Used Biesse Rover 18 for sale (331)

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Working area: X-axis: 2310 mm, Y-axis: 628 mm, Z-axis: 90 mm Max. programmable speed: X-axis: 100 m/min; Y-axis: 75 m/min; Z-axis: 15 m/min Drill holder: diameter 10 mm Spindle speed: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 4 horizontal spindles on the X-axis, 12 vertical spindles in the X-line Operating air pressure: 6 bar Maximum compressed air consumption: 0.75 NL/cycle Installed power: max. 7.5 kW Vacuum tool capacity: 40 m³/h CNC: Display: monochrome 9" Dodpfx Alsydf Nde Asku Floppy disk drive PLC for machine cycle control Availability: short-term Stock location: Röllbach

Condition: good (used), Year of construction: 1998, I sell the 3-axis CNC working centre Biesse Rover 13S with beam table, year 1998. Configuration: Dedpfx Asz Ii Axsl Asku 3-axis main spindle HSD 1 grooving saw X-direction Drilling head 10+4+2 spindles Useful working area 1540x1050mm. 1 working field, 2 clamping areas Total power 10kW Pump Becker Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately.

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 1000012445, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,800 mm, overall weight: 4,000 kg, TECHNICAL DETAILS Working area X-axis: 3,600 mm Working area Y-axis: 1,800 mm Number of working zones: 2 Dedpfxeydk Aij Al Aoku Tool change positions on the rear: 16 Tool change positions on the machine: 8 Vacuum pump: 250 m³/h Drilling head BH 10 configuration: 15 vertical spindles on the X-axis 17 vertical spindles on the Y-axis MACHINE DETAILS Electrospindle power: 13.2 kW Electrospindle type: ISO 30 Control: CNC with B-Solid software Weight: 4,000 kg EQUIPMENT Nesting work table Automatic loading system with side lift table Label printing system with automatic application on the loading table Panel separation system with suction cups Automatic unloading system with motorized conveyor belt Worktable cleaning system Protection and safety system with perimeter fencing Safety system with bumper Automatic lubrication system Air-conditioning system for cooling and cleaning the machine control unit

Condition: used, Year of construction: 2017, The BIESSE ROVER A 1643 EDGE is a comprehensively equipped CNC machining center with a 5-axis machining head and an integrated edge banding unit. Working area, X-axis: 4,320 mm Swing machining in X: 1,620 mm Working area, Y-axis: approx. 1,580-1,660 mm Travel, Z-axis: 180 mm Edge banding Working area, X-axis: 3,300 mm Working area, Y-axis: 1,540 mm Maximum loading width in Y: 1,900 mm, expandable to up to 2,100 mm 5-axis unit 5-axis machining head C-axis: continuous 360° rotation B-axis: continuous 360° rotation B-axis speed: 18 rpm C-axis speed: 18 rpm Maximum spindle speed: 24,000 rpm Power 11 kW in S1 operation 13 kW in S6 operation Additional features Maximum undercut angle: -10° Collision monitoring for the 5-axis unit Prepared for the use of attachments on the 5-axis unit Work table and clamping system ATS work table 8 support rails 32 adjustable consoles 32 pneumatic vacuum cups Vacuum cups adjustable in 15 steps Pneumatic system divided into 2 working zones along the X-axis Vacuum system Vacuum pump capacity: 250 m³/h Additional equipment 6 lifting bars for easier loading and unloading 28 sensors for detecting lowered stops Stops and positioning 8 rear stops 8 center stops 4 side stops (2 left + 2 right) 2 additional side stops 4 removable center stops (2 left + 2 right) 2 additional center stops Pneumatic positioning and lowering of the stops Drilling unit BH 24L drilling head 13 independent vertical spindles 5 independent horizontal spindles Grooving saw, 120 mm Maximum groove depth: 25 mm Programmable spindle speed up to 6,000 rpm Tool changer 16-position rotary magazine Mounted on the X-axis carriage For tools and attachments Capacities Maximum tool/attachment weight: 7.5 kg Maximum total load of the magazine: 55 kg Edge banding unit GU60A edge banding unit For workpieces up to 60 mm thick Dedpfezuwyzsx Al Asku Edge banding speed up to 20 m/min Double pressure roller system Glue pot with hot melt system Edge heating lamp, 600 W CNC-controlled edge feeding system Automatic edge trimming Sensor for closed geometric shapes Accessories for edge machining Edge magazine 2-roller edge magazine mounted on the X-axis carriage Maximum roller diameter: 800 mm Maximum edge height: 65 mm Additional units Rounding tool 85 mm, HSK F63 Saw unit HSK F63 for cuts and grooves Maximum saw blade diameter: 215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with a 215 mm saw blade: 68 mm Post-processing Combined glue joint and edge trimming blade units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment Import of DXF, CIX and BPP files 3D machine simulation Tool management Management of 5-axis machining through positioning Assistant-supported program creation

Condition: used, Year of construction: 2010, Working range X = 4,600 mm Y = 1,535 mm Z = 275 mm Dkedpjzlz Svjfx Al Asu Designed for heavy-duty applications, making it ideal for machining large solid wood components and structural timber. The 5-axis controlled machining head enables the production of complex three-dimensional workpieces. • Central lubrication system • Desktop PC o Intel Celeron D CPU 2.66 GHz or higher o 512 MB RAM o 40 GB hard drive o 15" LCD monitor o Keyboard o Mouse o CD-ROM drive o Parallel port o RS-232 serial port o USB port o Ethernet card for connection to the office network • Remote service o Direct modem access for remote diagnostics and service • Electrical control cabinet • Air conditioning for the electrical cabinet • Safety system o Two pressure-sensitive safety mats on the front side of the machine with integrated control unit, ensuring safe alternating operation. • Signal lights for alternating (pendulum) machine operation • Job recovery function o Allows machining to resume after an emergency stop. • CE safety protection systems Worktable and accessories • Multizone table for 10 beams and 40 vacuum pods o Allows multiple workpieces to be loaded simultaneously, reducing tool changes and increasing productivity. o Vacuum clamping system o Pneumatic clamping system • 10 ATS beams, each equipped with 4 vacuum pods, L = 1,525 mm • EPS electronically positioned table for 10 beams • Rear stop row for 10 beams with 115 mm travel • Additional stop row at 375 mm with 140 mm travel • Additional stop row at 770 mm with 140 mm travel • Front stop row at 1,175 mm with 140 mm travel • 4 side stops with 140 mm travel (2 left + 2 right) complete with mounting hardware • 2 additional side stops with 140 mm travel (1 left + 1 right) complete with mounting hardware • Position sensors for all stops • 4 lifting devices for easier loading and unloading of workpieces for H = 74 mm modules • Vacuum unit 132 × 146 × H74 mm • Vacuum unit 132 × 75 × H74 mm • Vacuum unit 132 × 54 × H74 mm • UNICLAMP workpiece clamping system • Window manufacturing kit H = 74 mm, 40–98 mm • 6 UNICLAMP double-acting quick-connect clamps • 2 UNICLAMP modules for short workpieces • Chip and waste conveyor • Vacuum generator for 250 m³/h vacuum pump o 250 m³/h vacuum pump • Spindle and machining equipment • Motor power: o 12 kW at 12,000 rpm (S1 duty) o 15 kW at 12,000 rpm (S6 duty) • Maximum spindle speed: 22,000 rpm • Tool interface: HSK F63 • C-axis: continuous 360° • B-axis: ±100° • Coolant unit with 1,600 W cooling capacity • 15-position tool magazine for the 5-axis head • Additional Z carriage for rear units • 8.6 kW PEAK POWER electrospindle with HSK F63 interface and air cooling, specially designed for applications requiring high torque at low spindle speeds • Gear-driven C-axis rotating unit (360°) • BH9 drilling unit o 9 independently controlled drill spindles o Includes: o 5 vertical drills with 32 mm spacing o 2 independent dual-output horizontal drills o Separate 3 kW drive motor • 22-position tool magazine with 180 mm centre distance • Automatic lubrication system Two Leitz tool sets are available for EUR 19,000 + VAT: • LEITZ IV 68 tool set • LEITZ IV 90 tool set This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 6 h, travel distance X-axis: 2,465 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 378 mm, number of axes: 5, This 5-axis BIESSE ROVER PLAST A FT 1224 was manufactured in 2023. It features a working area of 2465 mm x 1260 mm and a Z-axis stroke of 378 mm. The machine is equipped with a powerful 13 kW machining unit capable of up to 20,000 RPM. If you are looking to get high-quality CNC wood machining capabilities, consider the BIESSE ROVER PLAST A FT 1224 machine we have for sale. Contact us for further details. Dodpfjz H Rk Uox Al Aeku • Working Area / Table Dimensions: X = 2465 mm, Y = 1260 mm• Z-Axis Stroke: 378 mm• Maximum Axis Speed: X = 85 m/min, Y = 60 m/min, Z = 20 m/min• Maximum Piece Passage in Z: 200 mm (170 mm with Sweeper Arm)• Worktable Type: FT PLUS phenolic layer table with 30 mm grid layout, 12 mm MDF matrix plate• Vacuum System: Multi-zone vacuum system (4 independent zones)• Vacuum Pump: 1x 250 m³/h cam vacuum pump (dry running, maintenance free)• Machining Unit: 5-interpolating axes machining unit, 13 kW (17.4 HP) S6 / 11 kW S1, HSK F63 adapter, liquid-cooled, up to 20,000 RPM• Axis Angles: C-axis 360° continuous rotation, B-axis +/- 150°• Coolant Unit: Liquid cooling system (absorbs 1600 W) for electrospindle• Tool Tool Changer / Magazines:• 13/16-position linear side tool changer mounted on machine bed• 8-position revolving tool changer mounted on X-carriage• Measuring Systems: Digital tool length presetter (for diameters up to 130 mm)• Software: BH660 PC-based control with WRT (Windows Real Time), bSolid (3D CAD/CAM), bSolid 3-Axis & 5-Axis machining modules, bNest (Nesting module), bSolid File Import Module• Additional Features:• LED light strip for work area illumination & L-shaped LED projector for vacuum pod positioning• Ionizer for static charge reduction on plastics• Tool lubrication system (air-oil mist) for non-ferrous material processing• Wired remote control pad• Uniclamp adapters (4x) and Uniclamp clamping devices (4x, H=74mm)• Vacuum modules: 6x (132x146 H74mm), 4x (132x75 H74mm), 4x (132x54 H74mm)• Air cushion blower for easy loading/unloading• Barcode scanner (1D wireless)• UPS backup for machine PC (7-10 min power backup)• Power Supply: 400 V / 50 Hz, 3-phase (without neutral conductor), voltage tolerance +/-10%Safety Standard: CE / UKCA with Full Bumper safety system and protective enclosure

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, workpiece length (max.): 4,600 mm, workpiece width (max.): 1,935 mm, overall weight: 6,200 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, This 5-axis BIESSE ROVER C9.5 Conf.3 was manufactured in 2010. Machine is still working in it original, first-time installation place here in Norway. Dkodpfx Aez Arvtsl Aou All yearly services done by Biesse support. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), 5 vertical and 2 horizontal spindles, 5-axis electric spindle 11 kW HSK F63 4-axis electric spindle 11 kw HSK 63 3 units for storing of the tools. ETS system for positioning of 8 support beams and 32 vacuum cups 250 m3 Busch vacuum pump. Central lubrication Biesse Work Advantage version . It boasts high travel speeds (X/Y: 100 m/min, Z: 30 m/min) For all technical specification please read included data sheet below. If you are looking to get high-quality woodworking capabilities, consider the BIESSE ROVER C9.5 machine we have for sale. Please contact Rekman Maskin & Service for future information. Rekman Maskin & Service work with Biesse machine since 1986

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Working area X: 3855 mm Working area Y: 1650 mm Z-axis workpiece clearance: 245/290 mm 5-axis electrospindle, HSK F63 mounting Main electrospindle power: 16 kW Drilling spindles for vertical drilling: 5 Drilling spindles for horizontal drilling X: 2 Drilling spindles for horizontal drilling Y: 2 22-position chain-type tool changer Work table with 8 rails Automatic EPS tables Software: Biesse bSolid Vacuum pump with a capacity of 250 m3/h Chip conveyor belt Safety guards Safety device compliant with CE standards, with impact bar and double light curtain Approximate weight: 5800 kg Djdpfx Alez Hxmqe Asku Only 2774 operating hours Includes Uniclamps for window and door frames Available immediately

Condition: used, Year of construction: 2008, input voltage: 400 V, input frequency: 50 Hz, number of slots in tool magazine: 8, Equipment: CE marking, Biesse Rover ROVER A 3.40 FT K2 CNC machining centre Description Working fields: X = 3685 mm; Y = 1290 mm; Z = 160 mm The composition includes: Automatic lubrication system FT Work Table 4 front stops + 4 back stops equipped with pneumatic system and sensors. 4 side stops equipped with pneumatic system and sensors. Vacuum tank Vacuum system for 2 300 m3/h pumps 300 m3/h rotary claw vacuum pump 12 kW (16.1 HP) Electrospindle with ISO 30 adaptor, air cooled Djdpszqdqlofx Al Aeku Blowing unit Flange for the assembly of aggregates on the electrospindle Prearrangement for operating device with 360° interpolation and gear transmission. Boring head BH 21 L Revolving tool changer with 18 places Prearrangement for the assembly of the automatic unloading device for nested-based machined panels Controls on remote keyboard Numerical Control XP600 User-friendly interface BIESSEWORKS - Advanced programming system BIESSE NEST Module Air conditioner for electric cabinet Inverter Safety devices with 2 mats and low fencing CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Working area X: 3280 mm Working area Y: 1320 mm Working area Z: 170 mm 13.2 kW electrospindle Drilling heads for vertical drilling: 10 Drilling heads for horizontal drilling X: 4 Drilling heads for horizontal drilling Y: 2 Blade for grooving in the X direction 12-position revolver tool changer Work table with 6 rows Programming software: BiesseWorks 90 m3/h vacuum pump Safety mats Protective netting Dedpfx Aez A Iglol Aeku Approximate weight: 3000 kg Door and cone grooving unit with ISO30 connection available at an extra cost.

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X axis: 4,300 mm X axis pendulum operation: 1,620 mm Y axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X axis: 3,300 mm X axis pendulum operation: 600 mm Y axis: 1,240 mm Work table: Djdpfx Alsxraime Ajku 8 ATS workpiece supports with 3 vacuum cups each 8 rear workpiece stops, program-controlled lowering, each mounted in one support 8 workpiece stops, 670 mm from rear, each mounted in one support 2 + 2 lateral workpiece stops 4 removable center stops 6 lift rails, pneumatically program-controlled lowering, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate work zones along the X axis Vacuum assist system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW in S1 operation), HSK 63 F Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Clockwise and counter-clockwise rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the edge banding process Tool magazine for 16 tools Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360 degree endless rotation Glue application for hotmelt adhesive Double pressure roller, interchangeable and can be switched off Heating lamp for preheating edge band material End trim unit to cut the edge band material at an 8-degree angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) (Best results achieved using wood edges with primer from 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. inside radius 18 mm for edge thickness less than 1 mm Min. inside radius 30 mm for edge thickness 2 mm Min. panel size for edge banding: 300 x 300 mm Min. size for edge banding of internal cutouts: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety equipment: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Units: - Flush/radius trimming unit - Combination profile/flat scraper unit - Sawing unit

Condition: used, Year of construction: 2011, Colour: White Empty weight: 3.000 kg - Year: 2011 - Documentation available: No - CE certificate present: No - Serial number: 56604 - Drilling unit present: Yes - Saw unit present: Yes - Vacuum pump present: Yes - Tools included: Yes - Transport weight [kg]: 3000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dkodpezy Nb Iofx Al Aeu Yorick Diebels

Condition: used, Year of construction: 2005, 2005 BIESSE ROVER B 4.40 FT 3-axis CNC machining center Dkodpfx Aoy Ud Sgsl Asu Technical features in the last photo Engine hours on: 45,343 Machine hours in automatic operation (work): 27,267

Year of construction: 2001, condition: ready for operation (used), Biesse Rover 22 CNC machining centre Year of manufacture 2001 SN 07498 Working range 4 axes X-axis 3060 mm Y-axis 1080 mm Z-axis 155 mm 6 consoles with 18 vacuum cup holders 4 pneumatic bakelite bars for lifting the platen Vertical electrospindle 7,5 kW with automatic tool change, ISO 30 taper Automatic tool change 7 positions on the working head Dedpfx Ajggxihsl Aeku Drilling head with 20 spindles arranged as follows: 7 vertical in X-axis 7 vertical in Y-axis 4 horizontal in X-axis 2 horizontal in Y-axis Grooving saw 120mm Safety tread mats 110 m3 / h vacuum pump CE marked Weight 3500 Kg Technical specifications subject to change

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm Dedpfxougpwno Al Asku 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: excellent (used), "NESTING" CELL with 3-axes (X-Y-Z+ C-axis capability) CNC working Center, composed by: 200029A) AUTOMATIC LOADING/IN-FEEDING SYSTEM (type A 1563) also for thin panels, with scissor table, movable arm (NC positioning Sweeping Arm) with vacuum suction cups, Dedpszxrnbefx Al Asku 200029B) CNC "nesting" 3-axes (flat table) "BIESSE" Mod. Rover A - FT 1531 Gantry-drive (axe X) machine Numerical Control (WRT) with Software bSolid (3D CAD-CAM) + bNest (SOPHIA - IoT Connection) Safety cabin (enclosure) of the working head Bumper Unique flat working table FT Automatic Tools Changing System with two (2) Tools storage plates 1st Tools storage plate with 16 folds (on X axe) + 2nd storage (revolver-type) with 8 folds (on Y-axe) Max. useful working area (X - Y - Z) mm 3100 x 1560 x 170 No. 8 Working areas (Multizone) - No. 3 Vacuum pumps (capacity 250 m3/h each) Separate electric and command cabinet - Total installed power (Kw) 31,21 WORKING GROUPS (TOP): No. 14 independent vertical boring spindles (7 in X + 7 in Y) No. 4 independent horizontal boring spindles (2 in X + 2 in Y) Drilling head BH 18 motor-power (Kw) 3 ca. No. 1 vertical Electro-spindle HSK F63 (Kw) 13,2 200029C) AUTOMATIC OUT-FEEDING SYSTEM (type 1531) with motorised belt (length mm 3740)

Condition: excellent (used), 200030A) C.N.C. WORKING CENTER "NESTING" with 3-axes "BIESSE" Mod. Rover A - FT 1531 Gantry-drive (axe X) machine Numerical Control with Software bSolid (3D CAD-CAM) + bNest Safety cabin (enclosure) of the working head Bumper Unique flat working table FT Automatic Tools Changing System with Tools storage plates Storage (revolver-type) with 8 folds (on Y-axe) Dkedpfxjzygiie Al Asu Max. useful working area (X - Y - Z) mm 3100 x 1560 x 60 Vacuum pump 1 x 300 m3/h Separate electric and command cabinet WORKING GROUPS (TOP): No. 14 independent vertical boring spindles (7 in X + 7 in Y) No. 4 independent horizontal boring spindles (2 in X + 2 in Y) Drilling head BH 18 motor-power (Kw) 3 ca. No. 1 vertical Electro-spindle HSK F63 (Kw) 13,2 200030B) UNLOADING with roller conveyor (length approx. 3,500 mm)

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, Equipment: CE marking, Biesse Rover A 1343 CNC machining centre 5-Axis Description Rover A ATS CNC Machining Centers Working ranges X = 4,320 mm; Y = 1. 326 mm;Z = 170 mm Waste conveyor belt Automatic lubrication system Remote console 1 x 250 m3/h vacuum pump for standard system Auxiliary vacuum system for double working area machine Multi-zone 8 bars and 24 cups with automatic positioning (ATS-EPS X-Y) 8 reference stops with 115 mm rear stroke 8 front reference stops with 140 mm stroke positioned at a height of 1190 mm from the rear stops 4 side stops, with 140 mm stroke (2 right + 2 left) with implant 2 additional side stops, with 140 mm stroke (1 right + 1 left) Pneumatic system for panel lift Coolant control unit to replace the heat exchanger supplied with 13kW 5-axis units. Operating unit 5 interpolating axes 13 kW (17.4 Hp), HSK F63 connection, liquid-cooled. BiesseWorks Advanced Machine Chain tool magazine with 33 places - centre distance 120 mm (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland Djdpfx Asy U Naisl Ajku

Condition: used, Year of construction: 2014, Main spindle power: 13.2 kW Drilling unit motor power: 7 kW 3-axis machine Drilling unit: Technical data - Nut saw - 2 horizontal drilling spindles in the X-axis (left/right) - 1 horizontal drilling spindle in the Y-axis (left/right) Dsdozuwxdepfx Al Asku - 10 vertical drilling spindles

Condition: used, Year of construction: 2001, Equipment: CE marking, Biesse Rover ROVER 24 FT CNC machining centre Description The work surface consists of a grid table consisting of two phenol tables with a size of 1540 x 1250 mm that can be linked. The grid table has a grid of 30 mm and vacuum openings of 9 mm in a grid of 150 mm in the X and Y-richting. The grid table is equipped with 6 pneumatic zero point cams at the rear and 1 on the left and right sides. • The working range of the machine is 3100 x 1300 x 155 mm. (Z-stroke 250 mm ) • The speed on the X-axis is programmable between 0 and 100 m/min. • The speed on the Y-axis is programmable between 0 and 100 m/min. • The speed on the Z axis is programmable between 0 and 15 m/min. • The three axes are driven by brushless digital DC servo motors. CNC numerical control type NC-500 Milling motor with automatic change system with ISO30. The power of this milling motor is 10.5 hp at 24,000 rpm 10-position tool changer that moves with the unit Drilling unit with fourteen independent drill spindles Groove saw Static frequency converter Centralized pneumatic system Centralized lubrication system Vacuum pump with a capacity of 250 m3/hour Two push-button control panels Working pressure for air 6 kg/cm2. Voltage 380 Volt, 50 Hz. Safety mats on the front. CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland Dsdpfx Alezqtzts Asku

Condition: used, Year of construction: 2009, Biesse Works Control Working range on X axis mm 3500 Working range on Y axis mm 1585 Working stroke in Z axis mm 350 N ° 2 work fields Bar worktop No. 8 adjustable bars N° 4 pneumatic Bakelite bars for lifting the panel No. 3 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 4-axis vertical electrospindle (Vektor), with automatic tool change, HSK type cones 10-position rotary tool change system on the operating head 24-position chain tool change system - located on the rear of the chain machine Drilling head with vertical and horizontal spindles composed as follows: n. 12 vertical spindles in X n. 12 vertical spindles in Y n. 6 horizontal spindles in X n. 4 horizontal spindles in Y n. 1 independent blade for making X-grooves Front protection and safety system with carpets Perimeter protection grids Chip evacuation system with motorized belt Air conditioning system for cooling and cleaning of machine control Vacuum pump 250mc/h TECHNICAL DETAILS TO BE CHECKED Dkjdpfx Asw D Dhael Aou

Condition: used, Year of construction: 2006, Numerical Control XP 600 Working range on X-axis mm 3060 Working range on Y axis mm 1140 Working range in Z axis mm 160 N ° 2 work fields Bar worktop No. 6 adjustable bars for suction cup support No. of pneumatic bakelite bars for panel lifting (?) No. 2 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 vertical electrospindle with C-axis 12 kW motor 10-position tool change system - positioned on the drilling head of the machine, ISO 30 type cones BH19L drilling head with 18 spindles arranged as follows: - No. 7 verticals on X axis - N° 6 verticals in Y axis - N° 4 horizontal on X axis - No. 2 horizontals on Y axis - No. 1 independent blade group for making grooves on the X axis Front protection and safety system with photocells Automatic lubrication system (?) Air conditioning system for cooling and cleaning of machine control Vacuum pump mc/h 250 TECHNICAL DETAILS TO BE CHECKED Dodsv Aacfopfx Al Aoku

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Working area X: approx. 3765 mm Dsdpozccfyjfx Al Asku Working area Y: approx. 1560 mm Working area Z: 170 mm 5-axis electrospindle, without drilling units Tool changer with approx. 16 positions Work table: Nesting table Software: bSolid 2 Busch MM 1322 vacuum pumps Automatic panel loading system Automatic panel unloading system with motorized transfer Protective screens Weight approx. 3700 kg. Available January 2027

Condition: used, Year of construction: 2017, machine/vehicle number: 1000025340, functionality: fully functional, travel distance X-axis: 6,735 mm, travel distance Y-axis: 1,650 mm, travel distance Z-axis: 245,290 mm, workpiece height (max.): 60 mm, controller manufacturer: Biesse BH 660, bSolid, bEdge, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 85 m/min, rapid traverse Y-axis: 85 m/min, Assembly of the the machine could be done by our subcontractor on the agreed price. Dsdpfeycvcxex Al Asku

Condition: used, Year of construction: 2019, Numerical control with bSolid software The multi-document software application in Windows environment allows the design of the finished product, the definition of its processes, the definition of the work plan, the simulation of the piece machining operations on the 3D model of the machine and generation of the necessary machine programs. bSolid - 3-Axis Machining bSolid - 5-Axis Machining Module for surface machining with 5-axis units and interpolation movements on all 5 available axes (X,Y,Z,C,B). The module includes the following commands: · assignment to surfaces three-dimensional roughing and finishing operations · spread or project a path onto a curved surface machining lying on a plane · follow 2D or 3D curves with any type of tool bSolid - 3D Engraving bSolid - Import external formats Fields of work: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H=74 mm Z = 245 mm with modules H=29 mm Loadable piece in Y: * 1650 mm, with thickness up to 60 mm on H=74 mm modules * 1600 mm, with thickness over 60 mm on H=74 mm modules. 10 ATS floors – 40 trolleys The code includes: • 2 aluminium bars (n. 1 left and n. 1 right) on which the lateral stops slide. • 10 aluminum worktops. The worktops slide on hardened and ground linear guides using recirculating ball bearing slides. Locking occurs on both linear guides, front and rear, by means of four pneumatic cylinders. The control is activated by a button located in front of the work surface. The carriages slide on steel guides positioned above the extrusion. Pneumatic locking system divided into 2 locking zones in X Automatic positioning (EPS) for worktops. "EPS" (Electronic Positioning System) device for the automatic positioning by NC of the work surfaces and trolleys complete with locking devices capable of eliminate possible operator errors. Rear row stop, with 140 mm stroke Intermediate row stop, positioned at 405 mm, with 140 mm stroke. Front row stop, positioned at 1460 mm, with 140 mm stroke 4 lateral stops, with 140 mm stroke (2 right + 2 left) with system 2 additional side stops, with 140 mm stroke (1 right + 1 left). Sensor for checking whether the stops have descended 12 clamping devices for clamping narrow workpieces 6 loading aid bar lifts, for H=74 mm modules Configuration 5A, for Rover B. Configuration for high productivity and flexibility, thanks to the two operating groups 4 and 5 axes and the possibility of performing tool changes in concurrent time. It includes the axes and carriages for the movement of the main operating groups. Includes 2 inverters. Second Y-axis. Introduces the separation of the front and rear Y-carriages, with independent motorization. The two Y-carts have a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 connection, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 service. • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 service. • Bearings ceramics. • Right and left rotation. • Rotation speed from 1,000 to 24,000 rpm programmable by NC. • The release pneumatic operation is carried out via a prismatic linear guide and recirculating ball bearings. A cover is included for chip extraction, with 6 different positions in Z managed by the NC, depending on the length of the tool, or by program. The suction mouth is automatically closed when the electrospindle is not working. Provision for subsequent installation of the 360° operating group (C-axis) Revolver tool maga... Dedow D E A Eopfx Al Asku