blade. The bolt dimensions are 16/18.1 mm. The unit can reach a maximum speed of 9000 revolutions per minute and has a maximum probing depth of 1.5 mm. Following a comprehensive refurbishment, which includes inspection, replacement of bearings, and new pneumatic hoses, the unit offers maximum safety, precision, and a nearly new condition. Used adapter units are taken from operational systems and are fully functional. Any age-related wear or significant precision limitations are clearly noted. Technical Description • Product: IMA Adapter Unit with Interchangeable Flush Trimming Head and Flat Scraper Blade • Article Number: 10 237 069 • Clamping System: HSK 63 F • Condition: Refurbished • Rotation: Synchronized with drive rotation • Opening: 57 mm Djb Hcoudl Idjplajut • Support Bolt: For IMA machines • Tools: Compatible with chamfer milling cutters • Flat Scraper Blade: Included • Bolt Dimensions: 16/18.1 mm • Maximum Speed: 9000 RPM • Maximum Probing Depth: 1.5 mm • Special Features: • Inspected and fully re-bearings for maximum safety and precision • Pneumatic hoses replaced • Nearly new condition Note: Used adapter units are fully functional, extracted from operational systems. Explicit notice is provided for excessive wear or significant precision reductions due to aging.

Year of construction: 1999, Condition: repair required (used), machine/vehicle number: AL 1 / 99, Connection 9,0 kW 400 V Compressed air connection 6 bar suction 1x160 mm 3400 m³/h 30 m/sec Compressed air consumption 200 NL/min drilling spindles 9 pcs / 3000 rpm grooving spindle 1 pc / 6000 rpm milling spindle 1 pc / 16000 rpm LxWxH 4050 x 2050 x 1900 mm weight approx. 1500 kg max. plate thickness 55 mm Deb Hceiiy E Toplasut

Condition: like new (used), Year of construction: 2012, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 70 m/min, rapid traverse Z-axis: 30 m/min, spindle speed (min.): 20,000 rpm, number of slots in tool magazine: 9, power: 7.5 kW (10.20 HP), Equipment: documentation/manual, DEF 1000 SPEEDO machining center Fully overhauled in our workshop. One-year warranty on mechanical parts. Training included. Machining length in X: 5000 mm , Y:1000 mm , Z:400 mm (without drill bit) 4th axis and 2D positioning laser included. The solution for solid wood machining! Includes : - 4th axis - 2-D laser - 9-position automatic tool changer - 10 suction cups Ø180mm h 70 mm - 10 suction cups Ø120mm h 70 mm - 2 pneumatic post clamps with 160 mm opening Excl: - Tools - Power cable 3 x 6² + N + earth - Mains cable between office and machine (not compulsory) - Suction hose - 160mm - Compressed air - 6-7 bars - Unloading and installation by local forklift truck Options : Dobsrxuize Hcplaout - 3 vertical clamps for machining frames or handrails - Software - Basic tooling pack - Transportation

Condition: used, XP600 Numerical Control with BIESSE WORKS Software Working dimensions in X axis 3865 mm Working dimensions in Y axis 1975 mm Working dimensions in Z axis 350 mm Nesting worktable Barcode lable printing Automatic unloading system by table with motorized belt N ° 1 vertical electrospindle, with automatic tool change, liquid cooling system Automatic tool changer system with 21 positions with chain on the rear of the machine Boring head with 19 vertical and horizontal spindles arranged as follows: - N ° 6 vertical in X axis - N ° 7 vertical in Y axis - N ° 4 horizontal in X axis - N ° 2 horizontal in Y axis N ° 1 integrated 120 mm blade in X axis for the execution of grooves Front protection and safety system with carpets Djb Hcpspwvtcelasut Automatic lubrication system Air conditioning system for cooling and cleaning the machine control Vacuum pump Machine weight 5100 kg Installed power KW 32.7

Condition: good (used), Drilling gearbox HOMAG BAZ BOF 6 + 11 with spindle Item number 1-056-08-3281 HOMAG drilling gearbox 6 spindles in Y direction 11 spindles in X direction Right - left run. Unit no. 4 -00579 Drawing no.: 009M000U7287 Dsbsudlwxo Hcplaeut Gear ratio 1-1.16 Drive speed 50 HZ 3000 min1 Speed of spindle 4781 min 1 Part no.: 1-56-08-3281 used version We always have numerous gearboxes and spindles in stock. Just take a look in our web store.

Condition: used, Year of construction: 2012, Numerical Control XILOG PLUS Working field in X axis 3050 mm Working field in Y axis 1050 mm Working stroke in Z axis 120 mm N ° 2 work fields Worktop with bars Djb Hcsl Ikv Rjplasut N ° 6 adjustable bars for the suction cups support N ° 2 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing N ° 1 vertical electrospindle, with automatic tool change, HSK connection Automatic tool change system with 10 positions positioned on the rear of the machine Drilling head with spindles arranged as follows: - N ° 6 vertical in X axis - N ° 4 vertical in Y axis - N ° 2 horizontal in X axis - N ° 2 horizontal in Y axis - N ° 1 blade group integrated in the X axis Bumper protection and safety system Automatic lubrication system Air conditioning system for cooling and cleaning the machine control 110 m3 / h vacuum pump

Condition: good (used), IMA BENZ drilling unit 10 +11 spindles with additional milling cutter and horizontal drilling head 2 x 3 spindles for IMA 310 410 610 If you are looking for a different drilling gear from Homag or IMA, please contact us or have a look at the website in our store. IMA BENZ drilling unit is a versatile and powerful tool, especially for the IMA 310, 410 and 610 machines. It is a 10 + 11 spindle drilling unit with an additional milling cutter and a horizontal drilling head with 2 x 4 spindles. Here are some technical details: Unit no.: 4-08300 and 4-07753 Drawing no.: 000W00004824 and 000M11100819 Motor speed: 1max = 4800 min-¹ Spindle speed: 8100 min-¹ and 8400 min-¹ Drive power: 4 kW Gear ratio: i = 1:1.69 and 1:1.75 Milling spindle: For holding milling tools Dsb Hcoudludeplajut The unit is used but in a functional condition and offers high productivity thanks to the ability to drill several holes simultaneously, which significantly reduces machining time.

Condition: used, Year of construction: 2017, Numerical Control with B-Solid Software - 3D CAD-CAM program to design, simulate, and manage processes of machining of Biesse machining centers and drilling machines BNest Software - Software module dedicated to processing in Nesting mode that allows you to create projects containing the list of articles with the quantities to be produced and the list of plates to be used with the aim of minimize the material used and processing times Debjt Ul Dnj Hcplaout Working field in X axis mm 4300 Working range in Y axis mm 2200 N ° 2 work fields Nesting work plan Automatic loading system with side lift table Panel detachment system with 2 suction cups N° 1 vertical 3-axis electrospindle, Kw 13.2, with automatic tool change, Hsk cone type Automatic tool change system with 16 positions - positioned on the rear of the machine BH 10 boring head with 10 spindles arranged as follows: - N ° 5 vertical in X axis - N° 5 verticals in Y axis Automatic unloading system with motorized belt Worktop cleaning system Printing and application system of adhesive labels with labeling machine, 22" monitor, keyboard and mouse with dedicated PC Protection and safety system with perimeter grids Safety system with bumper Automatic lubrication system Air conditioning system for cooling and cleaning the machine control N° 2 vacuum pumps 250 m3/h Installed power Kw 31

Condition: used, Year of construction: 2012, Numerical control Power Control with WoodWop Software Working range X 3000 Working range Y 850 Working range Z 60 N° 1 vertical electrospindle 3 axes N° 1 blade integrated in the drilling head N° 5 independent spindles for vertical drilling in the "X" direction Dujb Hcpsikrv Nolaot N° 3 independent spindles for vertical drilling in the "Y" direction N° 4 spindles for horizontal drilling in the "X" direction N° 2 spindles for horizontal drilling in the "Y" direction

Condition: used, Year of construction: 2016, Numerical Control with Biesse Works Software Barcode reader device Working field in X axis mm 3200 Working range in Y axis mm 900 Working field in Z axis mm 80 Loading device automatically through n. 2 panel support clamps Automatic unloading device with panel return to the operator via motorized roller conveyors Dusb Hcplel Ikxljajt N° 2 vertical 3-axis electrospindle, ISO 30 tapers Automatic tool change at n. 5 positions Boring head with 21 spindles arranged as follows: - N° 7 verticals in X axis - N° 6 vertical in Y axis - N° 6 horizontal in X axis - N° 2 horizontal in Y axis Integrated blade for making grooves Independent unit for automatic plug insertion Front carpet protection and safety system Perimeter protection grilles

Condition: used, Power Control Numerical Control with WoodWop 4.5 Software Working stroke in X axis 3955 mm Working stroke in Y axis 1655 mm Working stroke in Z axis 260 mm No. 2 work camp Bar worktop N° 9 manually adjustable bars for suction cup support Manually adjustable suction cups for each bar with vacuum seal for fixing the panel during processing - Schmaltz N° 1 4-axis vertical electrospindle, with automatic tool change, Hsk type cones N° 1 3-axis vertical electrospindle, Hsk type cones Automatic tool change system with 8 positions - positioned on the back of the machine Drilling head with 26 spindles arranged as follows: - N° 9 verticals on the X axis Dusb Hcpljr Ifu Ujaet - N° 11 verticals on the Y axis - N° 4 horizontal on the X axis - N° 2 horizontal in Y axis Integrated blade for making grooves Front carpet protection and safety system Perimeter protection grills Vacuum pump Liquid cooling system

Condition: used, The COVERTEK machining center is suitable for processing solid and glued wood beams. They are used for the construction of frames and roof structures. * Portal with mobile positioning trolleys; Duobetz H Ego Hcplajt * Machining of 6 sides without rotation of the piece; * Dual 5-axis working unit with 12-position HSK-E63 tool holder; * N° 2 spindles of 17 kW each; * Data imported from CAD/CAM programs Technical specifications * Workpiece width: min. 100 mm - max. 600mm; * Workpiece thickness: min. 70 mm - max. 300mm; * Workpiece length: max. 13000mm; * Blade diameter: 640 mm; * Feed speed: max. 80 m/min.; * Software type: TPA ALBATROS EDICAD; * Automatic centralized lubrication; * Liquid cooling of the spindle; * Certification CE; * Total connection: 70 kW TECHNICAL DETAILS TO BE CHECKED UPON ARRIVAL OF THE MACHINE IN THE WAREHOUSE

Condition: used, Xp 600 Numerical Control with Biesse Works Software Working range in X axis 3000 mm Working field in Y axis 1000 mm Working field in Z axis 60 mm Automatic loading system with motorized belt transfer N° 2 Pliers for blocking and transporting the panel N° 1+1 vertical electrospindle 3 axes (lower + upper) N° 1+1 independent blade (lower + upper) Djbopp Thno Hcplaout N° 29 + 29 independent spindles for vertical drilling in "X and Y" direction (upper + lower) N° 10 + 10 independent spindles for horizontal drilling in "X and Y" direction (upper + lower) Automatic unloading system with motorized belt transfer

Condition: used, Year of construction: 2017, Numerical Control with B-Solid Software Working range in X axis 3600 mm Working range in Y axis 1800 mm Dsb Heqvt D Rscplasut N ° 2 work fields Nesting worktable Automatic loading system with side lifting table Label printing system with automatic application on the loading table Panel detachment system with suction cups N° 1 3-axis vertical electrospindle, 13.2 kW, with automatic tool change, ISO 30 cone type Automatic tool change system with 16 positions - positioned on the back of the machine Automatic tool change system with 8 positions - on the machine BH 10 drilling head with 10 spindles arranged as follows: - N° 15 verticals on the X axis - N° 17 verticals on the Y axis Automatic unloading system with motorized belt Worktop cleaning system Protection and safety system with perimeter grilles Security system with Bumper Automatic lubrication system Air conditioning system for cooling and cleaning the machine control 250 m3/h vacuum pumps